The effect of low solubility organic acids on the hygroscopicity of sodium halide aerosols

In order to accurately assess the influence of fatty acids on the hygroscopic and other physicochemical properties of sea salt aerosols, hexanoic, octanoic or lauric acid together with sodium halide salts (NaCl, NaBr and NaI) have been chosen to be investigated in this study. The hygroscopic properties of sodium halide sub-micrometre particles covered with organic acids have been examined by Fourier-transform infrared spectroscopy in an aerosol flow cell. Covered particles were generated by flowing atomized sodium halide particles (either dry or aqueous) through a heated oven containing the gaseous acid. The obtained results indicate that gaseous organic acids easily nucleate onto dry and aqueous sodium halide particles. On the other hand, scanning electron microscopy (SEM) images indicate that lauric acid coating on NaCl particles makes them to aggregate in small clusters. The hygroscopic behaviour of covered sodium halide particles in deliquescence mode shows different features with the exchange of the halide ion, whereas the organic surfactant has little effect in NaBr particles, NaCl and NaI covered particles experience appreciable shifts in their deliquescence relative humidities, with different trends observed for each of the acids studied. In efflorescence mode, the overall effect of the organic covering is to retard the loss of water in the particles. It has been observed that the presence of gaseous water in heterogeneously nucleated particles tends to displace the cover of hexanoic acid to energetically stabilize the system.

Uso das técnicas de microbalança de cristal de quartzo e espectroscopia fotoacústica para estudo e monitoramento do processo de fotocura de resinas odontológicas

As resinas fotocuradas são amplamente utilizadas em odontologia. Este processo de cura é assistido pela luz visível que promove ligações químicas que as endurecem. Nesta dissertação, as resinas odontológicas fotocuradas comerciais das marcas Opallis Flow A1, A2, AO 3,5, T, Opallis DA2, Natural Flow e Ebecryl 3720-TP25 foram caracterizadas empregando as técnicas de microbalança de cristal de quartzo (QCM) e espectroscopia fotoacústica (PAS) à temperatura ambiente. A espectroscopia fotoacústica foi utilizada para avaliar a região do espectro eletromagnético responsável pela fotocura das resinas odontológicas. Desta forma, conhecendo-se o comprimento de onda da absorção da resina, possibilitou realizar o processo de fotocura. Adicionalmente, foi possível monitorar o processo de fotocura com a técnica de microbalança. A frequência de ressonância do cristal da microbalança se modifica com a fotocura das resinas estudadas. Deste modo, foi possível estimar por QCM, o tempo de cura para os comprimentos de ondas caracterizados por PAS.

Obtenção de nanocompósitos a partir da co-coagulação da borracha nitrílica e hidrotalcita

Partículas nanoestruturadas têm sido amplamente utilizadas como carga de reforço em matrizes elastoméricas, sendo substitutos eficazes das cargas convencionais, já consagradas, como o negro de fumo, mica, sílica. Em especial, as argilas têm mostrado grande potencial ao que se refere a melhor dispersão na matriz polimérica, em função de sua elevada razão de aspecto. Dentro do vasto universo de argilominerais, as argilas aniônicas, também conhecidas hidróxido duplo lamelar (HDL), apresentam como vantagem a possibilidade de ser projetada estruturalmente para as mais diversas finalidades, ao se modificar os ânions ou os cátions, ou até mesmo combiná-los na estrutura lamelar. E dentre os métodos existentes para se preparar compósitos a base de elastômero/argila, a co-coagulação do látex, é uma forma bastante eficaz e economicamente viável, uma vez que a borracha obtida após processo de coagulação já contém a carga incorporada. Este trabalho se dedicou a avaliar o processo de co-coagulação do látex de NBR e HDL, visando a obtenção de nanocompósitos. Para tanto HDL de composição Mg/Al-CO3 foi modificado com ânions DS, DBS e ST e foram preparadas suspensões aquosas, utilizando como ferramentas de dispersão ultraturrax e ultrassom de ponteira. As variáveis de processo avaliadas foram tipo e teor de HDL, tempo de mistura látex/suspensão aquosa de HDL, quantidade de coagulante e velocidade de agitação. Por fim, os coágulos obtidos foram formulados para avaliar a influência dos HDL na cinética de vulcanização e também para determinação das propriedades mecânicas convencionais. Os resultados obtidos comprovaram que a metodologia de dispersão de hidrotalcita ao látex nitrílico de modo prévio ao processo de coagulação é uma alternativa viável para a obtenção de nanocompósitos. O uso do ultrassom de ponteira como ferramenta na dispersão aquosa de HDL contribuiu para maior estabilidade da suspensão e o ajuste nos parâmetros do sistema de coagulação, levaram a obtenção de grumos uniformes do ponto de vista macroscópico e microscópico. As micrografias dos coágulos não vulcanizados obtidas por MEV-FEG confirmaram as informações apuradas a partir dos difratogramas de raios-X que apontou a formação de um sistema parcialmente esfoliado, em função da ausência dos picos característicos da hidrotalcita, além de indicarem a coexistência de partículas em dimensões micrométrica a nanométricas em uma mesma estrutura. A composição química do HDL, com a presença de átomos de magnésio e alumínio combinados com grupos hidroxila favoreceu a redução tanto o tempo de indução como de pré-cura. As propriedades mecânicas que se mostraram mais sensíveis ao grau de dispersão da carga foram a dureza, a deformação permanente à compressão (DPC) e o módulo de tração a 300% de deformação (E300), em especial para os compósitos contendo 10% m/m de HDL natural e modificado com estearato. A resistência à chama dos nanocompósitos de NBR-HDL vulcanizados apresentou um ligeiro aumento quando comparados à NBR pura, visto que esta é uma característica própria da hidrotalcita, decorrente da sua composição química

Estabelecimento de culturas de raízes in vitro e avaliação da produção de metabólitos secundários de Cleome spinosa Jacq. (Cleomaceae)

Cleome spinosa é uma espécie herbácea de uso na medicina popular, especialmente no Nordeste do Brasil. A cultura in vitro de raízes adventícias da espécie foi iniciada com segmentos radiculares (0,5 e 1,0 cm) obtidos a partir de duas fontes de explantes: plantas propagadas in vitro e plantas oriundas do processo de germinação in vitro. Os explantes foram inoculados em meio MS líquido suplementado ou não com as auxinas ANA, AIA e AIB em diferentes concentrações (0,5; 1,0; 1,5; 3,0; 5,0 mg.L-1). As culturas foram mantidas em sala de crescimento, sob agitação (100 rpm) e sob fotoperíodo de 16h ou no escuro, com subculturas a cada 45 dias. Explantes oriundos de plantas propagadas in vitro também foram cultivados em meio contendo a citocinina BAP em associação com auxinas, na presença de sorbitol (isoladamente ou em associação com sacarose), em meio MS contendo redução na concentração total de sais minerais (MS1/2 e MS1/4) e em meio sólido. Os resultados mostraram que a adição de auxinas ao meio de cultura foi essencial à multiplicação das raízes, uma vez que em meio MS0 ocorreu significativo desenvolvimento de brotos. A suplementação com ANA não foi eficiente para a produção de raízes e acarretou no calejamento dos explantes, enquanto que a presença de AIA e AIB resultaram na multiplicação das raízes. Ainda assim, independentemente das manipulações realizadas no meio de cultivo, a capacidade de multiplicação mostrou-se reduzida. Uma expressiva multiplicação de raízes foi observada em culturas iniciadas a partir de explantes oriundos de plantas obtidas por germinação in vitro. A maior produção de biomassa foi alcançada em culturas iniciadas com segmentos radiculares de plantas obtidas por germinação in vitro cultivadas em meio contendo com 3,0 mg.L-1 de AIB e mantidas no escuro. Culturas estabelecidas nas melhores condições para acúmulo de biomassa foram acompanhadas por três subculturas, sendo avaliados períodos de cultura de 45 dias e de 60 dias. Culturas mantidas a intervalos de 45 dias apresentaram maior produção de raízes durante a segunda subcultura, enquanto que para o intervalo de 60 dias, embora tenha sido observada a capacidade de multiplicação das raízes, a maior produção de biomassa ocorreu nos primeiros 60 dias de cultivo. A partir de materiais in vivo e in vitro foram realizadas extrações com solventes de polaridade crescente (hexano, diclorometano, acetato de etila e metanol) e os extratos foram submetidos a avaliações cromatográficas. As análises por cromatografia em camada delgada mostraram a presença de terpenos nos extratos obtidos com hexano e diclorometano, tanto em material obtido a campo como naqueles produzidos in vitro e de compostos fenólicos nos extratos em acetato de etila obtidos a partir de material de campo. Pelas análises por cromatografia líquida associada à espectrometria de massas foi possível observar a presença de flavonoides nas culturas in vitro, não detectados no material de campo. As análises por cromatografia de fase gasosa associada à espectrometria de massas apontaram a presença de esteroides nos extratos em hexano de raízes coletadas a campo e nas culturas in vitro de raízes. Os resultados obtidos mostraram a viabilidade da produção de culturas de raízes in vitro para a espécie C. spinosa e o potencial deste material para a produção de substâncias bioativas, algumas não encontradas em material coletado a campo

Implications of using On-Farm Flood Flow Capture to recharge groundwater and mitigate flood risks along the Kings River, CA

Two large hydrologic issues face the Kings Basin, severe and chronic overdraft of about 0.16M ac-ft annually, and flood risks along the Kings River and the downstream San Joaquin River. Since 1983, these floods have caused over $1B in damage in today’s dollars. Capturing flood flows of sufficient volume could help address these two pressing issues which are relevant to many regions of the Central Valley and will only be exacerbated with climate change. However, the Kings River has high variability associated with flow magnitudes which suggests that standard engineering approaches and acquisition of sufficient acreage through purchase and easements to capture and recharge flood waters would not be cost effective. An alternative approach investigated in this study, termed On-Farm Flood Flow Capture, involved leveraging large areas of private farmland to capture flood flows for both direct and in lieu recharge. This study investigated the technical and logistical feasibility of best management practices (BMPs) associated with On-Farm Flood Flow Capture. The investigation was conducted near Helm, CA, about 20 miles west of Fresno, CA. The experimental design identified a coordinated plan to determine infiltration rates for different soil series and different crops; develop a water budget for water applied throughout the program and estimate direct and in lieu recharge; provide a preliminary assessment of potential water quality impacts; assess logistical issues associated with implementation; and provide an economic summary of the program. At check locations, we measured average infiltration rates of 4.2 in/d for all fields and noted that infiltration rates decreased asymptotically over time to about 2 – 2.5 in/d. Rates did not differ significantly between the different crops and soils tested, but were found to be about an order of magnitude higher in one field. At a 2.5 in/d infiltration rate, 100 acres are required to infiltrate 10 CFS of captured flood flows. Water quality of applied flood flows from the Kings River had concentrations of COC (constituents of concern; i.e. nitrate, electrical conductivity or EC, phosphate, ammonium, total dissolved solids or TDS) one order of magnitude or more lower than for pumped groundwater at Terranova Ranch and similarly for a broader survey of regional groundwater. Applied flood flows flushed the root zone and upper vadose zone of nitrate and salts, leading to much lower EC and nitrate concentrations to a depth of 8 feet when compared to fields in which more limited flood flows were applied or for which drip irrigation with groundwater was the sole water source. In demonstrating this technology on the farm, approximately 3,100 ac-ft was diverted, primarily from April through mid-July, with about 70% towards in lieu and 30% towards direct recharge. Substantial flood flow volumes were applied to alfalfa, wine grapes and pistachio fields. A subset of those fields, primarily wine grapes and pistachios, were used primarily to demonstrate direct recharge. For those fields about 50 – 75% of water applied was calculated going to direct recharge. Data from the check studies suggests more flood flows could have been applied and infiltrated, effectively driving up the amount of water towards direct recharge. Costs to capture flood flows for in lieu and direct recharge for this project were low compared to recharge costs for other nearby systems and in comparison to irrigating with groundwater. Moreover, the potentially high flood capture capacity of this project suggests significant flood avoidance costs savings to downstream communities along the Kings and San Joaquin Rivers. Our analyses for Terranova Ranch suggest that allocating 25% or more flood flow water towards in lieu recharge and the rest toward direct recharge will result in an economically sustainable recharge approach paid through savings from reduced groundwater pumping. Two important issues need further consideration. First, these practices are likely to leach legacy salts and nitrates from the unsaturated zone into groundwater. We develop a conceptual model of EC movement through the unsaturated zone and estimated through mass balance calculations that approximately 10 kilograms per square meter of salts will be flushed into the groundwater through displacing 12 cubic meters per square meter of unsaturated zone pore water. This flux would increase groundwater salinity but an equivalent amount of water added subsequently is predicted as needed to return to current groundwater salinity levels. All subsequent flood flow capture and recharge is expected to further decrease groundwater salinity levels. Second, the project identified important farm-scale logistical issues including irrigator training; developing cropping plans to integrate farming and recharge activities; upgrading conveyance; and quantifying results. Regional logistical issues also exist related to conveyance, integration with agricultural management, economics, required acreage and Operation and Maintenance (O&M).

Preparação, caracterização e avaliação de nanocompósitos de PBAT/amido de milho e vermiculita organofilizada

Nos últimos 20-30 anos polímeros biodegradáveis vêm sendo estudados e desenvolvidos e atualmente já são comercializados. Contudo, o custo, a processabilidade e algumas propriedades ainda dificultam a penetração desses polímeros no mercado e a competição com as chamadas commodities. Não são poucos os autores que se dedicam a desenvolver aditivos e formulações para superar essas limitações. Desta forma, esta Tese se dedicou ao desenvolvimento de compósitos de Ecobras, fabricado pela Basf e comercializado pela Corn Products, utilizando como carga mineral resíduo da extração da bauxita, no município de Santa Luzia/PB, o qual consiste em sua totalidade de vermiculita. Esta vermiculita foi quimicamente modificada com sais de alquil fosfônio para melhorar a compatibilidade com a matriz polimérica e também espaçar as camadas de aluminossilicato. De fato, a modificação com o brometo de hexadecil tributil fosfônio resultou na esfoliação da vermiculita tornando-a potencialmente apropriada para a obtenção de nanocompósitos. A preparação dos compósitos foi realizada pelo método de intercalação no estado fundido e foram comparadas a utilização da câmara interna de mistura e da mini extrusora de dupla rosca, sendo esta última mais eficaz na dispersão da vermiculita, conforme revelado pela microscopia eletrônica de varredura, difração de raios-X e reometria de placas. O grau de dispersão também foi influenciado pela estrutura química do modificador da vermiculita e pelo teor dessa carga incorporada à matriz. Teores mais elevados levaram a formação de aglomerados, enquanto a modificação da carga implicou na formação de micro e nanocompósitos. Ainda houve alterações das propriedades térmicas com aumento dos valores da temperatura de transição vítrea, de cristalização e fusão, embora o grau de cristalinidade tenha sido mantido. Nitidamente, foram obtidos materiais mais rígidos, com maior módulo e menor capacidade de deformação. Cerca de 58% de perda de massa foi observada para os micro e nanocompósitos obtidos após 17 semanas de enterro em solo simulado para avaliação da biodegradabilidade, valor bem próximo ao Ecobras puro. De modo geral, a incorporação das diferentes vermiculitas retardou nas primeiras semanas a biodegradação, provavelmente em função de modificações na estrutura cristalina, conforme sugerido pelos maiores valores de temperatura de fusão observados durante o acompanhamento do processo de biodegradação. No entanto, após 7 semanas os perfis de biodegradação dos micro e nanocompósitos se aproximaram bastante do Ecobras puro. Desta forma, foi possível nesta Tese obter um nanocompósito de Ecobras com vermiculita modificada com brometo de hexadecil fosfônio utilizando ferramentas comuns de processamento no estado fundido com biodegradabilidade próxima ao polímero de partida, porém mais rígido e menos deformável

青蒿的遗传转化及青蒿素生物合成的调控

利用发根农杆菌(Agrobacterium rhizogenes)1601，1000，1500，15834，A4，均成功地转化了中药青蒿(Artemisia annua L.)并且建立了pRi1601，pRi15834，pRiA4诱导的发根培养。pRi1601，pRi15834的发根诱导率比其它质粒高。太老或太幼的叶片不利子发根的诱导;发根主要从叶脉的伤口处萌发;带顶芽或带侧芽的叶片容易诱导根，但不一定是发根。光照有利于发根的诱导和发根的生长。以每个发根的“绝对生长速率”(Gtowth Ratio，GR)和绝对“侧根”数量(Number of Side Roots，NSR），通过大量的发根系的筛选，建立了8个发根系，1601-L-1, 1601-L-2, 1601-L-3, 1601-L-4, 15834-L-1, 1601-P-I, 16 01-P-2，15834-L-2。Southern分子检测表明，160l-1-1，1801-L-2, 1601-L-3，1601-L-4，1601-P-1，1601-P-2均为转化子。8个建立的发根系之间无论生长或者QHS的合成存在明显的差异。比较光／暗(16/8hrs)，25℃条件下培养的16 01-L-1，1601-L-2，1601-L-3，1601-L-4，1601-P-l，和1601-P-2，其中16 01-L-3的生长最快，160l-L-1的生长最慢;但是，1601-L-1的QHS的含量最高（可达1. 048%），1601-1-3的QHS的含量最低。160Z-L-3，15834 -L-1和2583:1-L-2的生长速率相差不大。用盛有l000mLMS液体培养基的3000mL的锥形瓶扩大培养1601-L -3，15834-L-1和15834-L-2，转速为ll0rlpm，培养过程中发根容易形成发根球（Hairy Root Balis，HRB），HRB的形成严重影响发根的生长和QHs的合成，HpLC分析表明扩大培养发根中QHS的含量比较低。 改变MS基本培养基中的无机离子的浓度，研究不同无机离子对发根生长和QHS的合成的影响。 l、KN03为18.79×10-3M时有利于1601- L-1生长，为14. 84×10-3M时有利于QHS的合成。NH-4N0-3浓度在10.93-12. 49×10—3M范围内有利于1601-L-1生长，在0-20.62×10-3M范围内对QHS的合成影响不大，大于20. 62×lO-3M不利QHS的合成。培养基中NH-4+／N0-3-比值为0. 37-0. 4-0.52:1时有利于发根的生长，比值为0.52 - 0.58:1时有利于QHS的合成。 2、H-2P0-4-浓度为2.498×10-3M时有利于发根的生长在0-2. 498×l0-3M范围内，随着浓度的提高，促进发根的生长。培养基中的H2P4 -的浓度在0-1.249×lO-3M的范围内，随着浓度的提高，促进QHS的合成，为1.249×10-3M时QHS的含量最高。 3、培养基中最适16 01-L-1生长的Ca-2+浓度为0.198- 0.766×10-3M，大于或小于该浓度范围，显著地抑制发根的生长。但是，在0-3.695×10-3M范围内，随着培养基中Ca-2+浓度提高，促进QHS的合成，最适Ca-2+浓度为3.695×l0-3M。 4、培养基中不加Mg-2+时，完全抑制发根生长，在0. 142×10-3M-7.506×l0-3M浓度范围内，对发根生长影响没有明显的差别。但是，HPLC和UV分析发根中QHS含量，培养基中不加Mg-2+时，发根中QHS含量最高。 5、培养基中的Fe-2+浓度在0. 25 -1．0×10-3M范围内，同时有利于16 01- L-1的生长和QHS的形成。 6、培养基中最适合予16 01- L-3生长的KI浓度为2.5ppm，大于或小予该浓度均显著地抑制发根的生长，培养基中加入KI明显地降低发根中的QHS的含量。 7、H2BO3对l601-L-l生长影响不大，HPLC分析QHS的含量，培养基中的H3BO3浓度为100ppm和400ppm，QHS的含量分别为1.69mg/g和1.80mg/g(DW)。 8、Cu-2+对1601-L-3的生长影响显著，最适合1601-L-3生长的Cu-2+浓度为1.00ppm，在0 -1.00ppm的浓度范围内，随着培养基中的Cu+浓度的提高，发根的生物量不断增加。培养基中QHS合成的最适Cu2+浓度为0.05ppm，大于或小于该浓度均显著地抑制发根中QHS的合成。 比较光培养和暗培养对发根生长的影响，结果表明光照明显地促进1601-L-l的生长，暗培养明显不利于发根的生长。最适合于发根生长的温度为25℃，大于35℃显著地抑制发根的生长，影响发根的根尖细胞的正常分裂。 改变培养基中的蔗糖浓度和在发根培养的不同时期给培养基中添加蔗糖，试验结果表明蔗糖作为碳源对1601-L-3和1601-L-1的生长具有显著的影响。 (1)培养基中缺少蔗糖显著地抑制发根的生长。 (2)发根培养的前5天时间内，蔗糖浓度为30- 60glL昀培养基最有利于发根的生长，50glL的培养基中的发根生长最快，培养基中的蔗糖浓度大于60g/L小于30g／L时，发根的生物量增加较少。 (3)发根培养至第15天时，蔗糖浓度为60g/L的培养基最有利予发根的生物量的增加。发根培养至30天时，蔗糖浓度为60-90g/L的培养基，发根的生物量的增加相差不大，但是为蔗糖浓度为30-40g/L的培养基中的发根生物量一倍。 (4)发根培养过程中，分别于第5和15天给蔗糖浓度为30g/L的培养基中添加一次或二次蔗糖，使培养基中的蔗糖终浓度相当于60g/L或90g/L，培养至30天时，添加蔗糖的培养基中的发根的干重生物量相当于不添加蔗糖培养基中的发根生物量一倍，相当于初始蔗糖浓度为60g/L和90g/L培养基中发根的生物量。 (5)随着培养基中蔗糖浓度的提高，发根干重/鲜重比显著增加。培养基中的蔗糖的消耗量与发根生物量的增加呈正相关，蔗糖消耗越多，发根生物量的增加越大。 比较pH值对发根生长和QHS合成的影响表明，灭菌前pH值在5.O-6.5范围内的培养基适合予1601-L-1的生长，小于5.O不利于发根的生长，pH5.8有利于1601-1-1生长和QHS的生物合成。发根收获时培养基中的pH值一般为4.5-5.2. pH7.O抑制发根的生长，pHl0.O对发根具有强烈的致死作用。发根在培养过程中，对培养基中的pH值具有显著的调节作用，发根能在很短的时间内(24- 48hrs)使pl:l值为5.8、6.4、7.0培养基降低到pH4. 5-5.2，pH为5.8的培养基有利于QHS合成。 比较不同基本培养基对发根生长和QHS合成的影响，试验结果表明N6、DCR、Litvay培养基有利于1601-L-1的生长，WS、White、B5培养基不利于发根的生长。DCR培养基中的QHS含量最高。 根据三水平试验选用三水平正交表来安排试验的原则，选用三水平正交表L7(3-)，研究多因子效应对发根生长和QHS合成的影响，试验结果表明，Mg2+，Fe2+，Mn-2+，NH4NO3，KN03 ,KI,Ca-2+为发根生长的主要因子，NH4N03，KNOs，Mg2+，Ca2+，肌醇为QHS合成的主要因子。 通过TLC分析发根中QHS和其它化学成分，同时比较发根和无菌苗及野生植株的化学成分，发根和无菌苗均能合成包括QHS在内的野生青蒿叶片中的大部分非挥发性的化台 物。 研究青蒿植株在发育过程中QHS的含量的变化以及发根、无菌苗和野生青蒿中QHS的合成，HP分析结果表明，l、不同的单株青蒿之间的QHS量相差很大。2、同一植株幼 叶的QHS含量比老叶的QHS含量高。3、不同单株青蒿之间达到最高QHS含量的时间不一样，开花期或开花之前。4、无菌苗（带根）或者不带根丛生芽均能合成QHS，但是带根的无菌蕾的QHS量比丛生芽中的QIS的含量高。5、不同发根农杆菌转化的发根系1601-L-1和15834-L-1都能合成ＱＨＳ。

A survey of the quality of salt cured fish produced in the Kanyakumari Disrict [i.e. District], Madras State

A survey of the quality of salt cured fish in Kanyakumari District, Madras State was done during the years 1963 and 1964 to obtain necessary basic information to formulate quality standards for these products which are gaining importance in the export trade. 155 trade samples of sun-dried, dry-salted, wet-cured and pit-cured fishery products were examined for their chemical quality and organoleptic characteristics. 26.5% of the sun-dried products, 25% of the wet cured fish, 55.21% of the dried salted products and none of the pit cured samples were found to be good in quality. The sun dried products were generally found to have heavy admixture of sand and were inadequately dried. The chief defects in the salt cured fish products were found to be the use of spoiled fish, imperfect cleaning and washing, use of impure salt, inadequate salting, curing and drying, and unhygienic conditions in all stages. Quality standards must be formulated for each variety of salt cured fish product and adequate measures taken to rectify the defects and enforce the quality standards.

Observations on the inhibitory effect of sodium chloride on molds met with in smoked fishery products

Even though smoke curing is a very elegant method of preserving fish, the resultant products have only a very restricted shelf-life, unless stored under refrigerated conditions. The main source of spoilage is the early setting in of a vigorous growth of moulds. This problem is of a serious nature even in temperate climatic conditions. In full and universal recognition of the gravity of the problem, the FAO conference on herring technology held in September 1950 at Bergen in Norway has recommended the problem of "means of prevention of mould growth in smoked products" for future research study. This note records an interesting observation made at this Laboratory on the inhibitory action of sodium chloride on the development of mould in smoked fishery products.

The 66 k-Da protein identified as a light meromyosin is involved in the setting of surimi

The 66 kilo-Dalton (k-Da) protein split off from the cross linked myosin heavy chain (CMHC) formed due to the setting of Alaska pollack surimi, frozen-storage of Pacific cod flesh, and vinegar-curing of Pacific mackerel mince was identified as a light meromyosin (LMM). Puncture and stress-relaxation tests showed that the actomyosin subunits (AMS) of Alaska pollack surimi, upon setting at 30°C, transformed into gel, although the elasticity of this gel was very low when compared to the gels from surimi or actomyosin (AM). Electrophoretic studies showed that the band due to LMM in the gel from AMS gradually disappeared with the progress of setting but higher molecular weight polymer did not form. The intensity of the bands due to other myosin sub-fragments decreased a little. The findings suggest that at setting temperature, LMM of MHC molecule leads to an unfolding resulting in an intramolecular aggregation through non-covalent interactions, and thus plays a significant role in the crosslinking of MHC.

Survey on the quality of Jaadi available [in] Sri Lankan market

A quality of survey was conducted at the fish curing yards in a northwest coast and the southern coast in Sri Lanka. A total of 40 samples different varieties of fishes were collected from the market and jaadi curing yards and all were evaluated for the quality, fungal and insect infestation. Samples were analyzed for proximate composition chemical, microbiological and sensory quality. Thirty percent of the total analyzed samples of fish were found to be unfit for consumption. Samples collected from Negombo were found to the infected with maggots. Only 42% samples had dry matter above 50%. All the samples showed a protein content above 20%. The highest protein content was 27.92% in hurulla. Over 90% of the samples had TVN at acceptable quality limits (>40). The TBC for 33% of the samples were in the range 104-105/g range, while 48% were in the range of 107-108/g due to contamination of maggots and fungi. The Survey showed jaadi had a high level of protein in its composition. But defects of curing process such on imperfect cleaning inadequate salting resulted in low (Chemical and microbiological) quality of the product.

Water quality of two semi-closed areas in the United Arab Emirates Coast along the Arabian Gulf:a comparative study

A comparative study was carried out between the two biggest creeks along the Arabian Gulf coast of the United Arab Emirates to evaluate impacts of sewage and industrial effluents on their hydrochemical characteristics. Surface and bottom water samples were collected from Abu Dhabi and Dubai creeks during the period from October 1994 to September 1995. The hydrochemical parameters studied were: temperature (21.10-34.00°C), salinity (37.37-47.09%), transparency (0.50-10.0 m), pH (7.97-8.83), dissolved oxygen (1.78-13.93 mg/l) and nutrients ammonia (ND- 13.12,ug-at N/1), nitrite (ND-6.66 ,ug-at N/1), nitrate (ND- 41.18 ,ug-at N/1), phosphate (ND- 13.06 ,ug-at P/1), silicate (0.68-32.50 ,ug-at Si/1), total phosphorus (0.26- 21.48 ,ug-at P/1), and total silicon (0.95- 40.32 ,ug-at Si/1). The present study indicates clearly that seawater of Abu-Dhabi Creek was warmer (28.l2°C) than Dubai (27.56°C) resulting in a higher rate of evaporation. Owing to more evaporation, salinity levels showed higher levels at Abu Dhabi (43.33%) compared to Dubai (39.03%) seawater. The study also revealed higher secchi disc readings at Abu Dhabi Creek (4.68 m) as compared to Dubai Creek (2.60 m) suggesting more transparency at Abu Dhabi Creek. Whereas, seawater of Dubai exhibited higher levels of pH (1.03 times), and dissolved oxygen (1.05 times) than Abu Dhabi seawater due to an increase in productivity. Meantime, seawater of Dubai showed higher tendency to accumulate ammonia (8.22 times), nitrite (10.93 times), nitrate (5.85 times), phosphate (10.64 times), silicate (1.60 times), total phosphorus (3.19 times), and total silicon (1.54 times) compared to Abu Dhabi seawater due to the enrichment of seawater at Dubai with domestic sewage waters which has distinctly elevated the levels of the nutrient salts particularly in inner-most parts of the creek leading to eutrophication signs. The changes occurred in the receiving creek water of Dubai as a result of waste-water disposal that have also reflected on the atomic ratios of nit: Effect of pollution rogen: phosphorus: silicon.

Penetration of sodium chloride during prolonged salting of fish

This work deals with adsorption of salt and expulsion of moisture in Synagris japonicus, Sciaenids sp. and Lactarius lactarius during prolonged salting. The fish used in this study were procured fresh and handled immediately. They were gutted, gilled, cleaned well and salted. Results indicated that larger salt proportions and higher temperature of salting both accelerate the rates of absorption of salt and shedding of moisture by fish muscle during salt curing.

A new observation on large scale disintegration of eggs of Indian major carps during development

While carp themselves may destroy carp eggs by sucking from outside the happa, destruction in the absence of carp also occurs. During observations of the effect of electrical field on developing carp eggs it was seen that the egg membrane ruptured prematurely under certain potential differences. In natural waters and mud potential differences occur in the presence of high concentrations of certain salts compared with the internal concentration. Temperature and pH fluctuations following strong sun or heavy rain accelerates the diffusion of ions along side water through the egg membrane. The egg cells expand rapidly and the embryos were rapidly dropped.

Influence of fat content on the quality and shelf life of cured sardines

The paper presents results of studies on the effect of seasonal variations in the fat content on the quality and shelf life of dry cured, pickle cured and smoke cured oil sardines. The merits and defects of each method of curing during different seasons are discussed.