Evaluation of the 2010 child restraint legislation in Queensland

Occupant injury comprises the largest proportion of child road crash trauma in most highly motorised countries. In Australia, road crashes are the primary cause of death for children aged 1-14 years and are among the top three causes of serious injury to this age group. For this reason considerable research attention has been focused on understanding the contributing factors and the most effective ways of improving children’s safety as car passengers. Australia has been particularly active in this area, with well regarded work being conducted on levels of use of dedicated child restraints, restraint crash performance in laboratory conditions, examination of real world restraint crash performance (case review), and studies of psychosocial factors influencing perceptions about restraints and their use (Brown & Bilston, 2006; Brown, McCaskill, Henderson & Bilston, 2006; Edwards, Anderson & Hutchinson, 2006; Lennon, 2005, 2007). New legislation for the restraint of children as vehicle passengers was enacted in Queensland in March 2010. This new legislation recognises the importance of dedicated restraint use for children up to at least age 7 years and the protective benefits of rear seating position in the event of a crash. As part of improving children’s safety and addressing key priority areas, the Queensland Injury Prevention Council (QIPC) and Department of Transport and Main Roads (TMR) commissioned the Centre for Accident Research and Road Safety, Queensland (CARRS-Q) to evaluate the impact of the new legislation. Although at the time of commencing the research the legislation had only been in force for 14 months, it was deemed critical to review its effectiveness in guiding parental choices and compliance in order to inform the design and focus of further supporting initiatives and interventions. Specifically, the research sought clear evidence of exactly what impact, if any, the legislation has had on compliance levels and what difficulties (if any) parents/carers experience in relation to interpreting as well as complying with the requirements of the new law. Knowledge about these barriers or difficulties will allow any future changes or improvements to the legislation to address such barriers and thus improve its effectiveness. Moreover, better information about how the legislation has affected parents will provide a basis to plan non-legislative comprehensive multi-strategy interventions such as community, educational or behavioural interventions with parents/carers and other stakeholder groups. In addition, it will allow identification of the most effective aspects of the legislation and those areas in need of extra attention to improve effectiveness/compliance and thus better protect children travelling in cars and improve their health and safety. This report presents the findings from the four components of the research: the literature review; observational study; intercept interviews and focus group with parents; and the interviews with key stakeholders.

Screening to identify large truck potential blackspots : methodological issues and concerns

1. Overview of hotspot identification (HSID)methods 2. Challenges with HSID 3. Bringing crash severity into the ‘mix’ 4. Case Study: Truck Involved Crashes in Arizona 5. Conclusions • Heavy duty trucks have different performance envelopes than passenger cars and have more difficulty weaving, accelerating, and braking • Passenger vehicles have extremely limited sight distance around trucks • Lane and shoulder widths affect truck crash risk more than passenger cars • Using PDOEs to model truck crashes results in a different set of locations to examine for possible engineering and behavioral problems • PDOE models point to higher societal cost locations, whereas frequency models point to higher crash frequency locations • PDOE models are less sensitive to unreported crashes • PDOE models are a great complement to existing practice

Futures languages in Taiwan

Taiwan is a rapidly changing society, facing many challenges. In this state of flux, it is important to step back and see the big picture. The NewFutures 2000 conference, which commemorated fifty years of the of Tamkang University, in TamShui (the northernmost tip), Taiwan (Republic of China) and was held on 5–7 November 2000, gave Taiwanese an opportunity to gain just such a perspective. The ostensible aim of the conference was to explore ‘transformations in education, culture and technology’. But numerous perspectives and academic approaches were explored; predictions, normative visions, probable futures, alternative futures, ethical futures, epistemological re-constructions, studies and deconstruction’s of images of the future, myth and worldview—all received attention, sometimes overwhelming the participants with contradictory and overbearing ideas. [introduction]

A comparison of the psychological, social, and legal factors contributing to speeding and drink driving behaviour

Within Australia, motor vehicle injury is the leading cause of hospital admissions and fatalities. Road crash data reveals that among the factors contributing to crashes in Queensland, speed and alcohol continue to be overrepresented. While alcohol is the number one contributing factor to fatal crashes, speeding also contributes to a high proportion of crashes. Research indicates that risky driving is an important contributor to road crashes. However, it has been debated whether all risky driving behaviours are similar enough to be explained by the same combination of factors. Further, road safety authorities have traditionally relied upon deterrence based countermeasures to reduce the incidence of illegal driving behaviours such as speeding and drink driving. However, more recent research has focussed on social factors to explain illegal driving behaviours. The purpose of this research was to examine and compare the psychological, legal, and social factors contributing to two illegal driving behaviours: exceeding the posted speed limit and driving when over the legal blood alcohol concentration (BAC) for the drivers licence type. Complementary theoretical perspectives were chosen to comprehensively examine these two behaviours including Akers’ social learning theory, Stafford and Warr’s expanded deterrence theory, and personality perspectives encompassing alcohol misuse, sensation seeking, and Type-A behaviour pattern. The program of research consisted of two phases: a preliminary pilot study, and the main quantitative phase. The preliminary pilot study was undertaken to inform the development of the quantitative study and to ensure the clarity of the theoretical constructs operationalised in this research. Semi-structured interviews were conducted with 11 Queensland drivers recruited from Queensland Transport Licensing Centres and Queensland University of Technology (QUT). These interviews demonstrated that the majority of participants had engaged in at least one of the behaviours, or knew of someone who had. It was also found among these drivers that the social environment in which both behaviours operated, including family and friends, and the social rewards and punishments associated with the behaviours, are important in their decision making. The main quantitative phase of the research involved a cross-sectional survey of 547 Queensland licensed drivers. The aim of this study was to determine the relationship between speeding and drink driving and whether there were any similarities or differences in the factors that contribute to a driver’s decision to engage in one or the other. A comparison of the participants self-reported speeding and self-reported drink driving behaviour demonstrated that there was a weak positive association between these two behaviours. Further, participants reported engaging in more frequent speeding at both low (i.e., up to 10 kilometres per hour) and high (i.e., 10 kilometres per hour or more) levels, than engaging in drink driving behaviour. It was noted that those who indicated they drove when they may be over the legal limit for their licence type, more frequently exceeded the posted speed limit by 10 kilometres per hour or more than those who complied with the regulatory limits for drink driving. A series of regression analyses were conducted to investigate the factors that predict self-reported speeding, self-reported drink driving, and the preparedness to engage in both behaviours. In relation to self-reported speeding (n = 465), it was found that among the sociodemographic and person-related factors, younger drivers and those who score high on measures of sensation seeking were more likely to report exceeding the posted speed limit. In addition, among the legal and psychosocial factors it was observed that direct exposure to punishment (i.e., being detected by police), direct punishment avoidance (i.e., engaging in an illegal driving behaviour and not being detected by police), personal definitions (i.e., personal orientation or attitudes toward the behaviour), both the normative and behavioural dimensions of differential association (i.e., refers to both the orientation or attitude of their friends and family, as well as the behaviour of these individuals), and anticipated punishments were significant predictors of self-reported speeding. It was interesting to note that associating with significant others who held unfavourable definitions towards speeding (the normative dimension of differential association) and anticipating punishments from others were both significant predictors of a reduction in self-reported speeding. In relation to self-reported drink driving (n = 462), a logistic regression analysis indicated that there were a number of significant predictors which increased the likelihood of whether participants had driven in the last six months when they thought they may have been over the legal alcohol limit. These included: experiences of direct punishment avoidance; having a family member convicted of drink driving; higher levels of Type-A behaviour pattern; greater alcohol misuse (as measured by the AUDIT); and the normative dimension of differential association (i.e., associating with others who held favourable attitudes to drink driving). A final logistic regression analysis examined the predictors of whether the participants reported engaging in both drink driving and speeding versus those who reported engaging in only speeding (the more common of the two behaviours) (n = 465). It was found that experiences of punishment avoidance for speeding decreased the likelihood of engaging in both speeding and drink driving; whereas in the case of drink driving, direct punishment avoidance increased the likelihood of engaging in both behaviours. It was also noted that holding favourable personal definitions toward speeding and drink driving, as well as higher levels of on Type-A behaviour pattern, and greater alcohol misuse significantly increased the likelihood of engaging in both speeding and drink driving. This research has demonstrated that the compliance with the regulatory limits was much higher for drink driving than it was for speeding. It is acknowledged that while speed limits are a fundamental component of speed management practices in Australia, the countermeasures applied to both speeding and drink driving do not appear to elicit the same level of compliance across the driving population. Further, the findings suggest that while the principles underpinning the current regime of deterrence based countermeasures are sound, current enforcement practices are insufficient to force compliance among the driving population, particularly in the case of speeding. Future research should further examine the degree of overlap between speeding and drink driving behaviour and whether punishment avoidance experiences for a specific illegal driving behaviour serve to undermine the deterrent effect of countermeasures aimed at reducing the incidence of another illegal driving behaviour. Furthermore, future work should seek to understand the factors which predict engaging in speeding and drink driving behaviours at the same time. Speeding has shown itself to be a pervasive and persistent behaviour, hence it would be useful to examine why road safety authorities have been successful in convincing the majority of drivers of the dangers of drink driving, but not those associated with speeding. In conclusion, the challenge for road safety practitioners will be to convince drivers that speeding and drink driving are equally risky behaviours, with the ultimate goal to reduce the prevalence of both behaviours.

Bribie Island groundwater resources : challenges in development of conceptual and numerical models

Groundwater is a major resource on Bribie Island and its sustainable management is essential to maintain the natural and modified eco-systems, as well as the human population and the integrity of the island as a sand mass. An effective numerical model is essential to enable predictions, and to test various water use and rainfall/climate scenarios. Such a numerical model must, however, be based on a representative conceptual hydrogeological model to allow incorporation of realistic controls and processes. Here we discuss the various hydrogeological models and parameters, and hydrological properties of the materials forming the island. We discuss the hydrological processes and how they can be incorporated into these models, in an integrated manner. Processes include recharge, discharge to wetlands and along the coastline, abstraction, evapotranspiration and potential seawater intrusion. The types and distributions of groundwater bores and monitoring are considered, as are scenarios for groundwater supply abstraction. Different types of numerical models and their applicability are also considered

Confirmatory factor analysis of the Behaviour of Young Novice Drivers Scale (BYNDS)

The greatly increased risk of being killed or injured in a car crash for the young novice driver has been recognised in the road safety and injury prevention literature for decades. Risky driving behaviour has consistently been found to contribute to traffic crashes. Researchers have devised a number of instruments to measure this risky driving behaviour. One tool developed specifically to measure the risky behaviour of young novice drivers is the Behaviour of Young Novice Drivers Scale (BYNDS) (Scott-Parker et al., 2010). The BYNDS consists of 44 items comprising five subscales for transient violations, fixed violations, misjudgement, risky driving exposure, and driving in response to their mood. The factor structure of the BYNDS has not been examined since its development in a matched sample of 476 novice drivers aged 17-25 years. Method: The current research attempted to refine the BYNDS and explore its relationship with the self-reported crash and offence involvement and driving intentions of 390 drivers aged 17-25 years (M = 18.23, SD = 1.58) in Queensland, Australia, during their first six months of independent driving with a Provisional (intermediate) driver’s licence. A confirmatory factor analysis was undertaken examining the fit of the originally proposed BYNDS measurement model. Results: The model was not a good fit to the data. A number of iterations removed items with low factor loadings, resulting in a 36-item revised BYNDS which was a good fit to the data. The revised BYNDS was highly internally consistent. Crashes were associated with fixed violations, risky driving exposure, and misjudgement; offences were moderately associated with risky driving exposure and transient violations; and road-rule compliance intentions were highly associated with transient violations. Conclusions: Applications of the BYNDS in other young novice driver populations will further explore the factor structure of both the original and revised BYNDS. The relationships between BYNDS subscales and self-reported risky behaviour and attitudes can also inform countermeasure development, such as targeting young novice driver non-compliance through enforcement and education initiatives.

Useful field of view predicts driving in the presence of distracters

Purpose. The Useful Field of View (UFOV(R)) test has been shown to be highly effective in predicting crash risk among older adults. An important question which we examined in this study is whether this association is due to the ability of the UFOV to predict difficulties in attention-demanding driving situations that involve either visual or auditory distracters. Methods. Participants included 92 community-living adults (mean age 73.6 +/- 5.4 years; range 65-88 years) who completed all three subtests of the UFOV involving assessment of visual processing speed (subtest 1), divided attention (subtest 2), and selective attention (subtest 3); driving safety risk was also classified using the UFOV scoring system. Driving performance was assessed separately on a closed-road circuit while driving under three conditions: no distracters, visual distracters, and auditory distracters. Driving outcome measures included road sign recognition, hazard detection, gap perception, time to complete the course, and performance on the distracter tasks. Results. Those rated as safe on the UFOV (safety rating categories 1 and 2), as well as those responding faster than the recommended cut-off on the selective attention subtest (350 msec), performed significantly better in terms of overall driving performance and also experienced less interference from distracters. Of the three UFOV subtests, the selective attention subtest best predicted overall driving performance in the presence of distracters. Conclusions. Older adults who were rated as higher risk on the UFOV, particularly on the selective attention subtest, demonstrated poorest driving performance in the presence of distracters. This finding suggests that the selective attention subtest of the UFOV may be differentially more effective in predicting driving difficulties in situations of divided attention which are commonly associated with crashes.

A Bayesian‐Markov process for reliability prediction

Accurate reliability prediction for large-scale, long lived engineering is a crucial foundation for effective asset risk management and optimal maintenance decision making. However, a lack of failure data for assets that fail infrequently, and changing operational conditions over long periods of time, make accurate reliability prediction for such assets very challenging. To address this issue, we present a Bayesian-Marko best approach to reliability prediction using prior knowledge and condition monitoring data. In this approach, the Bayesian theory is used to incorporate prior information about failure probabilities and current information about asset health to make statistical inferences, while Markov chains are used to update and predict the health of assets based on condition monitoring data. The prior information can be supplied by domain experts, extracted from previous comparable cases or derived from basic engineering principles. Our approach differs from existing hybrid Bayesian models which are normally used to update the parameter estimation of a given distribution such as the Weibull-Bayesian distribution or the transition probabilities of a Markov chain. Instead, our new approach can be used to update predictions of failure probabilities when failure data are sparse or nonexistent, as is often the case for large-scale long-lived engineering assets.

Numerical modelling and design of LiteSteel Beams subject to lateral buckling

The LiteSteel Beam (LSB) is a new hollow flange channel section developed using a patented dual electric resistance welding and cold-forming process. It has a unique geometry consisting of torsionally rigid rectangular hollow flanges and a slender web, and is commonly used as flexural members. However, the LSB flexural members are subjected to a relatively new lateral distortional buckling mode, which reduces their moment capacities. Unlike lateral torsional buckling, the lateral distortional buckling of LSBs is characterised by simultaneous lateral deflection, twist and cross sectional change due to web distortion. Therefore a detailed investigation into the lateral buckling behaviour of LSB flexural members was undertaken using experiments and finite element analyses. This paper presents the details of suitable finite element models developed to simulate the behaviour and capacity of LSB flexural members subject to lateral buckling. The models included all significant effects that influence the ultimate moment capacities of such members, including material inelasticity, lateral distortional buckling deformations, web distortion, residual stresses, and geometric imperfections. Comparison of elastic buckling and ultimate moment capacity results with predictions from other numerical analyses and available buckling moment equations, and experimental results showed that the developed finite element models accurately predict the behaviour and moment capacities of LSBs. The validated model was then used in a detailed parametric study that produced accurate moment capacity data for all the LSB sections and improved design rules for LSB flexural members subject to lateral distortional buckling.

Member moment capacities of mono-symmetric LiteSteel beam floor joists with web openings

Recently developed cold-formed LiteSteel beam (LSB) sections have found increasing popularity in residential, industrial and commercial buildings due to their light weight and cost-effectiveness. Another beneficial characteristic is that they allow torsionally rigid rectangular flanges to be combined with economical fabrication processes. Currently, there is significant interest in the use of LSB sections as flexural members in floor joist systems. When used as floor joists, these sections require openings in the web to provide access for inspection and other services. At present, however, there is no design method available that provides accurate predictions of the moment capacities of LSBs with web openings. This paper presents the results of an investigation of the buckling and ultimate strength behaviour of LSB flexural members with web openings. A detailed fine element analysis (FEA)-based parametric study was conducted with the aim of developing appropriate design rules and making recommendations for the safe design of LSB floor joists. The results include the required moment capacity curves for LSB sections with a range of web opening combinations and spans and the development of appropriate design rules for the prediction of the ultimate moment capacities of LSBs with web openings.

Behaviour and design of cold-formed steel beams subject to lateral-torsional buckling

Cold-formed steel beams are increasingly used as floor joists and bearers in buildings. Their behaviour and moment capacities are influenced by lateral-torsional buckling when they are not laterally restrained adequately. Past research on lateral-torsional buckling has concentrated on hot-rolled steel beams. Hence a numerical study was undertaken to investigate the lateral-torsional buckling behaviour of simply supported cold-formed steel lipped channel beams subjected to uniform bending. For this purpose a finite element model was developed using ABAQUS and its accuracy was verified using available numerical and experimental results. It was then used in a detailed parametric study to simulate the lateral-torsional buckling behaviour and capacity of cold-formed steel beams under varying conditions. The moment capacity results were compared with the predictions from the current design rules in many cold-formed steel codes and suitable recommendations were made. European design rules were found to be conservative while Australian/New Zealand and North American design rules were unconservative. Hence the moment capacity design equations in these codes were modified in this paper based on the available finite element analysis results. This paper presents the details of the parametric study, recommendations to current design rules and the new design rules proposed in this research for lateral-torsional buckling of cold-formed steel lipped channel beams.

Numerical study of cold-formed steel beam subject to lateral-torsional buckling

The use of cold-formed steel members as structural columns and beams in residential, industrial and commercial buildings has increased significantly in recent times. This study is focused on the use of cold-formed steel sections as flexural members subject to lateral-torsional buckling. For this purpose a finite element model of a simply supported lipped channel beam under uniform bending was developed, validated using available numerical and experimental results, and used in a detailed parametric study. The moment capacity results were then compared with the predictions from the current ambient temperature design rules in the cold-formed steel structures codes of Australia, New Zealand, North America and Europe. European design rules were found to be conservative while Australian and American design rules were unsafe. This paper presents the results of the numerical study, the comparison with the current design rules and the new proposed design rules.

Vulnerable road user groups : a review of younger drivers, motorcyclists and older drivers

Scientific efforts to understand and reduce the occurrence of road crashes continue to expand, particularly in the areas of vulnerable road user groups. Three groups that are receiving increasing attention within the literature are younger drivers, motorcyclists and older drivers. These three groups are at an elevated risk of being in a crash or seriously injured, and research continues to focus on the origins of this risk as well as the development of appropriate countermeasures to improve driving outcomes for these cohorts. However, it currently remains unclear what factors produce the largest contribution to crash risk or what countermeasures are likely to produce the greatest long term positive effects on road safety. This paper reviews research that has focused on the personal and environmental factors that increase crash risk for these groups as well as considers direction for future research in the respective areas. A major theme to emerge from this review is that while there is a plethora of individual and situational factors that influence the likelihood of crashes, these factors often combine in an additive manner to exacerbate the risk of both injury and fatality. Additionally, there are a number of risk factors that are pertinent for all three road user groups, particularly age and the level of driving experience. As a result, targeted interventions that address these factors are likely to maximise the flow-on benefits to a wider range of road users. Finally, there is a need for further research that aims to bridge the research-to-practice gap, in order to develop appropriate pathways to ensure that evidenced-based research is directly transferred to effective policies that improve safety outcomes.

Modelling the interaction of keratinocytes and fibroblasts during normal and abnormal wound healing processes

The crosstalk between fibroblasts and keratinocytes is a vital component of the wound healing process, and involves the activity of a number of growth factors and cytokines. In this work, we develop a mathematical model of this crosstalk in order to elucidate the effects of these interactions on the regeneration of collagen in a wound that heals by second intention. We consider the role of four components that strongly affect this process: transforming growth factor-beta, platelet-derived growth factor, interleukin-1 and keratinocyte growth factor. The impact of this network of interactions on the degradation of an initial fibrin clot, as well as its subsequent replacement by a matrix that is mainly comprised of collagen, is described through an eight-component system of nonlinear partial differential equations. Numerical results, obtained in a two-dimensional domain, highlight key aspects of this multifarious process such as reepithelialisation. The model is shown to reproduce many of the important features of normal wound healing. In addition, we use the model to simulate the treatment of two pathological cases: chronic hypoxia, which can lead to chronic wounds; and prolonged inflammation, which has been shown to lead to hypertrophic scarring. We find that our model predictions are qualitatively in agreement with previously reported observations, and provide an alternative pathway for gaining insight into this complex biological process.

Modified beam theories for bending properties of nanowires considering surface/intrinsic effects and axial extension effect

Several studies of the surface effect on bending properties of a nanowire (NW) have been conducted. However, these analyses are mainly based on theoretical predictions, and there is seldom integration study in combination between theoretical predictions and simulation results. Thus, based on the molecular dynamics (MD) simulation and different modified beam theories, a comprehensive theoretical and numerical study for bending properties of nanowires considering surface/intrinsic stress effects and axial extension effect is conducted in this work. The discussion begins from the Euler-Bernoulli beam theory and Timoshenko beam theory augmented with surface effect. It is found that when the NW possesses a relatively small cross-sectional size, these two theories cannot accurately interpret the true surface effect. The incorporation of axial extension effect into Euler-Bernoulli beam theory provides a nonlinear solution that agrees with the nonlinear-elastic experimental and MD results. However, it is still found inaccurate when the NW cross-sectional size is relatively small. Such inaccuracy is also observed for the Euler-Bernoulli beam theory augmented with both contributions from surface effect and axial extension effect. A comprehensive model for completely considering influences from surface stress, intrinsic stress, and axial extension is then proposed, which leads to good agreement with MD simulation results. It is thus concluded that, for NWs with a relatively small cross-sectional size, a simple consideration of surface stress effect is inappropriate, and a comprehensive consideration of the intrinsic stress effect is required.