Pre-treatment of thermoduric spores in CO2 modified atmosphere and their survivability during food extrusion

The aim of this experiment was to evaluate how susceptible spores become to mechanical damage during food extrusion after being submitted to CO2. B. stearothermophilus spores sowed to corn and soy mix were submitted to 99% CO2 for 10 days and extruded in a single-screw extruder. The treatments were: T1 - spore-containing samples, extruded at screw rotational speed of 65 rpm and barrel wall temperature of 80 °C; T2 - as T1, except for screw rotational speed of 150 rpm; and T3 - as T2, except that samples were submitted to the modified atmosphere. The results for cell viability, minimum and maximum residence times, and static pressure were T1 - 19.90 ± 3.24%, 123.3 ± 14.50 seconds; 203.3 ± 14.05 seconds; 2.217 ± 62 kPa; T2 - 21.42 ± 8.24%, 70.00 ± 5.77 seconds; 170.00 ± 4.67 seconds; 2.310 ± 107 kPa; and T3 - 11.06 ± 2.46%, 86.00 ± 7.23 seconds; 186.00 ± 7.50 seconds; 2.403 ± 93 kPa, respectively. It was concluded that the extrusion process did reduce the cell count. However, screw rotational speed variation or CO2 pre-treatment did not affect cell viability.

Corn germ with pericarp in relation to whole corn: nutrient contents, food and protein efficiency, and protein digestibility-corrected amino acid score

The germ fraction with pericarp (bran) is generated in the industrial processing of corn kernel, and it is used for oil extraction and animal feed. This study evaluated the nutritional and protein quality of this fraction in relation to whole corn. The proximate composition, mineral contents, and amino acid profile of the germ fraction with pericarp and of whole corn were determined. A 4-week experiment was conducted using 36 weanling male Wistar rats, and three 10%-protein diets (reference, germ with 15% lipids and casein with 15% lipids), two 6%-protein diets (whole corn and casein), and a protein-free diet were prepared. The germ showed higher contents of proteins, lipids, dietary fiber (27.8 g.100 g-1), ash, minerals (Fe and Zn- approximately 5 mg.100 g-1), and lysine (57.2 mg.g-1 protein) than those of corn. The germ presented good quality protein (Relative Protein Efficiency Ratio-RPER = 80%; Protein Digestibility-Corrected Amino Acid Score-PDCAAS = 86%), higher than that of corn (RPER = 49%; PDCAAS = 60%). The corn germ fraction with pericarp is rich in dietary fiber, and it is a source of good quality protein as well as of iron and zinc, and its use as nutritive raw material is indicated in food products for human consumption.

Influence of different sanitizers on food contaminant bacteria: effect of exposure temperature, contact time, and product concentration

The efficiency of four Sanitizers - peracetic acid, chlorhexidine, quaternary ammonium, and organic acids - was tested in this work using different bacteria recognized as a problem to meat industry, Salmonella sp., S. aureus, E. coli and L. monocytogenes. The effects of sanitizer concentration (0.2, 0.5, 0.6, 1.0, 1.1 and 1.4%), at different temperatures (10 and 45 °C) and contact time (2, 10, 15, 18 and 25 minutes) were evaluated. Tests in an industrial plant were also carried out considering previously obtained results. In a general way, peracetic acid presented higher efficiencies using low concentration (0.2%) and contact time (2 minutes) at 10 °C. The tests performed in industrial scale showed that peracetic acid presented a good performance in concentration and contact time lower than that suggested by the suppliers. The use of chlorhexidine and quaternary ammonium led to reasonable results at the indicated conditions, and organic acids were ineffective under concentration and contact time higher than those indicated by the suppliers in relation to Staphylococcus aureus. The results, in general, show that the choice for the most adequate sanitizer depends on the microorganism contaminant, the time available for sanitizer application, and also on the process cost.

Citotoxicity of food dyes sunset yellow (E-110), bordeaux red (E-123), and tatrazine yellow (E-102) on Allium cepa L. root meristematic cells

The objective of this study was to evaluate the cytotoxic effect of the food dyes sunset yellow, bordeaux red, and tartrazine yellow on the cellular cycle of Allium cepa L. Each dye was evaluated at the doses of 0.4 and 4.0 mL, at the exposure times of 24 and 48 hours in root tip cells of Allium cepa L. Slides were prepared and cells were analyzed during the whole cell cycle for cellular aberrations totaling 5,000 total cells for each dose evaluated. The mitotic index was calculated, and statistical analysis was performed using the Chi-squared test (p < 0.05). The results showed that the three dyes used under the evaluated doses and exposure times were cytotoxic to the cells of the system-test used. Further cytotoxicity studies should be conducted for additional results and a proper evaluation of the effect of these three dyes on a cellular level.

Comparative analysis of vitamin A and iron content in food according to different food composition tables and nutritional evaluation software programs

The objective of this study was to analyze retinol equivalent and iron content in different food composition tables and nutritional evaluation software programs. A literature search was conduct to identify tables and software available in Brazil containing information about retinol equivalent and iron content that are currently used by nutritionists. Ten tables and five software programs were selected for this study. The methodology used to present the retinol equivalent and iron content was evaluated and no pattern to obtain such content was found in the tables and software programs analyzed. Only one of the tables had enough information for the calculation of retinol equivalents; this table is recommended to all Latin America As for the iron content, three of the tables analyzed stand out and therefore should be used; two of them are based on national foods and the other is recommended for use in all Latin America countries. None of the software programs evaluated use the conversion factors suggested by IVACG to assess the vitamin A content in foods. Special attention should be given to the content of iron provided in the software programs since they use tables as international sources and fortified foods.

Acceptance of nanotechnology applications and satisfaction with food-related life in southern Chile

Given the increasing use of nanotechnology in food production and packaging, its acceptance was evaluated in Temuco, Chile, and different consumer segments were identified. Different brands of sunflower oil were used at different prices as a case study. A structured questionnaire was applied to 400 supermarket shoppers. It was determined that brand was more important than nanotechnology application in packaging and food, and more important than price. The consumers preferred an average priced oil with a manufacturer's brand with nanoparticles to reduce cholesterol, and packaging with nanoparticles to increase the shelf life of the product and to prevent the growth of microorganisms. Three consumer segments were distinguished by the cluster analysis. The largest segment (44%) preferred the oil without nanotechnology. The second (35.2%) preferred the oil with nanotechnology in the food and the packaging, and the greatest preference was for packaging with nanoparticles extension in the shelf life of the product. The third segment (20.8%) had similar behavior, but it showed greater preference for the oil with nanoparticles that reduced cholesterol and for the packaging that prevented the growth of bacteria and viruses. The segments differed in terms of their satisfaction with food-related life and lifestyle. It was found that over 50% of the participants preferred oil with nanotechnology applications.

Main food sources of carotenoids, according to the purpose and degree of processing, for beneficiaries of the 'Bolsa Família' in Brazil

The intake of carotenoids is associated with antioxidant properties and some of these substances have activity of pro-vitamin A. This study aimed to estimate the intake of carotenoids (average values) by the Brazilian population focusing on beneficiaries of the 'Bolsa Família' Program and identify the dietary sources, according to the purpose and degree of processing and the inclusion of food additives. The database used is the personal food consumption module of the Household Budget Survey of 2008-2009, conducted by the Brazilian Institute of Geography and Statistics. The content of carotenoids in foods was obtained primarily from a National data source. Food products were classified into three categories: 1) fresh and minimally processed foods; 2) processed foods (containing food additives, except for flavoring and coloring agents); and 3) highly processed foods (containing flavoring and coloring agents). Insufficient intakes were identified for the conditional cash transfer program beneficiaries (3,547.1 µg). Fresh and minimally processed foods supplied between 48.6% (for girls) and 65.7% (for male adults) of pro-vitamin carotenoids. Processed foods were sources of between 55.5% and 57.0% of lutein + zeaxanthin for elderly and between 58.0% and 67.8% of lycopene for adults. Highly processed foods contributed to less than 5.0% of total carotenoids.

Physicochemical, microbiological and sensory evaluation of a bioactive food blend

The potential of functional foods to decrease the risks of chronic non-communicable diseases has motivated the development of products with beneficial effects on fat and carbohydrate metabolism. The present study aimed at analyzing the physicochemical, microbiological, and sensory properties of a bioactive food blend developed to help the nutritional therapy provided to hypolipidemic and hyperglycemic patients with HIV/AIDS treated with antiretroviral therapy. The food blend was evaluated for moisture, protein, carbohydrate, fats, fixed mineral residue, total fiber content, and fatty acid composition, according to the standards established by the Instituto Adolfo Lutz. Food safety was assessed by microbiological analyses for Bacillus cereus, Salmonella spp, and coliforms. Sensory acceptance and intention to purchase were also evaluated. The food blend showed good nutritional potential, with low atherogenicity and thrombogenicity indexes, good macronutrient balance, and high energy value. The adoption of Good Manufacturing Practices (GMP) resulted in a product suitable for consumption. With respect to sensory aspects, the food blend showed satisfactory indexes of acceptability and promising marketing potential.

Cytotoxic and genotoxic potential of liquid synthetic food flavorings evaluated alone and in combination

This study aimed to evaluate the cytotoxic and genotoxic potential of food flavorings (Strawberry, Condensed Milk and Chocolate) on Allium cepa meristematic root cells, with exposure times of 24 and 48 hours. Cytotoxic and mutagenic potential were evaluated separately at doses of 0.2, 0.4 and 0.6 ml and in combination, in which for each dose, the same dose of one other flavoring was combined. The results were analyzed by the Chi-square test (p <0.05). The Strawberry flavor in both exposure times and the three studied doses, the Condensed Milk at 0.6 ml in the 48 hour exposure time, the Chocolate flavor at 0.4 ml, exposure time of 48 hours, and at 0.6 ml, in both exposure times and all treatments with combined doses, significantly reduced the cell division rate, proving to be cytotoxic. No treatment resulted in a significant number of cellular aberrations in A. cepa cells, therefore, the flavorings, under the conditions studied, were non- mutagenic.

Acceptance of a food of animal origin obtained through genetic modification and cloning in South America: a comparative study among university students and working adults

AbstractWith the aim of comparing the acceptance of milk obtained from cloned, genetically modified (GM) and conventionally bred cows among working adults and university students, and identifying and characterizing typologies among both subsamples in terms of their preferences, a survey was applied to 400 people in southern Chile, distributed using a simple allocation among the subsamples. Using a conjoint analysis, it was found that consumers preferred milk from a conventional cow. Using a cluster analysis, in both subsamples two segments sensitive to production technology were identified. Rejection of cloning was greatest among university students, whereas a higher proportion of working adults rejected GM. The segments differed in terms of area of residence, knowledge about GM, and milk consumption habits. Contrary to what was expected, no differences were found according to education, gender or degree of satisfaction with food-related life.

Developing novel one-step processes for obtaining food-grade O/W emulsions from pressurized fluid extracts: processes description, state of the art and perspectives

Abstract In this work, a novel on-line process for production of food-grade emulsions containing oily extracts, i.e. oil-in-water (O/W) emulsions, in only one step is presented. This process has been called ESFE, Emulsions from Supercritical Fluid Extraction. With this process, emulsions containing supercritical fluid extracts can be obtained directly from plant materials. The aim in the conception of this process is to propose a new rapid way to obtain emulsions from supercritical fluid extracts. Nowadays the conventional emulsion formulation method is a two-step procedure, i.e. first supercritical fluid extraction for obtaining an extract; secondly emulsion formulation using another device. Other variation of the process was tested and successfully validated originating a new acronymed process: EPFE (Emulsions from Pressurized Fluid Extractions). Both processes exploit the supercritical CO2-essential oils miscibility, in addition, EPFE process exploits the emulsification properties of saponin-rich pressurized aqueous plant extracts. The feasibility of this latter process was demonstrated using Pfaffia glomerata roots as source of saponin-rich extract, water as extracting solvent and clove essential oil, directly extracted using supercritical CO2, as a model dispersed phase. In addition, examples of pressurized fluid-based coupled processes applied for adding value to food bioactive compounds developed in the past five years are reviewed.

Effect of adding flours from marolo fruit (Annona crassiflora Mart) and jerivá fruit (Syagrus romanzoffiana Cham Glassm) on the physicals and sensory characteristics of food bars

Abstract The marolo (Annona crassiflora Mart.) and jerivá (Syagrus romanzoffiana Cham Glassm) fruits grow in the Cerrado biome, and have important sensory and nutritional characteristics. These fruits are eaten fresh or processed and embedded in ice cream, candy, juices, and liquors. However, their use is very limited and is localized exclusively to their native region. The aim of this study was to evaluate the use of these fruits in food consumer products to improve the nutritional patterns of consumers and extend knowledge thereof. To do this, different levels (0%, 5%, 10%, 15%, and 20%) of flour derived from the marolo and jerivá fruits were incorporated into food bars, which were then characterized in terms of their physical of the texture (TPA), porosity, color and sensorial properties. The food bars enriched with marolo and jerivá flours had an intense yellow color and increased hardness relative to the control bars; the porosity of the bars progressively decreased as the amount of flour added increased. The sensorial analysis in the snack bars developed added with the fruits flour no was influence by incorporation this component, showed good averages for the scores evaluated.

Survey of trace element and dietetic fiber composition of “Leblebi” which is a local snack food consumed in Turkey

Abstract In Turkey and several Middle East countries' people consume “leblebi” which is a traditional snack food made from chickpeas (Cicer arietinum L.). Chickpea products are highly nutritive and a cheap food for human consumption and have become an essential part of daily diets in the world. The present study aims to determine the chemical, nutritional and dietary composition of fifty leblebi samples marketed in Turkey. Protein values of the leblebi ranged from 19.4 to 23.9% dehulled and 20.3 to 20.8% for nondehulled leblebi while a value of 19.1% was recorded for chickpeas. Mineral results showed that Potassium (K) was the most abundant element in leblebi ranging from 6514 to 14431 mg/kg. The amount of dietary components neutral detergent fibre (NDF), acid detergent fibre (ADF), acid detergent lignin (ADL) and cellulose did not vary much between the samples analyzed.

Acquisition and transfer of experiential learning from rock climbing to the corporate workplace

There were three purposes to this study. The first purpose was to determine how learning can be influenced by various factors i~ the rock climbing experience. The second purpose was to examine what people can learn from the rock climbing experience. The third purpose was to investigate whether that learning can transfer from the rock climbing experience to the subjects' real life in the workplace. Ninety employees from a financial corporation in the Niagara Region volunteered for this study. All subjects were surveyed throughout a one-day treatment. Ten were purposefully selected one month later for interviews. Ten themes emerged from the subjects in terms of what was learned. Inspiration, motivation, and determination, preparation, goals and limitations, perceptions and expectations, confidence and risk taking, trust and support, teamwork, feedback and encouragement, learning from failure, and finally, skills and flow. All participants were able to transfer what was learned back to the workplace. The results of this study suggested that subjects' learning was influenced by their ability to: take risks in a safe environment, fail without penalty, support each other, plan without time constraints, and enjoy the company of fellow workers that they wouldn't normally associate with. Future directions for research should include different types of treatments such as white water rafting, sky diving, tall ship sailing, or caving.

The effect of feeding regime on larval black fly (Diptera: simuliidae) primary head fan ray number

Identification of larval simuliids has always been difficult due to the morphological similarity many species bear to one another. For this reason all characters available have been drawn upon to aid in species identification, including head fan ray number. Even in light of an increasing body of anecdotal reports that head fan ray number is not fixed, it has continued to be used to aid species identification. In the current experiment simuliid larvae were reared under controlled laboratory conditions to last instar in one of three feeding regimes. Out of nine trials, the results of six showed a significant inverse relationship between feeding regime and head fan ray number. In addition to the laboratory experiments, larvae were also collected from the field over the course of the spring and summer, 1994. From these samples significant interspecific and intraspecific variations in head fan ray number were found both spatially and temporally within Algonquin Park. From these data it is concluded that head fan ray number for the species analysed is a developmentally plastic character, which varies in response to food availability. Furthermore, given the extreme variations in head fan ray number found in some species, I recommend that head fan ray number not be used as an aid to identification unless it can be shown to be a fixed character for the species in question.