Surgical treatment of perforated peptic ulcer. Is there a need for a change?

The aim of this study is to evaluate the risk and the results of surgical treatment for perforated peptic ulcer (PPU), to compare them through time, and to determine the current optimal surgical treatment. In a retrospective study, the charts of all the patients admitted for PPU between January 1976 and October 1991 were reviewed. The features believed to be of importance in the outcome were assessed for statistical analysis. A comparison was made between three periods of the study (1976-1980, 1981-1985, 1986-1991). 247 patients were included. Mortality was 11.7% (29/247). Factors associated with an increased mortality were: shock on admission (p = 0.01), age (p < 0.001), severe associated medical illnesses (p < 0.001) and the form of treatment (p < 0.01). After multivariate analysis, only shock on admission and associated disease remained significant. Chronic peptic ulcer disease occurred in 76% of the patients. Comparing the periods showed that age, associated illnesses, percentage of acute or subacute ulcers, mortality, as well as the number of patients, are increasing. The main determinant of surgical treatment for PPU is the patient and his/her general state. Because of the high frequency of chronic peptic ulcer disease, we believe that the gold standard in the treatment for PPU remains definitive surgery. However, in the presence of more than one risk factor, suture and patch are probably safer.

A comparison of the imaging characteristics of the new Kodak Hyper Speed G film with the current T-MAT G/RA film and the CR 9000 system.

Three standard radiation qualities (RQA 3, RQA 5 and RQA 9) and two screens, Kodak Lanex Regular and Insight Skeletal, were used to compare the imaging performance and dose requirements of the new Kodak Hyper Speed G and the current Kodak T-MAT G/RA medical x-ray films. The noise equivalent quanta (NEQ) and detective quantum efficiencies (DQE) of the four screen-film combinations were measured at three gross optical densities and compared with the characteristics for the Kodak CR 9000 system with GP (general purpose) and HR (high resolution) phosphor plates. The new Hyper Speed G film has double the intrinsic sensitivity of the T-MAT G/RA film and a higher contrast in the high optical density range for comparable exposure latitude. By providing both high sensitivity and high spatial resolution, the new film significantly improves the compromise between dose and image quality. As expected, the new film has a higher noise level and a lower signal-to-noise ratio than the standard film, although in the high frequency range this is compensated for by a better resolution, giving better DQE results--especially at high optical density. Both screen-film systems outperform the phosphor plates in terms of MTF and DQE for standard imaging conditions (Regular screen at RQA 5 and RQA 9 beam qualities). At low energy (RQA 3), the CR system has a comparable low-frequency DQE to screen-film systems when used with a fine screen at low and middle optical densities, and a superior low-frequency DQE at high optical density.

Analysis of Industrial Granular Flow Applications by Using Advanced Collision Models

Granular flow phenomena are frequently encountered in the design of process and industrial plants in the traditional fields of the chemical, nuclear and oil industries as well as in other activities such as food and materials handling. Multi-phase flow is one important branch of the granular flow. Granular materials have unusual kinds of behavior compared to normal materials, either solids or fluids. Although some of the characteristics are still not well-known yet, one thing is confirmed: the particle-particle interaction plays a key role in the dynamics of granular materials, especially for dense granular materials. At the beginning of this thesis, detailed illustration of developing two models for describing the interaction based on the results of finite-element simulation, dimension analysis and numerical simulation is presented. The first model is used to describing the normal collision of viscoelastic particles. Based on some existent models, more parameters are added to this model, which make the model predict the experimental results more accurately. The second model is used for oblique collision, which include the effects from tangential velocity, angular velocity and surface friction based on Coulomb's law. The theoretical predictions of this model are in agreement with those by finite-element simulation. I n the latter chapters of this thesis, the models are used to predict industrial granular flow and the agreement between the simulations and experiments also shows the validation of the new model. The first case presents the simulation of granular flow passing over a circular obstacle. The simulations successfully predict the existence of a parabolic steady layer and show how the characteristics of the particles, such as coefficients of restitution and surface friction affect the separation results. The second case is a spinning container filled with granular material. Employing the previous models, the simulation could also reproduce experimentally observed phenomena, such as a depression in the center of a high frequency rotation. The third application is about gas-solid mixed flow in a vertically vibrated device. Gas phase motion is added to coherence with the particle motion. The governing equations of the gas phase are solved by using the Large eddy simulation (LES) and particle motion is predicted by using the Lagrangian method. The simulation predicted some pattern formation reported by experiment.

Growth and demise of Permian biogenic chert along northwest Pangea: evidence for end-Permian collapse of thermohaline circulation

The Permian Chert Event (PCE) was a 30 Ma long episode of unusual chert accumulation along the northwest margin of Pangea, and possibly worldwide. The onset of the PCE occurred at about the Sakmarian-Artinskian boundary in the Sverdrup Basin, Canadian Arctic, where it coincides with a maximum flooding event, the ending of high-frequency/high-amplitude shelf cyclicity, the onset of massive biogenic chert deposition in deep-water distal areas, and a long-term shift from warm- to cool-water carbonate sedimentation in shallow-water proximal areas. A similar and coeval shift is observed from the Barents Sea to the northwestern USA. A landward and southward expansion of silica factories occurred during the Middle and Late Permian at which time warm-water carbonate producers disappeared completely from the northwest margin of Pangea. Biotically impoverished and increasingly narrow cold-water carbonate factories (characterised by non-cemented bioclasts of sponges, bryozoans, echinoderms and brachiopods) were then progressively replaced by silica factories. By Late Permian time, little carbonate sediments accumulated in the Barents Sea and in the Sverdrup Basin. where the deep- to shallow-water sedimentary spectrum was occupied by siliceous sponge spicules. By that time, biogenic silica sedimentation was common throughout the world. Silica factories collapsed in the Late Permian, abruptly bringing the PCE to an end. In northwest Pangea, the end- Permian collapse of the PCE was associated with a major transgression and with a return to much warmer oceanic and continental climatic conditions. Chert deposition resumed in the distal oceanic areas during the early Middle Triassic (Anisian) after a 8-10 Ma interruption (Early Triassic Chert Gap). The conditions necessary for the onset, expansion and zenith of the PCE were provided by the thermohaline circulation of nutrient-rich cold waters along the northwestern and western margin of Pangea, and possibly throughout the world oceans. These conditions provided an efficient transportation mechanism that constantly replenished the supply of silica in the area, created a nutrient- and oxygen-rich environment favouring siliceous biogenic productivity. established cold sea-floor conditions, hindering silica dissolution, while increasing calcium carbonate solubility, and provided conditions adverse to organic and inorganic carbonate production, The northwest margin of Pangea was, for nearly 30 Ma. bathed by cold waters presumably derived from the seasonal melting of northern sea ice, the assumed engine for thermohaline circulation. This process started near the Sakmarian-Artinskian boundary. intensified throughout Middle and Late Permian time and ceased suddenly in latest Permian time, It led to oceanic conditions much colder than normally expected from the palaeolatitudes. and the influence of cold northerly-derived water was felt as far south southern Nevada. The demise of silica factories was caused by the rapid breakdown of these conditions and the establishment of a much warmer marine environment accompanied by sluggish circulation and perhaps a reduced input of dissolved silica to the ocean. Complete thawing of northern sea ice would have ended thermohaline circulation and led to warm and sluggish oceanic conditions inimical to the production. accumulation and preservation of biogenic silica.

Designing Digital Filters for Servo Systems

The aim of this work was to select an appropriate digital filter for a servo application and to filter the noise from the measurement devices. Low pass filter attenuates the high frequency noise beyond the specified cut-off frequency. Digital lowpass filters in both IIR and FIR responses were designed and experimentally compared to understand their characteristics from the corresponding step responses of the system. Kaiser Windowing and Equiripple methods were selected for FIR response, whereas Butterworth, Chebyshev, InverseChebyshev and Elliptic methods were designed for IIR case. Limitations in digital filter design for a servo system were analysed. Especially the dynamic influences of each designed filter on the control stabilityof the electrical servo drive were observed. The criterion for the selection ofparameters in designing digital filters for servo systems was studied. Control system dynamics was given significant importance and the use of FIR and IIR responses in different situations were compared to justify the selection of suitableresponse in each case. The software used in the filter design was MatLab/Simulink® and dSPACE's DSP application. A speed controlled Permanent Magnet Linear synchronous Motor was used in the experimental work.

Kylmämuokatun austeniittisen ruostumattoman teräsputkipalkin hitsaus

Diplomityön tavoitteena on selvittää kylmälujitetusta austeniittisesta ruostumattomasta teräksestä valmistettavan putkipalkin pituussuunnassa hitsaamalla tapahtuvaa valmistusta. Työssä tarkastellaan eri hitsausprosessien lämmöntuonnin ja putkipalkin kylmämuovaamalla tapahtuvan valmistuksen ja hitsin jälkikäsittelynvaikutuksia putkipalkin pituushitsin mekaanisiin ominaisuuksiin. Teoriaosassa on perehdytty austeniittisen ruostumattoman teräksen hitsaukseen, kylmämuokkaamalla lujitetun teräksen käyttäytymiseen hitsauksessa, monipoltinkaari-, TIG-suurtaajuuspulssi- ja kaariavusteiseen laserhitsaukseen. Kokeellisessa osassaon suoritettu koehitsauksia edellä mainituilla menetelmillä kylmälujitetulle austeniittiselle ruostumattomalle teräkselle ja suoritettu saatujen koehitsien mekaanisien ominaisuuksien arviointia. Saatujen koetulosten perusteella ontodettu, että huolimatta hitsauksen lämmöntuonnin kylmämuokatun teräksen lujuusarvoja alentavasta vaikutuksesta on mahdollista valmistaa hitsin osalta perusaineen lujuusluokituksen täyttäviä putkipalkkeja. Tämä johtuu putkipalkin kylmämuovaamalla tapahtuvan valmistuksen ja hitsin jälkikäsittelyn hitsauksessa pehmentyneen vyöhykkeen lujuusarvoja takaisin perusaineen tasolle palauttavasta vaikutuksesta.

Methylation of CpG island promoters in uveal melanoma.

BACKGROUND: Inactivation of tumour-related genes by promoter hypermethylation is a common epigenetic event in the development of a variety of tumours. AIM: To investigate in primary uveal melanoma the status of promoter methylation of genes thought to be involved in tumour development: p16, TIMP3, RASSF1, RARB, FHIT, hTERT and APC. METHODS: Gene promoter methylation was studied by methylation-sensitive single-strand conformation analysis and dot-blot assay in a series of 23 primary uveal melanomas. All DNA samples were obtained from paraffin-embedded formalin-fixed tissue blocks. RESULTS: hTERT promoter methylation was found with a relatively high frequency (52%). Promoter methylation of p16, TIMP3, RASSF1, RARB, FHIT and APC was a rare event. For none of these genes did promoter methylation exceed 15% of tumour samples, and, for some genes (FHIT and APC), no methylation was found at all. Furthermore, promoter methylation was absent in 39% (9/23) of cases. In only 22% (5/23) of cases was hypermethylation of at least two promoters observed. CONCLUSIONS: Promoter methylation of hTERT is a regular event in uveal melanoma. Hypermethylation of the other genes studied does not seem to be an essential element in the development of this tumour. As promoter methylation of APC, RASSF1 and RARB is often observed in cutaneous melanoma, these results suggest that different epigenetic events occur in the development of cutaneous and uveal melanoma.

Koivun HFV-kuivauksen kustannusvaikutukset

Työn tavoitteena on ollut selvittää HFV-kuivauksen taloudellisia vaikutuksia, kuivausmenetelmän toimintaperiaatteita, ominaisuuksia ja Lahden ammattikorkeakoulun Tekniikan laitoksen kuivaustutkimuksesta saatuja tuloksia. Tutkimuskohteeksi on valittu sydänkeskeinen koivu, joka soveltuu erinomaisesti uuden kuivausmenetelmän raaka-aineeksi, sillä sen hankintakustannukset muodostuvat tavanomaista koivusahatavaraa alhaisemmaksi ja sillä saavutetaan raaka-aineen jatkojalostusarvon huomattava nousu. Työn teoriaosassa on käsitelty puun kuivausta, sen yleisiä piirteitä ja erikuivausvaihtoehtoja. Koivun kuivauksesta ja kuivauskustannuksista löytyy varsinvähän julkaistua tutkimustietoa, jonka johdosta kuivauskustannuksia kartoitettiin myös kotimaisten havupuiden osalta. Tuoreen koivun kuivaus muutamassa tunnissa puusepänkuivaksi aihioksi ilman kuivausvirheitä on Lahden ammattikorkeakoulun Tekniikan laitoksen tutkimuksissa saatujen tuloksien mukaan mahdollista. Tässä tutkimuksessa on käsitelty neljän eri teholuokan kuivaamoinvestointivaihtoehtoa. Vaihtoehdot poikkeavat toisistaan niin hankintahinnan, tuotantokapasiteetin kuinvalmistuskustannuksienkin suhteen. Mikäli kuivaamon tuotantokapasiteetti ei olemääräävä tekijä ja investoinnilla ei ole pääomarajoitetta, niin kannattavimmaksi investointivaihtoehdoksi osoittautuu suurimman kokoluokan HFV-kuivaamolaitteisto.

Blood-Borne Circadian Signal Stimulates Daily Oscillations in Actin Dynamics and SRF Activity.

In peripheral tissues circadian gene expression can be driven either by local oscillators or by cyclic systemic cues controlled by the master clock in the brain's suprachiasmatic nucleus. In the latter case, systemic signals can activate immediate early transcription factors (IETFs) and thereby control rhythmic transcription. In order to identify IETFs induced by diurnal blood-borne signals, we developed an unbiased experimental strategy, dubbed Synthetic TAndem Repeat PROMoter (STAR-PROM) screening. This technique relies on the observation that most transcription factor binding sites exist at a relatively high frequency in random DNA sequences. Using STAR-PROM we identified serum response factor (SRF) as an IETF responding to oscillating signaling proteins present in human and rodent sera. Our data suggest that in mouse liver SRF is regulated via dramatic diurnal changes of actin dynamics, leading to the rhythmic translocation of the SRF coactivator Myocardin-related transcription factor-B (MRTF-B) into the nucleus.

Alcohol consumption and binge drinking in young adult childhood cancer survivors.

BACKGROUND: This study compared frequency of alcohol consumption and binge drinking between young adult childhood cancer survivors and the general population in Switzerland, and assessed its socio-demographic and clinical determinants. PROCEDURE: Childhood cancer survivors aged <16 years when diagnosed 1976-2003, who had survived >5 years and were currently aged 20-40 years received a postal questionnaire. Reported frequency of alcohol use and of binge drinking were compared to the Swiss Health Survey, a representative general population survey. Determinants of frequent alcohol consumption and binge drinking were assessed in a multivariable logistic regression. RESULTS: Of 1,697 eligible survivors, 1,447 could be contacted and 1,049 (73%) responded. Survivors reported more often than controls to consume alcohol frequently (OR = 1.7; 95%CI = 1.3-2.1) and to engage in binge drinking (OR = 2.9; 95%CI = 2.3-3.8). Peak frequency of binge drinking in males occurred at age 24-26 years in survivors, compared to age 18-20 in the general population. Socio-demographic factors (male gender, high educational attainment, French and Italian speaking, and migration background from Northern European countries) were most strongly associated with alcohol consumption patterns among both survivors and controls. CONCLUSIONS: The high frequency of alcohol consumption found in this study is a matter of concern. Our data suggest that survivors should be better informed on the health effects of alcohol consumption during routine follow-up, and that such counseling should be included in clinical guidelines. Future research should study motives of alcohol consumption among survivors to allow development of targeted health interventions for this vulnerable group.

Interplays between mouse mammary tumor virus and the cellular and humoral immune response.

Mouse mammary tumor virus has developed strategies to exploit the immune response. It requires vigorous immune stimulation to achieve efficient infection. The infected antigen-presenting cells present a viral superantigen on the cell surface which stimulates strong CD4-mediated T-cell help but CD8 T-cell responses are undetectable. Despite the high frequency of superantigen-reactive T cells, the superantigen-induced immune response is comparable to classical antigen responses in terms of T-cell priming, T-cell-B-cell collaboration as well as follicular and extra-follicular B-cell differentiation. Induction of systemic anergy is observed, similar to classical antigen responses where antigen is administered systemically but does not influence the role of the superantigen-reactive T cells in the maintenance of the chronic germinal center reaction. So far we have been unable to detect a cytotoxic T-cell response to mouse mammary tumor virus peptide antigens or to the superantigen. This might yet represent another step in the viral infection strategy.

Improving Dynamic Characteristics of Open-loop Controlled Log Crane

The improvement of the dynamics of flexible manipulators like log cranes often requires advanced control methods. This thesis discusses the vibration problems in the cranes used in commercial forestry machines. Two control methods, adaptive filtering and semi-active damping, are presented. The adaptive filter uses a part of the lowest natural frequency of the crane as a filtering frequency. The payload estimation algorithm, filtering of control signal and algorithm for calculation of the lowest natural frequency of the crane are presented. The semi-active damping method is basedon pressure feedback. The pressure vibration, scaled with suitable gain, is added to the control signal of the valve of the lift cylinder to suppress vibrations. The adaptive filter cuts off high frequency impulses coming from the operatorand semi-active damping suppresses the crane?s oscillation, which is often caused by some external disturbance. In field tests performed on the crane, a correctly tuned (25 % tuning) adaptive filter reduced pressure vibration by 14-17 % and semi-active damping correspondingly by 21-43%. Applying of these methods require auxiliary transducers, installed in specific points in the crane, and electronically controlled directional control valves.

Applicability of Power-Line Communications to Data Transfer of On-line Condition Monitoring of Electrical Drives

The research of power-line communications has been concentrated on home automation, broadband indoor communications and broadband data transfer in a low voltage distribution network between home andtransformer station. There has not been carried out much research work that is focused on the high frequency characteristics of industrial low voltage distribution networks. The industrial low voltage distribution network may be utilised as a communication channel to data transfer required by the on-line condition monitoring of electric motors. The advantage of using power-line data transfer is that it does not require the installing of new cables. In the first part of this work, the characteristics of industrial low voltage distribution network components and the pilot distribution network are measured and modelled with respect topower-line communications frequencies up to 30 MHz. The distributed inductances, capacitances and attenuation of MCMK type low voltage power cables are measured in the frequency band 100 kHz - 30 MHz and an attenuation formula for the cables is formed based on the measurements. The input impedances of electric motors (15-250 kW) are measured using several signal couplings and measurement based input impedance model for electric motor with a slotted stator is formed. The model is designed for the frequency band 10 kHz - 30 MHz. Next, the effect of DC (direct current) voltage link inverter on power line data transfer is briefly analysed. Finally, a pilot distribution network is formed and signal attenuation in communication channels in the pilot environment is measured. The results are compared with the simulations that are carried out utilising the developed models and measured parameters for cables and motors. In the second part of this work, a narrowband power-line data transfer system is developed for the data transfer ofon-line condition monitoring of electric motors. It is developed using standardintegrated circuits. The system is tested in the pilot environment and the applicability of the system for the data transfer required by the on-line condition monitoring of electric motors is analysed.

Magnitud y frecuencia del transporte fluvial de sedimento en una cuenca mediterránea semihúmeda

Este trabajo examina la magnitud y la frecuencia del transporte de sedimento (material disuelto, sedimento en suspensión y carga de fondo) en la cuenca de la riera de Arbúcies (Cordilleras Costeras Catalanas), a partir de los caudales diarios del periodo 1967-1992 y de las muestras de agua y sedimento obtenidas durante los años 1991 y 1992. Los resultados indican que el transporte en disolución es más uniforme en el tiempo que el transporte de material sólido, tanto en suspensión como de fondo. Los cálculos muestran que la carga sólida total depende sobre todo de crecidas frecuentes y de magnitud moderada, correspondientes al nivel de cauce lleno (bankfull). Cabe señalar, en este sentido, que los caudales bankfull suceden el 2,2% del tiempo y transportan el 56% del sedimento en suspensión y el 31% de la carga de fondo total anual. El caudal efectivo para el transporte de sedimento en este río es, por tanto, un suceso relativamente frecuente y de idéntica magnitud al caudal geomorfológicamente dominante o bankfull.

Associations of baroreflex sensitivity, heart rate variability, and initial orthostatic hypotension with prenatal and recent postnatal methylmercury exposure in the Seychelles Child Development Study at age 19 years.

BACKGROUND: A few studies have suggested an association between prenatal exposure to methylmercury and decreased heart rate variability (HRV) related to autonomic heart function, but no study has examined this association using baroreflex sensitivity (BRS). In this study we assessed the distribution of BRS and immediate orthostatic hypotension (IOH) in young Seychellois adults and their associations with exposure to prenatal and recent postnatal methylmercury. METHODS: Subjects in the Seychelles Child Development Study (SCDS) main cohort were evaluated at age 19 years. Non-invasive beat-to-beat blood pressure (BP) monitoring (Finapres, Ohmeda) was performed at rest and during active standing in 95 consecutive subjects. Recent postnatal mercury exposure was measured in subjects' hair at the age of 19 years and prenatal exposure in maternal hair grown during pregnancy. BRS was estimated by sequence analysis to identify spontaneous ascending and descending BP ramps. HRV was estimated by the following markers: PNN50 (relative numbers of normal-to-normal intervals which are shorter by more than 50 ms than the immediately following normal-to-normal intervals); rMSSD (root mean of the squared sum of successive interval differences); LF/HF (low frequency/high frequency component ratio); ratio of the mean expiratory/inspiratory RR intervals (EI ratio); and the ratio between the longest RR interval 30 s after active standing and the shortest RR interval at 15 s (Max30/Min15). IOH was estimated by the deepest BP fall within the first 15 s after active standing up. RESULTS: Prenatal MeHg exposures were similar in boys and girls (6.7±4.3, 6.7±3.8 ng/g) but recent postnatal mercury levels were higher in males than females (11.2±5.8 vs 7.9±4.3 ng/g, p=0.003). Markers of autonomic heart rate control were within the normal range (BRS: 24.8±7 ms/mm Hg, PNN50: 24.9±6.8%, rMSSD: 68±22, LF/HF: 0.61±0.28) in both sexes. After standing, 51.4% of subjects had a transient systolic BP drop>40 mm Hg, but only 5.3% reported dizziness or had syncope. Prenatal and recent postnatal MeHg levels, overall, were not associated with BRS, E/I ratio, PNN50, rMSSD, LF/HF ratio, Max30/Min15 ratio, and IOH. CONCLUSIONS: This study provides no support for the hypothesis that prenatal or recent postnatal MeHg exposure from fish consumption is associated with impaired autonomic heart rate control.