Private and municipal forests and the forestry planning system in Japan - trends and problems after World War II.

XVIII IUFRO World Congress, Ljubljana 1986.

A method for estimation of the radius of elastic-plastic boundary around cold-worked holes

The radius of an elastic-plastic boundary was measured by the strain gage method around the cold-worked region in L72-aluminum alloy. The relative radial expansion was varied from 2.5 to 6.5 percent during the cold-working process using mandrel and split sleeve. The existing theoretical studies in this area are reviewed. The experimental results are compared with existing experimental data of various investigators and with various theoretical formulations. A model is developed to predict the radius of elastic-plastic boundary, and the model is assessed by comparing with the present experiments.

The German Military Entrepreneur Ernst von Mansfeld and His Conduct of Asymmetrical Warfare in the Thirty Years War

The dissertation examines aspects of asymmetrical warfare in the war-making of the German military entrepreneur Ernst von Mansfeld during his involvement in the Thirty Years War. Due to the nature of the inquiry, which combines history with military-political theory, the methodological approach of the dissertation is interdisciplinary. The theoretical framework used is that of asymmetrical warfare. The primary sources used in the dissertation are mostly political pamphlets and newsletters. Other sources include letters, documents, and contemporaneous chronicles. The secondary sources are divided into two categories, literature on the history of the Thirty Years War and textbooks covering the theory of asymmetrical warfare. The first category includes biographical works on Ernst von Mansfeld, as well as general histories of the Thirty Years War and seventeenth-century warfare. The second category combines military theory and political science. The structure of the dissertation consists of eight lead chapters, including an introduction and conclusion. The introduction covers the theoretical approach and aims of the dissertation, and provides a brief overlook of the sources and previous research on Ernst von Mansfeld and asymmetrical warfare in the Thirty Years War. The second chapter covers aspects of Mansfeld s asymmetrical warfare from the perspective of operational art. The third chapter investigates the illegal and immoral aspects of Mansfeld s war-making. The fourth chapter compares the differing methods by which Mansfeld and his enemies raised and financed their armies. The fifth chapter investigates Mansfeld s involvement in indirect warfare. The sixth chapter presents Mansfeld as an object and an agent of image and information war. The seventh chapter looks into the counter-reactions, which Mansfeld s asymmetrical warfare provoked from his enemies. The eighth chapter offers a conclusion of the findings. The dissertation argues that asymmetrical warfare presented itself in all the aforementioned areas of Mansfeld s conduct during the Thirty Years War. The operational asymmetry arose from the freedom of movement that Mansfeld enjoyed, while his enemies were constrained by the limits of positional warfare. As a non-state operator Mansfeld was also free to flout the rules of seventeenth-century warfare, which his enemies could not do with equal ease. The raising and financing of military forces was another source of asymmetry, because the nature of early seventeenth-century warfare favoured private military entrepreneurs rather than embryonic fiscal-military states. The dissertation also argues that other powers fought their own asymmetrical and indirect wars against the Habsburgs through Mansfeld s agency. Image and information were asymmetrical weapons, which were both aimed against Mansfeld and utilized by him. Finally, Mansfeld s asymmetrical threat forced the Habsburgs to adapt to his methods, which ultimately lead to the formation of a subcontracted Imperial Army under the management and leadership of Albrecht von Wallenstein. Therefore Mansfeld s asymmetrical warfare ultimately paved way for the kind of state-monopolized, organised, and symmetrical warfare that has prevailed from 1648 onwards. The conclusion is that Mansfeld s conduct in the Thirty Years War matched the criteria for asymmetrical warfare. While traditional historiography treated Mansfeld as an anomaly in the age of European state formation, his asymmetrical warfare has begun to bear resemblance to the contemporary conflicts, where nation states no longer hold the monopoly of violence.

Victims of the White War or Rebellions of the Green Revolution? Bolivian Indigenous Women Prisoners' Position in the "War on Drugs" Explored through a Criminological Gaze

Tässä tutkielmassa tarkastellaan Bolivialaisten naisvankien (alkuperäisväestön) ja globaalin huumesodan ("War on Drugs") välistä yhteyttä. Keskustelu sijoitetaan laajemmin kokan viljelyn politiikkaan ja alkuperäisväestön kulttuuriin. Kokaa viljeleviä köyhiä maalaisia, joista huomattava osa on naisia, on vangittu Boliviassa kiihtyvää tahtia viime vuosikymmeninä. Moni naisista on kokan tuotannossa ja kaupassa mukana, sillä se on monesti ainoa keino taloudelliseen selviämiseen. Yleisesti ottaen naisvangit ja naisrikolliset ovat marginaalinen ilmiö. Kansainvälisesti tarkasteltuna naisvankien suhteellinen osuus koko vankilaväestöstä on noin 5,2 % (keskiarvo). Boliviassa osuus on vaihdellut 6,1 %:n ja 17,1 %:n välillä vuosina 2000-2008. Naisvankien määrä yleisesti ottaen on ollut rajussa kasvussa, suurin syy naisten vangitsemiseen on huumausaineisiin liittyvät rikokset. Näyttää myös siltä että vähemmistöt ja etnisen taustan omaavat henkilöt ovat yliedustettuina vankilaväestössä. Bolivia seuraa tätä kansainvälistä trendiä. Tämä tutkielma on rajattu kysymyksiin Bolivian intiaaniperäisten naisten osuudesta maan huumerikollisuudessa, sekä heidän suhteellisen korkeaa vangitsemisastetta selittäviin yhteiskunnallisiin tekijöihin. Kysymykset sukupuolesta, etnisyydestä ja kokan viljelyn politiikasta ovat keskiössä. Yleisiä kriminologisia teorioita peilataan kriittisesti suhteessa aineistoon ja Bolivian kontekstiin. Huumesodan ja Bolivian ankaran huumelainsäädännön seurauksista keskustellaan kriittisesti, sekä pohditaan köyhän alkuperäisväestön massavangitsemisen tarpeellisuutta. Tutkimuskysymykseni ovat: mitkä tekijät selittävät kohtuullisen korkean intiaaniperäisten naisvankien määrän Boliviassa, ja mikä on heidän asemansa globaalissa huumesodassa? Tutkielmassa on analysoitu kvantitatiivista ja kvalitatiivista aineistoa. Päälähteenä on ollut Bolivian tilastokeskuksen tuottamat rikostilastot. Tutkielman tärkeimpänä löydöksenä voidaan pitää havaintoa, että vastoin tiettyjä olettamuksia, intiaaniperäiset naiset ovat hyvinkin aktiivisia perinteisesti miehisiksi käsitetyillä aloilla kuten rikollisuudessa ja politiikassa. Tutkielmassa osoitetaan myös, että pidätysten määrät ovat moninkertaistuneet muutamassa vuosikymmenessä. Koska kokan viljelyssä on kyse pääasiallisesti taloudellisesta toimeentulosta, tämä tutkielma kysyy, onko hengissä pysyminen rikos?

Optimization of cold and warm workability in 304 stainless steel using instability maps

The deformation characteristics of stainless steel type AISI 3O4 under compression in the temperature range 20 degrees C to 600 degrees C and strain-rate range 0.001 to 100 s(-1) have been studied with a view to characterizing the flow instabilities occurring in the microstructure. At strain rates less than 5 s(-1), 304 stainless steel exhibits flow localization, whereas dynamic strain aging occurs at intermediate temperatures and below 0.5 s(-1). At room temperatures and strain rates less than 10 s(-1), martensite formation is observed. To avoid the preceding microstructural instabilities, cold and warm working should be carried out at strain rates greater than 5 s(-1). The continuum criterion, developed on the basis of the principles of maximum rate of entropy production and separability of the dissipation function, predicts accurately all the preceding instability features.

The fatigue crack growth rate in L-72 Al-alloy plate specimens with cold worked holes

A fatigue crack growth rate study has been carried out on L-72 aluminium alloy plate specimens with and without cold worked holes. The cold worked specimens showed significantly increased fatigue life compared to unworked specimens. Computer software is developed to evaluate the stress intensity factor for non-uniform stress distributions using Green's function approach. The exponents for the Paris equation in the stable crack growth region for cold worked and unworked specimens are 1.26 and 3.15 respectively. The reduction in exponent value indicates the retardation in crack growth rate. An SEM study indicates more plastic deformation at the edge of the hole for unworked samples as compared to the worked samples during the crack initiation period.

Optimization of cold and warm workability in stainless steel type AISI 316L using instability maps

The deformation characteristics of stainless steel type AISI 316L under compression in the temperature range 20 to 600 degrees C and strain rate range 0.001 to 100 s(-1) have been studied with a view to characterizing the flow instabilities occurring in the microstructure. At temperatures lower than 100 degrees C and strain rates higher than 0.1 s(-1), 316L stainless steel exhibits flow localization whereas dynamic strain aging (DSA) occurs at intermediate temperatures and below 1 s(-1). To avoid the above flow instabilities, cold working should be carried out at strain rates less than 0.1 s(-1). Warm working of stainless steel type AISI 316L may be done in the temperature and strain rate regime of: 300 to 400 degrees C and 0.001 s(-1) 300 to 450 degrees C and 0.01 s(-1): 450 to 600 degrees C and 0.1 s(-1); 500 degrees C and 1 s(-1) since these regions are free from flow instabilities like DSA and flow localization. The continuum criterion, developed on the basis of the principles of maximum rate of entropy production and separability of the dissipation function, predicts accurately all the above instability features.

Instability map for cold and warm working of as-cast 304 stainless steel

The deformation characteristics of as-cast 304 stainless steel under compression in the temperature range 20-600 degrees C and strain rate range 0.001-100 s(-1) have been studied with a view to characterizing the flow instabilities occurring in the microstructure. Ar strain rates of less than 0.05 s(-1), as-cast 304 stainless steel exhibits flow localization in the temperature range 20-600 degrees C, whereas dynamic strain ageing occurs at intermediate temperatures and below 5 s(-1). At room temperatures and strain rates of less than 0.05 s(-1), martensite formation is observed. To avoid the above microstructural instabilities warm working should be carried out at strain rates greater than 10 s(-1) in the temperature range 400-600 degrees C and cold working could be done in the range of about 0.05-0.8 s(-1). The continuum criterion developed on the basis of the principles of maximum rate of entropy production and separability of the dissipation function, predicts accurately all of the above instability features. (C) 1997 Elsevier Science S.A.

A cold model study of raceway hysteresis

The effect of a gas flow field on the size of raceway has been studied experimentally using a two-dimensional (2-D) cold model. It is observed that as the blast velocity from the tuyere increases, raceway size increases, and when the blast velocity is decreased from its highest value, raceway size does not change much until the velocity reaches a critical velocity. Below the critical velocity, raceway size decreases with decreasing velocity but is always larger than that for the same velocity when the velocity increased. This phenomenon is called "raceway hysteresis." Raceway hysteresis has been studied in the presence of different gas flow rates and different particle densities. Raceway hysteresis has been observed in all the experiments. The effect of liquid flow, with various superficial velocities, on raceway hysteresis has also been studied. A study of raceway size hysteresis shows that interparticle and particle-wall friction have a very large effect on raceway size. A hypothesis has been proposed to describe the hysteresis phenomenon in the packed beds. The relevance of hysteresis to blast furnace raceways has been discussed. Existing literature correlations for raceway size ignore the frictional effects. Therefore, their applicability to the ironmaking blast furnace is questionable.