Numerical Simulation of the Aerodynamic Behavior of High Velocity Trains under Synthetic Crosswinds of Different Shear and Turbulence Characteristics

A numerical simulation of the aerodynamic behavior of high-speed trains under synthetic crosswinds at a 90º yaw angle is presented. The train geometry is the aerodynamic train model (ATM). Flow description based on numerical simulations is obtained using large eddy simulation (LES) and the commercial code ANSYSFluent V14.5. A crosswind whose averaged velocity and turbulence characteristics change with distance to the ground is imposed. Turbulent fluctuations that vary temporally and spatially are simulated with TurbSim code. The crosswind boundary condition is calculated for the distance the train runs during a simulation period. The inlet streamwise velocity boundary condition is generated using Taylor?s frozen turbulence hypothesis. The model gives a time history of the force and moments acting on the train; this includes averaged values, standard deviations and extreme values. Of particular interest are the spectra of the forces and moments, and the admittance spectra. For comparison, results obtained with LES and a uniform wind velocity fluctuating in time, and results obtained with Reynolds averaged Navier Stokes equations (RANS), and the averaged wind conditions, are also presented.

Depth Averaged Models for Fast Landslide Propagation: Mathematical, Rheological and Numerical Aspects

This paper presents an overview of depth averaged modelling of fast catastrophic landslides where coupling of solid skeleton and pore fluid (air and water) is important. The first goal is to show how Biot-Zienkiewicz models can be applied to develop depth integrated, coupled models. The second objective of the paper is to consider a link which can be established between rheological and constitutive models. Perzyna´s viscoplasticity can be considered a general framework within which rheological models such as Bingham and cohesive frictional fluids can be derived. Among the several alternative numerical models, we will focus here on SPH which has not been widely applied by engineers to model landslide propagation. We propose an improvement, based on combining Finite Difference meshes associated to SPH nodes to describe pore pressure evolution inside the landslide mass. We devote a Section to analyze the performance of the models, considering three sets of tests and examples which allows to assess the model performance and limitations: (i) Problems having an analytical solution, (ii) Small scale laboratory tests, and (iii) Real cases for which we have had access to reliable information

A taste of the technical cuisine: metals and other ingredients

According to cognitive linguistics, language has an experiential origin based on perception, sensory motor activities and our knowledge of the world. Our thought operates by establishing similarities, links and associations that enable us to talk about one thing in terms of another as shown in the example of love as a journey (Lakoff and Johnson, 1980). Metaphor and metonymy are conceptual and linguistic tools that make possible most of these cognitive operations. Since metaphor is an essential element of human communication, the discourse of specialised disciplines includes metaphorical mappings and numerous examples of metaphorical expressions, for example in economics, where business is mapped in terms of war (White, 2004; Herrera & White, 2000), electrotechnics with electrical components understood as couples (Roldán- Riejos in preparation) or in civil engineering where a bridge is conceptualized as a person (Roldán-Riejos, 2013). In this paper, the metaphors: WORKING WITH METALS IS COOKING/ TRABAJAR CON METALES ES COCINAR and METALS ARE CULINARY OBJECTS/ LOS METALES SON OBJETOS CULINARIOS are explored. The main aim is to show that the cooking metaphor is widely spread in the metallurgical domain in English and Spanish, although with different nuances in each language due to socio-cultural factors. The method adopted consists of analysing examples taken from the: Bilingual Dictionary of Scientific and Technical Metaphors and Metonymies Spanish- English/English-Spanish, a forthcoming and rigorously documented bilingual dictionary that sums up research on conceptual, linguistic and visual metaphor and metonymy in different areas of engineering (Roldán-Riejos and Molina, 2013). The present paper studies in detail English and Spanish cross-linguistic correspondences related to types of metals and processes. It is suggested that they reflect synesthetic metaphoric mappings. The exploitation of cognitive conceptual metaphor in the ESP classroom is lastly recommended.

Building intuition of iron evolution during solar cell processing through analysis of different process models

An important aspect of Process Simulators for photovoltaics is prediction of defect evolution during device fabrication. Over the last twenty years, these tools have accelerated process optimization, and several Process Simulators for iron, a ubiquitous and deleterious impurity in silicon, have been developed. The diversity of these tools can make it difficult to build intuition about the physics governing iron behavior during processing. Thus, in one unified software environment and using self-consistent terminology, we combine and describe three of these Simulators. We vary structural defect distribution and iron precipitation equations to create eight distinct Models, which we then use to simulate different stages of processing. We find that the structural defect distribution influences the final interstitial iron concentration ([Fe-i]) more strongly than the iron precipitation equations. We identify two regimes of iron behavior: (1) diffusivity-limited, in which iron evolution is kinetically limited and bulk [Fe-i] predictions can vary by an order of magnitude or more, and (2) solubility-limited, in which iron evolution is near thermodynamic equilibrium and the Models yield similar results. This rigorous analysis provides new intuition that can inform Process Simulation, material, and process development, and it enables scientists and engineers to choose an appropriate level of Model complexity based on wafer type and quality, processing conditions, and available computation time.

A INFLUÊNCIA DAS PRÁTICAS PEDAGÓGICAS DOCENTES E DAS BARREIRAS DISCENTES SOBRE O DESENVOLVIMENTO DA CRIATIVIDADE DO FUTURO ADMINISTRADOR

As empresas que almejam garantir e melhorar sua posição dentro de em um mercado cada vez mais competitivo precisam estar sempre atualizadas e em constante evolução. Na busca contínua por essa evolução, investem em projetos de Pesquisa & Desenvolvimento (P&D) e em seu capital humano para promover a criatividade e a inovação organizacional. As pessoas têm papel fundamental no desenvolvimento da inovação, mas para que isso possa florescer de forma constante é preciso comprometimento e criatividade para a geração de ideias. Criatividade é pensar o novo; inovação é fazer acontecer. Porém, encontrar pessoas com essas qualidades nem sempre é tarefa fácil e muitas vezes é preciso estimular essas habilidades e características para que se tornem efetivamente criativas. Os cursos de graduação podem ser uma importante ferramenta para trabalhar esses aspectos, características e habilidades, usando métodos e práticas de ensino que auxiliem no desenvolvimento da criatividade, pois o ambiente ensino-aprendizagem pesa significativamente na formação das pessoas. O objetivo deste estudo é de identificar quais fatores têm maior influência sobre o desenvolvimento da criatividade em um curso de graduação em administração, analisando a influência das práticas pedagógicas dos docentes e as barreiras internas dos discentes. O referencial teórico se baseia principalmente nos trabalhos de Alencar, Fleith, Torrance e Wechsler. A pesquisa transversal de abordagem quantitativa teve como público-alvo os alunos do curso de Administração de uma universidade confessional da Grande São Paulo, que responderam 465 questionários compostos de três escalas. Para as práticas docentes foi adaptada a escala de Práticas Docentes em relação à Criatividade. Para as barreiras internas foi adaptada a escala de Barreiras da Criatividade Pessoal. Para a análise da percepção do desenvolvimento da criatividade foi construída e validada uma escala baseada no referencial de características de uma pessoa criativa. As análises estatísticas descritivas e fatoriais exploratórias foram realizadas no software Statistical Package for the Social Sciences (SPSS), enquanto as análises fatoriais confirmatórias e a mensuração da influência das práticas pedagógicas e das barreiras internas sobre a percepção do desenvolvimento da criatividade foram realizadas por modelagem de equação estrutural utilizando o algoritmo Partial Least Squares (PLS), no software Smart PLS 2.0. Os resultados apontaram que as práticas pedagógicas e as barreiras internas dos discentes explicam 40% da percepção de desenvolvimento da criatividade, sendo as práticas pedagógicas que exercem maior influencia. A pesquisa também apontou que o tipo de temática e o período em que o aluno está cursando não têm influência sobre nenhum dos três construtos, somente o professor influencia as práticas pedagógicas.

The structure and organization within the membrane of the helices composing the pore-forming domain of Bacillus thuringiensis δ-endotoxin are consistent with an “umbrella-like” structure of the pore

The aim of this study was to elucidate the mechanism of membrane insertion and the structural organization of pores formed by Bacillus thuringiensis δ-endotoxin. We determined the relative affinities for membranes of peptides corresponding to the seven helices that compose the toxin pore-forming domain, their modes of membrane interaction, their structures within membranes, and their orientations relative to the membrane normal. In addition, we used resonance energy transfer measurements of all possible combinatorial pairs of membrane-bound helices to map the network of interactions between helices in their membrane-bound state. The interaction of the helices with the bilayer membrane was also probed by a Monte Carlo simulation protocol to determine lowest-energy orientations. Our results are consistent with a situation in which helices α4 and α5 insert into the membrane as a helical hairpin in an antiparallel manner, while the other helices lie on the membrane surface like the ribs of an umbrella (the “umbrella model”). Our results also support the suggestion that α7 may serve as a binding sensor to initiate the structural rearrangement of the pore-forming domain.

Recovery from Pediatric Brain Injury: A Preliminary Comparison of Longitudinal Data on Psychological Symptomology and Mental Health Treatment

Objective: To document the course of psychological symptomology, mental health treatment, and unmet psychological needs using caregiver reports in the first 18 months following pediatric brain injury (BI). Method: Participants included 28 children (aged 1-18 years) who were hospitalized at a children's hospital's rehabilitation unit. Caregiver reports of children's psychological symptoms, receipt of mental health treatment, and unmet psychological needs were assessed at one month, six months, 12 months, and 18 months post-BI. Results: Caregivers reported a general increase in psychological symptoms and receipt of mental health treatment over the 18 months following BI; however, there was a substantial gap between the high rate of reported symptoms and low rate of reported treatment. Across all four follow-up time points there were substantial unmet psychological needs (at least 60% of sample). Conclusions: Findings suggest that there are substantial unmet psychological needs among children during the first 18 months after BI. Barriers to mental health treatment for this population need to be addressed.

Response of Catch-Per-Unit-Effort to Spatial and Environmental Factors: an Exploratory Data Analysis Using Generalized Additive Models

Understanding spatial distributions and how environmental conditions influence catch-per-unit-effort (CPUE) is important for increased fishing efficiency and sustainable fisheries management. This study investigated the relationship between CPUE, spatial factors, temperature, and depth using generalized additive models. Combinations of factors, and not one single factor, were frequently included in the best model. Parameters which best described CPUE varied by geographic region. The amount of variance, or deviance, explained by the best models ranged from a low of 29% (halibut, Charlotte region) to a high of 94% (sablefish, Charlotte region). Depth, latitude, and longitude influenced most species in several regions. On the broad geographic scale, depth was associated with CPUE for every species, except dogfish. Latitude and longitude influenced most species, except halibut (Areas 4 A/D), sablefish, and cod. Temperature was important for describing distributions of halibut in Alaska, arrowtooth flounder in British Columbia, dogfish, Alaska skate, and Aleutian skate. The species-habitat relationships revealed in this study can be used to create improved fishing and management strategies.

A novel hybrid simulation-optimization approach for the optimal design of multicomponent distillation columns

Póster presentado en Escape 22, European Symposium on Computer Aided Process Engineering, University College London, UK, 17-20 June 2012.

A hybrid simulation-optimization approach for the design of internally heat-integrated distillation columns

Paper submitted to AIChE 2012 Annual Meeting: Energy Efficiency by Process Intensification, Pittsburgh, PA, October 28-November 2, 2012.

Outsourcing and strategy in Spanish town halls: a field study

Purpose – This study seeks to analyse the links between strategies, structures and processes in the case of the largest Spanish town halls, using the Miles and Snow's models about organisational strategies, and asking the following questions: “What is the situation of municipal services' outsourcing in the largest Spanish town halls?”; “Do Spanish town halls follow the strategies suggested in Miles and Snow's model?”; and “Is there a relationship between the strategic position adopted by town halls and their stance on outsourcing?”. Design/methodology/approach – In order to achieve these aims a questionnaire was administered to the human resource managers in the town halls of the largest Spanish cities. Findings – The paper finds that outsourcing is a complement, which seeks to improve the services delivered, and local institutions do not resort to it due to a lack of internal resources but as a way to complement their own capabilities. Originality/value – The paper has identified three distinct strategic profiles in the town halls interviewed which coincide with the profiles that Miles and Snow call prospective, defensive and reactive strategies. It reveals that town halls which outsource to a greater extent are the ones which identify more with the prospective or reactive strategy, whereas those which outsource less are closer to the defensive strategy.

Integration of different models in the design of chemical processes: Application to the design of a power plant

With advances in the synthesis and design of chemical processes there is an increasing need for more complex mathematical models with which to screen the alternatives that constitute accurate and reliable process models. Despite the wide availability of sophisticated tools for simulation, optimization and synthesis of chemical processes, the user is frequently interested in using the ‘best available model’. However, in practice, these models are usually little more than a black box with a rigid input–output structure. In this paper we propose to tackle all these models using generalized disjunctive programming to capture the numerical characteristics of each model (in equation form, modular, noisy, etc.) and to deal with each of them according to their individual characteristics. The result is a hybrid modular–equation based approach that allows synthesizing complex processes using different models in a robust and reliable way. The capabilities of the proposed approach are discussed with a case study: the design of a utility system power plant that has been decomposed into its constitutive elements, each treated differently numerically. And finally, numerical results and conclusions are presented.

Impact of economic crisis on mental health of migrant workers: what happened with migrants who came to Spain to work?

Objectives: To assess changes in mental health in a sample of migrant workers after the eruption of the economic crisis in Spain. Methods: 318 migrant workers were interviewed. Mental health, sociodemographic, and economic crisis related variables were obtained through face-to-face (2008) and phone (2011) interviews. Prevalence of poor mental health (PMH) was compared (2011–2008) and multivariate logistic regression models were fitted. Results: Change in prevalence of PMH was higher in men (aOR 4.63; 95 % CI 2.11–10.16). Subgroups of men showing the largest detrimental mental health effects were: unemployed, with low salaries (≤1,200 euros) and those reporting family burden. An increase of PMH was found in women, without significant associations. Conclusions: Mental health of migrant workers in Spain has worsened during the economic crisis.

From the boom to the crisis: changes in employment conditions of immigrants in Spain and their effects on mental health

Background: Migrant workers have been one of the groups most affected by the economic crisis. This study evaluates the influence of changes in employment conditions on the incidence of poor mental health of immigrant workers in Spain, after a period of 3 years, in context of economic crisis. Methods: Follow-up survey was conducted at two time points, 2008 and 2011, with a reference population of 318 workers from Colombia, Ecuador, Morocco and Romania residing in Spain. Individuals from this population who reported good mental health in the 2008 survey (n = 214) were interviewed again in 2011 to evaluate their mental health status and the effects of their different employment situations since 2008 by calculating crude and adjusted odds ratios (aORs) for sociodemographic and employment characteristics. Findings: There was an increased risk of poor mental health in workers who lost their jobs (aOR = 3.62, 95%CI: 1.64–7.96), whose number of working hours increased (aOR = 2.35, 95%CI: 1.02–5.44), whose monthly income decreased (aOR = 2.75, 95%CI: 1.08–7.00) or who remained within the low-income bracket. This was also the case for people whose legal status (permission for working and residing in Spain) was temporary or permanent compared with those with Spanish nationality (aOR = 3.32, 95%CI: 1.15–9.58) or illegal (aOR = 17.34, 95%CI: 1.96–153.23). In contrast, a decreased risk was observed among those who attained their registration under Spanish Social Security system (aOR = 0.10, 95%CI: 0.02–0.48). Conclusion: There was an increase in poor mental health among immigrant workers who experienced deterioration in their employment conditions, probably influenced by the economic crisis.

Modelling a biomass supply chain through discrete-event simulation

The organizational structure of the companies in the biomass energy sector, regarding the supply chain management services, can be greatly improved through the use of software decision support tools. These tools should be able to provide real-time alternative scenarios when deviations from the initial production plans are observed. To make this possible it is necessary to have representative production chain process models where several scenarios and solutions can be evaluated accurately. Due to its nature, this type of process is more adequately represented by means of event-based models. In particular, this work presents the modelling of a typical biomass production chain using the computing platform SIMEVENTS. Throughout the article details about the conceptual model, as well as simulation results, are provided