Estudo da viabilidade do sistema LZAS para uso como selante de PaCOS

Cells the solid oxide fuel are systems capable to directly convert energy of a chemical reaction into electric energy in clean, quiet way and if its components in the solid state differentiate of excessively the techniques for having all. Its more common geometric configurations are: the tubular one and to glide. Geometry to glide beyond the usual components (anode, cathode and electrolyte) needs interconnect and sealant. E the search for materials adjusted for these components is currently the biggest challenge found for the production of the cells. The sealants need to present chemical stability in high temperatures, to provoke electric isolation, to have coefficient of compatible thermal expansion with the excessively component ones. For presenting these characteristics the glass-ceramics materials are recommended for the application. In this work the study of the partial substitution of the ZrO2 for the Al2O3 in system LZS became it aiming at the formation of system LZAS, this with the addition of natural spodumene with 10, 20 and 30% in mass. The compositions had been casting to a temperature of 1500°C and later quickly cooled with the objective to continue amorphous. Each composition was worn out for attainment of a dust with average diameter of approximately 3μm and characterized by the techniques of DRX, FRX, MEV, dilatometric analysis and particle size analysis. Later the samples had been conformed and treated thermally with temperatures in the interval between 700-1000 °C, with platform of 10 minutes and 1 hour. The analyses for the treated samples had been: dilatometric analysis, DRX, FRX, electrical conductivity and tack. The results point with respect to the viability of the use of system LZAS for use as sealant a time that had presented good results as isolating electric, they had adhered to a material with similar α of the components of a SOFC and had presented steady crystalline phases

Síntese de catalisadores do tipo LaNixFe1-xO3 como precursores catalíticos para reação oxidação parcial do metano

Nickel-bases catalysts have been used in several reform reactions, such as in the partial oxidation of methane to obtain H2 or syngas (H2 + CO). High levels of conversion are usually obtained using this family of catalysts, however, their deactivation resulting from carbon deposition still remains a challenge. Different approaches have been tested aiming at minimizing this difficulty, including the production of perovskites and related structures using modern synthesis methods capable of producing low cost materials with controlled microstructural characteristics at industrial scale. To establish grounds for comparison, in the present study LaNixFe1-xO3 (x=0, 0.3 or 0.7) perovskites were prepared following the Pechini method and by microwave assisted self-combustion. All samples were sub sequently calcined at 900 °C to obtain the target phase. The resulting ceramic powders were characterized by thermogravimetric analysis, infrared spectroscopy, X ray diffraction, specific area and temperature programmed reduction tests. Calcined samples were also used in the partial oxidation reaction of methane to evaluate the level of conversion, selectivity and carbon deposition. The results showed that the calcined samples were crystalline and the target phase was formed regardless of the synthesis method. According to results obtained by Rietveld refinement, we observed the formation of 70.0% of LaNi0.3Fe0.7O3 and 30.0% of La2O3 for samples LN3F7-900- P, LN3F7-900-M and 41,6% of LaNi0.7Fe0.3O3, 30.7% of La2NiO4 and 27.7% of La2O3 for samples LN7F3-900-P and LN7F3-900-M.Temperature-programmed profiles of the LaNiO3 sample revealed the presence of a peak around 510 °C, whereas the LaFeO3 sample depicted a peak above 1000°C. The highest l evel of methane conversion was obtained for LaNiO3 synthesized by the Pechini method. Overall, catalysts prepared by the Pechini method depicted better conversion levels compared to those produced by microwave assisted self-combustion

Síntese e caracterização de CuNb2O6 e CuNbC através de reação sólido- sólido e gás- sólido a baixa temperatura

The refractory metal carbides have proven important in the development of engineering materials due to their properties such as high hardness, high melting point, high thermal conductivity and high chemical stability. The niobium carbide presents these characteristics. The compounds of niobium impregnated with copper also have excellent dielectric and magnetic properties, and furthermore, the Cu doping increases the catalytic activity in the oxidation processes of hydrogen. This study aimed to the synthesis of nanostructured materials CuNbC and niobium and copper oxide from precursor tris(oxalate) oxiniobate ammonium hydrate through gas-solid and solid-solid reaction, respectively. Both reactions were carried out at low temperature (1000°C) and short reaction time (2 hours). The niobium carbide was produced with 5 % and 11% of copper, and the niobium oxide with 5% of copper. The materials were characterized by X-Ray Diffraction (XRD), Rietveld refinement, Scanning Electron Microscopy (SEM), X-Ray Fluorescence Spectroscopy (XRF), infrared spectroscopy (IR), thermogravimetric (TG) and differential thermal analysis (DTA , BET and particle size Laser. From the XRD analysis and Rietveld refinement of CuNbC with S = 1.23, we observed the formation of niobium carbide and metallic copper with cubic structure. For the synthesis of mixed oxide made of niobium and copper, the formation of two distinct phases was observed: CuNb2O6 and Nb2O5, although the latter was present in small amounts

Influência das tensões tectônicas na permeabilidade da formação Açu - Bacia Potiguar

The behavior of the fluid flux in oil fields is influenced by different factors and it has a big impact on the recovery of hydrocarbons. There is a need of evaluating and adapting the actual technology to the worldwide reservoirs reality, not only on the exploration (reservoir discovers) but also on the development of those that were already discovered, however not yet produced. The in situ combustion (ISC) is a suitable technique for these recovery of hydrocarbons, although it remains complex to be implemented. The main objective of this research was to study the application of the ISC as an advanced oil recovery technique through a parametric analysis of the process using vertical wells within a semi synthetic reservoir that had the characteristics from the brazilian northwest, in order to determine which of those parameters could influence the process, verifying the technical and economical viability of the method on the oil industry. For that analysis, a commercial reservoir simulation program for thermal processes was used, called steam thermal and advanced processes reservoir simulator (STARS) from the computer modeling group (CMG). This study aims, through the numerical analysis, find results that help improve mainly the interpretation and comprehension of the main problems related to the ISC method, which are not yet dominated. From the results obtained, it was proved that the mediation promoted by the thermal process ISC over the oil recovery is very important, with rates and cumulated production positively influenced by the method application. It was seen that the application of the method improves the oil mobility as a function of the heating when the combustion front forms inside the reservoir. Among all the analyzed parameters, the activation energy presented the bigger influence, it means, the lower the activation energy the bigger the fraction of recovered oil, as a function of the chemical reactions speed rise. It was also verified that the higher the enthalpy of the reaction, the bigger the fraction of recovered oil, due to a bigger amount of released energy inside the system, helping the ISC. The reservoir parameters: porosity and permeability showed to have lower influence on the ISC. Among the operational parameters that were analyzed, the injection rate was the one that showed a stronger influence on the ISC method, because, the higher the value of the injection rate, the higher was the result obtained, mainly due to maintaining the combustion front. In connection with the oxygen concentration, an increase of the percentage of this parameter translates into a higher fraction of recovered oil, because the quantity of fuel, helping the advance and the maintenance of the combustion front for a longer period of time. About the economic analysis, the ISC method showed to be economically feasible when evaluated through the net present value (NPV), considering the injection rates: the higher the injection rate, the higher the financial incomes of the final project

Simulação de fluxo de fluidos em meios porosos desordenados uma análise de efeito de escala na estimativa da permeabilidade e do coeficiente de arrasto

The present study provides a methodology that gives a predictive character the computer simulations based on detailed models of the geometry of a porous medium. We using the software FLUENT to investigate the flow of a viscous Newtonian fluid through a random fractal medium which simplifies a two-dimensional disordered porous medium representing a petroleum reservoir. This fractal model is formed by obstacles of various sizes, whose size distribution function follows a power law where exponent is defined as the fractal dimension of fractionation Dff of the model characterizing the process of fragmentation these obstacles. They are randomly disposed in a rectangular channel. The modeling process incorporates modern concepts, scaling laws, to analyze the influence of heterogeneity found in the fields of the porosity and of the permeability in such a way as to characterize the medium in terms of their fractal properties. This procedure allows numerically analyze the measurements of permeability k and the drag coefficient Cd proposed relationships, like power law, for these properties on various modeling schemes. The purpose of this research is to study the variability provided by these heterogeneities where the velocity field and other details of viscous fluid dynamics are obtained by solving numerically the continuity and Navier-Stokes equations at pore level and observe how the fractal dimension of fractionation of the model can affect their hydrodynamic properties. This study were considered two classes of models, models with constant porosity, MPC, and models with varying porosity, MPV. The results have allowed us to find numerical relationship between the permeability, drag coefficient and the fractal dimension of fractionation of the medium. Based on these numerical results we have proposed scaling relations and algebraic expressions involving the relevant parameters of the phenomenon. In this study analytical equations were determined for Dff depending on the geometrical parameters of the models. We also found a relation between the permeability and the drag coefficient which is inversely proportional to one another. As for the difference in behavior it is most striking in the classes of models MPV. That is, the fact that the porosity vary in these models is an additional factor that plays a significant role in flow analysis. Finally, the results proved satisfactory and consistent, which demonstrates the effectiveness of the referred methodology for all applications analyzed in this study.

Prevalência da infecção genital pelo vírus herpes simples tipo 1 e 2 em mulheres grávidas e não grávidas de Natal/RN

Herpes simplex is a virus that can be transmitted sexually and is potentially associated with vertical transmission. This study evaluated the prevalence of genital infection by herpes simplex virus (HSV) types 1 and 2 in pregnant and nonpregnant care in the city of Natal / RN, including a total of 222 women, 92 pregnant and 130 nonpregnant. The participants answered a questionnaire to obtain data and socio-demographic characteristics, as well as potential risk factors for sexually transmitted diseases. After the interview, we collected two cervical specimens, one for the Pap test and the other for DNA extraction and analyzed by polymerase chain reaction (PCR) to detect both virus serotypes. Then the women underwent a clinical examination by colposcopy. For statistical analysis, we used the chi-square and logistic regression by SSPS 17.0 Statistic. Most women were up to 30 years of age, nonwhite ethnicity, married, elementary education, family income below the poverty level; initiated sexual activity with age up to 18 years; had more than one sexual partner lifelong and was not pregnant, but has had at least one child. The HSV-1 showed a prevalence of 26.1% among pregnant women and 30.0% in non-pregnant women. While HSV-2 prevalence was found with 10.9% and 19.2% in pregnant and nonpregnant women, respectively. The largest proportion of morphological changes of the uterine cervix was detected among nonpregnant women, both in cytology and in colposcopy. The women were nonwhite ethnicity, married, became pregnant aged less than or equal to 18 years and who had one to two pregnancies had a lower risk of acquiring genital HSV infection. There was a high prevalence of genital HSV infection, HSV-1 is more prevalent than HSV-2. No association was found between morphological changes of the uterine cervix and the presence of the virus in pregnant and nonpregnant women, nor between genital HSV infection and the classic risk factors for sexually transmitted diseases

Vertical distribution of benthic invertebrate larvae during an upwelling event along a transect off the tropical Brazilian continental margin

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Flutuação populacional e distribuição vertical de Brevicoryne brassicae (L.) (Hemiptera: Aphididae) em couve

O conhecimento da dinâmica populacional e da distribuição vertical de insetos pragas em plantas hospedeiras é fundamental para o desenvolvimento de programas de manejo integrado de pragas. No presente trabalho efetuou-se um levantamento populacional de formas ápteras do pulgão Brevicoryne brassicae (L.), visando determinar a época de maior densidade populacional e a distribuição vertical em plantas de couve, (Brassica oleracea L. var. acephala DC.), cultivadas em Jaboticabal, SP. O estudo foi realizado durante as safras de brássicas de 1998 e 1999, efetuando-se correção da acidez do solo por meio de aplicação de calcário apenas no campo utilizado em 1998. A amostragem dos pulgões foi feita visualmente em folhas classificadas em três categorias: apical, mediana e basal. Nas duas safras estudadas, a infestação de B. brassicae na couve atingiu a maior densidade populacional em setembro, diminuindo rapidamente a seguir. Nos dois campos não se observou a mesma distribuição de B. brassicae em folhas apicais, medianas e basais. Os fatores que podem ter contribuído para as diferenças observadas no padrão de distribuição do pulgão devem estar relacionados com a precipitação pluvial e o calcário magnesiano.

Vertical growth of mini watermelon according to the training height and plant density

A melancia é uma espécie tradicionalmente conduzida em campo no sistema rasteiro. As cultivares de frutos pequenos (1 a 3 kg), que adquirem melhores preços de mercado, vêm sendo cultivadas também em ambiente protegido, onde são conduzidas no sistema vertical, com poda de ramos e raleio de frutos. Essas práticas possibilitam aumentar o adensamento das plantas, a qualidade e a produtividade de frutos em comparação ao sistema rasteiro. Objetivou-se com este trabalho avaliar a influência de três alturas de condução (1,7; 2,2 e 2,7 m) e duas densidades de plantas (3,17 e 4,76 plantas m-2) sobre as características produtivas e qualitativas da mini melancia Smile cultivada em ambiente protegido. A poda da haste principal foi realizada aos 43, 55 e 66 dias após o transplante (DAT) para as alturas de condução de 1,7; 2,2 e 2,7 m, respectivamente. A massa seca dos ramos, dos pecíolos, das folhas e total foram afetados pela altura de condução, cujos maiores valores foram obtidos para as plantas conduzidas a 2,2 e 2,7 m de altura. A área foliar, a área foliar específica e o índice de área foliar não foram influenciados pela altura de condução das plantas. A altura de condução de 2,7 m elevou a produtividade total. Entretanto, a produtividade comercial, a massa média dos frutos e todas as características qualitativas não foram significativamente diferentes das obtidos pela altura de poda de 2,2 m. em relação à densidade de plantas, a melhor opção foi a de 4,76 plantas m-2, pois elevou a produtividade comercial em 37,4% sem reduzir a massa média dos frutos.

Avaliação de características morfométricas na relação solo-superfície da Bacia Hidrográfica do Córrego Rico, Jaboticabal (SP)

Com a análise das características morfométricas procura-se entender a relação solo-superfície, em decorrência dos processos erosivos sobre estruturas e litologias variadas. Neste trabalho, objetivou-se avaliar as características morfométricas do padrão de drenagem e do relevo em microbacias hidrográficas de 2ª ordem de magnitude, em Latossolo Vermelho-Escuro e Argissolo Vermelho-Amarelo, com vistas ao planejamento agroambiental da Bacia Hidrográfica do Córrego Rico, município de Jaboticabal, SP. O estudo foi baseado em fotografias aéreas, pancromáticas, verticais na escala 1:35.000 da região administrativa de Ribeirão Preto. Com técnicas de fotointerpretação, foram traçadas a rede de drenagem e respectivas microbacias hidrográficas, onde as variáveis selecionadas foram determinadas. As classes de risco de degradação, resultando no uso potencial do solo, foram determinadas de acordo com o coeficiente de rugosidade. As características do padrão de drenagem e do relevo repercutiram no comportamento hidrológico e litológico das microbacias hidrográficas, possibilitando a diferenciação entre as unidades de solos. A densidade de drenagem e a amplitude altimétrica foram as características que mais contribuíram para o poder discriminatório na relação solo-superfície. Na análise conjunta do potencial de uso do solo, verificou-se, principalmente, adequação para agricultura nos Latossolos e pecuária e, ou, reflorestamento nos Argissolos.

Distribuição espacial de Phytophthora nicotianae e reação de cultivares de cebola ao fungo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da reação em cadeia da polimerase e do isolamento bacteriológico convencional na detecção de Salmonella Dublin em amostras de fezes de bezerros infectados experimentalmente

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparação do isolamento microbiológico e da reação em cadeia da polimerase no diagnóstico de salmonelose em bezerros infectados experimentalmente com Salmonella Typhimurium

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cultura da soja em função da profundidade de semeadura e da carga vertical sobre a fileira de semeadura

A análise do efeito da profundidade de semeadura e carga vertical visando a melhorar o aproveitamento, e a integração entre o solo e a cultura é muito difícil. O objetivo do presente trabalho foi avaliar cargas verticais (0; 98; 196 e 294 N) sobre as rodas compactadoras das semeadoras, combinando com profundidades de semeadura (0,03; 0,05 e 0,07 m) para a cultura da soja. O trabalho foi realizado no DER/UNESP - Jaboticabal, na pista de ensaio do Laboratório de Máquinas e Mecanização Agrícola (LAMMA), utilizando o delineamento experimental em blocos casualizados, no esquema fatorial (4 x 3), com 12 tratamentos e três repetições, totalizando 36 observações. Foram analisados: emergência de plântulas, estandes inicial e final, índice de sobrevivência, área mobilizada e rendimento de grãos. Os resultados evidenciaram que, com exceção da área mobilizada em relação à profundidade de semeadura, todas as demais variáveis não foram influenciadas pelos tratamentos.

Reação de plantas de amendoim (Arachis hypogaea L. ) ao trifluralin e mudanças na morfologia da parte subterrânea

Com o objetivo de reproduzir sintomas de malformação de raízes, observados em campo, foram estuda dos os efeitos do trifluralin sobre Arachis hypogaea L., cultivar Tatu, em condições de vaso, em Jaboticabal, SP. Quatro formulações de trifluralin foram aplicadas em solo Latossol Roxo - série Jaboticabal, barro argiloso, com 2,7% de matéria orgânica, em dosagem correspondentes a 1,5; 3,0 e 6,0 litros da formulação comercial por ha. Cada vaso contendo 2,5 1 -de solo, recebeu duas sementes pré -germinada s e foi mantido sob condições de casa-de-vegetação durante 29 dias. Foi adotado o delineamento inteiramente casualizado com treze tratamentos e quatro repetições, perfazendo total de 52 parcelas. Aos 29 dias as plantas, foram retiradas e determinadas as seguintes características: peso da matéria seca das raízes, dos caules, dos pecíolos e dos folíolos; número de folíolos; área foliar e comprimento da haste principal. Alterações morfológicas externas e internas foram observadas. Os resultados mostraram que as partes subter rân eas das plantas foram afetadas, com uma correlação linear negativa e significativa entre o aumento da dose dos herbicidas e peso da matéria. As folhas se mostraram pouco sensíveis, sendo que nenhuma das formulações diminuiu o número de foliolos da planta. A área foliar e o peso da matéria seca dos folíolos somente foram afetados pelo aumento da dose de T. Fecotrigo com va lores de F iguais a 9,62* e 7,61*, respectivamente. de modo geral,po de-se concluir que o maior efeito ocorre devido ao incremento nas doses e não devido a possiveis diferenças entre os tipos de formula ções testadas. Quanto a alterações morfológicas observou-se que nas doses mais elevadas houve grande diminuição na quantidade de raízes, com raízes secundárias curtas e grossas. O hipocótilo emitiu raízes até a altura do nó cotiledonar. Na dose de 3,0 1/ha já foram notadas raízes secundárias um pouco mais espessas que na dose de 1,5 1/ha. As lâminas histológicas de amostras da re gião do hipocótilo mostraram parên quima cortical bastante espesso, de vido ao maior numero de camadas de células, porém não se notou anormalidade na forma das células, nem nos demais tecidos da região estudada.