Time-division-multiplexing using pulse position locking for 100 Gb/s applications

Recently, there is a great interest in pushing communication technologies to 100 Gb/s. However, there are still many challenges to perform high speed (> 40 Gb/s) clock and data recovery, and data time-division-multiplexing (TDM). Here, we propose and numerically analyze an asynchronous optical packet retimer using parabolic or sinusoidal phase modulation and linear dispersion. This scheme is named pulse position locking (PPL). Numerical simulation shows that this scheme can effectively resynchronize input signals with arbitrary delays to the local clock, and reduce input jitter. The scheme can also be applied to TDM 10 Gb/s and 40 Gb/s signals to over 100 Gb/s.

40 Gbit/s asynchronous digital optical regenerator

We present the first experimental demonstration of an asynchronous digital optical regenerator at 42.67 Gbit/s. The system effectively retimes incoming asynchronous data bursts to a local clock without burst mode clock recovery and converts the signal to a desired wavelength and duty cycle.

Asynchronous digital optical regenerator for 4 x 40 Gbit/s WDM to 160 Gbit/s OTDM conversion

We propose and numerically analyse an asynchronous digital optical regenerator using a single-EAM loop and a novel neighbor-combine approach. It effectively re-synchronizes input signals with arbitrary phases to the local clock, and regenerates signals with high amplitude fluctuation and polarization mode dispersion. We demonstrate the application of this regenerator for 4 x 40 Gbit/s WDM to 160 Gbit/s OTDM conversion.

Asynchronous digital optical regenerator for 4 x 40 Gbit/s WDM to 160 Gbit/s OTDM conversion

We propose and numerically analyse an asynchronous digital optical regenerator using a single-EAM loop and a novel neighbor-combine approach. It effectively re-synchronizes input signals with arbitrary phases to the local clock, and regenerates signals with high amplitude fluctuation and polarization mode dispersion. We demonstrate the application of this regenerator for 4 x 40 Gbit/s WDM to 160 Gbit/s OTDM conversion.

Semiconductor optical amplifier-based nonlinear optical-loop mirror with feedback

The behavior of a semiconductor optical amplifier (SOA)-based nonlinear loop mirror with feedback has been investigated as a potential device for all-optical signal processing. In the feedback device, input signal pulses (ones) are injected into the loop, and amplified reflected pulses are fed back into the loop as switching pulses. The feedback device has two stable modes of operation - block mode, where alternating blocks of ones and zeros are observed, and spontaneous clock division mode, where halving of the input repetition rate is achieved. Improved models of the feedback device have been developed to study its performance in different operating conditions. The feedback device could be optimized to give a choice of either of the two stable modes by shifting the arrival time of the switching pulses at the SOA. Theoretically, it was found possible to operate the device at only tens of fJ switching pulse energies if the SOA is biased to produce very high gain in the presence of internal loss. The clock division regime arises from the combination of incomplete SOA gain recovery and memory of the startup sequence that is provided by the feedback. Clock division requires a sufficiently high differential phase shift per unit differential gain, which is related to the SOA linewidth enhancement factor.

One's own country and familiar places in the mind's eye:different topological representations for navigational and non-navigational contents

Visual mental imagery is a process that draws on different cognitive abilities and is affected by the contents of mental images. Several studies have demonstrated that different brain areas subtend the mental imagery of navigational and non-navigational contents. Here, we set out to determine whether there are distinct representations for navigational and geographical images. Specifically, we used a Spatial Compatibility Task (SCT) to assess the mental representation of a familiar navigational space (the campus), a familiar geographical space (the map of Italy) and familiar objects (the clock). Twenty-one participants judged whether the vertical or the horizontal arrangement of items was correct. We found that distinct representational strategies were preferred to solve different categories on the SCT, namely, the horizontal perspective for the campus and the vertical perspective for the clock and the map of Italy. Furthermore, we found significant effects due to individual differences in the vividness of mental images and in preferences for verbal versus visual strategies, which selectively affect the contents of mental images. Our results suggest that imagining a familiar navigational space is somewhat different from imagining a familiar geographical space. © 2014 Elsevier Ireland Ltd.

A sphere of resonance for networked learning in the ‘non-places’ of our universities

The logic of ‘time’ in modern capitalist society appears to be a fixed concept. Time dictates human activity with a regularity, which as long ago as 1944, George Woodcock referred to as The Tyranny of the Clock. Seventy years on, Hartmut Rosa suggests humans no longer maintain speed to achieve something new, but simply to preserve the status quo, in a ‘social acceleration’ that is lethal to democracy. Political engagement takes time we no longer have, as we rush between our virtual spaces and ‘non-places’ of higher education. I suggest it’s time to confront the conspirators that, in partnership with the clock, accelerate our social engagements with technology in the context of learning. Through Critical Discourse Analysis (CDA) I reveal an alarming situation if we don’t. With reference to Bauman’s Liquid Modernity, I observe a ‘lightness’ in policy texts where humans have been ‘liquified’ Separating people from their own labour with technology in policy maintains the flow of speed a neoliberal economy demands. I suggest a new ‘solidity’ of human presence is required as we write about networked learning. ‘Writing ourselves back in’ requires a commitment to ‘be there’ in policy and provide arguments that decelerate the tyranny of time. I am though ever-mindful that social acceleration is also of our own making, and there is every possibility that we actually enjoy it.

Genome-wide association analysis identifies novel loci for chronotype in 100,420 individuals from the UK Biobank

Our sleep timing preference, or chronotype, is a manifestation of our internal biological clock. Variation in chronotype has been linked to sleep disorders, cognitive and physical performance, and chronic disease. Here we perform a genome-wide association study of self-reported chronotype within the UK Biobank cohort (n=100,420). We identify 12 new genetic loci that implicate known components of the circadian clock machinery and point to previously unstudied genetic variants and candidate genes that might modulate core circadian rhythms or light-sensing pathways. Pathway analyses highlight central nervous and ocular systems and fear-response-related processes. Genetic correlation analysis suggests chronotype shares underlying genetic pathways with schizophrenia, educational attainment and possibly BMI. Further, Mendelian randomization suggests that evening chronotype relates to higher educational attainment. These results not only expand our knowledge of the circadian system in humans but also expose the influence of circadian characteristics over human health and life-history variables such as educational attainment.

Fast-Food Franchises: An Alternative Menu for Hotel/Casinos

In their discussion - Fast-Food Franchises: An Alternative Menu for Hotel/Casinos - by Skip Swerdlow, Assistant Professor of Finance, Larry Strate, Assistant Professor of Business Law, and Francis X. Brown, Assistant Professor of Hotel Administration at the University of Nevada, Las Vegas, their preview reads: Hotel/casino food service operations are adding some non-traditional fare to their daily offerings in the form of fast-food franchises. The authors review aspects of franchising and cite some new Las Vegas food ideas.” The authors offer that the statewide food and beverage figures, according to the Nevada Gaming Abstract of 1985, exceeded $1.24 billion. Most of that figure was generated in traditional coffee shops, gourmet dining rooms, and buffets. With that kind of food and beverage figure solidly on the table, it was inevitable that fast-food franchises would move into casinos to garner a share of the proceeds. In a March 1986 review of franchising, Restaurant Business reported the following statistics: “Over 60 percent of all restaurants are franchisee owned. This relationship is also paralleled in dollar sales, which has exceeded $53 billion.” “Restaurant franchising expansion has grown at an annual rate of 12 percent per year for the past five years.” The beginning of the article is dedicated to describing, in general, the franchise phenomenon; growth has been spectacular the authors inform you. “The franchise concept has provided an easy method of going into business for the entrepreneur with minimal business experience, but a desire to work hard to make a profit,” say professors Swerdlow, Strate, and Brown. Lured by tourist traffic, and the floundering Chapter 11 afflicted, Riviera Hotel and Casino in Las Vegas, Burger King saw an attractive opportunity for an experiment in non-traditional outlet placement, say the authors. Although innately transient, the tourist numbers were way too significant to ignore. That tourist traffic, the authors say, is ‘round-the-clock. Added to that figure is the 2000-3000 average employee count for many of the casinos on the ‘Vegas strip. Not surprisingly, the project began to look very appealing to both Burger King and the Riviera Hotel/Casino, the authors report. In the final analysis, the project did work out well; very well indeed. So it is written, “The successful operation of the Burger King in the Riviera has sparked interest by other existing hotel/casino operations and fast-food restaurant chains. Burger King's operation, like so many other industry leadership decisions, provides impetus for healthy competition in a market that is burgeoning not only because of expansion that recognizes traditional population growth, but because of bold moves that search for customers in non-traditional areas.” The authors provide an Appendix listing Las Vegas hotel/casino properties and the restaurants they contain.

A neuromodulação do córtex pré-frontal dorsolateral na percepção de tempo em contexto neutro ou emocionalmente ativo

The time perception is critical for environmental adaptation in humans and other species. The temporal processing, has evolved through different neural systems, each responsible for processing different time scales. Among the most studied scales is that spans the arrangement of seconds to minutes. Evidence suggests that the dorsolateral prefrontal (DLPFC) cortex has relationship with the time perception scale of seconds. However, it is unclear whether the deficit of time perception in patients with brain injuries or even "reversible lesions" caused by transcranial magnetic stimulation (TMS) in this region, whether by disruption of other cognitive processes (such as attention and working memory) or the time perception itself. Studies also link the region of DLPFC in emotional regulation and specifically the judgment and emotional anticipation. Given this, our objective was to study the role of the dorsolateral prefrontal cortex in the time perception intervals of active and emotionally neutral stimuli, from the effects of cortical modulation by transcranial direct current stimulation (tDCS), through the cortical excitation (anodic current), inhibition (cathode current) and control (sham) using the ranges of 4 and 8 seconds. Our results showed that there is an underestimation when the picture was presented by 8 seconds, with the anodic current in the right DLPFC, there is an underestimation and with cathodic current in the left DLPFC, there is an overestimation of the time reproduction with neutral ones. The cathodic current over the left DLPFC leads to an inverse effect of neutral ones, an underestimation of time with negative pictures. Positive or negative pictures improved estimates for 8 second and positive pictures inhibited the effect of tDCS in DLPFC in estimating time to 4 seconds. With this work, we conclude that the DLPFC plays a key role in the o time perception and largely corresponds to the stages of memory and decision on the internal clock model. The left hemisphere participates in the perception of time in both active and emotionally neutral contexts, and we can conclude that the ETCC and an effective method to study the cortical functions in the time perception in terms of cause and effect.

Protótipo de rastreador solar de um eixo baseado em microcontrolador

The increase in the efficiency of photo-voltaic systems has been the object of various studies the past few years. One possible way to increase the power extracted by a photovoltaic panel is the solar tracking, performing its movement in order to follow the sun’s path. One way to activate the tracking system is using an electric induction motor, which should have sufficient torque and low speed, ensuring tracking accuracy. With the use of voltage source inverters and logic devices that generate the appropriate switching is possible to obtain the torque and speed required for the system to operate. This paper proposes the implementation of a angular position sensor and a driver to be applied in solar tracker built at a Power Electronics and Renewable Energies Laboratory, located in UFRN. The speed variation of the motor is performed via a voltage source inverter whose PWM command to actuate their keys will be implemented in an FPGA (Field Programmable Gate Array) device and a TM4C microcontroller. A platform test with an AC induction machine of 1.5 CV was assembled for the comparative testing. The angular position sensor of the panel is implemented in a ATMega328 microcontroller coupled to an accelerometer, commanded by an Arduino prototyping board. The solar position is also calculated by the microcontroller from the geographic coordinates of the site where it was placed, and the local time and date obtained from an RTC (Real-Time Clock) device. A prototype of a solar tracker polar axis moved by a DC motor was assembled to certify the operation of the sensor and to check the tracking efficiency.

Obtenção, caracterização e utilização de um compósito com matriz de resina poliéster e carga de fibras de sisal

The constant search for sustainable alternatives has earned great effort of researchers in research and obtaining new materials, encouraging the rise of eco-friendly productive development and providing simple and practical solutions to economic profitability. In this sense, the use of materials derived from natural renewable sources, vegetables, has great potential applicability to sustainable development. As alternative materials plant fibers can be applied to production of a range of composite materials easing the use of materials derived from non-renewable this thesis were sisal mats used for achieving a composite matrix having as one orthophthalic polyester resin. The webs were subjected to surface treatment in boiling water for 15 minutes. The webs of sisal fibers used were, respectively, 5%, 10% and 15% of the composite weight. The composite was obtained and characterized mechanically and thermally to the chosen formulations. several plates of the composite to obtain the body of evidence for the characterization tests complying with the relevant rules were made. The obtained composites showed strength tensile and bending lower than the array, so it can be used where are required low load requests. The most significant result of the composite studied given to the impact energy absorption, far superior to the matrix used. Other properties were highlighted in oil absorption, and density. It proved the feasibility of obtaining the composite for the three formulations studied C5, C10 and C15 being the most feasible to C10. To demonstrate the feasibility of using composite were made a wall clock, a bench, a chair and a shelf, low mechanical stress structures. It was concluded that the sisal rugs exercised the load function in the composite.

Obtenção, caracterização e utilização de um compósito com matriz de resina poliéster e carga de fibras de sisal

The constant search for sustainable alternatives has earned great effort of researchers in research and obtaining new materials, encouraging the rise of eco-friendly productive development and providing simple and practical solutions to economic profitability. In this sense, the use of materials derived from natural renewable sources, vegetables, has great potential applicability to sustainable development. As alternative materials plant fibers can be applied to production of a range of composite materials easing the use of materials derived from non-renewable this thesis were sisal mats used for achieving a composite matrix having as one orthophthalic polyester resin. The webs were subjected to surface treatment in boiling water for 15 minutes. The webs of sisal fibers used were, respectively, 5%, 10% and 15% of the composite weight. The composite was obtained and characterized mechanically and thermally to the chosen formulations. several plates of the composite to obtain the body of evidence for the characterization tests complying with the relevant rules were made. The obtained composites showed strength tensile and bending lower than the array, so it can be used where are required low load requests. The most significant result of the composite studied given to the impact energy absorption, far superior to the matrix used. Other properties were highlighted in oil absorption, and density. It proved the feasibility of obtaining the composite for the three formulations studied C5, C10 and C15 being the most feasible to C10. To demonstrate the feasibility of using composite were made a wall clock, a bench, a chair and a shelf, low mechanical stress structures. It was concluded that the sisal rugs exercised the load function in the composite.

Documentation of glaciers and mountain chains in the Nordvestfjord of Scorsby Sound (East Greenland, July 2016) by landscape photography during Maria S. Merian cruise MSM56

From the 12th until the 17th of July 2016, research vessel Maria S. Merian entered the Nordvestfjord of Scorsby Sound (East Greenland) as part of research cruise MSM56, "Ecological chemistry in Arctic fjords". A large variety of chemical and biological parameters of fjord and meltwater were measured during this cruise to characterize biogeochemical fluxes in arctic fjords. The photo documentation described here was a side project. It was started when we were close to the Daugaard-Jensen glacier at the end of the Nordvestfjord and realized that not many people have seen this area before and photos available for scientists are probably rare. These pictures shall help to document climate and landscape changes in a remote area of East Greenland. Pictures were taken with a Panasonic Lumix G6 equipped with either a 14-42 or 45-150 objective (zoom factor available in jpg metadata). Polarizer filters were used on both objectives. The time between taking the pictures and writing down the coordinates was maximally one minute but usually shorter. The uncertainty in position is therefore small as we were steaming slowly most of the time the pictures were taken (i.e. below 5 knots). I assume the uncertainty is in most cases below 200 m radius of the noted position. I did not check the direction I directed the camera to with a compass at the beginning. Hence, the direction that was noted is an approximation based on the navigation map and the positioning of the ship. The uncertainty was probably around +/- 40° but initially (pictures 1-17) perhaps even higher as this documentation was a spontaneous idea and it took some time to get the orientation right. It should be easy, however, to find the location of the mountains and glaciers when being on the respective positions because the mountains have a quite characteristic shape. In a later stage of this documentation, I took pictures from the bridge and used the gyros to approximate the direction the camera was pointed at. Here the uncertainty was much lower (i.e. +/- 20° or better). Directions approximated with the help of gyros have degree values in the overview table. The ship data provided in the MSM56 cruise report will contain all kinds of sensor data from Maria S. Merian sensor setup. This data can also be used to further constrain the position the pictures were taken because the exact time a photo was shot is noted in the metadata of the .jpg photo file. The shipboard clock was set on UTC. It was 57 minutes and 45 seconds behind the time in the camera. For example 12:57:45 on the camera was 12:00:00 UTC on the ship. All pictures provided here can be used for scientific purposes. In case of usage in presentations etc. please acknowledge RV Maria S. Merian (MSM56) and Lennart T. Bach as author. Please inform me and ask for reprint permission in case you want to use the pictures for scientific publications. I would like to thank all participants and the crew of Maria S. Merian Cruise 56 (MSM56, Ecological chemistry in Arctic fjords).

As escolas polivalentes do Triângulo Mineiro e Alto Paranaíba (MG): sondagem vocacional no projeto desenvolvimentista civil-militar (1965–1976)

This study has as object eight state vocational schools located in Araguari, Araxá, Frutal, Ituiutaba, Monte Carmelo, Patos de Minas, Uberaba and Uberlândia, in Minas Gerais. The period analyzed comprises the years from 1965 to 1976, from the signature of the Agreement 512-11-610-042 beteween the Ministry of Education and Culture (MEC) and the American Agency for International Development (USAID), which started a series of other agreements, and actions ending up with the creation of the Expansion and Improvement of High Schools Program (Programa de Expansão e Melhoria do Ensino Médio - PREMEM) and, from this, the Vocational Schools. The upper limit of the study, 1976, was the year when these agreements, known as MEC/USAID agreements ceased. The Vocational Schools were characterized as vocation probing schools, directing the professional formation of the population in general, which would happen a posteriori, turning it shorter and more effective, since the labor market would demand, urgently, capable professionals for an expanding economy. The project of Vocational Schools had a national scope, and foresaw, for its unfolding, the complete substitution of State Schools for the new model, called “multi-curricula”. The theme Vocational schools was the object of my Master’s degree study, when I focused the State School Guiomar de Freitas Costa, in Uberlândia. That study raised questionings and concerns that resulted in the central problem of the thesis presented here: understanding the measure in which such schools integrated the country’s development project – mostly in the first half of the military rule – and to understand its structure, functionality and efficacyThe development of the study presented here, demanded the use of several sources: 1) specialized literature about the topics presented, i.e., the situation of national education in a temporal analysis, the political, economical and social context, research methodologies, the theory of human capital, vocational teaching, pedagogical trends and practices, agreements MEC-USAID and PREMEM; 2) national, state and county laws related to the discussion: laws of national education directives and basis, decrees and reports stating about the program of technical cooperation between Brazil and the United States of America, the Program of Expansion and Improvement of Teaching (PREMEM), formation of professors, establishment of Vocational Schools and educational planning; 3) documentation of school archives: books of minutes of Collegiate and of faculty and staff, registrar books with final scores, enrolment, visits of inspector, accounting books, punch clock records, student, professor and staff occurrences, inventory, class schedules, school year calendar, school rules, class reports, payment rolls, bills of sales, exchanged mail, personal documentation of professional personnel, documents of land acquisition, blueprints, manuals of PREMEM, didactic materials/resources used in classes, books available in the school library, structured evaluations for follow-up of school processes, pictures of events, texts prepared for special dates, and news from the official newspaper and, finally, 4) national and local press reports, especially from Folha de São Paulo, Correio de Araxá, Correio de Uberlândia and Lavoura e Comércio (Uberaba). The proposition of Vocational schools was conciliate theoretical and practical formation through an active education permeated by technological resources. The contact with knowledge and several practical activities under professional supervision, the student would identify the knowledge area that would interest him the most and his aptitude. This formation in primary school would make way for the vocation studies in high school, which became mandatory by the law 5.692/71, that reformed school education from the previous levels of elementary, middle high and high school. However, the multi-curricula proposal that would be spread to the other public schools in the country ended up succumbing to the model already established. From its ephemeral existence, maybe the Vocational Schools have not reached the more general goals in political, economic and social aspects; however, this study demonstrated that, for the people that, directly or indirectly, had contact with such schools, a legacy of vocational and quality teaching was made, so much so, that forty years after the end of that proposal, they are still remembered.