Dynamics of cork mycobiota throughout stopper manufacturing process: from diversity to metabolite

Dissertation presented to obtain the Ph.D degree in Biology

Melhoria energética do sector de soda leve conforme a nova metodologia manufacturing excellence solvay Portugal

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Differences in ERP use and value across Iberian Manufacturing and Services SMEs

Enterprise Resource Planning (ERP) system literature reports very little research on post-adoption stages, that is, actual usage and value. Even fewer studies focus on the specificities of an industry analysis. Based on the Technology-Organizational-Environment (TOE) framework and the Resource-Based View (RBV) theory, we develop a research model to measure and examine determinants of ERP use and value and their impact in the Iberian region (Portugal and Spain) across Manufacturing and Services industries in Small and Medium Enterprises (SMEs). The empirical test was conducted through structural equation modelling, using data from 261 firms in the peninsula in the Manufacturing and Service industries. Results show that amongst ERP use determinants, Training is the most important determinant for Service firms and Compatibility for Manufacturing firms. Firm size, Analytics, and Collaboration contribute to ERP Value in both industries, with Analytics being more important for the Service industry. The paper provides insight into which determinants contribute to ERP use and ERP value in Iberian Manufacturing and Services SMEs, offering managerial and academic implications.

Mortality among 24,865 workers exposed to polychlorinated biphenyls (PCBs) in three electrical capacitor manufacturing plants: a ten-year update.

The objective of this analysis was to evaluate mortality among a cohort of 24,865 capacitor-manufacturing workers exposed to polychlorinated biphenyls (PCBs) at plants in Indiana, Massachusetts, and New York and followed for mortality through 2008. Cumulative PCB exposure was estimated using plant-specific job-exposure matrices. External comparisons to US and state-specific populations used standardized mortality ratios, adjusted for gender, race, age and calendar year. Among long-term workers employed 3 months or longer, within-cohort comparisons used standardized rate ratios and multivariable Poisson regression modeling. Through 2008, more than one million person-years at risk and 8749 deaths were accrued. Among long-term employees, all-cause and all-cancer mortality were not elevated; of the a priori outcomes assessed only melanoma mortality was elevated. Mortality was elevated for some outcomes of a priori interest among subgroups of long-term workers: all cancer, intestinal cancer and amyotrophic lateral sclerosis (women); melanoma (men); melanoma and brain and nervous system cancer (Indiana plant); and melanoma and multiple myeloma (New York plant). Standardized rates of stomach and uterine cancer and multiple myeloma mortality increased with estimated cumulative PCB exposure. Poisson regression modeling showed significant associations with estimated cumulative PCB exposure for prostate and stomach cancer mortality. For other outcomes of a priori interest--rectal, liver, ovarian, breast, and thyroid cancer, non-Hodgkin lymphoma, Alzheimer disease, and Parkinson disease--neither elevated mortality nor positive associations with PCB exposure were observed. Associations between estimated cumulative PCB exposure and stomach, uterine, and prostate cancer and myeloma mortality confirmed our previous positive findings.

Developing sustainable value proposition: A case study from manufacturing industry

Increasing pressures to reduce costs, inprove productivity, and lower the environmental impact are forcing suppliers to present evidences of the monetary and societal value they create for the customers and society around. The extant academic literature on the practical activities related to topic is still sparse and this study addresses the gap by developing sustainable customer value proposition for Valmet’s recycled fibre line solution for the Chinese market. The research is based on literature review and single case study method. Theoretically the study is connected to the emerging literature of customer value and life cycle engineering, and to the research of sustainable development in the field of marketing. For exloiting empirical evidences, in-depth supplier interviews and customer survey were conducted. The results suggest that selling of recycled fibre line solution requires tangible and credible evidence of the value and utility which is delivered for the customer. In addition to the economic benefits also societal benefits should be included in the value proposition that are the focus of attention in China. Still, the role of discovered benefits may be contradictory until they are communicated to appropriate decision makers. Managerially the study contributes to the customer value management and quantification knowledge and practices in Valmet’s organization.

Anaerobic performance in ice hockey : the effect of skate blade radius of hollow

The purpose of the study was to investigate the effect of skate blade radius of hollow (ROH) on anaerobic performance, specifically during the acceleration and stopping phases of an on-ice skating test. Fifteen, male Junior B hockey players (mean age 19 y ± 1.46) were recruited to participate. On-icc testing required each participant to complete an on-ice anaerobic performance test [Reed Repeat Skate (RRS)) on three separate days. During each on-ice test, the participant's skate blades were sharpened to one of three, randomly assigned, ROH values (0.63 cm, 1.27 cm, 1.90 cm). Performance times were recorded during each RRS and used to calculate anaerobic variables [anaerobic power (W), anaerobic capacity (W), and fatigue index (s, %)). Each RRS was video recorded for the purpose of motion analysis. Video footage was imported into Peak Motus™ to measure kinematic variables of the acceleration and stopping phases. The specific variables calculated from the acceleration phase were: average velocity over 6 m (m/s), average stride length (m), and mean stride rate (strides/s). The specific variables calculated from the stopping phase were: velocity at initiation of stopping (rn/s), stopping distance (m), stopping time (s). A repeated measures ANOV A was used to assess differences in mean performance and kinematic variables across the three selected hollows. Further analysis was conducted to assess differences in trial by trial performance and kinematic variables for all hollows. The primary findings of the study suggested that skate blade ROH can have a significant effect on kinematic variables, namely stride length and stride rate during the acceleration phase and stopping distance and stopping time during the stopping phase of an on-ice anaerobic performance test. During the acceleration phase, no significant difdifferences were found in SR and SL across the three selected hollows. Mean SR on the 1.27 cm hollow was significantly slower than both the 0.63 cm and 1.90 cm hollows and SL was significantly longer when skating on the 1.27 cm hollow in comparison to the 1.90 cm hollow. During the stopping phase, stopping distance on the 0.63 cm hollow (4.12 m ± 0.14) was significantly shorter than both the 1.27 cm hollow (4.43 m ± 0.08) (p < 0.05) and the 1.90 cm ho])ow (4.35 m ± 0.12) (p < 0.05). Mean ST was also significantly shorter when stopping on the 0.63 cm hollow then both the 1.27 cm and 1.90 cm hollows. Trial by trial results clearly illustrated the affect of fatigue on kinematic variables; AV, SR, IV decreased from trial 1 to 6. There was no significant effect on anaerobic performance variables during the RRS. Altering the skate blade ROH has a significant and practical affect on accelerating and stopping performance will be discussed in this paper.

A. S. Whiting Manufacturing Company Limited, minute book, 1872-1909.

The Cedar Dale Scythe Works was the second manufacturing company that A.S. Whiting had established in Oshawa, the first being the Oshawa Manufacturing Co. in 1852. The Oshawa Manufacturing Co. was eventually taken over by the Joseph Hall Works in 1857. In 1862, the Cedar Dale Works was built after being in a rented space in the Hall Works for two years, building scythes and hoes. With the building of the firm, the village of Cedar Dale was established. In 1867, the firm became Whiting and Cowan when John Cowan bought into the company. After the death of Whiting in 1867, his son-in-law, R.S. Hamlin headed the company. By 1872, it became the A.S. Whiting Manufacturing Co. when Cowan withdrew from the business. Before Whiting’s death, the company had been profitable but due to new machinery being developed, hand tools were becoming obsolete and the business only lasted for a few more years (source: Oshawa Community Museum and Archives Web site).

Manufacturing 'authenticity' : a case study of the Niagara wine cluster

In this thesis, I use "Fabricating Authenticity," a model developed in the Production of Culture Perspective, to explore the evolving criteria for judging what constitute "real" and authentic Niagara wines, along with the naturalization of these criteria, as the Canadian Niagara wine cluster has come under increasing stress from globalization. Authenticity has been identified as a hallmark of contemporary marketing and important to cultural industries, which can use it for creating meaningful differentiation; making it a renewable resource for securing consumers, increasing market value; and for relationships with key brokers. This is important as free trade and international treaties are making traditional protective barriers, like trade tariffs and markups, obsolete and as governments increasingly allocate industry support via promotion and marketing policies that are directly linked to objectives of city and regional development, which in turn carry real implications for what gets to be judged authentic and inauthentic local culture. This research uses a mixed methods research strategy, drawing upon ethnographic observation, marketing materials, newspaper reports, and secondary data to provide insight into the processes and conflicts over efforts to fabricate authenticity, comparing the periods before and after the passage of NAFT A to the present period. The Niagara wine cluster is a good case in point because it has little natural advantage nor was there a tradition of quality table wine making to facilitate the naturalization of authenticity. Geographic industrial clusters have been found particularly competitive in the global economy and the exploratory case study contributes to our understanding of the dynamic of '1abricating authenticity," building on various theoretical propositions to attempt to derive explanations of how global processes affect strategies to create "authenticity," how these strategies affect cultural homogeneity and heterogeneity at the local level, and how the concept of "cluster" contributes to the process of managing authenticity.

O.S. Rixford Manufacturing Company corporate stock book, 1883-1898.

Around 1837, Luther Rixford founded a tool manufacturing business (originally known as the Luther Rixford Manufacturing Co.) in East Highgate, Vermont, that specialized in manufacturing scythes and other agricultural tools. A branch of this business was established in Upper Bedford, Quebec, around the late 1840's. Subsequent generations of the Rixford family took over the operations of both facilities, and in 1857 Oscar S. Rixford renamed the company the O.S. Rixford Manufacturing Co. The company was incorporated in 1883. Around 1920, the O.S. Rixford Manufacturing Company (of Canada) was acquired by Welland Vale Manufacturing, in St. Catharines, Ontario. The Rixford Company in Vermont continued operations until 1956, when decreasing demand for the tools they manufactured caused them to close their doors.

The Effect of Skate Blade Radius of Contour and Radius of Hollow on Skating Performance in Male Ice Hockey Players

The primary purpose of this study was to investigate the effect of skate blade shape on skating performance. A secondary purpose was to evaluate if a change in hollow shape can create additional effects on skating performance. Thirty-seven male ice hockey players (age=18 years, SD=3.4) participated. The intervention consisted of four sharpening trials assessed using three on-ice tests. Participant feedback was also assessed using a Likert scale questionnaire. Statistical analysis included within-subject repeated measures MANOVA of trial by skating variables (p≤0.05). Results revealed Contour 1 enhanced performance compared to baseline on six variables at varsity level and five variables at midget level. Contour 1 enhanced performance compared to Contour 2 on six variables at the varsity and midget levels. Contour 1 also scored highest on the feedback questionnaire. Findings of this study indicate that contouring is a necessary practice to achieve optimal skating performance.

Letters Patent Incorporating The Ontario Grape Growing and Wine Manufacturing Company

The patent incorporates the Ontario Grape Growing and Wine Manufacturing Company for the purpose "for the manufacture of wine within the province of Ontario" and is recorded as no. 85 on June 9, 1873.

Certificate for Five Shares of Common Stock in Lincoln Manufacturing Company Limited

Certificate for 5 shares of common stock in Lincoln Manufacturing Company Limited to Hamilton K. Woodruff, April 10, 1923.