Naudanlanta biokaasulaitosraaka-aineena, käsittely ja logistiikka

Maatalouden lietelannasta saatavien ravinteiden talteenotto ja kierrätys ovat viime aikoina nousseet yhä tärkeämmäksi tavoitteeksi. Ravinteiden tehokas kierrätystapa saadaan ai-kaiseksi käsittelemällä lietelantaa. Lannan käsittelyketjuja on monenlaisia; tässä työssä naudan lannan käsittelyketju muodostuu separoinnista ja mädätyksestä. Tämän diplomityön tarkoituksena oli selvittää naudan lannan mekaanisen separoinnin ja logistiikan kannattavuus märkämädätys- ja kuivamädätyskäsittelyketjussa. Käsittelyketju-jen kannattavuus tai kannattamattomuus on esitetty eri skenaarioissa muodostettujen kus-tannuslaskentojen perusteella. Skenaarioiden kustannuslaskelmat ovat toisiinsa verratta-vissa, jolloin ne voidaan asettaa niin ikään paremmuusjärjestykseen. Viides skenaario ei ole suoraan verrattavissa muihin skenaarioihin, koska siinä lannankäsittelyketjua on tar-kasteltu eri näkökulmasta, keskittämällä suurimmalle maatilalle. Mekaanisista separaattoreista tarkasteltiin työssä ruuvipuristinta, dekantterilinkoa ja ul-koistettua separointipalvelua. Lannan logistiikkakustannuksissa huomioitiin lannan kulje-tusta traktori- ja säiliöautolla tai traktorilla. Separoinnin kustannus liitettiin osaksi logis-tiikkakustannusta. Työn tuloksien perusteella voidaan todeta dekantterilingon separointi-kustannuksen olevan taloudellisesti kannattamattomin johtuen pienestä lantakapasiteetista ja separaattorin korkeasta investointihinnasta. Ravinteiden osalta linko osoittautui tehok-kaimmaksi menetelmäksi erottamaan ravinteet eri jakeisiin. Lannan käsittely separointipalvelulla oli edullisin skenaario, jonka vuosittaiseksi kustan-nukseksi saatiin säiliö- ja kuorma-autolla lantaa kuljetettaessa 58 700 € ja traktorilla kul-jetettaessa 60 400 €. Kallein lannan käsittely oli dekantterilingolla, jonka vuosittaiseksi kustannukseksi saatiin lantaa säiliö- ja kuorma-autolla kuljetettaessa 121 000 € ja trakto-rilla kuljetettaessa 123 300 €. Lannan separointi maatilalla osoittautui kannattavammaksi kuin käsittelemättömän lietteen kuljetus biokaasulaitokselle.

Review of water electrolysis technologies and design of renewable hydrogen production systems

An electric system based on renewable energy faces challenges concerning the storage and utilization of energy due to the intermittent and seasonal nature of renewable energy sources. Wind and solar photovoltaic power productions are variable and difficult to predict, and thus electricity storage will be needed in the case of basic power production. Hydrogen’s energetic potential lies in its ability and versatility to store chemical energy, to serve as an energy carrier and as feedstock for various industries. Hydrogen is also used e.g. in the production of biofuels. The amount of energy produced during hydrogen combustion is higher than any other fuel’s on a mass basis with a higher-heating-value of 39.4 kWh/kg. However, even though hydrogen is the most abundant element in the universe, on Earth most hydrogen exists in molecular forms such as water. Therefore, hydrogen must be produced and there are various methods to do so. Today, the majority hydrogen comes from fossil fuels, mainly from steam methane reforming, and only about 4 % of global hydrogen comes from water electrolysis. Combination of electrolytic production of hydrogen from water and supply of renewable energy is attracting more interest due to the sustainability and the increased flexibility of the resulting energy system. The preferred option for intermittent hydrogen storage is pressurization in tanks since at ambient conditions the volumetric energy density of hydrogen is low, and pressurized tanks are efficient and affordable when the cycling rate is high. Pressurized hydrogen enables energy storage in larger capacities compared to battery technologies and additionally the energy can be stored for longer periods of time, on a time scale of months. In this thesis, the thermodynamics and electrochemistry associated with water electrolysis are described. The main water electrolysis technologies are presented with state-of-the-art specifications. Finally, a Power-to-Hydrogen infrastructure design for Lappeenranta University of Technology is presented. Laboratory setup for water electrolysis is specified and factors affecting its commissioning in Finland are presented.

Biomass Utilization in PFC Co-firing System with the Slagging and Fouling Analysis

Master’s thesis Biomass Utilization in PFC Co-firing System with the Slagging and Fouling Analysis is the study of the modern technologies of different coal-firing systems: PFC system, FB system and GF system. The biomass co-fired with coal is represented by the research of the company Alstom Power Plant. Based on the back ground of the air pollution, greenhouse effect problems and the national fuel security today, the bioenergy utilization is more and more popular. However, the biomass is promoted to burn to decrease the emission amount of carbon dioxide and other air pollutions, new problems form like slagging and fouling, hot corrosion in the firing systems. Thesis represent the brief overview of different coal-firing systems utilized in the world, and focus on the biomass-coal co-firing in the PFC system. The biomass supply and how the PFC system is running are represented in the thesis. Additionally, the new problems of hot corrosion, slagging and fouling are mentioned. The slagging and fouling problem is simulated by using the software HSC Chemistry 6.1, and the emissions comparison between coal-firing and co-firing are simulated as well.

Ilmastonmuutosteknologiat maailman patenttijärjestelmissä: Case autoteollisuus

Tässä työssä tarkastellaan kahden kansainvälisen patenttiluokitusjärjestelmän vihreiden teknologioiden luokitusjärjestelmiä autoteollisuudessa. Työn tarkoitus on tutkia, kuinka paljon vihreän teknologian patenttianalyysin tulokset eroavat toisistaan, jos tutkimuksissa käytetään eri patenttien luokitusjärjestelmiä. Vanhempi järjestelmä, International Patent Classification, on asemansa vakiinnuttanut kansainvälinen patenttienluokitusjärjestelmä. Vasta viime vuosina käyttöön otettu Cooperative Patent Classification on Euroopan ja Yhdysvaltojen patenttijärjestöjen kehittämä patenttien luokitusjärjestelmä. Tutkimusmenetelmissä hyödynnetään patenttianalyysia ja joukko-oppia. Tutkimuksessa vihreiden teknologioiden luokittelumenetelmien vertailukohteille saatiin määrällisesti samankaltaiset tulokset, mutta niiden sisältämät patentit eivät olleet pääsäännöllisesti samoja. Työssä tarkastellaan myös Toyotan, Daimlerin ja Fordin vihreiden autoteknologiapolkujen kehitystä. Varsinkin Toyota ja Daimler tulevat yhä enemmän panostamaan sähkö- ja hybridiautoihin verrattuna polttomoottoriautoihin.

Integrated energy storage tank for large scale power-to-gas applications

The global interest towards renewable energy production such as wind and solar energy is increasing, which in turn calls for new energy storage concepts due to the larger share of intermittent energy production. Power-to-gas solutions can be utilized to convert surplus electricity to chemical energy which can be stored for extended periods of time. The energy storage concept explored in this thesis is an integrated energy storage tank connected to an oxy-fuel combustion plant. Using this approach, flue gases from the plant could be fed directly into the storage tank and later converted into synthetic natural gas by utilizing electrolysis-methanation route. This work utilizes computational fluid dynamics to model the desublimation of carbon dioxide inside a storage tank containing cryogenic liquid, such as liquefied natural gas. Numerical modelling enables the evaluation of the transient flow patterns caused by the desublimation, as well as general fluid behaviour inside the tank. Based on simulations the stability of the cryogenic storage and the magnitude of the key parameters can be evaluated.

Maakaasupolttimen säätöjärjestelmän kehittäminen

Jatkuvasti kiristyvät päästörajoitukset pakottavat teollisuuden kehittämään uusia ratkaisuja päästöjen vähentämiseksi. Hiilimonoksidin ja typen oksidien päästörajoitukset ovat erityi-sen tiukat esimerkiksi Kiinassa ja Yhdysvalloissa. Maakaasun ja ilman epätäydellisessä pa-lamisessa muodostuu hiilimonoksidia ja typen oksideja. Käytännön sovelluksissa palaminen on lähes aina epätäydellistä polttoaineen ja ilman epätäydellisen sekoittumisen takia, joten palamisreaktiossa muodostuva savukaasu sisältää edellä mainittuja haitallisia komponentteja lähes poikkeuksetta. Savukaasua voidaan puhdistaa erilaisilla menetelmillä ennen sen pää-tymistä ympäristöön. Tässä diplomityössä esitellään maakaasupoltinjärjestelmän keskeiset komponentit ja aihee-seen liittyvät tarpeelliset käsitteet sekä suunnitellaan polttoaine-ilma-seossuhdesäätö eräälle maakaasupoltinjärjestelmälle. Säädön ensisijaisena tavoitteena on pitää seossuhde mahdolli-simman tarkasti halutussa arvossa savukaasun puhdistuksen kannalta. Lisäksi säädön on tarkoitus taata mahdollisimman hyvä suorituskyky transienttitilanteissa. Järjestelmän eri osien toiminta mallinnetaan ja analysoidaan. Mallinnuksen perusteella suunnitellaan ja simu-loidaan säätöjärjestelmä. Suunniteltu säätöjärjestelmä toteutetaan osaksi polttolaitoksen automaatiojärjestelmää. Mittaustulokset osoittavat, että päästöjen kannalta säätö pitää seossuhteen riittävän tarkasti halutussa arvossa: hiilimonoksidin ja typen oksidien päästöt ovat asetettujen rajojen sisällä. Testiajojen perusteella prosessi on kuitenkin erittäin häiriöinen ja transienttitilanteissa ei saavuteta simulointien mukaista suorituskykyä.

Three-dimensional modeling of biomass fuel flow in a circulating fluidized bed furnace

The reduction of greenhouse gas emissions in the European Union promotes the combustion of biomass rather than fossil fuels in energy production. Circulating fluidized bed (CFB) combustion offers a simple, flexible and efficient way to utilize untreated biomass in a large scale. CFB furnaces are modeled in order to understand their operation better and to help in the design of new furnaces. Therefore, physically accurate models are needed to describe the heavily coupled multiphase flow, reactions and heat transfer inside the furnace. This thesis presents a new model for the fuel flow inside the CFB furnace, which acknowledges the physical properties of the fuel and the multiphase flow phenomena inside the furnace. This model is applied with special interest in the firing of untreated biomass. An experimental method is utilized to characterize gas-fuel drag force relations. This characteristic drag force approach is developed into a gas-fuel drag force model suitable for irregular, non-spherical biomass particles and applied together with the new fuel flow model in the modeling of a large-scale CFB furnace. The model results are physically valid and achieve very good correspondence with the measurement results from large-scale CFB furnace firing biomass. With the methods and models presented in this work, the fuel flow field inside a circulating fluidized bed furnace can be modeled with better accuracy and more efficiently than in previous studies with a three-dimensional holistic model frame.

Cassava wastewater (manipueira) treatment using a two-phase anaerobic biodigestor

A two-phase anaerobic biodigestor was employed in order to analyze methane production with different manipueira organic loading rates. The acidogenic phase was carried out in a batch process whereas the methanogenic in an up-flow anaerobic fixed bed reactor with continuous feeding. The organic loading rates varied from 0.33 up to 8.48g of Chemical Demand Oxygen (COD)/L.day. The highest content of methane, 80.9%, was obtained with organic loading rate of 0.33g and the lowest, 56.8%, with 8.48gCOD/L.d. The highest reduction of COD, 88.89%, was obtained with organic loading rate of 2.25g and the lowest, 54.95%, with 8.48gCOD/L.d. From these data it was possible to realize that anaerobic biodigestion can be managed in at least two ways, i.e., for energy production (methane) or for organic loading reduction. The organic loading rate should be calculated as part of the purpose of the treatment to be accomplished.

Carbon sources for Power-to-Gas applications in the Finnish energy system

This thesis is done as a part of the NEOCARBON project. The aim of NEOCARBON project is to study a fully renewable energy system utilizing Power-to-Gas or Power-to-Liquid technology for energy storage. Power-to-Gas consists of two main operations: Hydrogen production via electrolysis and methane production via methanation. Methanation requires carbon dioxide and hydrogen as a raw material. This thesis studies the potential carbon dioxide sources within Finland. The different sources are ranked using the cost and energy penalty of the carbon capture, carbon biogenity and compatibility with Power-to-Gas. It can be concluded that in Finland there exists enough CO2 point sources to provide national PtG system with sufficient amounts of carbon. Pulp and paper industry is single largest producer of biogenic CO2 in Finland. It is possible to obtain single unit capable of grid balancing operations and energy transformations via Power-to-Gas and Gas-to-Power by coupling biogas plants with biomethanation and CHP units.

Economics of Power-to-Gas integration to wastewater treatment plant

Solar and wind power produce electricity irregularly. This irregular power production is problematic and therefore production can exceed the need. Thus sufficient energy storage solutions are needed. Currently there are some storages, such as flywheel, but they are quite short-term. Power-to-Gas (P2G) offers a solution to store energy as a synthetic natural gas. It also improves nation’s energy self-sufficiency. Power-to-Gas can be integrated to an industrial or a municipal facility to reduce production costs. In this master’s thesis the integration of Power-to-Gas technologies to wastewater treatment as a part of the VTT’s Neo-Carbon Energy project is studied. Power-to-Gas produces synthetic methane (SNG) from water and carbon dioxide with electricity. This SNG can be considered as stored energy. Basic wastewater treatment technologies and the production of biogas in the treatment plant are studied. The utilisation of biogas and SNG in heat and power production and in transportation is also studied. The integration of the P2G to wastewater treatment plant (WWTP) is examined mainly from economic view. First the mass flows of flowing materials are calculated and after that the economic impact based on the mass flows. The economic efficiency is evaluated with Net Present Value method. In this thesis it is also studied the overall profitability of the integration and the key economic factors.

Characterization of biomasses from the north and northeast regions of Brazil for processes in biorefineries

Abstract In search for renewable energy sources, the Brazilian residual biomasses stand out due to their favorable physical and chemical properties, low cost, and their being less pollutant. Therefore, they are likely to be used in biorefineries in the production of chemical inputs to substitute fossil fuels. This substitution is possible due to the high contents of carbohydrates (>40%), low contents of extractives (<20%), ashes (<8%) and moisture (<8%) found in these residual biomasses. High calorific values of all residues also offer them the chance to be used in combustion. A principal components analysis (PCA) was performed for better understanding of the samples and their hysic-chemical properties. Thus, this study aimed to characterize biomasses from the north (babassu residues, such as mesocarp and endocarp; pequi and Brazil nut) and northeast (agave and coconut) regions of Brazil, in order to contribute to the preservation of the environment and strengthen the economy of the region.

Biomassakattilan simulointi

Tässä diplomityössä mallinnetaan Apros-simulointiohjelmistolla kylläistä höyryä tuottava KPA Uniconin toimittama Biograte-kattilalaitos. Työ on rajattu käsittelemään vesihöyrypiiri syöttövesisäiliöstä prosessiin lähtevään höyryyn saakka. Savukaasupuoli on mallinnettu polttoaineen ja palamisilman syötöstä savupiippuun asti, mutta savukaasujen puhdistus on jätetty pois simulaatiomallista. Työssä kerrotaan yleisesti biopolttoaineista, kattilalaitoksista ja tulipesäratkaisuista. Simuloitava kattilalaitos ja sen säätöjärjestelmä käydään läpi yksityiskohtaisemmin. Simuloinnista ja sen mahdollisuuksista kerrotaan yleisesti, jonka jälkeen esitellään tehty simulaatiomalli. Simulointituloksia verrataan kattilan mitoitusarvoihin ja tärkeimpien prosessisuureiden muutoksia tutkitaan kuormanmuutostilanteissa. Lopuksi tuloksista tehdään yhteenveto ja esitellään jatkotoimenpidesuunnitelmat. Simuloitu kattilalaitos tuottaa kylläistä höyryä halutun määrän oikeassa paineessa ja lämpötilassa. Kattilan prosessisuureet vastaavat melko hyvin mitoitusarvoja ja simulaatiomalli toimii vakaasti myös kuormanmuutostilanteissa. Suurimmat kompromissit ja yksinkertaistukset on tehty tulipesän ja polttoaineensyötön mallinnuksessa. Näitä osa-alueita kehittämällä simulaation tarkkuutta olisi mahdollista parantaa entisestään. Jatkossa simulointimallia on tarkoitus kehittää laajentamalla se kattamaan myös laitoksen sekundääripuoli kokonaisuudessaan. Tulosten perusteella simulaatiota voidaan pitää onnistuneena mallina Biograte-kattilalaitoksesta.

The role of nuclear and other conventional power plants in the flexible energy system

This thesis reviews the role of nuclear and conventional power plants in the future energy system. The review is done by utilizing freely accesible publications in addition to generating load duration and ramping curves for Nordic energy system. As the aim of the future energy system is to reduce GHG-emissions and avoid further global warming, the need for flexible power generation increases with the increased share of intermittent renewables. The goal of this thesis is to offer extensive understanding of possibilities and restrictions that nuclear power and conventional power plants have regarding flexible and sustainable generation. As a conclusion, nuclear power is the only technology that is able to provide large scale GHG-free power output variations with good ramping values. Most of the currently operating plants are able to take part in load following as the requirement to do so is already required to be included in the plant design. Load duration and ramping curves produced prove that nuclear power is able to cover most of the annual generation variation and ramping needs in the Nordic energy system. From the conventional power generation methods, only biomass combustion can be considered GHG-free because biomass is considered carbon neutral. CFB combusted biomass has good load follow capabilities in good ramping and turndown ratios. All the other conventional power generation technologies generate GHG-emissions and therefore the use of these technologies should be reduced.

Thermal modelling of commercial lithium-ion batteries

The accelerating adoption of electrical technologies in vehicles over the recent years has led to an increase in the research on electrochemical energy storage systems, which are among the key elements in these technologies. The application of electrochemical energy storage systems for instance in hybrid electrical vehicles (HEVs) or hybrid mobile working machines allows tolerating high power peaks, leading to an opportunity to downsize the internal combustion engine and reduce fuel consumption, and therefore, CO2 and other emissions. Further, the application of electrochemical energy storage systems provides an option of kinetic and potential energy recuperation. Presently, the lithium-ion (Li-ion) battery is considered the most suitable electrochemical energy storage type in HEVs and hybrid mobile working machines. However, the intensive operating cycle produces high heat losses in the Li-ion battery, which increase its operating temperature. The Li-ion battery operation at high temperatures accelerates the ageing of the battery, and in the worst case, may lead to a thermal runaway and fire. Therefore, an appropriate Li-ion battery cooling system should be provided for the temperature control in applications such as HEVs and mobile working machines. In this doctoral dissertation, methods are presented to set up a thermal model of a single Li-ion cell and a more complex battery module, which can be used if full information about the battery chemistry is not available. In addition, a non-destructive method is developed for the cell thermal characterization, which allows to measure the thermal parameters at different states of charge and in different points of cell surface. The proposed models and the cell thermal characterization method have been verified by experimental measurements. The minimization of high thermal non-uniformity, which was detected in the pouch cell during its operation with a high C-rate current, was analysed by applying a simplified pouch cell 3D thermal model. In the analysis, heat pipes were incorporated into the pouch cell cooling system, and an optimization algorithm was generated for the estimation of the optimalplacement of heat pipes in the pouch cell cooling system. An analysis of the application of heat pipes to the pouch cell cooling system shows that heat pipes significantly decrease the temperature non-uniformity on the cell surface, and therefore, heat pipes were recommended for the enhancement of the pouch cell cooling system.

Chemical changes in biomass during torrefaction

Torrefaction is moderate thermal treatment (~200-300 °C) of biomass in an inert atmosphere. The torrefied fuel offers advantages to traditional biomass, such as higher heating value, reduced hydrophilic nature, increased its resistance to biological decay, and improved grindability. These factors could, for instance, lead to better handling and storage of biomass and increased use of biomass in pulverized combustors. In this work, we look at several aspects of changes in the biomass during torrefaction. We investigate the fate of carboxylic groups during torrefaction and its dependency to equilibrium moisture content. The changes in the wood components including carbohydrates, lignin, extractable materials and ashforming matters are also studied. And at last, the effect of K on torrefaction is investigated and then modeled. In biomass, carboxylic sites are partially responsible for its hydrophilic characteristic. These sites are degraded to varying extents during torrefaction. In this work, methylene blue sorption and potentiometric titration were applied to measure the concentration of carboxylic groups in torrefied spruce wood. The results from both methods were applicable and the values agreed well. A decrease in the equilibrium moisture content at different humidity was also measured for the torrefied wood samples, which is in good agreement with the decrease in carboxylic group contents. Thus, both methods offer a means of directly measuring the decomposition of carboxylic groups in biomass during torrefaction as a valuable parameter in evaluating the extent of torrefaction. This provides new information to the chemical changes occurring during torrefaction. The effect of torrefaction temperature on the chemistry of birch wood was investigated. The samples were from a pilot plant at Energy research Center of the Netherlands (ECN). And in that way they were representative of industrially produced samples. Sugar analysis was applied to analyze the hemicellulose and cellulose content during torrefaction. The results show a significant degradation of hemicellulose already at 240 °C, while cellulose degradation becomes significant above 270 °C torrefaction. Several methods including Klason lignin method, solid state NMR and Py-GC-MS analyses were applied to measure the changes in lignin during torrefaction. The changes in the ratio of phenyl, guaiacyl and syringyl units show that lignin degrades already at 240 °C to a small extent. To investigate the changes in the extractives from acetone extraction during torrefaction, gravimetric method, HP-SEC and GC-FID followed by GC-MS analysis were performed. The content of acetone-extractable material increases already at 240 °C torrefaction through the degradation of carbohydrate and lignin. The molecular weight of the acetone-extractable material decreases with increasing the torrefaction temperature. The formation of some valuable materials like syringaresinol or vanillin is also observed which is important from biorefinery perspective. To investigate the change in the chemical association of ash-forming elements in birch wood during torrefaction, chemical fractionation was performed on the original and torrefied birch samples. These results give a first understanding of the changes in the association of ashforming elements during torrefaction. The most significant changes can be seen in the distribution of calcium, magnesium and manganese, with some change in water solubility seen in potassium. These changes may in part be due to the destruction of carboxylic groups. In addition to some changes in water and acid solubility of phosphorous, a clear decrease in the concentration of both chlorine and sulfur was observed. This would be a significant additional benefit for the combustion of torrefied biomass. Another objective of this work is studying the impact of organically bound K, Na, Ca and Mn on mass loss of biomass during torrefaction. These elements were of interest because they have been shown to be catalytically active in solid fuels during pyrolysis and/or gasification. The biomasses were first acid washed to remove the ash-forming matters and then organic sites were doped with K, Na, Ca or Mn. The results show that K and Na bound to organic sites can significantly increase the mass loss during torrefaction. It is also seen that Mn bound to organic sites increases the mass loss and Ca addition does not influence the mass loss rate on torrefaction. This increase in mass loss during torrefaction with alkali addition is unlike what has been found in the case of pyrolysis where alkali addition resulted in a reduced mass loss. These results are important for the future operation of torrefaction plants, which will likely be designed to handle various biomasses with significantly different contents of K. The results imply that shorter retention times are possible for high K-containing biomasses. The mass loss of spruce wood with different content of K was modeled using a two-step reaction model based on four kinetic rate constants. The results show that it is possible to model the mass loss of spruce wood doped with different levels of K using the same activation energies but different pre-exponential factors for the rate constants. Three of the pre-exponential factors increased linearly with increasing K content, while one of the preexponential factors decreased with increasing K content. Therefore, a new torrefaction model was formulated using the hemicellulose and cellulose content and K content. The new torrefaction model was validated against the mass loss during the torrefaction of aspen, miscanthus, straw and bark. There is good agreement between the model and the experimental data for the other biomasses, except bark. For bark, the mass loss of acetone extractable material is also needed to be taken into account. The new model can describe the kinetics of mass loss during torrefaction of different types of biomass. This is important for considering fuel flexibility in torrefaction plants.