Oral health-related quality of life and satisfaction before and after treatment with complete dentures in a Dental School in Brazil

Purpose: The aim of this study was to evaluate the impact of treatment with new complete dentures on oral health-related quality of life and satisfaction of edentulous patients attending the Prosthodontic Department in a Dental School in Brazil. Methods: A total of 70 edentulous subjects (37-86 years) treated by undergradute students at the Araçatuba Dental School, University of State of São Paulo, were accessed. A specific questionnaire for edentulous patients (EDENT) based on the Oral Health Impact Profile (OHIP-EDENT) was applied to collect information on patient oral health-related quality of life. Questions related to the personal satisfaction of the edentulous patients with their complete dentures were also included. The patients were accessed before the treatment, and 3 months after receiving the new dentures. Results: After rehabilitation with new complete dentures, all domains of OHIP-EDENT showed significant improvements. There was also a significant improvement in patient satisfaction after placement of new complete dentures. Furthermore, it was possible to observe association between upper denture satisfaction and age. Conclusion: Conventional complete dentures may have a positive impact on oral health-related quality of life and satisfaction of edentulous patients. © 2012 Japan Prosthodontic Society.

Living kidney donors - a prospective study of quality of life before and after kidney donation

Although the safety of living kidney donation has been well established, prospective studies examining the physical and psychosocial aspects of the donor's quality of life are still scarce. Thus, the purpose of this prospective work was to assess the quality of life of 50 consecutive donors before and after kidney transplantation. All donors were asked to respond to both a donor questionnaire and the short-form 36-item health survey (SF-36). Interviews were individually conducted before, three months after, and over one yr after transplantation. Donation was considered a positive experience by all patients and had no impact on any physical or psychosocial aspect of the donor's life. Improved self-esteem and better quality of life after donation were reported in 52% of the cases. All donors would donate again and encouraged donation. SF-36 data indicated improvement in post-donation mental and physical scores among living donors closely related to recipient. Overall, most donors had a positive experience, felt no changes in quality of life, experienced enhanced self-esteem, would donate again, and recommended donation. © 2012 John Wiley & Sons A/S.

Polymorphisms in FGFBP1 and FGFBP2 genes associated with carcass and meat quality traits in chickens

In the past, the focus of broiler breeding programs on yield and carcass traits improvement led to problems related to meat quality. Awareness of public concern for quality resulted in inclusion of meat quality traits in the evaluation process. Nevertheless, few genes associated with meat quality attributes are known. Previous studies mapped quantitative trait loci for weight at 35 and 42 days in a region of GGA4 flanked by the microsatellite markers, MCW0240 and LEI0063. In this region, there are 2 fibroblast growth factor binding protein (FGFBP) genes that play an important role in embryogenesis, cellulardifferentiation, and proliferation in chickens. The objective of this study was to identify and associate single nucleotide polymorphisms (SNPs) in FGFBP1 and FGFBP2 with performance, carcass, and meat quality in experimental and commercial chicken populations. In the commercial population, SNP g.2014G>A in FGFBP1 was associated with decreased carcass weight (P < 0.05), and SNP g.651G>A in FGFBP2 was associated with thawing loss and meat redness content (P < 0.05). Four haplotypes were constructed based on 2 SNPs and were associated with breast weight, thawing loss, and meat redness content. The diplotypes were associated with thawing loss, lightness, and redness content. The SNPs evaluated in the present study may be used as markers in poultry breeding programs to aid in improving growth and meat quality traits. © FUNPEC-RP.

Pain and quality of life in patients undergoing radiotherapy for spinal metastatic disease treatment

Background: Radiotherapy is an important tool in the control of pain in patients with spinal metastatic disease. We aimed to evaluate pain and of quality of life of patients with spinal metastatic disease undergoing radiotherapy with supportive treatment. Methods. The study enrolled 30 patients. From January 2008 to January 2010, patients selection included those treated with a 20Gy tumour dose in five fractions. Patients completed the visual analogue scale for pain assessment and the SF-36 questionnaire for quality of life assessment. Results: The most frequent primary sites were breast, multiple myeloma, prostate and lymphoma. It was found that 14 spinal metastatic disease patients (46.66%) had restricted involvement of three or fewer vertebrae, while 16 patients (53.33%) had cases involving more than three vertebrae. The data from the visual analogue scale evaluation of pain showed that the average initial score was 5.7 points, the value 30days after the end of radiotherapy was 4.60 points and the average value 6months after treatment was 4.25 points. Notably, this final value was 25.43% lower than the value from the initial analysis. With regard to the quality of life evaluation, only the values for the functional capability and social aspects categories of the questionnaire showed significant improvement. Conclusion: Radiotherapy with supportive treatment appears to be an important tool for the treatment of pain in patients with spinal metastatic disease. © 2013 Valesin Filho et al; licensee BioMed Central Ltd.

Influence of anatomical location on CT numbers in cone beam computed tomography

Objective: To assess the influence of anatomical location on computed tomography (CT) numbers in mid- and full field of view (FOV) cone beam computed tomography (CBCT) scans. Study Design: Polypropylene tubes with varying concentrations of dipotassium hydrogen phosphate (K2HPO4) solutions (50-1200 mg/mL) were imaged within the incisor, premolar, and molar dental sockets of a human skull phantom. CBCT scans were acquired using the NewTom 3G and NewTom 5G units. The CT numbers of the K2HPO 4 phantoms were measured, and the relationship between CT numbers and K2HPO4 concentration was examined. The measured CT numbers of the K2HPO4 phantoms were compared between anatomical sites. Results: At all six anatomical locations, there was a strong linear relationship between CT numbers and K2HPO4 concentration (R 2 > 0.93). However, the absolute CT numbers varied considerably with the anatomical location. Conclusion: The relationship between CT numbers and object density is not uniform through the dental arch on CBCT scans. © 2013 Elsevier Inc.

Clinical Satisfaction and Quality of Ceramic Fixed Dentures

It is known that several factors can affect the clinical success and durability of fixed partial dentures. Therefore, the aim of the present study was to present a literature review about the longevity, clinical success, and quality, as well as, patients' and dental surgeons' satisfaction of ceramic fixed dentures. High rate of patients' satisfaction has been observed in relation to the esthetic of ceramic crowns. In addition, the literature has shown that dental ceramics can be used in several clinical situations with high success rate and longevity. Despite of failures and complications of ceramic restorations, nowadays, with the improvement of mechanical properties of such materials, ceramic crowns present a favorable prognosis and can be used in several clinical situations with high success rate, clinical quality, and great patients' satisfaction. © 2013 The American Ceramic Society.

Improvement of grapevine iron nutrition by a bovine blood-derived compound

Iron (Fe) is essential for chlorophyll formation and plant growth. Irondeficiency chlorosis is a major nutritional disorder in several fruit trees cultivated in calcareous and alkaline soils, reducing fruit yield and quality and causing heavy economic losses. Since chelated Fe, the most widespread fertilizers used for preventing or curing Fe deficiency, pose risks of environmental pollution, the development of sustainable agronomic alternatives represents a priority for the fruit industry. In this work, we investigated the effectiveness of a bovine blood-derived product (BB; 0,125% Fe) for preventing Fe-deficiency in grapevine plants. During the vegetative season 2011 potted plants of five graft combinations: Sangiovese/S4O, Cabernet Sauvignon/S4O and Cabernet Sauvignon/140 Ruggeri, 140 Ruggeri/Cabernet Sauvignon, Vitis riparia/Cabernet Sauvignon were grown on calcareous soil. Soil treatments included: 1) Control; 2) Fe-EDDHA (Fe 6%); 3) Bovine-Blood (5 g/L); 4) Bovine-Blood (20 g/L). With the exception of Cabernet Sauvignon/S4O plants, Fe-EDDHA increased SPAD units (leaf chlorophyll content). Bovine-blood at low concentrations had similar or higher SPAD units than Fe-EDDHA. Increasing concentration resulted in further increases in SPAD units only in some graft combinations. Data highlight the efficiency of Fe blood-compound in the prevention of grapevine Fe-deficiency over one growing season.

Use of cone-beam tomography and digital subtraction radiography for diagnosis and evaluation of traumatized teeth treated with endodontic surgery and MTA. A case report

The aim of this paper was to report the diagnosis and evaluation of periradicular bone repair by using computed tomography and digital subtraction radiography in an endodontic surgery case treated with mineral trioxide aggregate (MTA). The patient had local swelling and fistula 7years after trauma in the upper jaw. Periapical lesion on tooth #12 and root resorption of tooth #11 were detected radiographically. Endodontic therapy and placement of intracanal medication were carried out. After 3months, with no improvement in the clinical signs and symptoms, computed tomography was performed, showing extensive apical bone resorption on tooth #12 and dental resorption promoting communication of the root canal with the periodontium of tooth #11. The patient was referred to endodontic surgery. After surgery and postoperative periods of 15, 30, 60, 90, and 120days, standardized radiographs were taken, digitized, and subjected to digital subtraction of the images using Adobe Photoshop CS software. Four years later, a cone-beam computed tomography was performed, showing bone repair and absence of root resorption at tooth #11. In this clinical case, digital subtraction radiography was effective for early detection of new bone formation and evolution of repair. © 2011 John Wiley & Sons A/S.

Life quality assessment of patients after phacoemulsification or extracapsular cataract extraction

Métodos: O trabalho foi realizado no Serviço de Oftalmologia do Hospital Universitário Bettina Ferro de Souza, Belém, Pará, Brasil. O desenho experimental consistiu em séries de casos comparados. O estudo incluiu 60 indivíduos com catarata. Metade dos pacientes foi submetida à extração de catarata extracapsular convencional (ECEE) e a outra metade à extração de catarata por facoemulsificação (PHACO). Os pacientes foram entrevistados usando-se o questionário Visual Function 14 (VF-14) para determinar a qualidade de vida antes e 30 dias depois da cirurgia. Os resultados do exame oftalmológico foram registrados no arquivo de cada paciente e disponibilizados ao longo do trabalho. Foram usados análise de variância simples e comparação post-hoc com teste de Tukey e teste dos sinais para a análise estatística dos resultados. Resultados: O índice de satisfação médio VF-14 foi 38,0 e 89,4 antes e após a cirurgia, respectivamente, para o grupo ECEE, sendo 47,0 e 94,1 para o grupo PHACO. A melhora na qualidade de vida após a cirurgia foi significativa em ambos os grupos de pacientes (p<0,0001), tendo sido semelhante em ambos os grupos. Conclusão: A melhora observada na qualidade de vida avaliada foi significativa e diretamente relacionada à satisfação dos pacientes com os resultados da cirurgia, a qual também foi significativa (p<0,0001). A satisfação e a qualidade de vida são fatores individuais. Consequentemente, as respostas dos pacientes relativas à melhoria em cada atividade são subjetivas e dependem unicamente da percepção individual.

Analysis of quality indicators of central sterile supply departments at accredited public hospitals

O objetivo do estudo foi descrever e analisar os indicadores de qualidade de Centros de Material e Esterilização de hospitais públicos acreditados do Estado de São Paulo e sua gestão pelos responsáveis do setor. Trata-se de um estudo de casos múltiplos, onde são apresentados os dados interligados de três hospitais acreditados num relatório de casos cruzados. Os dados foram coletados por entrevista semiestruturada com o responsável e por visita técnica com análise documental. Os resultados constatam a dificuldade dos responsáveis em pontuar os indicadores específicos do setor e os referidos foram os de produção e pesquisa de satisfação do cliente que não retratam a qualidade efetiva do serviço, pois são fragmentados, sem consolidação de resultados na busca de melhorias, o que sugere baixa especificidade e baixa sensibilidade dos critérios da Organização Nacional de Acreditação à realidade deste setor.

The Buffalo Genome and the Application of Genomics in Animal Management and Improvement

The publication of the human genome sequence in 2001 was a major step forward in knowledge necessary to understand the variations between individuals. For farmed species, genomic sequence information will facilitate the selection of animals optimised to live, and be productive, in particular environments. The availability of cattle genome sequence has allowed the breeding industry to take the first steps towards predicting phenotypes from genotypes by estimating a genomic breeding value (gEBV) for bulls using genome-wide DNA markers. The sequencing of the buffalo genome and creation of a panel of DNA markers has created the opportunity to apply molecular selection approaches for this species.The genomes of several buffalo of different breeds were sequenced and aligned with the bovine genome, which facilitated the identification of millions of sequence variants in the buffalo genomes. Based on frequencies of variants within and among buffalo breeds, and their distribution across the genome compared with the bovine genome, 90,000 putative single nucleotide polymorphisms (SNP) were selected to create an Axiom (R) Buffalo Genotyping Array 90K. This SNP Chip was tested in buffalo populations from Italy and Brazil and found to have at least 75% high quality and polymorphic markers in these populations. The 90K SNP chip was then used to investigate the structure of buffalo populations, and to localise the variations having a major effect on milk production.

Quality management, environmental management maturity, green supply chain practices and green performance of Brazilian companies with ISO 14001 certification: Direct and indirect effects

This study aims to test a new conceptual model based on the relationship between quality management (QM), environmental management maturity (EMM), adoption of external practices of green supply chain management (GSCM) (green purchasing and collaboration with customers) and green performance (GP) with data from 95 Brazilian firms with ISO 14001. To our knowledge, such links and relationships are not simultaneously identified and tested in the literature. The results indicate the validation of all of the research hypotheses. This paper highlights that an improvement in green performance will require attention to quality management, environmental management maturity, and green supply chain. (C) 2014 Elsevier Ltd. All rights reserved.

Effects of laser beam energy on the pulsed Nd:YAG laser welding of thin sheet corrosion resistant materials

The aim of this study was to value the possibility to join, for pulsed Nd:YAG laser welding, thin foils lap joints for sealing components in corrosive environment. Experimental investigations were carried out using a pulsed neodymium: yttrium aluminum garnet laser weld to examine the influence of the pulse energy in the characteristics of the weld fillet. The pulse energy was varied from 1.0 to 2.5 J at increments of 0.25 J with a 4 ms pulse duration. The base materials used for this study were AISI 316L stainless steel and Ni-based alloys foils with 100 mu m thickness. The welds were analyzed by electronic and optical microscopy, tensile shear tests and micro hardness. The results indicate that pulse energy control is of considerable importance to thin foil weld quality because it can generate good mechanical properties and reduce discontinuities in weld joints. The ultimate tensile strength of the welded joints increased at first and then decreased as the pulse energy increased. In all the specimens, fracture occurred in the top foil heat-affected zone next to the fusion line. The microhardness was almost uniform across the parent metal, HAZ and weld metal. A slight increase in the fusion zone and heat-affected zone compared to those measured in the base metal was observed. This is related to the microstructural refinement in the fusion zone, induced by rapid cooling of the laser welding. The process appeared to be very sensitive to the gap between couples.

Esthetic and function improvement by direct composite resins and biomimetic concept

Aim: This case report describe a resin layering restorative technique based on biomimetic concept to improve esthetics in a patient with dental defects that affected both enamel and dentin in anterior teeth. Background: Severe structural defect in anterior teeth compromises esthetics and it is a high challenge to become the defect imperceptible after the restoration. Case description: A clinical sequence of applying different composite resin layers allowed the reproduction of the interaction between hard dental tissues and the restorative material. Conclusion: This technique achieved a satisfactory final esthetic outcome, preserving sound teeth structure and at same time, improved the quality of life of the young patient. Clinical significance: The utilization of the biomimetic concept to increase a disharmonic smile with dental defects is based in a conservative approach, which reached a satisfactory and esthetic outcome.

Quality management, environmental management maturity, green supply chain practices and green performance of Brazilian companies with ISO 14001 certification: Direct and indirect effects (Reprint from vol 67C, pg 39-51)

This study aims to test a new conceptual model based on the relationship between quality management (QM), environmental management maturity (EMM), adoption of external practices of green supply chain management (GSCM) (green purchasing and collaboration with customers) and green performance (GP) with data from 95 Brazilian firms with ISO 14001. To our knowledge, such links and relationships are not simultaneously identified and tested in the literature. The results indicate the validation of all of the research hypotheses. This paper highlights that an improvement in green performance will require attention to quality management, environmental management maturity, and green supply chain.