Measuring the effects through time of the influence of visuomotor and visuotactile synchronous stimulation on a virtual body ownership illusion

Previous studies have examined the experience of owning a virtual surrogate body or body part through specific combinations of cross-modal multisensory stimulation. Both visuomotor (VM) and visuotactile (VT) synchronous stimulation have been shown to be important for inducing a body ownership illusion, each tested separately or both in combination. In this study we compared the relative importance of these two cross-modal correlations, when both are provided in the same immersive virtual reality setup and the same experiment. We systematically manipulated VT and VM contingencies in order to assess their relative role and mutual interaction. Moreover, we present a new method for measuring the induced body ownership illusion through time, by recording reports of breaks in the illusion of ownership ("breaks") throughout the experimental phase. The balance of the evidence, from both questionnaires and analysis of the breaks, suggests that while VM synchronous stimulation contributes the greatest to the attainment of the illusion, a disruption of either (through asynchronous stimulation) contributes equally to the probability of a break in the illusion.

Optimisation of data analysis method for a fluidized bed combustion test rig

Nowadays the used fuel variety in power boilers is widening and new boiler constructions and running models have to be developed. This research and development is done in small pilot plants where more faster analyse about the boiler mass and heat balance is needed to be able to find and do the right decisions already during the test run. The barrier on determining boiler balance during test runs is the long process of chemical analyses of collected input and outputmatter samples. The present work is concentrating on finding a way to determinethe boiler balance without chemical analyses and optimise the test rig to get the best possible accuracy for heat and mass balance of the boiler. The purpose of this work was to create an automatic boiler balance calculation method for 4 MW CFB/BFB pilot boiler of Kvaerner Pulping Oy located in Messukylä in Tampere. The calculation was created in the data management computer of pilot plants automation system. The calculation is made in Microsoft Excel environment, which gives a good base and functions for handling large databases and calculations without any delicate programming. The automation system in pilot plant was reconstructed und updated by Metso Automation Oy during year 2001 and the new system MetsoDNA has good data management properties, which is necessary for big calculations as boiler balance calculation. Two possible methods for calculating boiler balance during test run were found. Either the fuel flow is determined, which is usedto calculate the boiler's mass balance, or the unburned carbon loss is estimated and the mass balance of the boiler is calculated on the basis of boiler's heat balance. Both of the methods have their own weaknesses, so they were constructed parallel in the calculation and the decision of the used method was left to user. User also needs to define the used fuels and some solid mass flowsthat aren't measured automatically by the automation system. With sensitivity analysis was found that the most essential values for accurate boiler balance determination are flue gas oxygen content, the boiler's measured heat output and lower heating value of the fuel. The theoretical part of this work concentrates in the error management of these measurements and analyses and on measurement accuracy and boiler balance calculation in theory. The empirical part of this work concentrates on the creation of the balance calculation for the boiler in issue and on describing the work environment.

Transnational private authority and the participation of workers' organizations in the regulatory space surrounding the employment relationship

Most corporate codes of conduct and multi-stakeholder sustainability standards guarantee workers' rights to freedom of association and collective bargaining, but many authors are sceptical about the concrete impact of codes and standards of this kind. In this paper we use Hancher and Moran's (1998) concept of 'regulatory space' to assess the potential of private transnational regulation to support the growth of trade union membership and collective bargaining relationships, drawing on some preliminary case study results from a project on the impact of the International Finance Corporation's (IFC) social conditionality on worker organization and social dialogue. One of the major effects of neoliberal economic and industrial policy has been the routine exclusion of workers' organizations from regulatory processes on the grounds that they introduce inappropriate 'political' motives into what ought to be technical decision-making processes. This, rather than any direct attack on their capacity to take action, is what seems best to explain the global decline in union influence (Cradden 2004; Howell 2007; Howe 2012). The evidence we present in the paper suggests that private labour regulation may under certain conditions contribute to a reversal of this tendency, re-establishing the legitimacy of workers' organizations within regulatory processes and by extension the legitimacy of their use of economic and social power. We argue that guarantees of freedom of association and bargaining rights within private regulation schemes are effective to the extent that they can be used by workers' organizations in support of a claim for access to the regulatory space within which the terms and conditions of the employment relationship are determined. Our case study evidence shows that certain trade unions in East Africa have indeed been able to use IFC and other private regulation schemes as levers to win recognition from employers and to establish collective bargaining relationships. Although they did not attempt to use formal procedures to make a claim for the enforcement of freedom of association rights on behalf of their members, the unions did use enterprises' adherence to private regulation schemes as a normative point of reference in argument and political exchange about worker representation. For these unions, the regulation was a useful addition to the range of arguments that they could deploy as means to justify their demand for recognition by employers. By contrast, the private regulation that helps workers' organizations to win access to regulatory processes does little to ensure that they are able to participate meaningfully, whether in terms of technical capacity or of their ability to mobilize social power as a counterweight to the economic power of employers. To the extent that our East African unions were able to make an impact on terms and conditions of employment via their participation in regulatory space it was solely on the basis of their own capacities and resources and the application of national labour law.

Distribution systems of the food sector in Russia: the perspective of Finnish food industry

Finnish food producers' trade with Russia has experienced profound changes since the collapse of the Soviet Union. Simultaneously, the distribution systems of foodstuffs have changed remarkably. This study sheds some light into these changes and analyses the current situation in distribution systems of foodstuffs in Russia. In addition, the study discusses the possibilities of Finnish food producers to get more of their products to the shelves of Russian food retail stores. Before the 1998 financial crisis, the import of foreign foodstuffs was booming in Russia due to the overvalued rouble. As a result of the financial crisis, food import collapsed. The export of Finnish foodstuffs to Russia has been slowly recovering during the past few years, but in the most important product categories the pre-crisis levels have so far not been reached and maybe will not be reached. In certain product categories the growth has been only marginal. It seems that starting localproduction will become increasingly important in the future. This is further encouraged by the fact that Russian consumers favour domestic food products. Russian consumers are very price conscious and demand quality in food products. The perceived price-quality ratio is an important criterion in the purchase decision.The majority of foodstuff retail is still conducted via unorganised forms of trade (e.g. kiosks and marketplaces) but modern retail chains are developing at a fast pace in Russia. They are also expected to dominate the retail trade in foodstuffs over the unorganised forms of trade in the future. This will change the distribution systems as well. The retail chains are trying to shorten the distribution chain, similarly to what has been seen in the Western countries. This together with the strengthening of retail chains is likely to shrink the role of wholesalers, as the chains increasingly want to work directly with the producers. Many large retail chains are acquiring or have already acquired a distribution centre or centres in order to boost efficiency and control the flow of products. The strengthening of the retail chains also gives them power in negotiations, which the producers and distributors have to adjust to. For example store entry fees and retail chains' own private label products pose challenges to the food producers. In the food production sector the competition is fierce, as large Russianand foreign producers want to ensure their piece of the market. The largest producers utilise their size: they invest in big marketing campaigns and are willing to pay high entry fees to retail chains in order to secure a place on the store shelves and to build a strong brand in Russia. This complicates the situation from the viewpoint of small producers. Currently, the most popular type of distribution system among the interviewed Finnish food producers is based on a network of local distributors. There is, however, a strong consensus on the importanceof starting local production in order to be a serious actor in Russia in the future. Factors that hinder the starting of local production include the lack of local infrastructure and qualified staff, and the low risk tolerance of Finnish firms. Major barriers for entry in Russia are the actions of authorities, fierce competition, fragmented market and Finnish producers' heavy production costs. The suggested strategies for increasing the market share include focusing geographically or segment-wise, introducing new products, starting local production, andcooperation between Finnish producers. Smallness was one reason why Finnish producers had to cut down their operations in Russia due to the 1998 crisis. Smaller producers had fewer resources to tolerate losses during the period of crisis. Smallness is reflected also on trade negotiations with retail chains and distributors. It makes it harder to cope with the store entry fees and to differentiatefrom the mass of products propped up by expensive advertising. Finally, it makes it harder for Finnish producers to start or expand local production, as it is more difficult for a small producer to get financing and to tolerate the increased risks. Compensating for the smallness might become the crucial factor determining the future success of Finnish food producers in the Russian market.

The Influence of Process Conditions on the Deresination Efficiency in Mechanical Pulp Washing

The aim of this thesis was to produce information for the estimation of the flow balance of wood resin in mechanical pulping and to demonstrate the possibilities for improving the efficiency of deresination in practice. It was observed that chemical changes in wood resin take place only during peroxide bleaching, a significant amount of water dispersed wood resin is retained in the pulp mat during dewatering and the amount of wood resin in the solid phase of the process filtrates is very small. On the basis of this information there exist three parameters related to behaviour of wood resin that determine the flow balance in the process: 1. The liberation of wood resin to the pulp water phase 2. Theretention of water dispersed wood resin in dewatering 3. The proportion of wood resin degraded in the peroxide bleaching The effect of different factors on these parameters was evaluated with the help of laboratory studies and a literature survey. Also, information related to the values of these parameters in existing processes was obtained in mill measurements. With the help of this information, it was possible to evaluate the deresination efficiency and the effect of different factors on this efficiency in a pulping plant that produced low-freeness mechanical pulp. This evaluation showed that the wood resin content of mechanical pulp can be significantly decreased if there exists, in the process, a peroxide bleaching and subsequent washing stage. In the case of an optimal process configuration, as high as a 85 percent deresination efficiency seems to be possible with a water usage level of 8 m3/o.d.t.

Atypical coordination of cortical oscillations in response to speech in autism.

Subjects with autism often show language difficulties, but it is unclear how they relate to neurophysiological anomalies of cortical speech processing. We used combined EEG and fMRI in 13 subjects with autism and 13 control participants and show that in autism, gamma and theta cortical activity do not engage synergistically in response to speech. Theta activity in left auditory cortex fails to track speech modulations, and to down-regulate gamma oscillations in the group with autism. This deficit predicts the severity of both verbal impairment and autism symptoms in the affected sample. Finally, we found that oscillation-based connectivity between auditory and other language cortices is altered in autism. These results suggest that the verbal disorder in autism could be associated with an altered balance of slow and fast auditory oscillations, and that this anomaly could compromise the mapping between sensory input and higher-level cognitive representations.

Energiankäytön kartoitus Lappeenrannan sementtitehtaalla.

Diplomityön tavoitteena oli kartoittaa Finnsementti Oy:n Lappeenrannan sementtitehtaan energiankäyttöä ja etsiä potentiaalisia energiansäästökohteita. Diplomityö liittyy Kauppa- ja teollisuusministeriön ja Teollisuuden ja Työnantajain Keskusliiton väliseen teollisuuden energiankäytön tehostamiseen tähtäävään puitesopimukseen, johon Finnsementti Oy on liittynyt. Diplomityön teoriaosassa tutustutaan sementin kemiaan raaka-aineista valmiisiin tuotteisiin. Lisäksi kartoitetaan sementtiteollisuuden energiansäästömahdollisuuksia laite-hankintojen ja prosessin optimointinnin kannalta. Työssä tutustutaan sementin-valmistuksessa käytettäviin laitteistoihin ja selvitetään niiden teknistä kehitystä ja energiaasäästäviä ratkaisuja. Kokeellinen osuus alkaa yksityiskohtaisella kuvauksella Lappeenrannan sementtitehtaan valmistusprosessista. Kokeellisessa osassa tutustutaan tehtaan energiankulutukseen sähkön ja polttoaineen muodossa. Lisäksi käsitellään paineilmaa ja vettä. Sähkön osalta kokeellinen osa sisältää sähkönkulutuksen historian ja sähkönjakeluverkon selvityksen lisäksi tehtaalla käytössä olevien luokittimien tehokkuustarkasteluita sähkönkulutuksen kannalta. Polttoaineen osalta diplomityö sisältää sementtiuunien energiataseiden mittaukset ja tulosten laskemisen sekä Excel-pohjaisen menetelmän kehittämisen energiataseiden laskemiseksi tulevaisuudessa. Paineilman ja veden osalta selvitetään niiden kulutusta tehtaalla ja lasketaan paineilmalle teoreettinen ominaissähkönkulutus. Luokittimien tehokkuustarkastelujen osalta havaittiin raakamyllyn luokittimen erottelu-terävyyden olevan huono verrattuna nykyaikaisiin korkeatehokkuusluokittimiin. Sementtimyllyjen luokittimien toiminnasta ei havaittu merkittäviä ongelmia. Energia-taseiden tuloksina havaittiin Lappeenrannan sementtitehtaan sementtiuunien edustavan vanhentunutta sementinvalmistustekniikkaa. Molempien uunien savukaasukanavien vuotoilmojen määrien havaittiin olevan suuret. Energiataloutta pystyttäisiin parantamaan mm. uusilla polttimilla, jolloin lämmittämättömän ensiöilman osuutta saataisiin pienentymään ja polttoaineen polttoa tehostumaan. Paineilman suhteen havaittiin kuumailman paineenalennuksen aiheuttavan turhia energiahäviöitä.

Methods of Jet to Wire Speed Ratio Determination and Its Effect in Paper and Board Manufacture

Suihku/viira-nopeussuhde on perälaatikon huulisuihkun ja viiran välinen nopeusero. Se vaikuttaa suuresti paperin ja kartongin loppuominaisuuksiin, kuten formaatioon sekä kuituorientaatioon ja näin ollen paperin lujuusominaisuuksiin. Tämän johdosta on erityisen tärkeää tietää todellinen suihku/viira-nopeussuhde paperin- ja kartonginvalmistuksessa. Perinteinen suihku/viira-nopeussuhteen määritysmenetelmä perustuu perälaatikon kokonaispaineeseen. Tällä menetelmällä kuitenkin todellinen huulisuihkun nopeus saattaa usein jäädä tietämättä johtuen mahdollisesta virheellisestä painemittarin kalibroinnista sekä laskuyhtälön epätarkkuuksista. Tämän johdosta on kehitetty useita reaaliaikaisia huulisuihkun mittausmenetelmiä. Perälaatikon parametrien optimaaliset asetukset ovat mahdollista määrittää ja ylläpitää huulisuihkun nopeuden “on-line” määrityksellä. Perälaatikon parametrejä ovat mm. huulisuihku, huuliaukon korkeusprofiili, reunavirtaukset ja syöttövirtauksen tasaisuus. Huulisuihkun nopeuden on-line mittauksella paljastuu myös muita perälaatikon ongelmakohtia, kuten mekaaniset viat, joita on perinteisesti tutkittu aikaa vievillä paperin ja kartongin lopputuoteanalyyseillä.

Three Essays on International Trade and the Labor Market

The thesis is made of three independent chapters interested in the impact of globalization on workers in industrialized countries. The dissertation is especially focused on identifying the causal impact of international trade on workers' mobility, wages, and employment with both a short- and medium-term perspective. The first paper explores the relation between intra-industry trade (IIT) expansion and associated worker flows, taking the latter as an indicator of labor-market adjustment costs. Being the first study to combine theoretical simulations and a novel identification strategy, we find that both theoretical and empirical analyses are consistent with the "smooth adjustment hypothesis", according to which IIT expansion is less disruptive than inter-industry trade expansion. The study therefore lends support to the use of IIT indices as first-pass proxies for the adjustment effects of trade expansion. The second chapter contrasts the impact of increased import competition coming from China and the European Union (EU) on workers in the United Kingdom over a 15-year period. The most salient findings show that increased imports from China had significantly negative effects on workers' earnings, wages and employment. In contrast, larger imports from the EU are associated with positive worker-level outcomes, which is largely explained by the fact that increased imports from the EU were mostly offset by increased same-industry exports to the EU. Besides, we find that increased imports from China exert additional pressure on workers through spillovers to employment and wages in downstream industries. Finally, the last chapter is focused on the impact of exposure to trade and real exchange rate shocks on wages for Swiss manufacturing workers. A particular attention is made to consistently estimate the causal effect in using a two-step gravity-type identification strategy. The study shows that the impact of trade and exchange rate movements is concentrated among high-skilled workers almost exclusively.

Measuring the effects through time of the influence of visuomotor and visuotactile synchronous stimulation on a virtual body ownership illusion

Previous studies have examined the experience of owning a virtual surrogate body or body part through specific combinations of cross-modal multisensory stimulation. Both visuomotor (VM) and visuotactile (VT) synchronous stimulation have been shown to be important for inducing a body ownership illusion, each tested separately or both in combination. In this study we compared the relative importance of these two cross-modal correlations, when both are provided in the same immersive virtual reality setup and the same experiment. We systematically manipulated VT and VM contingencies in order to assess their relative role and mutual interaction. Moreover, we present a new method for measuring the induced body ownership illusion through time, by recording reports of breaks in the illusion of ownership ("breaks") throughout the experimental phase. The balance of the evidence, from both questionnaires and analysis of the breaks, suggests that while VM synchronous stimulation contributes the greatest to the attainment of the illusion, a disruption of either (through asynchronous stimulation) contributes equally to the probability of a break in the illusion.

Validation of plant dynamic model by online and laboratory measurements – a tool to predict online COD loads out of production of mechanical printing papers

COD discharges out of processes have increased in line with elevating brightness demands for mechanical pulp and papers. The share of lignin-like substances in COD discharges is on average 75%. In this thesis, a plant dynamic model was created and validated as a means to predict COD loading and discharges out of a mill. The assays were carried out in one paper mill integrate producing mechanical printing papers. The objective in the modeling of plant dynamics was to predict day averages of COD load and discharges out of mills. This means that online data, like 1) the level of large storage towers of pulp and white water 2) pulp dosages, 3) production rates and 4) internal white water flows and discharges were used to create transients into the balances of solids and white water, referred to as “plant dynamics”. A conversion coefficient was verified between TOC and COD. The conversion coefficient was used for predicting the flows from TOC to COD to the waste water treatment plant. The COD load was modeled with similar uncertainty as in reference TOC sampling. The water balance of waste water treatment was validated by the reference concentration of COD. The difference of COD predictions against references was within the same deviation of TOC-predictions. The modeled yield losses and retention values of TOC in pulping and bleaching processes and the modeled fixing of colloidal TOC to solids between the pulping plant and the aeration basin in the waste water treatment plant were similar to references presented in literature. The valid water balances of the waste water treatment plant and the reduction model of lignin-like substances produced a valid prediction of COD discharges out of the mill. A 30% increase in the release of lignin-like substances in the form of production problems was observed in pulping and bleaching processes. The same increase was observed in COD discharges out of waste water treatment. In the prediction of annual COD discharge, it was noticed that the reduction of lignin has a wide deviation from year to year and from one mill to another. This made it difficult to compare the parameters of COD discharges validated in plant dynamic simulation with another mill producing mechanical printing papers. However, a trend of moving from unbleached towards high-brightness TMP in COD discharges was valid.

Reaction Kinetics and Viscosity Modelling in the Fusion Syntheses of Ca- and Ca/Mg-resinates

Rosin is a natural product from pine forests and it is used as a raw material in resinate syntheses. Resinates are polyvalent metal salts of rosin acids and especially Ca- and Ca/Mg- resinates find wide application in the printing ink industry. In this thesis, analytical methods were applied to increase general knowledge of resinate chemistry and the reaction kinetics was studied in order to model the non linear solution viscosity increase during resinate syntheses by the fusion method. Solution viscosity in toluene is an important quality factor for resinates to be used in printing inks. The concept of critical resinate concentration, c crit, was introduced to define an abrupt change in viscosity dependence on resinate concentration in the solution. The concept was then used to explain the non-inear solution viscosity increase during resinate syntheses. A semi empirical model with two estimated parameters was derived for the viscosity increase on the basis of apparent reaction kinetics. The model was used to control the viscosity and to predict the total reaction time of the resinate process. The kinetic data from the complex reaction media was obtained by acid value titration and by FTIR spectroscopic analyses using a conventional calibration method to measure the resinate concentration and the concentration of free rosin acids. A multivariate calibration method was successfully applied to make partial least square (PLS) models for monitoring acid value and solution viscosity in both mid-infrared (MIR) and near infrared (NIR) regions during the syntheses. The calibration models can be used for on line resinate process monitoring. In kinetic studies, two main reaction steps were observed during the syntheses. First a fast irreversible resination reaction occurs at 235 °C and then a slow thermal decarboxylation of rosin acids starts to take place at 265 °C. Rosin oil is formed during the decarboxylation reaction step causing significant mass loss as the rosin oil evaporates from the system while the viscosity increases to the target level. The mass balance of the syntheses was determined based on the resinate concentration increase during the decarboxylation reaction step. A mechanistic study of the decarboxylation reaction was based on the observation that resinate molecules are partly solvated by rosin acids during the syntheses. Different decarboxylation mechanisms were proposed for the free and solvating rosin acids. The deduced kinetic model supported the analytical data of the syntheses in a wide resinate concentration region, over a wide range of viscosity values and at different reaction temperatures. In addition, the application of the kinetic model to the modified resinate syntheses gave a good fit. A novel synthesis method with the addition of decarboxylated rosin (i.e. rosin oil) to the reaction mixture was introduced. The conversion of rosin acid to resinate was increased to the level necessary to obtain the target viscosity for the product at 235 °C. Due to a lower reaction temperature than in traditional fusion synthesis at 265 °C, thermal decarboxylation is avoided. As a consequence, the mass yield of the resinate syntheses can be increased from ca. 70% to almost 100% by recycling the added rosin oil.

Sustainability of palm oil production and opportunities for Finnish technology and know-how transfer

The global demand for palm oil is growing, thus prompting an increase in the global production particularly in Malaysia and Indonesia. Such increasing demand for palm oil is due to palm oil’s relatively cheap price and versatile advantage both in edible and non-edible applications. Along with the increasing demand for palm oil, particularly for the production of biofuel, is a heated debate on its sustainability. Ecological degradation, climate change and social issues are among the main sustainability issues pressing the whole palm oil industry today. Clean Development Mechanism (CDM) projects fulfilling the imperatives of the Kyoto Protocol are starting to gain momentum in Malaysia as reflected by the increasing registration of CDM projects in the palm oil mills. Most CDM projects in palm oil mills are on waste-to-energy, cocomposting, and methane recovery with the latter being the most common. The study on greenhouse gases (GHG) in the milling process points that biogas collection and energy utilisation has the greatest positive effect on GHG balance. On the other hand, empty fruit bunches (EFB) end-use as energy and high energy efficiency of the mill have the least effect on GHG balance of the mill. The range of direct GHG emissions from the palm oil mill is from 2.5 to 27 gCO2e/MJCPO, while the range of GHG emissions with all indirect and avoided emissions included is from -9 to 29 gCO2e/MJCPO. Comparing this GHG balance result with that of the EU RES-Directive suggests a further check on the values and emissions consideration of the latter.

Essays on pricing of risk and international linkage of Russian stock market

Last two decades have seen a rapid change in the global economic and financial situation; the economic conditions in many small and large underdeveloped countries started to improve and they became recognized as emerging markets. This led to growth in the amounts of global investments in these countries, partly spurred by expectations of higher returns, favorable risk-return opportunities, and better diversification alternatives to global investors. This process, however, has not been without problems and it has emphasized the need for more information on these markets. In particular, the liberalization of financial markets around the world, globalization of trade and companies, recent formation of economic and regional blocks, and the rapid development of underdeveloped countries during the last two decades have brought a major challenge to the financial world and researchers alike. This doctoral dissertation studies one of the largest emerging markets, namely Russia. The motivation why the Russian equity market is worth investigating includes, among other factors, its sheer size, rapid and robust economic growth since the turn of the millennium, future prospect for international investors, and a number of important major financial reforms implemented since the early 1990s. Another interesting feature of the Russian economy, which gives motivation to study Russian market, is Russia’s 1998 financial crisis, considered as one of the worst crisis in recent times, affecting both developed and developing economies. Therefore, special attention has been paid to Russia’s 1998 financial crisis throughout this dissertation. This thesis covers the period from the birth of the modern Russian financial markets to the present day, Special attention is given to the international linkage and the 1998 financial crisis. This study first identifies the risks associated with Russian market and then deals with their pricing issues. Finally some insights about portfolio construction within Russian market are presented. The first research paper of this dissertation considers the linkage of the Russian equity market to the world equity market by examining the international transmission of the Russia’s 1998 financial crisis utilizing the GARCH-BEKK model proposed by Engle and Kroner. Empirical results shows evidence of direct linkage between the Russian equity market and the world market both in regards of returns and volatility. However, the weakness of the linkage suggests that the Russian equity market was only partially integrated into the world market, even though the contagion can be clearly seen during the time of the crisis period. The second and the third paper, co-authored with Mika Vaihekoski, investigate whether global, local and currency risks are priced in the Russian stock market from a US investors’ point of view. Furthermore, the dynamics of these sources of risk are studied, i.e., whether the prices of the global and local risk factors are constant or time-varying over time. We utilize the multivariate GARCH-M framework of De Santis and Gérard (1998). Similar to them we find price of global market risk to be time-varying. Currency risk also found to be priced and highly time varying in the Russian market. Moreover, our results suggest that the Russian market is partially segmented and local risk is also priced in the market. The model also implies that the biggest impact on the US market risk premium is coming from the world risk component whereas the Russian risk premium is on average caused mostly by the local and currency components. The purpose of the fourth paper is to look at the relationship between the stock and the bond market of Russia. The objective is to examine whether the correlations between two classes of assets are time varying by using multivariate conditional volatility models. The Constant Conditional Correlation model by Bollerslev (1990), the Dynamic Conditional Correlation model by Engle (2002), and an asymmetric version of the Dynamic Conditional Correlation model by Cappiello et al. (2006) are used in the analysis. The empirical results do not support the assumption of constant conditional correlation and there was clear evidence of time varying correlations between the Russian stocks and bond market and both asset markets exhibit positive asymmetries. The implications of the results in this dissertation are useful for both companies and international investors who are interested in investing in Russia. Our results give useful insights to those involved in minimising or managing financial risk exposures, such as, portfolio managers, international investors, risk analysts and financial researchers. When portfolio managers aim to optimize the risk-return relationship, the results indicate that at least in the case of Russia, one should account for the local market as well as currency risk when calculating the key inputs for the optimization. In addition, the pricing of exchange rate risk implies that exchange rate exposure is partly non-diversifiable and investors are compensated for bearing the risk. Likewise, international transmission of stock market volatility can profoundly influence corporate capital budgeting decisions, investors’ investment decisions, and other business cycle variables. Finally, the weak integration of the Russian market and low correlations between Russian stock and bond market offers good opportunities to the international investors to diversify their portfolios.

Suorien ulkomaisten investointien vaikutukset kohdemaassa: Itäisen Euroopan siirtymätaloudet

Tämä kandidaatintyö käsittelee suorien ulkomaisten investointien vaikutuksia itäisen Euroopan siirtymätalouksissa keskittyen erityisesti Puolaan, Viroon ja Ukrainaan. Suorat ulkomaiset investoinnit ovat tärkeä osa kansainvälistä kauppaa ja niillä on suuri rooli monen maan taloudessa. Työ koostuu kolmesta suuremmasta kokonaisuudesta, joista ensimmäisenä on suoran ulkomaisen investoinnin teoria. Toisessa osiossa esitellään lyhyesti kohdemaat, minkä jälkeen kolmannessa osiossa keskitytään suorien ulkomaisten investointien teoreettisiin vaikutuksiin. Teoreettisista vaikutuksista käsitellään tarkemmin vaikutukset talouskasvuun, maksutaseeseen, tuottavuuteen, tuotantoon, teknologiaan, työvoimaan, markkinarakenteeseen ja ympäristöön. Näitä suorien ulkomaisten investointien vaikutuksia havainnollistetaan esimerkeillä kohdemaista.