Avaliação da sustentabilidade corporativa: estudo das relações híbridas pelo modelo do Hybrid Bottom Line

A presente tese reflete sobre os temas do desenvolvimento sustentável, da sustentabilidade corporativa, da responsabilidade social corporativa e das dimensões do Triple Bottom Line. O principal objetivo do nosso trabalho é contribuir para o conhecimento das relações que se estabelecem nas interseções entre a dimensão económica, social e ambiental da sustentabilidade corporativa, aqui designadas de relações híbridas. Neste sentido, desenvolveu-se um enquadramento teórico que fundamenta o modelo proposto, designado por Hybrid Bottom Line. De acordo com este enquadramento procurou-se conceber uma metodologia que permitisse analisar como é que estas relações de interseção entre economia-ambiente e economia-social se verificam e de que forma os seus resultados podem beneficiar a compreensão, avaliação e melhorias no entendimento da sustentabilidade corporativa, bem como possibilitar uma análise dirigida a fatores recombinantes específicos. Em complemento, foi desenvolvida uma proposta que permite posicionar o esforço desenvolvido pela empresa no âmbito da sustentabilidade e desta forma tipificar as suas ações. Nesta tese a abordagem empírica recaiu na análise dos relatórios de sustentabilidade publicados pelas empresas e baseados nas diretivas de relato propostas pelo Global Reporting Initiative. A amostra para o estudo abrangeu um total de 85 empresas de diferentes dimensões de 36 sectores económicos e representando 36 países de 5 continentes. A análise dos resultados foi feita utilizando diversos métodos de análise de dados (de frequência e de conteúdo) e análises estatísticas (análise de contingência, variância e de correspondências múltiplas) que permitiram observar as relações entre as dimensões do Triple Bottom Line, dando lugar à construção de uma matriz de relações híbridas. Seguidamente foi realizada uma análise longitudinal de uma das empresas da amostra tendo como referência a matriz híbrida obtida, assim como a tipificação da empresa no âmbito da sustentabilidade. Os resultados alcançados nas diferentes fases indicam que o enquadramento teórico que foi utilizado é útil para a análise das interseções entre as dimensões e permite uma avaliação dirigida a fatos ocorridos entre pares dimensionais, bem como projetar análises e posicionamentos futuros. Os resultados obtidos sugerem que a proposta apresentada é útil e deverá ser utilizada e desenvolvida noutros contextos. Esta tese contribui para a ideia de que a responsabilidade corporativa não deve ser só vista e operacionalizada como uma realidade de dimensões segmentadas mas também deve ser observada como um conjunto possível de interações que se manifestam nas interseções das suas diferentes dimensões.

Optimisation and design of post-tensioning anchorage corner blisters in concrete box girder bidges

The design of anchorage blisters of internal continuity post-tensioning tendons of bridges built by the cantilever method, presents some peculiarities, not only because they are intermediate anchorages but also because these anchorages are located in blisters, so the prestressing force has to be transferred from the blister the bottom slab and web of the girder. The high density of steel reinforcement in anchorage blisters is the most common reason for problems with concrete cast in situ, resulting in zones with low concrete compacity, leading to concrete crushing failures under the anchor plates. A solution may involve improving the concrete compression and tensile strength. To meet these requirements a high-performance fibre reinforced self-compacting mix- ture (HPFRC) was used in anchorage corner blisters of post-tensioning tendons, reducing the concrete cross-section and decreasing the reinforcement needed. To assess the ultimate capacity and the adequate serviceability of the local anchorage zone after reducing the minimum concrete cross-section and the confining reinforcement, specified by the anchorage device supplier for the particular tendon, load transfer tests were performed. To investigate the behaviour of anchorage blisters regarding the transmission of stresses to the web and the bottom slab of the girder, and the feasibility of using high performance concrete only in the blister, two half scale models of the inferior corner of a box girder existing bridge were studied: a reference specimen of ordinary reinforced concrete and a HPFRC blister specimen. The design of the reinforcement was based in the tensile forces obtained on strut-and-tie models. An experimental program was carried out to assess the models used in design and to study the feasibility of using high performance concrete only in the blister, either with casting in situ, or with precast solutions. A non-linear finite element analysis of the tested specimens was also performed and the results compared.

Novos contributos para o estudo da casa nobre em Portugal

Disponível - livro de resumos & programa do evento.

Instrumental Fado: a generative interactive system

Fado was listed as UNESCO Intangible Cultural Heritage in 2011. This dissertation describes a theoretical model, as well as an automatic system, able to generate instrumental music based on the musics and vocal sounds typically associated with fado’s practice. A description of the phenomenon of fado, its musics and vocal sounds, based on ethnographic, historical sources and empirical data is presented. The data includes the creation of a digital corpus, of musical transcriptions, identified as fado, and statistical analysis via music information retrieval techniques. The second part consists in the formulation of a theory and the coding of a symbolic model, as a proof of concept, for the automatic generation of instrumental music based on the one in the corpus.

Ciência e Universidade na I República

A reforma do ensino superior que se seguiu à implantação da I República impôs modificações estruturais na conjuntura científica nacional. O Estado republicano incumbiu então as universidades e os estabelecimentos de ensino superior da promoção da investigação científica, reconhecendo-lhes um papel central na modernização da ciência nacional. Promoveu um processo de concentração, sob tutela universitária, de vários estabelecimentos científicos autónomos e de modernização dos gabinetes e dos laboratórios de ensino universitários. Estas medidas permitiram o arranque da investigação científica moderna, prática que progressivamente se complexificaria, quer a nível institucional, quer humano, exigindo mudanças importantes no sector, nomeadamente pela organização de um instituto autónomo de coordenação da actividade científica. Neste sentido pretende-se analisar o processo de institucionalização da investigação científica na universidade, tendo em consideração os métodos de reprodução e especialização, os ritmos específicos do seu desenvolvimento, os espaços e os actores e as várias interdependências com as conjunturas política, económica, social e cultural.

Antropologia Funerária e Paleobiologia das Populações Pós-Medievais Portuguesas: Os Casos de Nossa Senhora da Anunciada e Espírito Santo

As desigualdades sociais na saúde constituem a problemática abordada nesta dissertação, tendo sido escolhidas para explorar esta questão duas séries esqueléticas – igreja de Nossa Senhora da Anunciada (Setúbal) e capela do Espírito Santo (Loures) – cronologicamente enquadradas no período pós-medieval, entre os séculos XVI e XIX, e cujos indivíduos apresentavam estatutos socioeconómicos diferenciados. Na concretização deste objectivo foi realizada uma primeira abordagem que incidiu no estudo integral – contexto funerário e Paleobiologia – das respectivas séries. Do manancial de resultados obtidos foram seleccionados e explorados na segunda abordagem indicadores de estatuto social e de estatuto biológico (ou esqueléticos de stress fisiológico) capazes de responder à problemática enunciada, procurando demonstrar-se que as desigualdades sociais podem actuar sobre factores fundamentais ao desenvolvimento normal e saúde dos indivíduos, manifestando-se, consequentemente, de forma diferencial entre indivíduos de estatutos socioeconómicos contrastantes. A caracterização geral do contexto funerário revelou que no interior da igreja de N. Sra. da Anunciada, localizada no bairro do Troino, habitado por um segmento da população socialmente mais desfavorecido, registaram-se 93 inumações primárias e 155 secundárias, as quais foram realizadas em covas abertas no subsolo e revelando a quase ausência de espólio votivo e de caixão. Por outro lado, na capela do Espírito Santo foram exumadas 46 inumações primárias e 30 secundárias que foram exclusivamente encontradas em criptas, tendo os indivíduos sido inumados em caixão e identificando-se, igualmente, a presença de espólio votivo associado. A documentação histórica refere o nome de mecenas e benfeitores do respectivo convento com direito a sepultura na sua capela. Na caracterização paleobiológica geral foram revelados os perfis biológicos básicos, tendo sido identificados indivíduos de ambos os sexos e diferentes classes etárias, constatando-se em ambas séries esqueléticas a predominância de indivíduos do sexo feminino. A análise morfológica evidenciou os caracteres discretos e métricos, bem como a estatura dos indivíduos, sendo esta última, igualmente, referida no estudo das desigualdades sociais. Por fim, o estudo paleopatológico revelou a presença de diversas alterações dentárias e ósseas, incluindo condições enquadradas nos indicadores esqueléticos de stress fisiológico. Na segunda abordagem que se centrou no objectivo específico desta investigação, os indicadores de estatuto social – local de inumação, caixão e espólio votivo – mostraram uma associação dos indivíduos com o seu estatuto socioeconómico clara e inequívoca, enquanto os indicadores esqueléticos de stress fisiológico – crescimento, estatura, cáries, perda de dentes ante mortem, hiperostose porótica, cribra orbitalia, hipoplasias lineares do esmalte dentário, formação de osso novo bilateral nas tíbias, fracturas, osteoartrose, discartrose, alterações nas áreas das enteses e DISH – revelaram que a sua interpretação é muito complexa. Concluiu-se que a interpretação das desigualdades sociais na saúde com base em indicadores de estatuto biológico deve ser prudente, já que não é evidente uma associação ii directa com o estatuto socioeconómico dos indivíduos. Esta investigação corroborou a informação histórica e arqueológica que permite aludir ao estatuto socioeconómico dos indivíduos destas séries esqueléticas, mas a associação deste estatuto a uma saúde diferenciada entre grupos revelou-se inconclusiva.

Improving the early diagnostic of prostate cancer by multiple biomarker detection with new biosensing devices

Prostate cancer (PCa) is the most common form of cancer in men, in Europe (World Health Organization data). The most recent statistics, in Portuguese territory, confirm this scenario, which states that about 50% of Portuguese men may suffer from prostate cancer and 15% of these will die from this condition. Its early detection is therefore fundamental. This is currently being done by Prostate Specific Antigen (PSA) screening in urine but false positive and negative results are quite often obtained and many patients are sent to unnecessary biopsy procedures. This early detection protocol may be improved, by the development of point-of-care cancer detection devices, not only to PSA but also to other biomarkers recently identified. Thus, the present work aims to screen several biomarkers in cultured human prostate cell lines, serum and urine samples, developing low cost sensors based on new synthetic biomaterials. Biomarkers considered in this study are the following: prostate specific antigen (PSA), annexin A3 (ANXA3), microseminoprotein-beta (MSMB) and sarcosine (SAR). The biomarker recognition may occurs by means of molecularly imprinted polymers (MIP), which are a kind of plastic antibodies, and enzymatic approaches. The growth of a rigid polymer, chemically stable, using the biomarker as a template allows the synthesis of the plastic antibody. MIPs show high sensitivity/selectivity and present much longer stability and much lower price than natural antibodies. This nanostructured material was prepared on a carbon solid. The interaction between the biomarker and the sensing-material produces electrical signals generating quantitative or semi-quantitative data. These devices allow inexpensive and portable detection in point-of-care testing.

Bioproduction of succinic acid from renewable feedstocks by Actinobacillus succinogenes 130Z

Succinic acid (SA) is a highly versatile building block that is used in a wide range of industrial applications. The biological production of succinic acid has emerged in the last years as an efficient alternative to the chemical production based on fossil fuels. However, in order to fully replace the competing petro-based chemical process from which it has been produced so far, some challenges remain to be surpassed. In particular, one main obstacle would be to reduce its production costs, mostly associated to the use of refined sugars. The present work is focused on the development of a sustainable and cost-e↵ective microbial production process based on cheap and renewable resources, such as agroindustrial wastes. Hence, glycerol and carob pods were identified as promising feedstocks and used as inexpensive carbon sources for the bioproduction of succinic acid by Actinobacillus succinogenes 130Z, one of the best naturally producing strains. Even though glycerol is a highly available carbon source, as by-product of biodiesel production, its consumption by A. succinogenes is impaired due to a redox imbalance during cell growth. However, the use of an external electron acceptor such as dimethylsulfoxide (DMSO) may improve glycerol metabolism and succinic acid production by this strain. As such, DMSO was tested as a co-substrate for glycerol consumption and concentrations of DMSO between 1 and 4% (v/v) greatly promoted glycerol consumption and SA production by this biocatalyst. Aiming at obtaining higher succinic acid yield and production rate, batch and fed-batch experiments were performed under controlled cultivation conditions. Batch experiments resulted in a succinic acid yield on glycerol of 0.95 g SA/g GLY and a production rate of 2.13 g/L.h, with residual production of acetic and formic acids. In fed-batch experiment, the SA production rate reached 2.31 g/L.h, the highest value reported in the literature for A. succinogenes using glycerol as carbon source. DMSO dramatically improved the conversion of glycerol by A. succinogenes and may be used as a co-substrate, opening new perspectives for the use of glycerol by this biocatalyst. Carob pods, highly available in Portugal as a residue from the locust bean gum industry, contain a significant amount of fermentable sugars such as sucrose, glucose and fructose and were also used as substrate for succinic acid production. Sugar extraction from raw and roasted carobs was optimized varying solid/water ratio and extraction time, maximizing sugar recovery while minimizing the extraction of polyphenols. Kinetic studies of glucose, fructose and sucrose consumption by A. succinogenes as individual carbon sources till 30 g/L were first determined to assess possible metabolic diferences. Results showed no significant diferences related to sugar consumption and SA production between the diferent sugars. Carob pods water extracts were then used as carbon source during controlled batch cultivations. (...)

User-centric product derivation in software product lines

Software Product Line (SPL) engineering aims at achieving efficient development of software products in a specific domain. New products are obtained via a process which entails creating a new configuration specifying the desired product’s features. This configuration must necessarily conform to a variability model, that describes the scope of the SPL, or else it is not viable. To ensure this, configuration tools are used that do not allow invalid configurations to be expressed. A different concern, however, is making sure that a product addresses the stakeholders’ needs as best as possible. The stakeholders may not be experts on the domain, so they may have unrealistic expectations. Also, the scope of the SPL is determined not only by the domain but also by limitations of the development platforms. It is therefore possible that the desired set of features goes beyond what is possible to currently create with the SPL. This means that configuration tools should provide support not only for creating valid products, but also for improving satisfaction of user concerns. We address this goal by providing a user-centric configuration process that offers suggestions during the configuration process, based on the use of soft constraints, and identifying and explaining potential conflicts that may arise. Suggestions help mitigating stakeholder uncertainty and poor domain knowledge, by helping them address well known and desirable domain-related concerns. On the other hand, automated conflict identification and explanation helps the stakeholders to understand the trade-offs required for realizing their vision, allowing informed resolution of conflicts. Additionally, we propose a prototype-based approach to configuration, that addresses the order-dependency issues by allowing the complete (or partial) specification of the features in a single step. A subsequent resolution process will then identify possible repairs, or trade-offs, that may be required for viabilization.

Study of AC losses in medium-sized high temperature superconducting coils

The study of AC losses in superconducting pancake coils is of utmost importance for the development of superconducting devices. Due to different technical difficulties this study is usually performed considering one of two approaches: considering superconducting coils of few turns and studying AC losses in a large frequency range vs. superconducting coils with a large number of turns but measuring AC losses only in low frequencies. In this work, a study of AC losses in 128 turn superconducting coils is performed, considering frequencies ranging from 50 Hz till 1152 Hz and currents ranging from zero till the critical current of the coils. Moreover, the study of AC losses considering two different simultaneous harmonic components is also performed and results are compared to the behaviour presented by the coils when operating in a single frequency regime. Different electrical methods are used to verify the total amount of AC losses in the coil and a simple calorimetric method is presented, in order to measure AC losses in a multi-harmonic context. Different analytical and numerical methods are implemented and/or used, to design the superconducting coils and to compute the total amount of AC losses in the superconducting system and a comparison is performed to verify the advantages and drawbacks of each method.

Medium access control design for distributed opportunistic radio networks

Existing wireless networks are characterized by a fixed spectrum assignment policy. However, the scarcity of available spectrum and its inefficient usage demands for a new communication paradigm to exploit the existing spectrum opportunistically. Future Cognitive Radio (CR) devices should be able to sense unoccupied spectrum and will allow the deployment of real opportunistic networks. Still, traditional Physical (PHY) and Medium Access Control (MAC) protocols are not suitable for this new type of networks because they are optimized to operate over fixed assigned frequency bands. Therefore, novel PHY-MAC cross-layer protocols should be developed to cope with the specific features of opportunistic networks. This thesis is mainly focused on the design and evaluation of MAC protocols for Decentralized Cognitive Radio Networks (DCRNs). It starts with a characterization of the spectrum sensing framework based on the Energy-Based Sensing (EBS) technique considering multiple scenarios. Then, guided by the sensing results obtained by the aforementioned technique, we present two novel decentralized CR MAC schemes: the first one designed to operate in single-channel scenarios and the second one to be used in multichannel scenarios. Analytical models for the network goodput, packet service time and individual transmission probability are derived and used to compute the performance of both protocols. Simulation results assess the accuracy of the analytical models as well as the benefits of the proposed CR MAC schemes.

Rely-guarantee protocols for safe interference over shared memory

Mutable state can be useful in certain algorithms, to structure programs, or for efficiency purposes. However, when shared mutable state is used in non-local or nonobvious ways, the interactions that can occur via aliases to that shared memory can be a source of program errors. Undisciplined uses of shared state may unsafely interfere with local reasoning as other aliases may interleave their changes to the shared state in unexpected ways. We propose a novel technique, rely-guarantee protocols, that structures the interactions between aliases and ensures that only safe interference is possible. We present a linear type system outfitted with our novel sharing mechanism that enables controlled interference over shared mutable resources. Each alias is assigned separate, local roles encoded in a protocol abstraction that constrains how an alias can legally use that shared state. By following the spirit of rely-guarantee reasoning, our rely-guarantee protocols ensure that only safe interference can occur but still allow many interesting uses of shared state, such as going beyond invariant and monotonic usages. This thesis describes the three core mechanisms that enable our type-based technique to work: 1) we show how a protocol models an alias’s perspective on how the shared state evolves and constrains that alias’s interactions with the shared state; 2) we show how protocols can be used while enforcing the agreed interference contract; and finally, 3) we show how to check that all local protocols to some shared state can be safely composed to ensure globally safe interference over that shared memory. The interference caused by shared state is rooted at how the uses of di↵erent aliases to that state may be interleaved (perhaps even in non-deterministic ways) at run-time. Therefore, our technique is mostly agnostic as to whether this interference was the result of alias interleaving caused by sequential or concurrent semantics. We show implementations of our technique in both settings, and highlight their di↵erences. Because sharing is “first-class” (and not tied to a module), we show a polymorphic procedure that enables abstract compositions of protocols. Thus, protocols can be specialized or extended without requiring specific knowledge of the interference produce by other protocols to that state. We show that protocol composition can ensure safety even when considering abstracted protocols. We show that this core composition mechanism is sound, decidable (without the need for manual intervention), and provide an algorithm implementation.

Wideband CMOS low noise amplifiers

Modern fully integrated receiver architectures, require inductorless circuits to achieve their potential low area, low cost, and low power. The low noise amplifier (LNA), which is a key block in such receivers, is investigated in this thesis. LNAs can be either narrowband or wideband. Narrowband LNAs use inductors and have very low noise figure, but they occupy a large area and require a technology with RF options to obtain inductors with high Q. Recently, wideband LNAs with noise and distortion cancelling, with passive loads have been proposed, which can have low NF, but have high power consumption. In this thesis the main goal is to obtain a very low area, low power, and low-cost wideband LNA. First, it is investigated a balun LNA with noise and distortion cancelling with active loads to boost the gain and reduce the noise figure (NF). The circuit is based on a conventional balun LNA with noise and distortion cancellation, using the combination of a common-gate (CG) stage and common-source (CS) stage. Simulation and measurements results, with a 130 nm CMOS technology, show that the gain is enhanced by about 3 dB and the NF is reduced by at least 0.5 dB, with a negligible impact on the circuit linearity (IIP3 is about 0 dBm). The total power dissipation is only 4.8 mW, and the active area is less than 50 x 50 m2 . It is also investigated a balun LNA in which the gain is boosted by using a double feedback structure.We propose to replace the load resistors by active loads, which can be used to implement local feedback loops (in the CG and CS stages). This will boost the gain and reduce the noise figure (NF). Simulation results, with the same 130 nm CMOS technology as above, show that the gain is 24 dB and NF is less than 2.7 dB. The total power dissipation is only 5.4 mW (since no extra blocks are required), leading to a figure-of-merit (FoM) of 3.8 mW