Striatal and extrastriatal atrophy in Huntington's disease and its relationship with length of the CAG repeat

Huntington's disease (HD) is an autosomal dominant neurodegenerative disorder that affects the striatum most severely. However, except for juvenile forms, relative preservation of the cerebellum has been reported. The objective of the present study was to perform MRI measurements of caudate, putamen, cerebral, and cerebellar volumes and correlate these findings with the length of the CAG repeat and clinical parameters. We evaluated 50 consecutive patients with HD using MRI volumetric measurements and compared them to normal controls. Age at onset of the disease ranged from 4 to 73 years (mean: 43.1 years). The length of the CAG repeat ranged from 40 to 69 (mean: 47.2 CAG). HD patients presented marked atrophy of the caudate and putamen, as well as reduced cerebellar and cerebral volumes. There was a significant correlation between age at onset of HD and length of the CAG repeat, as well as clinical disability and age at onset. The degree of basal ganglia atrophy correlated with the length of the CAG repeat. There was no correlation between cerebellar or cerebral volume and length of the CAG repeat. However, there was a tendency to a positive correlation between duration of disease and cerebellar atrophy. While there was a negative correlation of length of the CAG repeat with age at disease onset and with striatal degeneration, its influence on extrastriatal atrophy, including the cerebellum, was not clear. Extrastriatal atrophy occurs later in HD and may be related to disease duration.

Identification of fungemia agents using the polymerase chain reaction and restriction fragment length polymorphism analysis

Prompt and specific identification of fungemia agents is important in order to define clinical treatment. However, in most cases conventional culture identification can be considered to be time-consuming and not without errors. The aim of the present study was to identify the following fungemia agents: Candida albicans, Candida parapsilosis, Candida tropicalis, Candida glabrata, Cryptococcus neoformans, Cryptococcus gattii, and Histoplasma capsulatum using the polymerase chain reaction and restriction fragment length polymorphism analysis (PCR/RFLP). More specifically: a) to evaluate 3 different amplification regions, b) to investigate 3 different restriction enzymes, and c) to use the best PCR/RFLP procedure to indentify 60 fungemia agents from a culture collection. All 3 pairs of primers (ITS1/ITS4, NL4/ITS5 and Primer1/Primer2) were able to amplify DNA from the reference strains. However, the size of these PCR products did not permit the identification of all the species studied. Three restriction enzymes were used to digest the PCR products: HaeIII, Ddel and Bfal. Among the combinations of pairs of primers and restriction enzymes, only one (primer pair NL4/ITS5 and restriction enzyme Ddel) produced a specific RFLP pattern for each microorganism studied. Sixty cultures of fungemia agents (selected from the culture collection of Fundação de Medicina Tropical do Amazonas - FMTAM) were correctly identified by PCR/RFLP using the prime pair NL4/ITS5 and Ddel. We conclude that the method proved to be both simple and reproducible, and may offer potential advantages over phenotyping methods.

Production of medium-chain-length polyhydroxyalkanoate by Pseudomonas oleovorans grown in sugary cassava extract supplemented with andiroba oil

Pseudomonas oleovorans were grown on sugary cassava extracts supplemented with andiroba oil for the synthesis of a mediumchain- length polyhydroxyalkanoate (PHA MCL). The concentration of total sugars in the extract was approximately: 40 g/L in culture 1, 15 g/L in cultures 2 and 3, and 10 g/L in culture 4. Supplementation with 1% andiroba oil and 0.2 g/L of (NH4)2HPO4 was performed 6.5 hours after growth in culture 3, and supplementation with the same amount of andiroba oil and 2.4 g/L of (NH4)2HPO4 was performed at the beginning of growth in culture 4. The synthesis resulted mainly in 3-hydroxy-decanoate and 3-hydroxy-dodecanoate units; 3-hydroxy-butyrate, 3-hydroxy-hexanoate; and 3-hydroxy-octanoate monomers were also produced but in smaller proportions. P. oleovorans significantly accumulated PHA MCL in the deceleration phase of growth with an oxygen limitation but with sufficient nitrogen concentration to maintain cell growth. The sugary cassava extract supplemented with andiroba oil proved to be a potential substrate for PHA MCL production.

Physiological quality evaluation of the radii Schinus terebinthifolius seeds

Schinus terebinthifolius is a native forest species which may be used in recuperating degraded areas and in urban afforestation. In order to evaluate the efficiency of methods for separating lots of S. terebinthifolius seeds into vigor levels, five lots of seeds were qualitatively evaluated for their moisture content, germination, first count, accelerated aging (the traditional and the saturated salt methods), germination speed index, average time of germination and seedling length and dry weight. The results showed that the tests of first germination count, accelerated aging at 41 ºC for 72 hours, average time of germination, seedling length and dry matter permitted the separation of S. terebinthifolius seeds into different vigor levels.

Leveiden keskimerkintöjen liikenneturvallisuusvaikutusten arviointi

Tämän raportin tavoitteena oli käsitellä leveiden keskimerkintöjen liikenneturvallisuusvaikutuksia, toteuttaa mielipidekysely kantatie 54 kokeiluosuuden vaikutusalueella sekä esitellä aiemmin tehdyt tutkimukset ja leveiden keskimerkintöjen taustaa. Raportin on laatinut Eino Lahtinen Hämeen ammattikorkeakoulusta opinnäytetyönään. Työn taustateoriaksi syvennyttiin leveiden keskimerkintöjen historiaan Suomessa ja ulkomailla sekä Suomessa tehtyihin tutkimuksiin aiheesta. Suomessa ja ulkomailla on havaittu jo vuosikymmenten ajan korkealuokkaisten teiden liikenneturvallisuuden heikentyneen liikenteen lisääntyessä. Kohtaamis- ja ohitusonnettomuuksien jäljet ovat usein raakaa katseltavaa ja luettavaa. Huoli kohtaamis- ja ohitusonnettomuuksien määristä ja niiden vakavuuksista painostaa etsimään ratkaisuja tämän kaltaisten onnettomuuksien vähentämiseksi. Tästä syystä on 1980-luvulta lähtien aktiivisesti etsitty liikenneturvallisuutta parantavia kustannustehokkaita ratkaisuja. Visuaalisia vaikutuksia arvioidessa havaittiin jo varhain kaistan leveyden visuaalisen kaventamisen johtavan ajonopeuksien laskuun, joka vähentää onnettomuuksia ja niiden vakavuuksia. Yhdeksi ratkaisuksi esitettiin leveää keskimerkintää, josta on ollut erilaisia kokeiluja ulkomailla 1996 ja Suomessa 2009 lähtien. Työn tuloksena voidaan esittää, että leveiden keskimerkintöjen vaikutukset ajokäyttäytymiseen ovat melko vähäiset, sillä lähes puolet kyselyyn vastanneista ei havainnut muutosta omassa tai muiden ajokäyttäytymisessä. Työn perusteella arvioidaan, että leveät keskimerkinnät vähensivät henkilövahinkoon johtaneita ohitus-, kohtaamis- ja vasemmalle suistumisonnettomuuksia 17 – 21 %. Tutkimuksen perusteella voidaan todeta, että leveitä keskimerkintöjä käytettäessä on varmistuttava riittävästä piennarleveydestä (vähintään 1 m). Leveää keskimerkintää voidaan käyttää alueilla, jossa tien päällysteen leveys on vähintään 10 m, KVL vähintään 1500 ajon/vrk ja tiejakson pituus vähintään 10 km. Leveän keskialueen tulisi olla metrin levyinen.

Optimal Recycling Combination of Ash in South-East Finland

The present world energy production is heavily relying on the combustion of solid fuels like coals, peat, biomass, municipal solid waste, whereas the share of renewable fuels is anticipated to increase in the future to mitigate climate change. In Finland, peat and wood are widely used for energy production. In any case, the combustion of solid fuels results in generation of several types of thermal conversion residues, such as bottom ash, fly ash, and boiler slag. The predominant residue type is determined by the incineration technology applied, while its composition is primarily relevant to the composition of fuels combusted. An extensive research has been conducted on technical suitability of ash for multiple recycling methods. Most of attention was drawn to the recycling of the coal combustion residues, as coal is the primary solid fuel consumed globally. The recycling methods of coal residues include utilization in a cement industry, in concrete manufacturing, and mine backfilling, to name few. Biomass combustion residues were also studied to some extent with forest fertilization, road construction, and road stabilization being the predominant utilization options. Lastly, residues form municipal solid waste incineration attracted more attention recently following the growing number of waste incineration plants globally. The recycling methods of waste incineration residues are the most limited due to its hazardous nature and varying composition, and include, among others, landfill construction, road construction, mine backfilling. In the study, environmental and economic aspects of multiple recycling options of thermal conversion residues generated within a case-study area were studied. The case-study area was South-East Finland. The environmental analysis was performed using an internationally recognized methodology — life cycle assessment. Economic assessment was conducted applying a widely used methodology — cost-benefit analysis. Finally, the results of the analyses were combined to enable easier comparison of the recycling methods. The recycling methods included the use of ash in forest fertilization, road construction, road stabilization, and landfill construction. Ash landfilling was set as a baseline scenario. Quantitative data about the amounts of ash generated and its composition was obtained from companies, their environmental reports, technical reports and other previously published literature. Overall, the amount of ash in the case-study area was 101 700 t. However, the data about 58 400 t of fly ash and 35 100 t of bottom ash and boiler slag were included in the study due to lack of data about leaching of heavy metals in some cases. The recycling methods were modelled according to the scientific studies published previously. Overall, the results of the study indicated that ash utilization for fertilization and neutralization of 17 600 ha of forest was the most economically beneficial method, which resulted in the net present value increase by 58% compared to ash landfilling. Regarding the environmental impact, the use of ash in the construction of 11 km of roads was the most attractive method with decreased environmental impact of 13% compared to ash landfilling. The least preferred method was the use of ash for landfill construction since it only enabled 11% increase of net present value, while inducing additional 1% of negative impact on the environment. Therefore, a following recycling route was proposed in the study. Where possible and legally acceptable, recycle fly and bottom ash for forest fertilization, which has strictest requirements out of all studied methods. If the quality of fly ash is not suitable for forest fertilization, then it should be utilized, first, in paved road construction, second, in road stabilization. Bottom ash not suitable for forest fertilization, as well as boiler slag, should be used in landfill construction. Landfilling should only be practiced when recycling by either of the methods is not possible due to legal requirements or there is not enough demand on the market. Current demand on ash and possible changes in the future were assessed in the study. Currently, the area of forest fertilized in the case-study are is only 451 ha, whereas about 17 600 ha of forest could be fertilized with ash generated in the region. Provided that the average forest fertilizing values in Finland are higher and the area treated with fellings is about 40 000 ha, the amount of ash utilized in forest fertilization could be increased. Regarding road construction, no new projects launched by the Center of Economic Development, Transport and the Environment in the case-study area were identified. A potential application can be found in the construction of private roads. However, no centralized data about such projects is available. The use of ash in stabilization of forest roads is not expected to increased in the future with a current downwards trend in the length of forest roads built. Finally, the use of ash in landfill construction is not a promising option due to the reducing number of landfills in operation in Finland.

Trends in fish prey capture by common terns following zebra mussel invasion : do terns track fish species abundance? /

The Common Tern (Sterna hirundo) is a ground nesting colonial seabird. Terns rely primarily on small prey fishes which they obtain through plunge diving for their survival as well as the survival of their offspring during the breeding season. The zebra mussel (Dreissena polymorpha) is a small bivalve mollusk that invaded North American waters in the late 1980's. Through its suspension feeding, the zebra mussel has the ability to alter the entire aquatic ecosystem, ultimately leading to a reduction in pelagic organisms including small prey fish. The objective of the study was to determine what (if any) indirect effects the invasion of the zebra mussel has had on fish prey captured by terns. The study took place in two separate two-year periods, 1990-91 and 1995-96 on a concrete breakwall off the north shore of Lake Erie near Port Colborne, Ontario. Daily nest checks revealed clutch initiation dates, egg-laying chronology, hatching success and morphological egg characteristics (length and breadth). Behavioural observations included time each sex spent in attendance with its brood, the frequency of feeding chicks and the prey species composition and size fed to chicks as well as to females (courtship feeding). Egg sizes did not differ between study periods, nor did feeding rates to chicks, suggesting that food was not a limiting resource. Terns spent less time with their broods (more time foraging) in the 1995-96 period. However, they also had significantly larger broods and fledged more offspring. The time of each individual foraging trip decreased, suggesting that fish were easier to obtain in 1995 and 1996. Lastly, kleptoparasitism rates decreased, suggesting that the costs of foraging (time, energy) actually decreased as fewer birds adopted this strategy to compensate for what I assumed to be a lack of available food (fish). The only significant difference between the periods of 1990, 1991 and 1995, 1996 was a change in diet. Terns delivered significantly fewer rainbow smelt and more emerald shiner in 1995 and 1996. However, the average size of fish delivered did not change. Thus, there was little impact on prey captured by Common Terns in Lake Erie since the invasion of the zebra mussel.

Anaerobic performance in ice hockey : the effect of skate blade radius of hollow

The purpose of the study was to investigate the effect of skate blade radius of hollow (ROH) on anaerobic performance, specifically during the acceleration and stopping phases of an on-ice skating test. Fifteen, male Junior B hockey players (mean age 19 y ± 1.46) were recruited to participate. On-icc testing required each participant to complete an on-ice anaerobic performance test [Reed Repeat Skate (RRS)) on three separate days. During each on-ice test, the participant's skate blades were sharpened to one of three, randomly assigned, ROH values (0.63 cm, 1.27 cm, 1.90 cm). Performance times were recorded during each RRS and used to calculate anaerobic variables [anaerobic power (W), anaerobic capacity (W), and fatigue index (s, %)). Each RRS was video recorded for the purpose of motion analysis. Video footage was imported into Peak Motus™ to measure kinematic variables of the acceleration and stopping phases. The specific variables calculated from the acceleration phase were: average velocity over 6 m (m/s), average stride length (m), and mean stride rate (strides/s). The specific variables calculated from the stopping phase were: velocity at initiation of stopping (rn/s), stopping distance (m), stopping time (s). A repeated measures ANOV A was used to assess differences in mean performance and kinematic variables across the three selected hollows. Further analysis was conducted to assess differences in trial by trial performance and kinematic variables for all hollows. The primary findings of the study suggested that skate blade ROH can have a significant effect on kinematic variables, namely stride length and stride rate during the acceleration phase and stopping distance and stopping time during the stopping phase of an on-ice anaerobic performance test. During the acceleration phase, no significant difdifferences were found in SR and SL across the three selected hollows. Mean SR on the 1.27 cm hollow was significantly slower than both the 0.63 cm and 1.90 cm hollows and SL was significantly longer when skating on the 1.27 cm hollow in comparison to the 1.90 cm hollow. During the stopping phase, stopping distance on the 0.63 cm hollow (4.12 m ± 0.14) was significantly shorter than both the 1.27 cm hollow (4.43 m ± 0.08) (p < 0.05) and the 1.90 cm ho])ow (4.35 m ± 0.12) (p < 0.05). Mean ST was also significantly shorter when stopping on the 0.63 cm hollow then both the 1.27 cm and 1.90 cm hollows. Trial by trial results clearly illustrated the affect of fatigue on kinematic variables; AV, SR, IV decreased from trial 1 to 6. There was no significant effect on anaerobic performance variables during the RRS. Altering the skate blade ROH has a significant and practical affect on accelerating and stopping performance will be discussed in this paper.

Textual characteristics of coarse sediments in selected streams of the Niagara Peninsula, Ontario

The streams flowing through the Niagara Escarpment are paved by coarse carbonate and sandstone sediments which have originated from the escarpment units and can be traced downstream from their source. Fifty-nine sediment samples were taken from five streams, over distances of 3,000 to 10,000 feet (915 to 3050 m), to determine downstream changes in sediment composition, textural characteristics and sorting. In addition, fluorometric velocity measurements were used in conjunction with measured -discharge and flow records to estimate the frequency of sediment movement. The frequency of sediments of a given lithology changes downstream in direct response to the outcrop position of the formations in the channels. Clasts derived from a single stratigraphic unit usually reach a maximum frequency within the first 1,000 feet (305 m) of transport. Sediments derived from formations at the top of waterfalls reach a modal frequency farther downstream than material originating at the base of waterfalls. Downstream variations in sediment size over the lengths of the study reaches reflect the changes in channel morphology and lithologic composition of the sediment samples. Linear regression analyses indicate that there is a decrease in the axial lengths between the intial and final samples and that the long axis decreases in length more rapidly than the intermediate, while the short axis remains almost constant. Carbonate sediments from coarse-grained, fossiliferous units - iii - are more variable in size than fine-grained dolostones and sandstones. The average sphericity for carbonates and sandstones increases from 0.65 to 0.67, while maximum projection sphericity remains nearly constant with an average value of 0.52. Pebble roundness increases more rapidly than either of the sphericity parameters and the sediments change from subrounded to rounded. The Hjulstrom diagram indicates that the velocities required to initiate transport of sediments with an average intermediate diameter of 10 cm range from 200 cm/s to 300 cm/s (6.6 ft./sec. to 9.8 ft./sec.). From the modal velocitydischarge relations, the flows corresponding to these velocities are greater than 3,500 cfs (99 m3s). These discharges occur less than 0.01 p~r cent (0.4 days) of the time and correspond to a discharge occurring during the spring flood.

Y works : average hours worked and average salaries

Generation Y is entering the workforce in large numbers and, because this generation holds different values than previous generations, accounting firms are having difficulty managing these new hires. I t is important to determine whether Generation Y is associated with meaningful, long-term trends or i f they will adapt to the given situation. Gen Y' s association with average hours worked per person and average salaries in the Canadian Accounting, Marketing, and Legal professions is examined. I find that an increasing percentage of Generation Y employees in the workforce is associated with significant decreases in average hours worked, but is not associated with any significant trend in average salary. I t is concluded that Generation Y is associated with changing trends in the workplace. These trends are contrary to wha t might be expected under traditional definitions of success, therefore it is postulated that Gen Y may view workplace success differently than previous generations.

THE INFLUENCE OF LENGTH CHANGE SPEED AND DIRECTION ON DYNAMIC FUNCTION POTENTIATION IN FAST MOUSE MUSCLE

The purpose of this study was to test the hypothesis that the potentiation of dynamic function was dependent upon both length change speed and direction. Mouse EDL was cycled in vitro (25º C) about optimal length (Lo) with constant peak strain (± 2.5% Lo) at 1.5, 3.3 and 6.9 Hz before and after a conditioning stimulus. A single pulse was applied during shortening or lengthening and peak dynamic (concentric or eccentric) forces were assessed at Lo. Stimulation increased peak concentric force at all frequencies (range: 19 ± 1 to 30 ± 2%) but this increase was proportional to shortening speed, as were the related changes to concentric work/power (range: -15 ± 1 to 39 ± 1 %). In contrast, stimulation did not increase eccentric force, work or power at any frequency. Thus, results reveal a unique hysteresis like effect for the potentiation of dynamic output wherein concentric and eccentric forces increase and decrease, respectively, with work cycle frequency.

Average White Band poster, ca. 2000

The Average White Band's debut album, Show your hand, was released in 1973. The "classic funk and R & B" band included members Alan Gorrie, Owen "Onnie" McIntyre, Malcolm "Mollie" Duncan, Roger Ball, Robbie McIntosh, and Mike Rosen. Rosen was quickly replaced by Hamish Stuart. The band, comprised of Scotsmen, released a second album in 1974 that featured the US number 1/UK Top 10 single "Pick up the Pieces". That same year, Robbie McIntosh died of a heroin overdose and was replaced by Steve Ferrone. The song "Cut the Cake" from their third album made the US top 10, and subsequent releases in the late 1970s and early 1980s proved successful. The members largely pursued individual projects in the years that followed, but re-formed in 1989 (with original members Gorrie, Ball and McIntyre, and new members Alex Ligertwood and Eliot Lewis) and released the album Aftershock. Over the years, the band's members have changed, and the band is currently comprised of Onnie McIntyre, Rocky Bryant, Alan Gorrie, Fred "Freddy V" Vigdor and Klyde Jones. Their most recent album, Times Squared, was released in 2009.

THE INFLUENCE OF LENGTH CHANGE SPEED AND DIRECTION ON DYNAMIC FUNCTION POTENTIATION IN FAST MOUSE MUSCLE

The purpose of this study was to test the hypothesis that the potentiation of dynamic function was dependent upon both length change speed and direction. Mouse EDL was cycled in vitro (250 C) about optimal length (Lo) with constant peak strain (± 2.5% Lo) at 1.5,3.3 and 6.9 Hz before and after a conditioning stimulus. A single pulse was applied during shortening or lengthening and peak dynamic (concentric or eccentric) forces were assessed at Lo. Stimulation increased peak concentric force at all frequencies (range: 19±1 to 30 ± 2%) but this increase was proportional to shortening speed, as were the related changes to concentric work/power (range: -15 ± 1 to 39 ± 1 %). In contrast, stimulation did not increase eccentric force, work or power at any frequency. Thus, results reveal a unique hysteresis like effect for the potentiation of dynamic output wherein concentric and eccentric forces increase and decrease, respectively, with work cycle frequency.

Photograph - Margaret Julia Woodruff Band (Full Length Photograph)

Black and white photograph, 24 cm x 16 cm, of Margaret Julia Woodruff Band. This is a full length photograph in which she is wearing a lace dress. The photo was taken by Dudley Hoyt of New York.

Horseshoe Falls from Above, U.S.A.

The description reads "(39) Tireless Niagara - Horseshoe Falls from above - U.S.A.". The reverse states "We are standing on the Canadian side of the river, looking S.E. across the enormous curve of the Horseshoe toward the Dufferin Islands on the Canadian side. 'This is close enough. The time will come undoubtedly when no man can reach this point, when the rocks on which we stand will break and crash into the gulf above which they hang. Table Rock one of the best known points about Niagara in the past, used to extend out over the river from the bank just behind us. It was originally very large but great masses, sometimes a hundred feet in length by fifty in width, have broken off at different periods, the last in 1883, until the whole rock is gone. Off to our left is the centre of the Horseshoe. It is easy to see that in that direction the water is going over in a solid mass, thousands of tons each second, to the river 150 feet below. While the amount of water passing over these rocks varies somewhat according to the height of the river. It has been estimated that the average amount is 12,000,000 cubic feet per minute, that is, about 375,000 tons...Since 1842 the whole contour of these falls has been worn away at the rate of about 2 1/10 ft. per year. In the centre of the Horseshoe where the bulk of the water passes, nearly five feet of rock are worn away each year. The falls have receded 100 feet within the memory of the men now living.' From Niagara Through the Stereoscope, with special 'keyed' maps, published by Underwood & Underwood"