A expansão do setor sucroenergético no estado de São Paulo

The changes occurring in Brazilian agriculture, with the inclusion of agro-industrial activities in your mode of production, must be analyzed to verify the changes in the behavior of territorial dynamics. Through changing the Rural Complex, traditional for the Agroindustrial Complex tightly integrated with trade and industry brought many consequences for the rural population, with regard to employment. Understanding this transformation capitalist the field is needed to analyze the actors involved in this process and the policies adopted for the expansion of sugar and ethanol activity in the State of São Paulo and the consequences for the spatial organization. The expansion of cane production areas were governed by the Institute of Sugar and Alcohol (IAA), the National Alcohol Program (PROÁLCOOL) Development Plan for the West of São Paulo - PRO-WEST and Expansion Program for the production of Canavicultura for production of fuel for the State of São Paulo (PROCANA). The occupation of these agroindustrial facilities in rural spaces contextualized by territorialization of the rural complex, in that sense, understanding these concepts is a key part development in the research. therefore, are concepts of fundamental importance to geographical science, and interpreting their function and construction in rural spaces

Análise cinemática e dinâmica para conversão de um VW saveiro em veículo elétrico

This work aims to kinematic and dynamic analysis of a VW Saveiro in order to estimate the power requested to the engine with the imposed movement conditions. Thus, the study will be the basis to the specification of the electric engine, on the conversion of the internal combustion vehicle into electric one. First of all, a literature review was done in order to understand the state of the art for this issue and come up with the technical features of the vehicle in question. The next step is the identification and calculation of all forces acting on the prototype in motion, from 0 to 120 km/h, in intervals of 10 km/h, under the defined conditions of path and time. Then, were determined the values of the torque and rotation of the components from the transmission system, as well as the engine power, for each speed range. The results show the most influential forces on the resistence of the movement in each speed range, and the behavior of the torque curve is verified. Finally, it was also analyzed the implementation of pinwheels on the frontal area of the vehicle, in order to convert wind energy into electrical energy to supply the lighting subsystem of the vehicle and the proposal was validated. Limiting the maximum speed of the vehicle to 90 km/h, it was finally concluded that the power of the electric engine should be 40 HP

Analise de defeitos em motores através de vibração mecânica: estudo de caso

Revolving machines are among the most used equipment in general industry and therefore expenditures on this equipment class are a significant portion of the total amount spent by the company. If there is an unscheduled stop of some of this equipment, industrial plants can lose huge amounts of money caused by interrupted production and parts delay. Others may increase significantly maintenance costs due to consequences elsewhere not affected before. Even plant and people safety can be in danger if there is an operation interruption without a backup system start. This work is focused on a rotating system case study which is monitored by vibration analysis that shows that is possible to determine when is the most appropriate time for equipment intervention without any reliability loss just by using a simple and cheap system which is not much used because professionals are not aware to its utility. Industrial facilities were evaluated by fail detection and historical analysis in some equipment in order to show feasibility of vibration analysis through a before-during-after process. The plant evaluated is part of a chemical multinational located in Guaratinguetá-SP. At this time, that plant had around 650 critical equipment monthly monitored and no unscheduled shutdown was registered in one year period due to equipment monitoring

Análises de solos e sedimentos de corrente, nas áreas das usinas de fundição de chumbo do Calabouço (CIEM-CPRM) e de beneficiamento de minério aurífero do Morro do Ouro (Parque Municipal Morro do Ouro), no município de Apiaí - SP

Located in Apiaí, Vale do Ribeira, southern region of São Paulo state, the Usina do Calabouço areas (CIEM / CPRM) and Morro do Ouro (Parque Municipal do Morro do Ouro), were targeted for stud ies due to its old buildings, respectively a foundry in lead ore, called Experimental de Chumbo e Prata (Usina Calabouço), and a gold mine with processing plant of the gold-bearing ore produced there. Nowadays, the areas are used for public visitation, and in both places the rests of the buildings remains. Particularly in the CIEM/CPRM, due to the materials witch was produced before, it can suggest the existence of anomalous amounts of the involved metals (CIEM / CPRM) and possible contaminations by chemical products used in the improvement of the auriferous ore (P. M. Morro do Ouro). These potential contamination were confirmed with geochemical survey of soils and current sediments accomplished in both areas, for the elements arsenic, cadmium, lead, copper, mercury, silver and zinc, which were used as parameters guiding values for soil and groundwater the state of São Paulo (CETESB), and watershed values stipulated by CPRM (poor, background and anomalous), in it rising geochemistry during Folha Apiaí's execution (SG-22-X-B-V).

Análise de desempenho de lâmpadas LEDs e LFCs como alternativas em iluminação residencial em função da implementação da portaria ministerial n° 1007 que limita o uso de lâmpadas incandescentes no Brasil

With the imposition of the suspension of production and subsequent banning of incandescent light bulbs will be necessary to replace it by other more energy-efficient. Although the main alternative is the compact fluorescent lamp, the environmental impact caused by it due to incorrect disposal and the amount of harmonics included in the network resulting in losses related to the quality of electric power system makes them sought new alternatives for lighting systems that are efficient and have low environmental impact. In this context, the LED (Lighting Emitting Diode), based on solid-state components, is presented as an option for new projects and replacement of existing lighting. In this work we studied aspects of energy, environmental and economic impacts of a possible replacement of conventional lighting systems for new technology. From laboratory tests and surveys of the costs of different types of lamps used for residential lighting, we performed a comparative analysis considering energy and economic aspects which showed that the LED technology, but has a high initial investment, it is best when power quality and environmental preservation are relevant factors in decision making for the choice of technology to be used in the lighting system

Sistema fotovoltaico interligado á rede eletrica no Campus da UNESP-FEG Guaratinguetá

Solar energy can be considered the largest source of energy available on earth and has attracted in recent decades, attention and interest for its rational use. The use of energy sources in a sustainable manner is essential to the survival of future generations, due to the scarcity of natural resources and their exploitation in a disorderly way. Studies related to the applications of renewable sources becomes then relevant, given its great importance as regards the conscious use of resources provided by nature, with the least possible impact on it. The present study presents an evaluation of generation potential and feasibility of implementing a solar photovoltaic connected to the grid and connected to the roofs of some buildings of the Faculty of Engineering of Guaratinguetá - FEG, to supply the demand of electric energy consumption on campus and attempting to inject a possible surplus power generation in local power grid, increasing network capacity and reducing peak loads

Estudo sobre a condição de coleta e tratamento de esgoto sanitário do município de Ubatuba-SP

The actual work broaches a study about the collection and treatment of sanitary sewage from the municipality of Ubatuba in its operational aspects and the tariff policy from the service. Themes related to the subject like the history of collection and treatment of sewage, its development in Brazil and its importance for public health and environmental preservation, as well as historical and geographical aspects of Ubatuba/SP, are present in the literature review. The methodology consists in guided visit in the colletion and treatment of sewage facilities and interview with technical managers. With the technical data obtained, it is made a discussion of the results and possible recommendations

Bancos de capacitores se corrente de Inrush

This work discusses about the effects and methods of control and elimination of the currents transients generated by switching capacitor banks, this currents are called inrush currents. Capacitor banks are widely used to compensate a low power factor generated by the widespread use of inductive loads. Currently many of these banks are automatic and therefore the capacitive cells are connected and disconnected according to the inductive loads on the network. However when connecting a capacitor bank to a bus can generate currents transients generated by electromagnetic transients. Aspects of the network, for example, the existence of a bank already connected to the bus, can influence the intensity of this phenomenon. This paper discusses some characteristics of the capacitors and the network to justify and explain the appearance of these transients and discusses its effects on the network and to other equipment. It is concluded that the main cause of this phenomenon is the voltage difference between the capacitor to be connected to the network and the bus, the results of the study were the bases to discuss the traditional methods to mitigate these currents and therefore its negative effects. Although in this paper is yet developed a method of electronic switching that can greatly reduce these transients

Iluminação de exteriores utilizando tecnologia LED: estudo de caso

This Graduate Work aims to exhibit the analyze of the applicability of LED technology in a real outdoor lighting situation, and this project’s illumination solution is compared with the initial proposal, the sodium vapor lamps. What is studied is an outdoor area, like the roads and parking lots of a plant. A light planning software is used for this comparison, and the results are displayed instantly, allowing rapid analysis of the project through a simulation. The medium illuminance is the same in both solutions for this case study and minimum rates set as standard were observed then the analysis are appropriate in this project. Various aspects are considered in order to obtain a comprehensive analysis of this project, such as economic, environmental and quality of lighting. LED technology in outdoor lighting is presented in its infancy, but promising. Solid state lamps show great advantages when compared with other technologies, such as discharge lamps, however there are some disadvantages tied to new products that are expected to be overcome with technological development and increased production

Estudo de capacidade de armazenagem e frota em uma empresadoramo de bebidas

This paper presents a case study in a largebeverage company,which suffers fromlack of inputs. Through 5 Whys analysis,it was possible to find the root causes of the problem: the bad fleet sizing deliveriesand low capacityof storage of inputs. Through the use of simulation, it was possible to determine theactual fleet required, and it was alsoquantified thespace required for thestorage ofloads.Based on these results andconsidering the cost, it waspossible todetermine which the most effective solutions toreducing the initialproblem: the increase of storage capacity, considered the best option, even demanding time, or the increase of the fleet, considered a stopgap measure to partially solve the problem until the first solution is finalized

Manejo pré-abate de bovinos

The pre-slaughter moment begins with the animal´s loading on the farm and ends up in its drain. It is a period in which the animal is under physical stress caused by hunger, thirst, fatigue, injuries, and extremes of temperature and psychological stress, due to restraint, handling, innovation and fear. Stress and inappropriate handling bring bad consequences for the final product´s quality, requiring better handling conditions, facilities and equipment. Examples of consequences of mishandling: meat with abnormal color, DFD meat (dark, firm and dry), reduced product´s shelf life, bruises and broken bones in carcasses. The operators should be trained and oriented on the basic principles of biology, behavior and management of cattle. At every step of the pre-slaughter moment, the animals should be handled calmly and quietly to avoid excitement and stress. Operators should avoid shouting, whistling or any noise since cattle have very sensitive ears and can become stressed. If the animals refuse to move, the cause of the problem should be determined

Centro de Formação de Atletas de Futebol

Devido à falta de intalações para o treinamento e desenvolvimento de equipes locais, Presidente Prudente está novamente perdendo oportunidades de uma evolução, um destaque no cenário do futebol. Com isto, a criação do Centro de Formação de Atletas de Futebol tem como finalidade de melhor atender e aperfeiçoar as habilidades dos atletas com instalações esportivas, mas também tendo estruturas de suporte visando atingir a sua proposta social com a preocupação com o bem estar dos mesmos, ensinamento de valores, áreas de ensino e cuidados médicos. Também, pretende-se desenvolver um trabalho com a comunidade carente, no sentido de proporcionar a prática de futebol recreativo através de projetos sociais atendendo centenas de crianças de diversos municípios da região... (Resumo completo, clicar acesso eletrônico abaixo)

Análise dos efeitos das deformações estruturais sobre a transferência transversal de carga em um veículo do tipo fórmula SAE submetido a uma aceleração lateral constante

This paper studies the frame deformations on a formula SAE vehicle in steady-state cornering and its influence on the lateral load transfers and, consequently, on the tires normal loads due to the applied lateral load. For a vehicle with a perfect rigid frame, the vehicle mass, the position of the center of gravity and the suspensions are the only factors responsible for the load distribution between the tires. When the frame deformations are no longer negligible, the frame deformations affect the loaddistribution between the tires. The frame flexibility turns it able to behave as an additional set of springs to the suspension system, thus changing the behavior of the set. This paper describes howit happens and suggests ways to minimize this phenomenon

Espaço fábrica: intervenção em conjunto de antiga indústria de óleos em Bariri - SP

Discussões a respeito de propostas de intervenção em espaços ur-banos que possuem valores culturais para a comunidade têm sido um tema bastante explorado por arquitetos e urbanistas contemporâneos. Muitos são os teóricos que se ocuparam do assunto – as primeiras teorias de restaura-ção do patrimônio arquitetônico construído datam do século 18 – mas, até hoje, não se pôde estabelecer um consenso sobre como se deve ou não proceder na concepção de projetos dessa natureza. Este trabalho trata de um espaço ocioso na área central do municí-pio de Bariri, interior do estado de São Paulo, onde se deram as atividades de uma indústria de óleos vegetais de grande expressão na cidade, entre as décadas de 1960 a 1980. Mesmo depois de a fábrica ter entrado em proces-so de falência, seus equipamentos e edificações permaneceram no terreno, e, até hoje, parte considerável de seu patrimônio construído ainda continua lá. Porém, nunca se deu outro uso para o espaço, sendo que, atualmente, as instalações se encontram em processo de ruína. Sabe-se que áreas desocu-padas inseridas na malha urbana podem levar a uma degradação do espaço, devido à falta do cuidado mantido pela presença humana, causando, diversas vezes, a perda do controle pelo poder público, e incidentes provocados pela falta de segurança. A Indústria Resegue de Óleos Vegetais (IROV) teve considerável importância histórica para o município, sendo um dos maiores símbolos da atividade econômica dos imigrantes sírios na cidade. Foi responsável pelo emprego de muitos trabalhadores e por grande movimentação financeira na época em que esteve em funcionamento. Além disso, seu espaço físico im-ponente está presente no cognitivo da maioria dos habitantes baririenses, compondo, de maneira significativa, a identidade visual de Bariri. Sendo as-sim, trata-se de uma área de interesse cultural... (Resumo completo, clicar acesso eletrônico abaixo)

Estudo da variação do limite de resistência à tração ao longo da bobina de vergalhão de alumínio 1350 AA

Therebar of aluminum 1350 AA produced by CBA are used inthe manufacture of wires and cables for electric power transmission, which marketshows increasingly favorableto aluminum due to itslow densityand high electrical conductivity, but to ensure that this materialmeets all specifications of projectsfor electricity transmission, it must have homogeneity in the chemicaland mechanicalproperties.One of the points of improvement in the process of rod production isreducing the high variation of the limitof tensile strengthalong the coils, therefore, this work seeks a better understanding of the factors that significantly influence the mechanical properties of rebar, specifically assessing the influence oftemperatureat the output of the coils, which can cause a recovery effect on the material andif thereare relevantdifferences between the two modes of rebar production: auto and manual.Samples of six coils have been specifically produced forthis study, which weresubsequently subjected to different annealing temperatures for one hour and ten minutes, similar to what occurs in the output of the coil from the machine. The tensile tests showed that aluminum 1350 AA is significantly influenced by temperature, whose behavior was very similar to that presented in the literature. It was found that the phenomenon of recovery occurred more significantly at high temperatures. Through the optical electron microscope Zeiss, 18 surface maps were made with 100x magnification for each sample in different conditions and the images were analyzed using entropy and fractal dimension, aiming to relate the condition of surface hardening on mechanical property of the samples in that condition. The results showed that these methods can be applied, provided they do not have any kind of imperfection on the surface, once they can influence the results. The study concluded that a more efficient cooling is required in ... (Complete abstract click electronic access below)