Combined experimental powder X-ray diffraction and DFT data to obtain the lowest energy molecular conformation of friedelin

Friedelin molecular conformers were obtained by Density Functional Theory (DFT) and by ab initio structure determination from powder X-ray diffraction. Their conformers with the five rings in chair-chair-chair-boat-boat, and with all rings in chair, are energy degenerated in gas-phase according to DFT results. The powder diffraction data reveals that rings A, B and C of friedelin are in chair, and rings D and E in boat-boat, conformation. The high correlation values among powder diffraction data, DFT and reported single-crystal data indicate that the use of conventional X-ray diffractometer can be applied in routine laboratory analysis in the absence of a single-crystal diffractometer.

Preparação de derivados do lapachol em meio ácido e em meio básico: uma proposta de experimentos para a disciplina de Química Orgânica Experimental

In this educational paper we describe the extraction of lapachol from its natural source according to acid-base concepts in organic chemistry and the use of its derivatives β-lapachone and hydroxy-hydrolapachol to exemplify intramolecular cyclization, carbocation stability, Michael addition reaction and chromatography. The experiments were performed during three different undergraduate organic chemistry laboratory classes using low cost material, while avoiding color reagents for TLC visualization, as well as small-scale column chromatography to isolate the mixture of lapachol and β-lapachone.

Miniprojeto para ensino de Química Orgânica Experimental baseado no acoplamento catalítico N-C promovido por micro-ondas

This paper describes a three-week mini-project for an Experimental Organic Chemistry course. The activities include N-C cross-coupling synthesis of N-(4-methoxyphenyl) benzamide in an adapted microwave oven by a copper catalyst (CuI). Abilities and concepts normally present in practical organic chemistry courses are covered: use of balances, volumetric glassware, separation of mixtures (liquid-liquid extraction and filtration), chromatographic techniques, melting point determination and stoichiometric calculations.

Wet oxidation of recalcitrant lignin waters: Experimental and kinetic studies

The dissertation is based on four articles dealing with recalcitrant lignin water purification. Lignin, a complicated substance and recalcitrant to most treatment technologies, inhibits seriously pulp and paper industry waste management. Therefore, lignin is studied, using WO as a process method for its degradation. A special attention is paid to the improvement in biodegradability and the reduction of lignin content, since they have special importance for any following biological treatment. In most cases wet oxidation is not used as a complete ' mineralization method but as a pre treatment in order to eliminate toxic components and to reduce the high level of organics produced. The combination of wet oxidation with a biological treatment can be a good option due to its effectiveness and its relatively low technology cost. The literature part gives an overview of Advanced Oxidation Processes (AOPs). A hot oxidation process, wet oxidation (WO), is investigated in detail and is the AOP process used in the research. The background and main principles of wet oxidation, its industrial applications, the combination of wet oxidation with other water treatment technologies, principal reactions in WO, and key aspects of modelling and reaction kinetics are presented. There is also given a wood composition and lignin characterization (chemical composition, structure and origin), lignin containing waters, lignin degradation and reuse possibilities, and purification practices for lignin containing waters. The aim of the research was to investigate the effect of the operating conditions of WO, such as temperature, partial pressure of oxygen, pH and initial concentration of wastewater, on the efficiency, and to enhance the process and estimate optimal conditions for WO of recalcitrant lignin waters. Two different waters are studied (a lignin water model solution and debarking water from paper industry) to give as appropriate conditions as possible. Due to the great importance of re using and minimizing the residues of industries, further research is carried out using residual ash of an Estonian power plant as a catalyst in wet oxidation of lignin-containing water. Developing a kinetic model that includes in the prediction such parameters as TOC gives the opportunity to estimate the amount of emerging inorganic substances (degradation rate of waste) and not only the decrease of COD and BOD. The degradation target compound, lignin is included into the model through its COD value (CODligning). Such a kinetic model can be valuable in developing WO treatment processes for lignin containing waters, or other wastewaters containing one or more target compounds. In the first article, wet oxidation of "pure" lignin water was investigated as a model case with the aim of degrading lignin and enhancing water biodegradability. The experiments were performed at various temperatures (110 -190°C), partial oxygen pressures (0.5 -1.5 MPa) and pH (5, 9 and 12). The experiments showed that increasing the temperature notably improved the processes efficiency. 75% lignin reduction was detected at the lowest temperature tested and lignin removal improved to 100% at 190°C. The effect of temperature on the COD removal rate was lower, but clearly detectable. 53% of organics were oxidized at 190°C. The effect of pH occurred mostly on lignin removal. Increasing the pH enhanced the lignin removal efficiency from 60% to nearly 100%. A good biodegradability ratio (over 0.5) was generally achieved. The aim of the second article was to develop a mathematical model for "pure" lignin wet oxidation using lumped characteristics of water (COD, BOD, TOC) and lignin concentration. The model agreed well with the experimental data (R2 = 0.93 at pH 5 and 12) and concentration changes during wet oxidation followed adequately the experimental results. The model also showed correctly the trend of biodegradability (BOD/COD) changes. In the third article, the purpose of the research was to estimate optimal conditions for wet oxidation (WO) of debarking water from the paper industry. The WO experiments were' performed at various temperatures, partial oxygen pressures and pH. The experiments showed that lignin degradation and organics removal are affected remarkably by temperature and pH. 78-97% lignin reduction was detected at different WO conditions. Initial pH 12 caused faster removal of tannins/lignin content; but initial pH 5 was more effective for removal of total organics, represented by COD and TOC. Most of the decrease in organic substances concentrations occurred in the first 60 minutes. The aim of the fourth article was to compare the behaviour of two reaction kinetic models, based on experiments of wet oxidation of industrial debarking water under different conditions. The simpler model took into account only the changes in COD, BOD and TOC; the advanced model was similar to the model used in the second article. Comparing the results of the models, the second model was found to be more suitable for describing the kinetics of wet oxidation of debarking water. The significance of the reactions involved was compared on the basis of the model: for instance, lignin degraded first to other chemically oxidizable compounds rather than directly to biodegradable products. Catalytic wet oxidation of lignin containing waters is briefly presented at the end of the dissertation. Two completely different catalysts were used: a commercial Pt catalyst and waste power plant ash. CWO showed good performance using 1 g/L of residual ash gave lignin removal of 86% and COD removal of 39% at 150°C (a lower temperature and pressure than with WO). It was noted that the ash catalyst caused a remarkable removal rate for lignin degradation already during the pre heating for `zero' time, 58% of lignin was degraded. In general, wet oxidation is not recommended for use as a complete mineralization method, but as a pre treatment phase to eliminate toxic or difficultly biodegradable components and to reduce the high level of organics. Biological treatment is an appropriate post treatment method since easily biodegradable organic matter remains after the WO process. The combination of wet oxidation with subsequent biological treatment can be an effective option for the treatment of lignin containing waters.

Reactive dissolution of sedimentary rocks in flue gas desulfurization : modeling and experimental investigation

Svavel förekommer i kol och olja och oxideras vid förbränning till svaveldioxid (SO2). Årligen utsläpps stora mängder svaveldioxid som åstadkommer sura regn, minskning av stratosfäriskt ozon och sjukdomar. Av dessa orsaker är det nödvändigt att minska utsläppen av svaveldioxid. Den teknologi som rör planering av reaktorer och processer för rökgasavsvavling (FGD) har utvecklats kraftigt och idag använder man olika typer av lösningar. De vanligaste alternativen för FGD är våtskrubber- och semitorra skrubbersystem (Spray Dry Scrubbers, SDS) och injektionsprocesser för absorbenter. SDS-processer har studerats bland annat av Ahlbeck [4] och Klingspor [5] och injektionsprocesser av Alvfors [6]. Kalksten, som i huvusak består av kalciumkarbonat, används i rökgasavsvavling på grund av sin förmåga att binda svavel i form av sulfatsalter. Den vanligaste rökgasavsvavlingsmetoden är våtskrubbning, där det sedimentära stenmaterialets upplösningshastighet är en av de faktorer som påverkar resultatet mest. Utvärdering av kalkstensreaktivitet är därför speciellt viktig vid planering och drift av anläggningar för rökgasavsvavling. Målsättningen med detta arbete var att modellera upplösningen av olika typers kalksten för att få en kvantitativ utvärdering av kvaliteten på de analyserade proverna. Därtill testades även karbonatbiprodukter från stålindustrin för att utvärdera möjligheter att använda andra råmaterial. Det transienta förloppet har analyserats, varvid upplösningshastigheten modellerades bl.a. i avseende på tid och pH. Under arbetets gång har antalet empiriska korrelationer minskats till fördel för fysikaliska modeller av diffusiva och konvektiva masstransportfenomen. En målsättning var att skapa en effektiv och snabb metod för att testa olika absorbenter för rökgasavsvavling under transienta förlopp. I arbetet användes PSD-analys, gjordes pH-mätningar och andra utvärderingar av de fysikaliska parametrar som ingår i beräkningarna. On-line mätningar för de icke-stationära variablerna tid och pH ger möjlighet att eliminera osäkerheter. Vissa modeller kan vara komplicerade. En modell för upplösningshastigheten med mer detaljerad utvärdering av parametrar och färre approximationer är därför nödvändig då man vill utvärdera reaktionshastigheten för fasta partiklar i sur miljö. Arbetet utfördes under fyra år och fem peer review-artiklar ingår i avhandlingen.

Bayesian methods for estimation, optimization and experimental design

Mathematical models often contain parameters that need to be calibrated from measured data. The emergence of efficient Markov Chain Monte Carlo (MCMC) methods has made the Bayesian approach a standard tool in quantifying the uncertainty in the parameters. With MCMC, the parameter estimation problem can be solved in a fully statistical manner, and the whole distribution of the parameters can be explored, instead of obtaining point estimates and using, e.g., Gaussian approximations. In this thesis, MCMC methods are applied to parameter estimation problems in chemical reaction engineering, population ecology, and climate modeling. Motivated by the climate model experiments, the methods are developed further to make them more suitable for problems where the model is computationally intensive. After the parameters are estimated, one can start to use the model for various tasks. Two such tasks are studied in this thesis: optimal design of experiments, where the task is to design the next measurements so that the parameter uncertainty is minimized, and model-based optimization, where a model-based quantity, such as the product yield in a chemical reaction model, is optimized. In this thesis, novel ways to perform these tasks are developed, based on the output of MCMC parameter estimation. A separate topic is dynamical state estimation, where the task is to estimate the dynamically changing model state, instead of static parameters. For example, in numerical weather prediction, an estimate of the state of the atmosphere must constantly be updated based on the recently obtained measurements. In this thesis, a novel hybrid state estimation method is developed, which combines elements from deterministic and random sampling methods.

Carbon sequestration and nutrient reserves under differen t land use systems

This study evaluated the contribution of agroforestry (AFS) and traditional systems to carbon sequestration and nutrient reserves in plants, litter and soil. The study was carried out in the semiarid region of Brazil in a long-term experiment on an experimental farm of the goat and sheep section of the Brazilian Agricultural Research Corporation (Embrapa). Two agroforestry systems were investigated: agrosilvopastoral (ASP) and forest-pasture areas (SP) as well as traditional agriculture management (TM), two areas left fallow after TM (six fallow years - F6 and nine fallow years - F9) and one area of preserved Caatinga vegetation (CAT). Soil, litter and plants were sampled from all areas and the contents of C, N, P, K, Ca and Mg per compartment determined. The AFS (ASP and SP) had higher nutrient stocks than the traditional and intermediate stocks compared to the preserved Caatinga. In the ASP, a relevant part of the nutrients extracted by crops is returned to the system by constant inputs of litter, weeding of herbaceous vegetation and cutting of the legume crops. After fallow periods of six and nine years, carbon and nutrient stocks in the compartments soil, litter and herbaceous plants were similar to those of the preserved Caatinga (CAT), but still lower than under natural conditions in the woody vegetation.

Warning system based on theoretical-experimental study of dispersion of soluble pollutants in rivers

Information about capacity of transport and dispersion of soluble pollutants in natural streams are important in the management of water resources, especially in planning preventive measures to minimize the problems caused by accidental or intentional waste, in public health and economic activities that depend on the use of water. Considering this importance, this study aimed to develop a warning system for rivers, based on experimental techniques using tracers and analytical equations of one-dimensional transport of soluble pollutants conservative, to subsidizing the decision-making in the management of water resources. The system was development in JAVA programming language and MySQL database can predict the travel time of pollutants clouds from a point of eviction and graphically displays the temporal distribution of concentrations of passage clouds, in a particular location, downstream from the point of its launch.

Characterization and use of swine deep bedding ashes in cementitious composites

The deep bedding is a swine alternative production, especially in the finishing phase, whose byproduct can be recycled, reducing the environmental impact. The objectives of this study were to characterize the ash coming from the controlled burning of the swine deep bedding (SDBA) based on rice husk, and to evaluate their performance in composites as a partial substitute for Portland cement (PC). To measure the differences between SDBA and rice husk ash (RHA) as a reference, we have characterized: particle size distribution, real specific density, x-ray diffraction, electrical conductivity, scanning electron microscopy, chemical analysis and loss on ignition. Samples were prepared for two experimental series: control, and another one with the partial replacement of 30% of SDBA in relation to the mass of the Portland cement. According to the results obtained for physical and mechanical characterization, the composites with SDBA can be used as a constructive element in the rural construction.

Use of nuclear technique in samples for agricultural purposes

The concern related to environment is growing. Due to this, it is needed to determine chemical elements in a large range of concentration. The neutron activation technique (NAA) determines the elemental composition by the measurement of artificial radioactivity in a sample that was submitted to a neutron flux. NAA is a sensitive and accurate technique with low detection limits. An example of application of NAA was the measurement of concentrations of rare earth elements (REE) in waste samples of phosphogypsum (PG) and cerrado soil samples (clayey and sandy soils). Additionally, a soil reference material of the International Atomic Energy Agency (IAEA) was also analyzed. The REE concentration in PG samples was two times higher than those found in national fertilizers, (total of 4,000 mg kg-1 ), 154 times greater than the values found in the sandy soil (26 mg kg-1 ) and 14 times greater than the in clayey soil (280 mg kg-1 ). The experimental results for the reference material were inside the uncertainty of the certified values pointing out the accuracy of the method (95%). The determination of La, Ce, Pr, Nd, Pm, Sm, Eu, Tb, Dy, Ho, Er, Tm, Yb and Lu in the samples and reference material confirmed the versatility of the technique on REE determination in soil and phosphogypsum samples that are matrices for agricultural interest.

Microencapsulation of pequi pulp by spray drying: use of modified starches as encapsulating agent

The aim of this study was to evaluate the microencapsulation of pequi pulp by spray drying. A central composite rotational design was used in order to evaluate the effect of the independent variables: inlet air temperature, surfactant concentration and modified starch concentration. The dependent variables were assumed as yield of the process and the product features microencapsulated. A selection of the best process condition was performed to obtain the best condition of a product with the highest vitamin C and carotenoids content. Powders showed moisture content below 2%. The experimental values of hygroscopicity, yield, water activity, total carotenoids and vitamin C powders ranged from 7.96 to 10.67 g of adsorbed water/100g of solids, 24.34 to 49.80%, 0.13 to 0.30, 145.78 to 292.11 mg of ascorbic acid/g of pequi solids and 15.51 to 123.42 mg of carotenoids/g of pequi solids, respectively. The inlet air temperature 140°C, the surfactant concentration of 2.5% and the modified starch concentration of 22.5% was recommended as the selected condition. By the scanning electron microscopy, it was observed that most of the particles had spherical shape and smooth surface.

Peritonite infecciosa com quantitativos e qualitativos bacterianos conhecidos: estudo experimental em ratos

O objetivo deste estudo é o desenvolvimento de peritonite difusa com qualitativos e quantitativos bacterianos conhecidos. Foram analisados 150 ratos, adultos, machos, da raça Wistar, com peso médio de 150 gramas. Inocularam-se, percutaneamente, na cavidade peritoneal, suspensões constituídas de Escherichia coli e Bacteróides fragilis em concentrações conhecidas, na proporção de 1 ml para cada 100 gramas de peso. Os animais foram distribuídos em cinco grupos de trinta ratos. No grupo I (grupo-controle) inoculou-se solução de cloreto de sódio a 0,9%. Nos demais grupos a concentração do inóculo foi a seguinte: grupo II, com suspensão a 10 (9); grupo III, com suspensão a 10 (8): grupo IV, suspensão a 10 (7) e grupo V com suspensão a 10 (6). Sempre que se detectou o óbito, o animal era submetido à necropsia para avaliação da cavidade peritoneal e colheita de secreções para cultura. Os ratos sobreviventes foram aleatoriamente alocados em dois subgrupos. Os animais do subgrupo A foram sacrificados 24 horas após a inoculação e os do subgrupo B, 120 horas após a inoculação. Observou-se que os ratos do grupo I (controle) evoluíram sem o desenvolvimento de peritonite. Nos grupos II e III,100% dos ratos do subgrupo A e 95,83% dos ratos do subgrupo B desenvolveram peritonite aguda e óbito em menos de 24 horas. No grupo IV, somente 4,17% desenvolveram peritonite e foram a óbito em 72 horas, e no grupo V não ocorreu a formação de peritonite e não houve óbito. Os animais que foram a óbito dos grupos II e III, 96,67% mostraram alterações macroscópicas com exsudato peritoneal difuso, aderências peritoneais mas sem abscesso. Todos os animais com peritonite, desenvolveram derrame pleural bilateral. Nos animais que foram a óbito, nos grupos II e III, evidenciou-se a presença de Escherichia coli e Bacteroides fragilis como causadores das alterações peritoneais e pleurais. Este modelo mostrou que os animais que receberam altas concentrações bacterianas mostraram maior perda de peso, alterações clínicas de sepsis, peritonite difusa aguda, derrame pleural e óbito precoce.

Peritonite aguda experimental em ratos: modelo de bloqueio transdiafragmático com membrana celulósica

O objetivo deste trabalho foi analisar o efeito do bloqueio transdiafragmático na vigência de peritonite aguda infecciosa induzida por inoculação de suspensão bacteriana qualitativa e quantitativa predeterminada. Foram analisados 41 ratos, adultos, machos, da raça Wistar, com peso variando de 118 a 399 g. Os animais foram alocados em dois grupos: grupo A ou controle (n=19), e grupo B ou experimental (n=22). Os animais do grupo B, após indução anestésica inalatória, foram submetidos a laparotomia e bloqueio da superfície peritoneal diafragmática com membrana celulósica e mantidos sob condições ad libitum por 15 dias.. Após esse período, em ambos os grupos inoculou-se, por via percutânea na cavidade abdominal, suspensão bacteriana constituída de Pseudomonas aeruginosa 2,7 x 10(9) UFC/ml (American Type Culture Collection - ATCC 25853), na proporção de 1 ml de suspensão para cada 100 g de peso. Sempre que se detectou o óbito, o animal foi submetido a necropsia para avaliação macroscópica da cavidade peritoneal e pleural, bem como coleta de conteúdo pleural e punção intracardíaca para cultura. Os animais sobreviventes foram sacrificados após 48 horas e, também, submetidos a necropsia e coleta de material para avaliação bacteriológica. Verificaram-se em todos os animais sinais clínicos característicos do estado séptico evolutivo. A incidência de derrame pleural observada no grupo controle em relação ao grupo experimental foi, respectivamente, 18 (94,7%) e oito (36,4%), (p=0,0001). Na análise bacteriológica do derrame pleural e na hemocultura de ambos os grupos, isolou-se como agente único Pseudomonas aeruginosa em, respectivamente, 88,46% e 60,97%. Para a análise da curva de sobrevivência utilizou-se o método não-paramétrico de Kaplan-Meier, demonstrando maior sobrevida no grupo B (p=0,024; p=0,0211). Demonstrou-se, no presente estudo, que os animais submetidos a bloqueio transdiafragmático prévio com membrana celulósica apresentaram maior sobrevida e menor freqüência de derrame pleural, estatisticamente significante, quando comparados aos animais não submetidos ao bloqueio.

Avaliação experimental da recuperação o do íleo paralítico pós-operatório após colectomia convencional e laparoscopica

A cirurgia laparoscópica tem determinado reavaliações de muitos dogmas cirúrgicos. Dentre esses dogmas, está a aparente ausência de íleo paralítico na cirurgia laparoscópica. O objetivo do autor foi avaliar, de maneira experimental, em cães , as diferenças de recuperação da motilidade do cólon após uma colectomia tradicional e uma colectomia videolaparoscópica assistida, determinando ainda as características do íleo paralítico pós-operatório, em cães, após uma cirurgia laparoscópica. Foram utilizados dez cães mestiços, sadios, pesando de 20 a 30 kg, com idade entre 4 e 5 anos. Após uma noite de jejum, os eletrodos foram implantados, através de uma laparotomia, sob condições assépticas e anestesia geral. Cada animal teve implantado oito eletrodos bipolares. Quatro desses eletrodos foram implantados no intestino delgado, e os quatro eletrodos restantes, localizados no cólon, estando o mais distal a 20 cm da reflexão peritoneal do reto. Foi estabelecido um período de dez dias para a total recuperação do íleo paralítico pós-operatório. Após a aquisição de traçados controles, os animais foram randomizados para a realização de uma colectomia laparoscópica ou uma colectomia através de laparotomia. Após uma noite de jejum, a colectomia foi realizada sob condições assépticas e anestesia geral. Após a extubação iniciou-se a aquisição dos dados. A aquisição foi realizada até a completa recuperação do íleo paralítico, de maneira ininterrupta. Nenhum dos animais recebeu analgésicos no período pós-operatório. Não houve diferença entre o final da colectomia e o surgimento do primeiro complexo motor migrante (CMM), no intestino delgado. Com relação ao final das colectomias e o retorno à fase 11, também não houve diferença estatisticamente significativa entre os dois grupos. Os intervalos de tempo entre as ressecções colônicas e o aparecimento da primeira contração colônica migrante (CCM) não foram estatisticamente diferentes, assim como não foram os intervalos entre o final da colectomia e o surgimento da primeira contração migratória gigante do cólon. Quando relacionamos o final da cirurgia e a primeira evacuação, não houve diferença entre os grupos. O autor concluiu que a colectomia laparoscópica cursa com íleo paralítico, e que não houve diferenças entre os grupos, com relação ao período de recuperação do íleo paralítico pós-operatório, nos cães estudados.

Exclusão gastroduodenal e vagotomia troncular: repercussão no peso corporal e gastrinemia- estudo experimental em ratos

OBJETIVO: A obesidade mórbida é uma doença crônica que se acompanha de várias complicações médicas e de uma menor esperança de vida, prejudicando o aspecto físico, emocional, econômico e social. As pesquisas clínicas e experimentais são amplamente justificadas nesta doença, considerando-se que a opção de tratamento operatório é recente. As gastroplastias e as derivações gástricas são algumas das modalidades terapêuticas propostas e produzem uma grande câmara gástrica remanescente, que em algumas técnicas fica totalmente excluída do trânsito alimentar. As possíveis alterações deste segmento, transformado em apêndice do sistema digestório, representam um vasto campo para pesquisa. Tivemos como objetivo avaliar o peso e as alterações da dosagem de gastrina sérica do rato, após denervação vagal troncular subdiafragmática, com exclusão da câmara gástrica e duodeno do trânsito alimentar do animal. MÉTODO: Foi realizada vagotomia troncular e exclusão gastroduodenal em cem ratos, dos quais trinta puderam ser estudados. Eram ratos machos adultos (Rattus Norvegicus Albinus), da linhagem Wistar, com peso médio de 378,67 g. Este estudo foi complementado pela dosagem sérica de gastrina por radioimunoensaio com I125 e duplo anticorpo para gastrina. RESULTADOS: O peso de todos os ratos estudados diminuiu em média de 378,67 g para 285,83 g. Os trinta animais perderam em média 92,83 g (-24,52%). Houve diferenças significativas entre o peso inicial dos animais e o peso final (p< 0,001). A gastrina sérica também diminuiu em vinte e um dos trinta ratos operados, caindo de 59,68 pg/ml para 46,77 pg/ml em média, correspondendo a uma diminuição de 12,91 pg (-19,73%) entre as duas médias (p< 0,001). A análise estatística teve como objetivo avaliar se houve diminuição nas médias das variáveis: peso e gastrina, medidas antes e depois da operação proposta. Para avaliar as diferenças entre as médias, utilizou-se o teste estatístico do T-Student. CONCLUSÕES: Houve uma diminuição significativa do peso e da dosagem de gastrina sérica do animal.