Estudos hidroquímicos da água produzida de um determinado campo de petróleo da bacia potiguar

Waste generated during the exploration and production of oil, water stands out due to various factors including the volume generated, the salt content, the presence of oil and chemicals and the water associated with oil is called produced water. The chemical composition of water is complex and depends strongly on the field generator, because it was in contact with the geological formation for thousands of years. This work aims to characterize the hydrochemical water produced in different areas of a field located in the Potiguar Basin. We collected 27 samples from 06 zones (400, 600, 400/600, 400/450/500, 350/400, A) the producing field called S and measured 50 required parameter divided between physical and chemical parameters, cations and anions. In hydrochemical characterization was used as tools of reasons ionic calculations, diagrams and they hydrochemical classification diagram Piper and Stiff diagram and also the statistic that helped in the identification of signature patterns for each production area including the area that supplies water injected this field for secondary oil recovery. The ionic balance error was calculated to assess the quality of the results of the analysis that was considered good, because 89% of the samples were below 5% error. Hydrochemical diagrams classified the waters as sodium chloride, with the exception of samples from Area A, from the injection well, which were classified as sodium bicarbonate. Through descriptive analysis and discriminant analysis was possible to obtain a function that differs chemically production areas, this function had a good hit rate of classification was 85%

Avaliação preliminar da contaminação por BTEX, em água subterrânea de poços tubulares, no município de Natal-RN

Among the different types of pollutants typically attributed to human activities, the petroleum products are one of the most important because of its toxic potential. This toxicity is attributed to the presence of substances such as benzene and its derivatives are very toxic to the central nervous system of man, with chronic toxicity, even in small concentrations. The area chosen for study was the city of Natal, capital of Rio Grande do Norte, where samples were collected in six different areas in the city, comprising 10 wells located in the urban area, being carried out in three distinct periods March/2009, December / June/2010 and 2009, and were evaluated for contamination by volatile hydrocarbons (BTEX - benzene, toluene, ethylbenzene and xylenes), so this work aimed to assess the quality of groundwater wells that supply funding for public supply and trade in the urban area of the city of Natal, in Rio Grande do Norte, contributing to the environmental assessment of the municipality. The analysis of BTEX in water was performed according to EPA Method 8021b. Was used the technique of headspace (TriPlus TP100) coupled to high resolution gas chromatography with selective photoionization detector (PID) and flame ionization (FID) - model Trace GC Ultra, Thermo Electron Corporation brand. The procedure adopted allowed the detection of concentrations of the order of μg.L-1. Data analysis with respect to BTEX in groundwater in the area monitored so far, shows that water quality is still preserved, because it exceeds the limits imposed by the potability Resolution CONAMA Nº. 396, April 2008

Metodologias estatísticas aplicadas a dados de análises químicas da água produzida em um campo maduro de petróleo

Produced water is characterized as one of the most common wastes generated during exploration and production of oil. This work aims to develop methodologies based on comparative statistical processes of hydrogeochemical analysis of production zones in order to minimize types of high-cost interventions to perform identification test fluids - TIF. For the study, 27 samples were collected from five different production zones were measured a total of 50 chemical species. After the chemical analysis was applied the statistical data, using the R Statistical Software, version 2.11.1. Statistical analysis was performed in three steps. In the first stage, the objective was to investigate the behavior of chemical species under study in each area of production through the descriptive graphical analysis. The second step was to identify a function that classify production zones from each sample, using discriminant analysis. In the training stage, the rate of correct classification function of discriminant analysis was 85.19%. The next stage of processing of the data used for Principal Component Analysis, by reducing the number of variables obtained from the linear combination of chemical species, try to improve the discriminant function obtained in the second stage and increase the discrimination power of the data, but the result was not satisfactory. In Profile Analysis curves were obtained for each production area, based on the characteristics of the chemical species present in each zone. With this study it was possible to develop a method using hydrochemistry and statistical analysis that can be used to distinguish the water produced in mature fields of oil, so that it is possible to identify the zone of production that is contributing to the excessive elevation of the water volume.

Geotecnologia aplicada na análise de bacias hidrográficas e rede de drenagem: estudo das bacias hidrográficas do Murucutu e Aurá, Belém, Pará.

O objetivo deste trabalho foi avaliar variáveis físicas das bacias do rio Murucutu e rio Aurá (BHMA) usando geotecnologias para subsidiar o uso e a conservação desses recursos hídricos. Foi utilizada imagem do ?Shuttle Radar Topography Mission? (SRTM) na modelagem e identificação de características físicas, bem como o uso de sistema geográfico de informação (SIG), técnicas de geoprocessamento, quantificação de áreas das bacias, redes de drenagens, hierarquias fluviais, área de influência de nascentes. As análises dos dados foram realizadas na ferramenta Q.Gis 2.8, versão ?Wien?, integradas ao programa ?Terrain Analysis Using Digital Elevation Models? (TauDEM). Os resultados evidenciaram que as bacias do rio Murucutu e do rio Aurá possuem 37% de área antropizadas. A bacia do rio Aurá possui maior cobertura florestal do que a bacia do rio Murucutu. A ordem hierárquica do rio Aurá é de 5°ordem e do Murucutu é de 4ºordem, evidenciando que o Aurá é mais extenso com maior ramificação dos canais em relação ao Murucutu. 34% das nascentes estão em áreas urbanas na bacia do rio Murucutu. Conclui-se que com a análise melhora-se o entendimento dos elementos físicos, em especial ligados à hidrografia como também, desenvolve-se um produto de importância substancial para estudos morfométricos, principalmente para subsidiar o gerenciamento e outorgas do direito de uso prioritários da água, controle de enchentes, potencial de abastecimento hídrico, vulnerabilidade ao processo erosivo, dinâmica de transporte de poluentes, principais vias de contaminação hídrica, entre outras aplicações diretas.

Análise da modelagem experimental da perda de injetividade

Injectivity decline, which can be caused by particle retention, generally occurs during water injection or reinjection in oil fields. Several mechanisms, including straining, are responsible for particle retention and pore blocking causing formation damage and injectivity decline. Predicting formation damage and injectivity decline is essential in waterflooding projects. The Classic Model (CM), which incorporates filtration coefficients and formation damage functions, has been widely used to predict injectivity decline. However, various authors have reported significant discrepancies between Classical Model and experimental results, motivating the development of deep bed filtration models considering multiple particle retention mechanisms (Santos & Barros, 2010; SBM). In this dissertation, inverse problem solution was studied and a software for experimental data treatment was developed. Finally, experimental data were fitted using both the CM and SBM. The results showed that, depending on the formation damage function, the predictions for injectivity decline using CM and SBM models can be significantly different

Extração de metais (K, Mg, Ba, Ca, Cr, Mn, Li, Fe) de água produzida utilizando sistema microemulsionado

The produced water is a byproduct formed due to production of petroleum and carries with it a high amount of contaminants such as oil particles in suspension, organic compounds and metals. Thus, these latter pollutants are very difficult to treat because of its high solubility in water. The objective of this work is to use and evaluate a microemulsioned system to remove metals ( K , Mg , Ba , Ca , Cr , Mn , Li , Fe ) of synthetic produced water. For the extraction of metals, it was used a pseudoternary diagram containing the following phases: synthetic produced water as the aqueous phase (AP), hexane as organic phase (OP), and a cosurfactant/surfactant ratio equal to four (C/S = 4) as the third phase, where the OCS (saponified coconut oil) was used as surfactant and n-butanol as cosurfactant. The synthetic produced water was prepared in a bench scale and the region of interest in the diagram for the removal of metals was determined by experimental design called. Ten points located in the phase Winsor II were selected in an area with a large amount of water and small amounts of reagents. The samples were analyzed in atomic absorption spectrometer, and the results were evaluated through a statistical assesment, allowing the efficiency analysis of the effects and their interactions. The results showed percentages of extraction above 90% for the metals manganese, iron, chromium, calcium, barium and magnesium, and around 45% for metals lithium and potassium. The optimal point for the simultaneous removal of metals was calculated using statistical artifact multiple response function (MR). This calculation showed that the point of greatest extraction of metals occurs was the J point, with the composition [72% AP, 9% OP, 19% C/S], obtaining a global extraction percentage about 80%. Considering the aspects analyzed, the microemulsioned system has shown itself to be an effective alternative in the extraction of metals on synthetic produced water remediation

Síntese e caracterização do líquido iônico tetrafluoroborato de 1-metil-3-(2,6-(S)-dimetiloct-2-eno)-imidazol como eletrólito para produção de hidrogênio via eletrólise da água

Ionic liquids (ILs) are organic compounds liquid at room temperature, good electrical conductors, with the potential to form as a means for electrolyte on electrolysis of water, in which the electrodes would not be subjected to such extreme conditions demanding chemistry [1]. This paper describes the synthesis, characterization and study of the feasibility of ionic liquid ionic liquid 1-methyl-3(2,6-(S)-dimethyloct-2-ene)-imidazole tetrafluoroborate (MDI-BF4) as electrolyte to produce hydrogen through electrolysis of water. The MDI-BF4 synthesized was characterized by thermal methods of analysis (Thermogravimetric Analysis - TG and Differential Scanning Calorimetry - DSC), mid-infrared spectroscopy with Fourier transform by method of attenuated total reflectance (FTIR-ATR), nuclear magnetic resonance spectroscopy of hydrogen (NMR 1H) and cyclic voltammetry (CV). Where thermal methods were used to calculate the yield of the synthesis of MDI-BF4 which was 88.84%, characterized infrared spectroscopy functional groups of the compound and the binding B-F 1053 cm-1; the NMR 1H analyzed and compared with literature data defines the structure of MDI-BF4 and the current density achieved by MDI-BF4 in the voltammogram shows that the LI can conduct electrical current indicating that the MDI-BF4 is a good electrolyte, and that their behavior does not change with the increasing concentration of water

Análise do comportamento e crescimento do camarão branco Litopenaeus vannamei (Boone, 1931) em diferentes substratos inconsolidados

The aim of this study was to test the sediment preference of L. vannamei shrimp. It was observed shrimp visit frequency, swimming and burying behaviour at different sediment compositions for 24h. Juvenile (0.93 ± 0.29g) and sub-adult shrimps (10.0 ± 1.18g) were obtained from the aquaculture station at Universidade Federal Rural do Semi-Árido UFERSA, and held in a plastic tank (water volume 500 L) supplied with aerated water and kept at constant temperature, pH, and salinity. Shrimp was fed by commercial shrimp dry food. The experimental substrates were composed by A: medium sand + thick sand + very thick sand + gravel; B: very fine sand + fine sand; and C: silt + clay. Thus, six different substrate combinations were tested: A, B, C, A+B, A+C, B+C. To test preference, it was used a cylindrical tank (40 l) divided into six differently substrate compartments. A single shrimp was introduced each tank and the frequency at which this shrimp visited each compartment was recorded over a 24h study period. It was tested 54 shrimp (18 sub-adult males, 18 subadult females and 18 juveniles). For each trial, sediment and water were changed to avoid pheromones and residues influence. Shrimp were weighted and sub-adults were divided by sex: males present petasma and females present thelycum. Data were collected on the experimental day at 19:30; 20:30; 00:30; 1:30; 05:30; 06:30; 13:30 and 14:30 h. At each time point, shrimp were observed for 20-min periods, in which we noted down which compartment the shrimp was occupying at 2-min intervals. Thus, for each period we had eleven observations (88 observations per day). For observations at night, it was used dim red light that did not affect shrimp behaviour. At each 20-min period, it was observed visit frequency in each substrate, if shrimp was burred or not or if it was swimming. There was not significant difference between light and dark burry activity for females. Swimming activity was significantly higher at night, mainly at 00:30 and 01:30 h. All L. vannamei shrimp showed preference for sediment B. This animal presents cyclic activity, spends the day light period buried and swims at night

Análise de viabilidade de injeção de fluidos alternativos ao vapor em reservatórios de óleo pesado

Many of hydrocarbon reserves existing in the world are formed by heavy oils (°API between 10 and 20). Moreover, several heavy oil fields are mature and, thus, offer great challenges for oil industry. Among the thermal methods used to recover these resources, steamflooding has been the main economically viable alternative. Latent heat carried by steam heats the reservoir, reducing oil viscosity and facilitating the production. This method has many variations and has been studied both theoretically and experimentally (in pilot projects and in full field applications). In order to increase oil recovery and reduce steam injection costs, the injection of alternative fluid has been used on three main ways: alternately, co-injected with steam and after steam injection interruption. The main objective of these injection systems is to reduce the amount of heat supplied to the reservoir, using cheaper fluids and maintaining the same oil production levels. This works discusses the use of carbon dioxide, nitrogen, methane and water as an alternative fluid to the steam. The analyzed parameters were oil recoveries and net cumulative oil productions. The reservoir simulation model corresponds to an oil reservoir of 100 m x 100 m x 28 m size, on a Cartesian coordinates system (x, y and z directions). It is a semi synthetic model with some reservoir data similar to those found in Brazilian Potiguar Basin. All studied cases were done using the simulator STARS from CMG (Computer Modelling Group, version 2009.10). It was found that waterflood after steam injection interruption achieved the highest net cumulative oil compared to other fluids injection. Moreover, it was observed that steam and alternative fluids, co-injected and alternately, did not present increase on profitability project compared with steamflooding

Análise paramétrica da injeção de vapor e solvente em reservatórios de óleo pesado

A significant fraction of the hydrocarbon reserves in the world is formed by heavy oils. From the thermal methods used to recovery these resources, Steamflooding has been one of the main economically viable alternatives. In Brazil, this technology is widely used by Petrobras in Northeast fields. Latent heat carried by steam heats the oil in the reservoir, reducing its viscosity and facilitating the production. In the last years, an alternative more and more used by the oil industry to increase the efficiency of this mechanism has been the addition of solvents. When co-injected with steam, the vaporized solvent condenses in the cooler regions of the reservoir and mixes with the oil, creating a low viscosity zone between the steam and the heavy oil. The mobility of the displaced fluid is then improved, resulting in an increase of oil recovery. To better understand this improved oil recovery method and investigate its applicability in reservoirs with properties similar to those found in Potiguar Basin, a numerical study was done to analyze the influence of some operational parameters (steam injection rate, injected solvent volume and solvent type) on oil recovery. Simulations were performed in STARS ("Steam, Thermal, and Advanced Processes Reservoir Simulator"), a CMG ("Computer Modelling Group") program, version 2009.10. It was found that solvents addition to the injected steam not only anticipated the heated oil bank arrival to the producer well, but also increased the oil recovery. Lower cold water equivalent volumes were required to achieve the same oil recoveries from the models that injected only steam. Furthermore, much of the injected solvent was produced with the oil from the reservoir

Análise da estrutura e transporte do zooplâncton no estuário do Rio Caravelas (Bahia-Brasil) através do uso do zooscan

Spatial-temporal dynamics of zooplankton in the Caravelas river estuary (Bahia, Brazil). The survey was conducted in order to describe the zooplankton community of the estuary Caravelas (Bahia, Brazil), to quantify and relate the patterns of horizontal and vertical transport with the type of tide (neap and spring) and tidal phase (flood and ebb). Zooplankton samples were collected with the aid of a suction pump (300L), filtered in plankton nets (300μm) and fixed in saline formalin 4%. Samples were collected at a fixed point (A1), near the mouth of the estuary, with samples taken at neap tides and spring tides during the dry and rainy seasons. Samples were collected for 13 hours, at intervals of 1 hour in 3 depths: surface, middle and bottom. Simultaneous collection of biological, we measured the current velocity, temperature and salinity of the water through CTD. In the laboratory, samples were selected for analysis in estereomicroscope, with 25 groups identified, with Copepoda getting the highest number of species. The 168 samples obtained from temporal samples were subsampled and processed on equipment ZooScan, with the aid of software ZooProcess at the end were generated 458.997 vingnettes. 8 taxa were identified automatically, with 16 classified as a semi-automatic. The group Copepoda, despite the limited taxonomic refinement ZooScan, obtained 2 genera and 1 species identified automatically. Among the seasons dry and wet groups Brachyura (zoea), Chaetognatha, and the Calanoid copepods (others), Temora spp., Oithona spp. and Euterpina acutifrons were those who had higher frequency of occurrence, appearing in more than 70% of the samples. Copepoda group showed the largest percentage of relative abundance in both seasons. There was no seasonal variation of total zooplankton, with an average density of 7826±4219 org.m-3 in the dry season, and 7959±3675 org.m-3 in the rainy season, neither between the types and phases of the tides, but seasonal differences were significant recorded for the main zooplankton groups. Vertical stratification was seen for the major zooplankton groups (Brachyura, Chaetognatha, Calanoida (other), Oithona spp, Temora spp. e Euterpina acutifrons). The scale of this stratification varied with the type (square or tide) and tidal phase (flood or ebb). The instantaneous transport was more influenced by current velocity, with higher values observed in spring tides to the total zooplankton, however, there was a variation of this pattern depending on the zooplankton group. According to the data import and export of total zooplankton, the outflow of organisms of the estuary was higher than the input. The results suggest that the estuary of Caravelas may influence the dynamics of organic matter to the adjacent coast, with possible consequences in National Marine Park of Abrolhos

Água como tema CTS no ensino médio : uma proposição

Dissertação (mestrado)—Universidade de Brasília, Instituto de Ciências Biológicas, Instituto de Física, Instituto de Química, Faculdade UnB Planaltina, Programa de Pós-Graduação em Ensino de Ciências, Mestrado Profissional em Ensino de Ciências, 2016.

Comunidades zooplanctônicas como bioindicadoras da qualidade da água de quatro reservatórios da região semi-árida do Rio Grande do Norte

The response of zooplankton assemblages to variations in the water quality of four man-made lakes, caused by eutrophication and siltation, was investigated by means of canonical correspondence analysis. Monte Carlo simulations using the CCA eingenvalues as test statistics revealed that changes in zooplankton species composition along the environmental gradients of trophic state and abiogenic turbidity were highly significant. The species Brachionus calyciflorus, Thermocyclops sp. and Argyrodiaptomus sp. were good indicators of eutrophic conditions while the species Brachionus dolabratus, Keratella tropica and Hexarthra sp. were good indicators of high turbidity due to suspended sediments. The rotifer genus Brachionus was the most species-rich taxon, comprising five species which were associated with different environmental conditions. Therefore, we tested whether this genus alone could potentially be a better biological indicator of these environmental gradients than the entire zooplankton assemblages or any other random set of five species. The ordination results show that the five Brachionus species alone did not explain better the observed pattern of environmental variation than most random sets of five species. Therefore, this genus could not be selected as a target taxon for more intensive environmental monitoring as has been previously suggested by Attayde and Bozelli (1998). Overall, our results show that changes in the water quality of man-made lakes in a tropical semi-arid region have significant effects on the structure of zooplankton assemblages that can potentially affect the functioning of these ecosystems

Impactes do Preço da Água na Agricultura no Perímetro Irrigado do Vale de Caxito

O aumento da pressão sobre os recursos hídricos tem levado muitos países a reconsiderarem os mecanismos utilizados na indução do uso eficiente da água, especialmente na agricultura irrigada. Estabelecer o preço correto da água é um dos mecanismos de tornar mais eficiente a alocação da água. O presente trabalho tem como objetivo a análise dos impactes económicos, sociais e ambientais de políticas de preço da água. A metodologia utilizada foi a Programação Linear, aplicada ao Perímetro Irrigado do Vale de Caxito, Província do Bengo, a 45 km de Luanda, que tem como fonte o rio Dande. Foram testados três cenários relativos a políticas de tarifação de água: tarifa volumétrica simples, tarifa volumétrica variável, e tarifa fixa por superfície. As principais conclusões mostram que, do ponto de vista do uso eficiente da água na agricultura, os melhores resultados obtêm-se com a tarifa volumétrica variável; do ponto de vista social, a tarifação volumétrica simples apresenta os melhores resultados; o método de tarifa volumétrica variável foi o mais penalizador, reduzindo rapidamente a área das culturas mais consumidoras de água, sendo o melhor do ponto de vista ambiental. Qualquer um dos métodos traz aspetos negativos relativamente à redução da margem bruta total. Palavras-chaves: Recursos hídricos; Preço da água; Programação linear. Abstract: Increased pressure on water resources has led many countries to reconsider the mechanisms used in the induction of efficient water use, especially for irrigated agriculture, a major consumer of water. Establishing the correct price of water is one of the mechanisms for more efficient allocation of water. This paper aims to analyze the economic, social and essenenvironmental impacts of water price policies. The methodology used is the linear programming, applied to the Irrigated Valley Caxito, in Bengo Province, 45 kilometers from Luanda, which has the river Dande as its source. Three scenarios concerning water price policies were tested: simple volumetric rate, variable volumetric rate and flat rate per surface. The main findings show that from the point of view of the efficient use of water in agriculture, the best results are obtained with variable volumetric rate; from the social point of view, the simple volumetric rate has the best results; the volume variable rate method proved to be the most penalizing, quickly reducing the area of most water consuming cultures, being the method in which the environmental objectives would be more readily achieved. Either methods bring negative aspects in relation to the reduction of total gross margin. Key-words: Water resources; Water price; Linear programming.

Análise morfológica de esporos de nosema spp. encontradas nas espécie Apis mellifera da região centro de Portugal entre os anos de 2014 e 2015

As abelhas pertencem à família dos Apídeos, existem em torno de vinte mil espécies distintas, porém são as da espécie Apis mellifera que são as maiores responsáveis pela polinização, colaborando assim para a agricultura com a produção da cera, do mel, própolis, geléia real e o pólen. A nosema spp. é uma doença causada por fungos formando microesporos que podem contaminar abelhas adultas, e é considerado um parasita do trato digestivo das abelhas adultas a que podem ocasionar a morte. Este estudo objetivou avaliar morfologicamente os esporos de nosema spp. e verificar se existe diferença em relação a área de coleta e o ano que foram coletadas as amostras. O presente trabalho foi executado no laboratório de patologia apícola pertencente ao Instituto Politécnico de Bragança em Portugal, em atividades de intercâmbio pelo programa 'Minas Mundi' no primeiro semestre de 2016. As amostras foram processadas de acordo com a metodologia estabelecida pela organização mundial de saúde animal (O.I.E.) e adotada pelo laboratório de referência nacional, utilizando técnicas de microscopia óptica, baseadas em exames microscópicos e macroscópicos do material biológico. As amostras tiveram origem na associação de apicultores da região de Leiria (AARL), sendo estas de diferentes distritos (Guarda, Santarém, Viseu, Leiria e Évora) em Portugal. Foram coletadas um total de 96 amostras de abelhas adultas dos diferentes distritos. Para verificar a presença de nosema spp. foram retirada a traqueIa de todas as abelhas da amostra (total de 60 abelhas por amostra) o tórax e o abdomen foram colocados em um vasilhame com 10ml de água destilada onde foi realizada a compreensão das abelhas maceradando-as até atingir o liquido com cor amarelada. Após a realização desde procedimento, 1ml deste líquido foi transferido para um tubo de ensaio devidamente identificado com a codificação da amostra e com 9ml de água destilada. Uma alíquota foi depositada em câmara de Neubauer para pesquisa de nosema spp.. Com auxilio do software VisicamImageAnalyser 7 pôde-se visualizar os esporos e posteriormente, por meio de fotografias, avaliou-se o comprimento e largura dos mesmos. Para análise estatística foram realizados análise de variância (ANOVA). Das 96 amostras analisadas, 68 obtiveram resultado positivo para nosema spp., sendo que após verificar as amostras positivas em relação ao distrito não se notou diferença significativa (p<0,05) do tamanho dos esporos sendo estes comprimento e largura em relação a origem distintas. Em relação ao ano, ao comparar a morfologia dos esporos de nosema spp. nos anos de 2014 e 2015 destes distritos verificou-se que não houve diferença significativa (p<0,05). Com os resultados obtidos conclui-se que as amostras positivas na região centro de Portugal são homogéneas em relação à morfologia dos esporos. Além disso, o conhecimento de amostras positivas, auxiliou os produtores na melhoria da produção dos apiários e na redução da incidência da nosema nas colmeias prevenindo que este patogeno passasse para outros apiários ou colmeias.