Social Work in the Portuguese empire Health Services

Muitos historiadores, particularmente estrangeiros, que vêem Portugal “de fora”, têm-se mostrado críticos do mau desempenho do império colonial português.Aintolerância religiosa, uso excessivo de força para conseguir o monopólio de especiarias, são alguns aspectos que mereceram críticas mais duras [Devo admitir que fui eu um destes críticos!] mas quase sempre bem fundamentadas e difíceis de rejeitar. Mas é preciso admitir que a história colonial portuguesa é também feita de elementos positivos e menos violentos. Os portugueses devem ser considerados pioneiros de assistência social através das suas políticas inovadoras que providenciaram cuidados para os doentes e desgraçados, embora estas políticas não abrangessem os sujeitos não-Cristãos do império.

Network dynamics in scientific knowledge acquisition: an analysis in three public universities in the state of Bahia

This paper aims to cast some light on the dynamics of knowledge networks in developing countries by analyzing the scientific production of the largest university in the Northeast of Brazil and its influence on some of the remaining regional research institutions in the state of Bahia. Using a methodology test to be employed in a larger project, the Universidade Federal da Bahia (UFBA) (Federal University of Bahia), the Universidade do Estado da Bahia (Uneb) (State of Bahia University) and the Universidade Estadual de Santa Cruz (Uesc)'s (Santa Cruz State University) scientific productions are discussed in one of their most traditionally expressive sectors in academic production - namely, the field of chemistry, using social network analysis of co-authorship networks to investigate the existence of small world phenomena and the importance of these phenomena in research performance in these three universities. The results already obtained through this research bring to light data of considerable interest concerning the scientific production in unconsolidated research universities. It shows the important participation of the UFBA network in the composition of the other two public universities research networks, indicating a possible occurrence of small world phenomena in the UFBA and Uesc networks, as well as the importance of individual researchers in consolidating research networks in peripheral universities. The article also hints that the methodology employed appears to be adequate insofar as scientific production may be used as a proxy for scientific knowledge.

Ensuring dynamic strategic fit of firms that compete globally in alliances and networks: proposing the Global SNA - Strategic Network Analysis - framework

In order to sustain their competitive advantage in the current increasingly globalized and turbulent context, more and more firms are competing globally in alliances and networks that oblige them to adopt new managerial paradigms and tools. However, their strategic analyses rarely take into account the strategic implications of these alliances and networks, considering their global relational characteristics, admittedly because of a lack of adequate tools to do so. This paper contributes to research that seeks to fill this gap by proposing the Global Strategic Network Analysis - SNA - framework. Its purpose is to help firms that compete globally in alliances and networks to carry out their strategic assessments and decision-making with a view to ensuring dynamic strategic fit from both a global and relational perspective.

Biblioteca para a realização de security token services

A família de especificações WS-* define um modelo de segurança para web services, baseado nos conceitos de claim, security token e Security Token Service (STS). Neste modelo, a informação de segurança dos originadores de mensagens (identidade, privilégios, etc.) é representada através de conjuntos de claims, contidos dentro de security tokens. A emissão e obtenção destes security tokens, por parte dos originadores de mensagens, são realizadas através de protocolos legados ou através de serviços especiais, designados de Security Token Services, usando as operações e os protocolos definidos na especificação WS-Trust. O conceito de Security Token Service não é usado apenas no contexto dos web services. Propostas como o modelo dos Information Cards, aplicável no contexto de aplicações web, também utilizam este conceito. Os Security Token Services desempenham vários papéis, dependendo da informação presente no token emitido. São exemplos o papel de Identity Provider, quando os tokens emitidos contêm informação de identidade, ou o papel de Policy Decision Point, quando os tokens emitidos definem autorizações. Este documento descreve o projecto duma biblioteca software para a realização de Security Token Services, tal como definidos na norma WS-Trust, destinada à plataforma .NET 3.5. Propõem-se uma arquitectura flexível e extensível, de forma a suportar novas versões das normas e as diversas variantes que os Security Token Services possuem, nomeadamente: o tipo dos security token emitidos e das claims neles contidas, a inferência das claims e os métodos de autenticação das entidades requerentes. Apresentam-se aspectos de implementação desta arquitectura, nomeadamente a integração com a plataforma WCF, a sua extensibilidade e o suporte a modelos e sistemas externos à norma. Finalmente, descrevem-se as plataformas de teste implementadas para a validação da biblioteca realizada e os módulos de extensão da biblioteca para: suporte do modelo associado aos Information Cards, do modelo OpenID e para a integração com o Authorization Manager.

XAdES4J: a java library for XAdES signature services

As comunicações electrónicas são cada vez mais o meio de eleição para negócios entre entidades e para as relações entre os cidadãos e o Estado (e-government). Esta diversidade de transacções envolve, muitas vezes, informação sensível e com possível valor legal. Neste contexto, as assinaturas electrónicas são uma importante base de confiança, fornecendo garantias de integridade e autenticação entre os intervenientes. A produção de uma assinatura digital resulta não só no valor da assinatura propriamente dita, mas também num conjunto de informação adicional acerca da mesma, como o algoritmo de assinatura, o certificado de validação ou a hora e local de produção. Num cenário heterogéneo como o descrito anteriormente, torna-se necessária uma forma flexível e interoperável de descrever esse tipo de informação. A linguagem XML é uma forma adequada de representar uma assinatura neste contexto, não só pela sua natureza estruturada, mas principalmente por ser baseada em texto e ter suporte generalizado. A recomendação XML Signature Syntax and Processing (ou apenas XML Signature) foi o primeiro passo na representação de assinaturas em XML. Nela são definidas sintaxe e regras de processamento para criar, representar e validar assinaturas digitais. As assinaturas XML podem ser aplicadas a qualquer tipo de conteúdos digitais identificáveis por um URI, tanto no mesmo documento XML que a assinatura, como noutra qualquer localização. Além disso, a mesma assinatura XML pode englobar vários recursos, mesmo de tipos diferentes (texto livre, imagens, XML, etc.). À medida que as assinaturas electrónicas foram ganhando relevância tornou-se evidente que a especificação XML Signature não era suficiente, nomeadamente por não dar garantias de validade a longo prazo nem de não repudiação. Esta situação foi agravada pelo facto da especificação não cumprir os requisitos da directiva 1999/93/EC da União Europeia, onde é estabelecido um quadro legal para as assinaturas electrónicas a nível comunitário. No seguimento desta directiva da União Europeia foi desenvolvida a especificação XML Advanced Electronic Signatures que define formatos XML e regras de processamento para assinaturas electrónicas não repudiáveis e com validade verificável durante períodos de tempo extensos, em conformidade com a directiva. Esta especificação estende a recomendação XML Signature, definindo novos elementos que contêm informação adicional acerca da assinatura e dos recursos assinados (propriedades qualificadoras). A plataforma Java inclui, desde a versão 1.6, uma API de alto nível para serviços de assinaturas digitais em XML, de acordo com a recomendação XML Signature. Contudo, não existe suporte para assinaturas avançadas. Com este projecto pretende-se desenvolver uma biblioteca Java para a criação e validação de assinaturas XAdES, preenchendo assim a lacuna existente na plataforma. A biblioteca desenvolvida disponibiliza uma interface com alto nível de abstracção, não tendo o programador que lidar directamente com a estrutura XML da assinatura nem com os detalhes do conteúdo das propriedades qualificadoras. São definidos tipos que representam os principais conceitos da assinatura, nomeadamente as propriedades qualificadoras e os recursos assinados, sendo os aspectos estruturais resolvidos internamente. Neste trabalho, a informação que compõe uma assinatura XAdES é dividia em dois grupos: o primeiro é formado por características do signatário e da assinatura, tais como a chave e as propriedades qualificadoras da assinatura. O segundo grupo é composto pelos recursos assinados e as correspondentes propriedades qualificadoras. Quando um signatário produz várias assinaturas em determinado contexto, o primeiro grupo de características será semelhante entre elas. Definiu-se o conjunto invariante de características da assinatura e do signatário como perfil de assinatura. O conceito é estendido à verificação de assinaturas englobando, neste caso, a informação a usar nesse processo, como por exemplo os certificados raiz em que o verificador confia. Numa outra perspectiva, um perfil constitui uma configuração do serviço de assinatura correspondente. O desenho e implementação da biblioteca estão também baseados no conceito de fornecedor de serviços. Um fornecedor de serviços é uma entidade que disponibiliza determinada informação ou serviço necessários à produção e verificação de assinaturas, nomeadamente: selecção de chave/certificado de assinatura, validação de certificados, interacção com servidores de time-stamp e geração de XML. Em vez de depender directamente da informação em causa, um perfil — e, consequentemente, a operação correspondente — é configurado com fornecedores de serviços que são invocados quando necessário. Para cada tipo de fornecedor de serviços é definida um interface, podendo as correspondentes implementações ser configuradas de forma independente. A biblioteca inclui implementações de todos os fornecedores de serviços, sendo algumas delas usadas for omissão na produção e verificação de assinaturas. Uma vez que o foco do projecto é a especificação XAdES, o processamento e estrutura relativos ao formato básico são delegados internamente na biblioteca Apache XML Security, que disponibiliza uma implementação da recomendação XML Signature. Para validar o funcionamento da biblioteca, nomeadamente em termos de interoperabilidade, procede-se, entre outros, à verificação de um conjunto de assinaturas produzidas por Estados Membros da União Europeia, bem como por outra implementação da especificação XAdES.

Deuterium NMR Study of Orientational Order in Cellulosic Network Microfibers

Deuterium NMR was used to investigate the orientational order in a composite cellulosic formed by liquid crystalline acetoxypropylcellulose (A PC) and demented nematic 4'-penty1-4-cyanobiphenyl (5CB-4 alpha d(2)) with the per centage of 85% A PC by weight Three forms of the composite including electro spun microfibers, thin film and bulk samples were analyzed The NMR results initially suggest two distinct scenarios, one whet e the 503-alpha d(2), is confined to small droplets with dimensions smaller than the magnetic coherence length and the other where the 503-alpha d(2) molecules arc aligned with the A PC network chains Polarized optical microscopy (POW from thin film samples along with all the NMR results show the presence of 5CB-alpha d(2) droplets in the composite systems with a nematic wetting layer at the APC-5CB-alpha d(2) interface that experiences and order disorder transition driven by the polymer network N-I transition The characterization of the APC network I-N transition shows a pronounced subcritical behavior within a heterogeneity scenario.

The social adjustment of patients with schizophrenia: implications to the mental health policy in Brazil

A sample (n=124) of schizophrenic patients from a defined catchment area of the city os S.Paulo, Brazil, who had been consecutively admitted to hospital, was assessed for psychopathological status and social adjustment levels. Sociodemographic, socio-economic and occupational characteristics were recorded: almost 30% of the subjects had no occupation and received no social benefit, more than two-thirds had a monthly per capita income of US$ 100.00 or less. Sixty-five percent presented with Schneiderian firstrank symptoms. Nearly half the sample showed poor or very poor social adjustment in the month prior to admission. The most affected areas of social functioning were participation in the household activities, work and social withdrawal. The current mental health policy of promoting extra-mural care as an alternative to the previous hospital-based model will then mean the investment in a network of new community-based services, that give effective treatment and support to patients and their families. The need of further research into the current picture of mental disorders in the country is stressed.

Prevalence of fungi in indoor air with reference to gymnasiums with swimming pools

Fungal contamination of air in 10 gymnasiums with swimming pools was monitored. Fifty air samples of 200 L each were collected, using a Millipore air tester, from the area surrounding the pool, in training studios, in showers and changing rooms for both sexes, and also, outside premises, since these are the places regarded as reference. Simultaneously, environmental parameters – temperature and humidity – were also monitored. Some 25 different species of fungi were identified. The six most commonly isolated genera were the following: Cladosporium sp. (36.6%), Penicillium sp. (19.0%), Aspergillus sp. (10.2%), Mucor sp. (7%), Phoma sp. and Chrysonilia sp. (3.3%). For yeasts, three different genera were identified, namely, Rhodotorula sp. (70%), Trichosporon mucoides and Cryptococcus uniguttulattus (10%).

Air fungal contamination in two elementary schools in Lisbon, Portugal

A descriptive study was developed to monitor air fungal contamination in two elementary schools in Lisbon, Portugal. Eight air samples of 250 litres through impaction method were collected in canteen, library, classrooms and also, outside premises as reference place. Simultaneously, were also monitored environmental parameters, including temperature, and humidity through the equipment Babouc, LSI Sistems and according to the International Standard ISO 7726 - 1998. Considering both schools, sixteen different species of fungi in air were identified, being the 2 most commonly isolated Cladosporium sp. (51,1%) and Penicillium sp. (27,5%). Besides these genera Trichoderma, Aspergillus, Alternaria, Chrysonilia, Botritys, Ulocladium, Athrium, Aureobasidium, Phoma, Scedosporium e Geotrichum were also isolated. Regarding yeasts, Candida sp., Cryptococcus sp. and Rhodotorula sp. were isolated. The youngest school, as well canteens in each school, presented the worst results concerning the air fungal contamination, maybe due to the higher number of occupants. There was no significant relationship (p>0,05) between fungal contamination and temperature and humidity.

Formaldehyde in indoor air: a public health problem?

Formaldehyde was the first air pollutant, which already in the 1970s emerged as a specifically non-industrial indoor air quality problem. Yet formaldehyde remained an indoor air quality issue and the formaldehyde level in residential indoor air is among the highest of any indoor air contaminant. Formaldehyde concentrations in 4 different indoor settings (schools, office buildings, new dwellings and occupied dwellings) in Portugal were measured using Photo Ionization Detection (PID) equipment (11,7 eV lamps). All the settings presented results higher than the reference value proposed by Portuguese legislation. Furthermore, occupied dwellings showed 3 units with results above the reference. We could conclude that formaldehyde presence is a reality in monitored indoor settings. Concentration levels are higher than the Portuguese reference value for indoor settings and these can indicate health problems for occupants.

Are air-borne mycotoxins a public health concern in Portugal?

Introduction - Microscopic filamentous fungi, under suitable environmental conditions, can lead to the production of highly toxic chemical substances, commonly known as mycotoxins. The most widespread and studied mycotoxins are metabolites of some genera of moulds such as Aspergillus, Penicillium and Fusarium. Quite peculiar conditions may influence mycotoxin biosynthesis, such as climate, geographical location, cultivation practices, storage and type of substrate. Toxicity has been extensively investigated for the most important mycotoxins, such as aflatoxins, ochratoxin A and Fusarium toxins, and much information derived from toxicokinetics in animal models has also been obtained. The adverse effects are mainly related to genotoxicity, carcinogenicity, mutagenicity, teratogenicity and immunotoxicity. Aim of the study - To identify fungal species able to produce important mycotoxins in different Portuguese settings.

Air pollution at an urban traffic tunnel in Lisbon, Portugal

In this study, the results of chemical concentrations inside and outside of a Lisbon (Portugal) traffic tunnel were compared, during one week. They were obtained by Instrumental Neutron Activation Analysis (INAA). The tunnel values largely exceed the Air Ambient legislated values and the Pearson Correlations Coefficients point out to soil re-suspension/dispersed road dust (As, Ce, Eu, Hf, Fe, Mo, Sc, Zn), traffic-markers (Ba, Cr), tire wear (Cr, Zn), break wear (Fe, Zn, Ba, Cu, Sb), exhaust and motor oil (Zn) and sea-spray (Br, Na). On all days these elements inside the tunnel were more enriched than outside; significant statistical differences were found for Co (p=0.005), Br (p=0.008), Zn (p=0.01) and Sb (p=0.005), while enrichment factors of As and Sc are statistically identical. The highest values were found for As, Br, Zn and Sb, for both inside and outside the tunnel.

Burn wood influence on outdoor air quality in a small village: Foros de Arrão, Portugal

One Plus Sequential Air Sampler—Partisol was placed in a small village (Foros de Arrão) in central Portugal to collect PM10 (particles with an aerodynamic diameter below 10 μm), during the winter period for 3 months (December 2009–March 2010). Particles masses were gravimetrically determined and the filters were analyzed by instrumental neutron activation analysis to assess their chemical composition. The water-soluble ion compositions of the collected particles were determined by Ion-exchange Chromatography. Principal component analysis was applied to the data set of chemical elements and soluble ions to assess the main sources of the air pollutants. The use of both analytical techniques provided information about elemental solubility, such as for potassium, which was important to differentiate sources.

Air fungal contamination in ten hospitals’ food units from Lisbon

A descriptive study was developed to monitor air fungal contamination in ten food units from hospitals. Fifty air samples of 250 litres were collected through impaction method. Samples were collected in food storage facilities, kitchen, food plating, canteen and also, outside premises, since this is the place regarded as reference. Simultaneously, environmental parameters were also monitored, including temperature and relative humidity through the equipment Babouc, LSI Sistems and according to the International Standard ISO 7726.

Indoor air quality in primary schools

Clean air is a basic requirement of life. The Indoor Air Quality (IAQ) has been the object of several studies due to an increasing concern within the scientific community on the effects of indoor air quality upon health, especially as people tend to spend more time indoors than outdoors. The quality of air inside homes, offices, schools or other private and public buildings is an essential determinant of healthy life and people’s well-being. People can be exposed to contaminants by inhalation, ingestion and dermal contact. In the past, scientists have paid much attention to the study of exposure to outdoor air contaminants, because they have realised the seriousness of outdoor air pollution problems. However, each indoor microenvironment has unique characteristics, determined by the local outdoor air, specific building characteristics and indoor activities. Indeed, hazardous substances are emitted from buildings, construction materials and indoor equipment or due to human activities indoors.