Comparing Multilevel Clustering Methods on Weighted Graphs : The Case of Worldwide Air Passenger Traffic 2000-2004

Specific properties emerge from the structure of large networks, such as that of worldwide air traffic, including a highly hierarchical node structure and multi-level small world sub-groups that strongly influence future dynamics. We have developed clustering methods to understand the form of these structures, to identify structural properties, and to evaluate the effects of these properties. Graph clustering methods are often constructed from different components: a metric, a clustering index, and a modularity measure to assess the quality of a clustering method. To understand the impact of each of these components on the clustering method, we explore and compare different combinations. These different combinations are used to compare multilevel clustering methods to delineate the effects of geographical distance, hubs, network densities, and bridges on worldwide air passenger traffic. The ultimate goal of this methodological research is to demonstrate evidence of combined effects in the development of an air traffic network. In fact, the network can be divided into different levels of âeurooecohesionâeuro, which can be qualified and measured by comparative studies (Newman, 2002; Guimera et al., 2005; Sales-Pardo et al., 2007).

Knowledge of Glasgow coma scale by air-rescue physicians

Rapport de synthèse Introduction : Le Glasgow coma score (GCS) est un outil reconnu permettant l'évaluation des patients après avoir subi un traumatisme crânien. Il est réputé pour sa simplicité et sa reproductibilité permettant ainsi aux soignants une évaluation appropriée et continue du status neurologique des patients. Le GCS est composé de trois catégories évaluant la réponse oculaire, verbale et motrice. En Suisse, les soins préhospitaliers aux patients victimes d'un trauma crânien sévère sont effectués par des médecins, essdntiellement à bord des hélicoptères médicalisés. Avant une anesthésie générale nécessaire à ces patients, une évaluation du GCS est essentielle indiquant au personnel hospitalier la gravité des lésions cérébrales. Afin d'évaluer la connaissance du GCS par les médecins à bord des hélicoptères médicalisés en Suisse, nous avons élaboré un questionnaire, contenant dans une première partie des questions sur les connaissances générales du GCS suivi d'un cas clinique. Objectif : Evaluation des connaissances pratiques et théoriques du GCS par les médecins travaillant à bord des hélicoptères médicalisés en Suisse. Méthode : Etude observationnelle prospective et anonymisée à l'aide d'un questionnaire. Evaluation des connaissances générales du GCS et de son utilisation clinique lors de la présentation d'un cas. Résultats : 16 des 18 bases d'hélicoptères médicalisés suisses ont participé à notre étude. 130 questionnaires ont été envoyés et le taux de réponse a été de 79.2%. Les connaissances théoriques du GCS étaient comparables pour tous les médecins indépendamment de leur niveau de formation. Des erreurs dans l'appréciation du cas clinique étaient présentes chez 36.9% des participants. 27.2% ont commis des erreurs dans le score moteur et 18.5% dans le score verbal. Les erreurs ont été répertoriées le plus fréquemment chez les médecins assistants (47.5%, p=0.09), suivi par les chefs de clinique (31.6%, p=0.67) et les médecins installés en cabinet (18.4%, p=1.00). Les médecins cadres ont fait significativement moins d'erreurs que les autres participants (0%, p<0.05). Aucune différence significative n'à été observée entre les différentes spécialités (anesthésie, médecine interne, médecine général et «autres »). Conclusion Même si les connaissances théoriques du GCS sont adéquates parmi les médecins travaillant à bord des hélicoptères médicalisés, des erreurs dans son application clinique sont présentes dans plus d'un tiers des cas. Les médecins avec le moins d'expériences professionnelle font le plus d'erreurs. Au vu de l'importance de l'évaluation correcte du score de Glasgow initial, une amélioration des connaissances est indispensable.

Biological monitoring of exposure to solvents using the chemical itself in urine: application to toluene

Objective Biomonitoring of solvents using the unchanged substance in urine as exposure indicator is still relatively scarce due to some discrepancies between the results reported in the literature. Based on the assessment of toluene exposure, the aim of this work was to evaluate the effects of some steps likely to bias the results and to measure urinary toluene both in volunteers experimentally exposed and in workers of rotogravure factories. Methods Static headspace was used for toluene analysis. o-Cresol was also measured for comparison. Urine collection, storage and conservation conditions were studied to evaluate possible loss or contamination of toluene in controlled situations applied to six volunteers in an exposure chamber according to four scenarios with exposure at stable levels from 10 to 50 ppm. Kinetics of elimination of toluene were determined over 24 h. A field study was then carried out in a total of 29 workers from two rotogravure printing facilities. Results Potential contamination during urine collection in the field is confirmed to be a real problem but technical precautions for sampling, storage and analysis can be easily followed to control the situation. In the volunteers at rest, urinary toluene showed a rapid increase after 2 h with a steady level after about 3 h. At 47.1 ppm the mean cumulated excretion was about 0.005% of the amount of the toluene ventilated. Correlation between the toluene levels in air and in end of exposure urinary sample was excellent (r = 0.965). In the field study, the median personal exposure to toluene was 32 ppm (range 3.6-148). According to the correlations between environmental and biological monitoring data, the post-shift urinary toluene (r = 0.921) and o-cresol (r = 0.873) concentrations were, respectively, 75.6 mu g/l and 0.76 mg/g creatinine for 50 ppm toluene personal exposure. The corresponding urinary toluene concentration before the next shift was 11 mu g/l (r = 0.883). Conclusion Urinary toluene was shown once more time a very interesting surrogate to o-cresol and could be recommended as a biomarker of choice for solvent exposure. [Authors]

Assessments by Community Occupational Therapists in Northern Ireland - 30 September 2006 (PDF 180 KB)

Presents information on referrals for assessment, waiting times for assessment, and assessments commenced during the quarter.

Air services on thin routes: Regional versus low-cost airlines

An examination of the impact in the US and EU markets of two major innovations in the provision of air services on thin routes - regional jet technology and the low-cost business model - reveals significant differences. In the US, regional airlines monopolize a high proportion of thin routes, whereas low-cost carriers are dominant on these routes in Europe. Our results have different implications for business and leisure travelers, given that regional services provide a higher frequency of flights (at the expense of higher fares), while low-cost services offer lower fares (at the expense of lower flight frequencies). Keywords: air transportation; regional jet technology; low-cost business model; thin markets. JEL Classification Numbers: L13; L2; L93.

Generation of polycyclic aromatic hydrocarbons (PAHs) during woodworking operations.

Occupational exposures to wood dust have been associated with an elevated risk of sinonasal cancer (SNC). Wood dust is recognized as a human carcinogen but the specific cancer causative agent remains unknown. One possible explanation is a co-exposure to; wood dust and polycyclic aromatic hydrocarbons (PAHs). PAHs could be generated during incomplete combustion of wood due to heat created by use of power tools. To determine if PAHs are generated from wood during common wood working operations, PAH concentrations in wood dust samples collected in an experimental chamber operated under controlled conditions were analyzed. In addition, personal air samples from workers exposed to wood dust (n = 30) were collected. Wood dust was generated using three different power tools: vibrating sander, belt sander, and saw; and six wood materials: fir, Medium Density Fiberboard (MDF), beech, mahogany, oak and wood melamine. Monitoring of wood workers was carried out by means of personal sampler device during wood working operations. We measured 21 PAH concentrations in wood dust samples by capillary gas chromatography-ion trap mass spectrometry (GC-MS). Total PAH concentrations in wood dust varied greatly (0.24-7.95 ppm) with the lowest being in MDF dust and the highest in wood melamine dust. Personal PAH exposures were between 37.5-119.8 ng m(-3) during wood working operations. Our results suggest that PAH exposures are present during woodworking operations and hence could play a role in the mechanism of cancer induction related to wood dust exposure.

Review of Occupational Health Services in the HPSS (PDF 387 KB)

Supporting a Healthy Workforce

Occupational Therapy Review January 2004 (PDF 55 KB)

Workforce Planning Review

Occupational Therapy Review March 2003 (PDF 350 KB)

Workforce Planning Review