Band gap control via tuning of inversion degree in CdIn2S4 spinel

Based on theoretical arguments, we propose a possible route for controlling the band-gap in the promising photovoltaic material CdIn2S4. Our ab initio calculations show that the experimental degree of inversion in this spinel (fraction of tetrahedral sites occupied by In) corresponds approximately to the equilibrium value given by the minimum of the theoretical inversion free energy at a typical synthesis temperature. Modification of this temperature, or of the cooling rate after synthesis, is then expected to change the inversion degree, which in turn sensitively tunes the electronic band-gap of the solid, as shown here by screened hybrid functional calculations.

Pandeo simultáneo de pilas de puente: aplicación a un cálculo sísmico tipo push-over de las pilas del puente atirantado de Bucaramanga en Colombia

Se presenta el algoritmo implementado para probar la estabilidad de pilas de puente de forma global, es decir, integradas en la estructura más general del puente. El método planteado constituye una alternativa más general al método habitual de leyes momento-curvatura. Se describe su aplicación al puente atirantado de Bucaramanga de 292 m de luz y pilas de 50 y 70 m de altura (altura total de la torre mayor de 133 m). Su aplicación, considerando confinamiento en determinadas secciones de pilas permite tener en cuenta la generación de rótulas plásticas y demostrar el grado de ductilidad alcanzado en la estructura, constituyendo una aplicación practica del método de calculo sísmico por capacidad o push-over a pilas de puente.The relevance of this article is threefold: 1st It presents in detail the algorithm used to test the stability of bridge piers in a global model, i.e., integrated in the most general structure of the bridge. 2nd The method put forward represents a more general alternative to the commonly used moment-curvature method of sectional analysis for biaxial bending under constant axial force. 3rd It describes the algorithm’s application to a 292 m span cable-stayed bridge with piers of 50 and 70 m in height (total height of the biggest tower 133 m). Its application, considering confinement in some particular cross-sections of piers permits the taking into account of “plastic hinges” phenomena due to earthquakes and demonstrates the degree of ductility achieved in the structure. This constitutes a practical application of the push-over method to bridge piers.

Simulation of academic performance rates, estimation of indicators of subjects and of a complete degree

The purpose of this paper is to present a program written in Matlab-Octave for the simulation of the time evolution of student curricula, i.e, how students pass their subjects along time until graduation. The program computes, from the simulations, the academic performance rates for the subjects of the study plan for each semester as well as the overall rates, which are a) the efficiency rate defined as the ratio of the number of students passing the exam to the number of students who registered for it and b) the success rate, defined as the ratio of the number of students passing the exam to the number of students who not only registered for it but also actually took it. Additionally, we compute the rates for the bachelor academic degree which are established for Spain by the National Quality Evaluation and Accreditation Agency (ANECA) and which are the graduation rate (measured as the percentage of students who finish as scheduled in the plan or taking an extra year) and the efficiency rate (measured as the percentage of credits which a student who graduated has really taken). The simulation is done in terms of the probabilities of passing all the subjects in their study plan. The application of the simulator to Polytech students in Madrid, where requirements for passing are specially stiff in first and second year subjects, is particularly relevant to analyze student cohorts and the probabilities of students finishing in the minimum of four years, or taking and extra year or two extra years, and so forth. It is a very useful tool when designing new study plans. The calculation of the probability distribution of the random variable "number of semesters a student has taken to complete the curricula and graduate" is difficult or even unfeasible to obtain analytically, and this is even truer when we incorporate uncertainty in parameter estimation. This is why we apply Monte Carlo simulation which not only provides illustration of the stochastic process but also a method for computation. The stochastic simulator is proving to be a useful tool for identification of the subjects most critical in the distribution of the number of semesters for curriculum vitae (CV) completion and subsequently for a decision making process in terms of CV planning and passing standards in the University. Simulations are performed through a graphical interface where also the results are presented in appropriate figures. The Project has been funded by the Call for Innovation in Education Projects of Universidad Politécnica de Madrid (UPM) through a Project of its school Escuela Técnica Superior de Ingenieros Industriales ETSII during the period September 2010-September 2011.

Quantity and degree assessment in an RDF.based semantic language

This paper introduces a semantic language developed with the objective to be used in a semantic analyzer based on linguistic and world knowledge. Linguistic knowledge is provided by a Combinatorial Dictionary and several sets of rules. Extra-linguistic information is stored in an Ontology. The meaning of the text is represented by means of a series of RDF-type triples of the form predicate (subject, object). Semantic analyzer is one of the options of the multifunctional ETAP-3 linguistic processor. The analyzer can be used for Information Extraction and Question Answering. We describe semantic representation of expressions that provide an assessment of the number of objects involved and/or give a quantitative evaluation of different types of attributes. We focus on the following aspects: 1) parametric and non-parametric attributes; 2) gradable and non-gradable attributes; 3) ontological representation of different classes of attributes; 4) absolute and relative quantitative assessment; 5) punctual and interval quantitative assessment; 6) intervals with precise and fuzzy boundaries

On the Degree of Team Cooperation in CD Grammar Systems.

In this paper, we introduce a dynamical complexity measure, namely the degree of team cooperation, in the aim of investigating "how much" the components of a grammar system cooperate when forming a team in the process of generating terminal words. We present several results which strongly suggest that this measure is trivial in the sense that the degree of team cooperation of any language is bounded by a constant. Finally, we prove that the degree of team cooperation of a given cooperating/distributed grammar system cannot be algorithmically computed and discuss a decision problem.

B.I.E.M. in solid mechanics

In solid mechanics the weak formulation produces an integral equation ready for a discretization and with less restrictive requiremets than the standard field equations. Fundamentally the weak formulation is a expresion of a green formula. An alternative is to choose another green formula materializing a reciprocity relationship between the basis unknowns and an auxiliary family of functions. The degree of smoothness requiered to practice the discretization is then translated to the auxiliar functions. The subsequent discretization (constant, linear etc.)produces a set of equations on the boundary of the domain. For linear 3-D problems the BIEM appears then as a powerful alternative to FEM, because of the reduction to 2-D thanks to the features previously described.

The theory of electrostatic probes in strong magnetic fields : Thesis submitted to the Faculty of The Graduate School of the University of Colorado for the Degree Doctor of Philosophy Department of Aerospace Engineering Science

A theory is developed of an electrostatic probe in a fully-ionized plasma in the presence of a strong magnetic field. The ratio of electron Larmor radius to probe transverse dimension is assumed to be small. Poisson's equation, together with kinetic equations for ions and electrons are considered. An asymptotic perturbation method of multiple scales is used by considering the characteristic lengths appearing in the problem. The leading behavior of the solution is found. The results obtained appear to apply to weaker fields also, agreeing with the solutions known in the limit of no magnetic field. The range of potentials for wich results are presented is limited. The basic effects produced by the field are a depletion of the plasma near the probe and a non-monotonic potential surrounding the probe. The ion saturation current is not changed but changes appear in both the floating potential Vf and the slope of the current-voltage diagram at Vf. The transition region extends beyond the space potential Vs,at wich point the current is largely reduced. The diagram does not have an exponential form in this region as commonly assumed. There exists saturation in electron collection. The extent to which the plasma is disturbed is determined. A cylindrical probe has no solution because of a logarithmic singularity at infinity. Extensions of the theory are considered.

A study the degree of concentration of the Spanish bunkering

This paper shows the Gini Coefficient of the Spanish bunkering, for the Spanish Port System 1960 to the year 2010 with the aim to describe the Spanish bunkering in these periods and propose future strategies. The stage of bunkering must change due to new regulations of marine fuels but to predict the future you must know the past On December 17 came into force on community standard marine fuels. After a complicated negotiation with the industry moves forward a project that is fully compliant with the guidelines of the International Maritime Organization (IMO) and limiting the sulphur and particulate matter of marine fuels used by ships calling or transit through maritime space of the European Union. The impact of a possible extension at European level of the Sulphur Emission Control Areas (SECA) as they are introduced in the Annex VI of the International Convention for the Prevention of Pollution From Ships, 1973 as modified by the Protocol of 1978 (MARPOL) adopted by the International Maritime Organisation (IMO).

Degree of strata of singular cubic surfaces

Determinación de los grados de algunos estratos de una clasificación de superficies cúbicas singulares, que son subvariedades del espacio proyectivo de dimensión 19 de las que se conoce su dimensión y que son irreducibles.

Survey on student motivation and approval of educational environment at Universidad Politécnica de Madrid within the European Higher Education area implementation

A recent study elaborated by Vicerrectorado de Ordenación Académica y Planificación Estratégica of Technical University of Madrid (UPM) defines the satisfaction of the university student body as "the response that the University offers to the expectations and demands of service of the students, considered in a general way ". Besides an indicator of academic and institutional insertion of the student, the assessment of student engagement allows us to adapt the academic offer and the extension services of the University to the real needs of the students. The process of convergence towards the European Higher Education Area (EHEA) raises the need to form in competitions, that is to say, of developing in our students capacities and knowledge beyond the purely theoretical-practical thing. Therefore, the perception and experience of the educational process and environment by the students is an important issue to be addressed to accomplish their expectations and achieve a curriculum accordingly to EHEA expectations. The present study aims to explore the student motivation and approval of the educational environment at the UPM. To this end a total of 97 students enrolled in the undergraduate program of Civil Engineering, Computer Engineering and Agronomic Engineering at UPM were surveyed. The survey consisted of 40 questions divided in three blocks. The first one of 20 questions of personal character in that they were gathering, besides the sex and the age, the degree of fulfilment, implication and dedication with the institution and the academic tasks. In the second block we identify 10 questions related to the perception of the student on the teaching quality, and finally a block of 10 questions regarding the Bologna Process. The students personal motivation was moderately high, with a score of 3.6 (all scores are provided on a 5-point scale), being the most valuable items obtaining a university degree (4,3) and the friendship between students (4,2). Any significant difference was shown between sexes (P=0.23) since the averages for this block of questions were of 3.7±0.3 and 3.5±0.4 for women and men respectively. The students are moderately satisfied with their graduate studies with an average score of 3,2, being the questions that reflect a minor satisfaction the research profile of the teachers (2,8) and the organization of the Schools (2,9). The best valued questions are related to the usefulness and quality of the degrees, with 3,5 and 3,4 respectively, and to the interest of the courses within the degree (3,4). For sexes, the results of this block of questions are similar (3.1±0.3 and 3.2±0.3 for men and women respectively=0.79). Also, there were no differences (P=0.39) between the students who arrange work and studies or do not work (3.1±0.2 and 3.2±0.3 respectively). In conclusion, students at UPM present an acceptable degree of motivation and satisfaction with regard to the studies and services that offer their respective Schools. Both characteristics receive the same value both for men and for women and so much for students who arrange work and studies as for those who devote themselves only to studying. In a significant way, students who are more engaged and are in-class attendants present the major degree of satisfaction.Overall, there is a great lack of information regarding the Bologna Process. In fact to the majority, they would like to know more on what it is, what it means and what changes will involve its implementation.

A novel topology control approach to maintain the node degree in dynamic wireless sensor networks

Topology control is an important technique to improve the connectivity and the reliability of Wireless Sensor Networks (WSNs) by means of adjusting the communication range of wireless sensor nodes. In this paper, a novel Fuzzy-logic Topology Control (FTC) is proposed to achieve any desired average node degree by adaptively changing communication range, thus improving the network connectivity, which is the main target of FTC. FTC is a fully localized control algorithm, and does not rely on location information of neighbors. Instead of designing membership functions and if-then rules for fuzzy-logic controller, FTC is constructed from the training data set to facilitate the design process. FTC is proved to be accurate, stable and has short settling time. In order to compare it with other representative localized algorithms (NONE, FLSS, k-Neighbor and LTRT), FTC is evaluated through extensive simulations. The simulation results show that: firstly, similar to k-Neighbor algorithm, FTC is the best to achieve the desired average node degree as node density varies; secondly, FTC is comparable to FLSS and k-Neighbor in terms of energy-efficiency, but is better than LTRT and NONE; thirdly, FTC has the lowest average maximum communication range than other algorithms, which indicates that the most energy-consuming node in the network consumes the lowest power.

Evolutionary computation of forests with Degree- and Role-Constrained Minimum Spanning Trees

Finding the degree-constrained minimum spanning tree (DCMST) of a graph is a widely studied NP-hard problem. One of its most important applications is network design. Here we deal with a new variant of the DCMST problem, which consists of finding not only the degree- but also the role-constrained minimum spanning tree (DRCMST), i.e., we add constraints to restrict the role of the nodes in the tree to root, intermediate or leaf node. Furthermore, we do not limit the number of root nodes to one, thereby, generally, building a forest of DRCMSTs. The modeling of network design problems can benefit from the possibility of generating more than one tree and determining the role of the nodes in the network. We propose a novel permutation-based representation to encode these forests. In this new representation, one permutation simultaneously encodes all the trees to be built. We simulate a wide variety of DRCMST problems which we optimize using eight different evolutionary computation algorithms encoding individuals of the population using the proposed representation. The algorithms we use are: estimation of distribution algorithm, generational genetic algorithm, steady-state genetic algorithm, covariance matrix adaptation evolution strategy, differential evolution, elitist evolution strategy, non-elitist evolution strategy and particle swarm optimization. The best results are for the estimation of distribution algorithms and both types of genetic algorithms, although the genetic algorithms are significantly faster.

Los paisajes del desecho: reactivación de los lugares del deterioro

Actualmente en nuestro planeta producimos 1.300 millones de toneladas de residuos urbanos al año. Si los extendemos sobre la superficie de un cuadrado de lado 100 m (una hectárea) alcanzarían una altura de 146 km. ¿Cuál es el origen de nuestros residuos? ¿A dónde va esta basura? ¿Cómo nos afecta? ¿Tiene alguna utilidad? Se trata de un problema antiguo que, en los últimos tiempos, ha adquirido una nueva dimensión por el tipo y la cantidad de residuos generados. Las primeras preocupaciones de la ciudad por ordenar estos problemas dieron lugar al establecimiento de espacios o lugares específicos para la acumulación de los residuos urbanos: los vertederos. Los desechos hoy se generan más rápidamente que los medios disponibles para reciclarlos o tratarlos. Los vertederos de residuos urbanos son y seguirán siendo, a corto y medio plazo, soluciones válidas por ser un método de gestión relativamente barato, sobre todo en los países en vías de desarrollo. Como consecuencia y necesidad de lo anterior, se plantea demostrar que la recuperación y la transformación de estos vertederos de residuos urbanos (lugares del deterioro), una vez abandonados, es posible y que además pueden dar lugar a nuevos espacios públicos estratégicos de la ciudad contemporánea. Son espacios de oportunidad, vacíos monumentales producto de una reactivación arquitectónica y paisajística realizada a partir de complejos procesos de ingeniería medioambiental. Pero las soluciones aplicadas a los vertederos de residuos urbanos desde mediados del siglo XX se han realizado exclusivamente desde la ingeniería para tratar de resolver cuestiones técnicas, un modelo agotado que ya no puede gestionar la magnitud que este problema ha alcanzado, haciéndose necesaria e inevitable la participación de la arquitectura para abrir nuevas líneas de investigación y de acción. En estos primeros compases del siglo XXI existe una “nueva” preocupación, un “nuevo” interés en los paradigmas de lo ecológico y de la sostenibilidad, también un interés filosófico (que igualmente otorga un nuevo valor al residuo como recurso), que dirigen su mirada hacia un concepto de paisaje abierto y diferente a modelos anteriores más estáticos, recuperando como punto de partida el ideal pintoresco. El landscape urbanism se consolida como una disciplina capaz de dar respuesta a lo natural y artificial simultáneamente, que sustituye a las herramientas tradicionales de la arquitectura para solucionar los problemas de la ciudad contemporánea, incorporando las infraestructuras de gran escala, como un vertedero de residuos urbanos, y los paisajes públicos que generan como el verdadero mecanismo de organización del urbanismo de hoy. No se trata solo de un modelo formal sino, lo que es más importante: de un modelo de procesos. Esta nueva preocupación permite abordar la cuestión del paisaje de manera amplia, sin restricciones, con un alto grado de flexibilidad en las nuevas propuestas que surgen como consecuencia de estos conceptos, si bien los esfuerzos, hasta la fecha, parecen haberse dirigido más hacia el fenómeno de lo estético, quedando todavía por explorar las consecuencias políticas, sociales, económicas y energéticas derivadas de los residuos. También las arquitectónicas. El proyecto del landscape urbanism se ocupa de la superficie horizontal, del plano del suelo. Desde siempre, la preparación de este plano para desarrollar cualquier actividad humana ha sido un gesto fundacional, un gesto propio necesario de toda arquitectura, que además ahora debe considerarlo como un medio o soporte biológicamente activo. En términos contemporáneos, el interés disciplinar radica en la continuidad y en la accesibilidad del suelo, diluyendo los límites; en que funcione a largo plazo, que se anticipe al cambio, a través de la flexibilidad y de la capacidad de negociación, y que sea público. La recuperación de un vertedero de residuos urbanos ofrece todas estas condiciones. Un breve recorrido por la historia revela los primeros ejemplos aislados de recuperación de estos lugares del deterioro, que han pasado por distintas fases en función de la cantidad y el tipo de los desechos producidos, evolucionando gracias a la tecnología y a una nueva mirada sobre el paisaje, hasta desarrollar una verdadera conciencia de lo ecológico (nacimiento de una ideología). El Monte Testaccio en Roma (siglos I-III d.C.) constituye un caso paradigmático y ejemplar de vertedero planificado a priori no solo como lugar en el que depositar los residuos, sino como lugar que será recuperado posteriormente y devuelto a la ciudad en forma de espacio público. Una topografía de desechos generada por acumulación, organizada y planificada durante tres siglos, que nos hace reflexionar sobre los temas de producción, consumo y proyecto arquitectónico. El Monte Testaccio revela una fuente de inspiración, un arquetipo de gestión sostenible de los recursos y del territorio. A través de la experiencia en la recuperación y transformación en espacios públicos de casos contemporáneos, como el antiguo vertedero de Valdemingómez en Madrid o el de El Garraf en Barcelona, se han analizado las técnicas y las soluciones empleadas para establecer nuevas herramientas de proyecto planteadas en clave de futuro, que revelan la importancia de los procesos frente a la forma, en los cuales intervienen muchos factores (tanto naturales como artificiales), entre ellos la vida y el tiempo de la materia viva acumulada. Son lugares para nuevas oportunidades y ejemplos de una nueva relación con la naturaleza. La reactivación de los vertederos de residuos, a través del proyecto, nos propone una nueva topografía construida en el tiempo, el suelo como soporte, como punto de encuentro de la naturaleza y los sistemas tecnológicos de la ciudad que posibilitan nuevos modos de vida y nuevas actividades. Los vertederos de residuos son inmensas topografías naturales surgidas de procesos artificiales, atalayas desde las que divisar un nuevo horizonte, un nuevo mundo, un nuevo futuro donde sea posible lograr la reversibilidad de nuestros actos del deterioro. Pero la voluntad de estas recuperaciones y transformaciones no consiste exclusivamente en su reintegración al paisaje, sino que han servido como muestra de las nuevas actitudes que la sociedad ha de emprender en relación a los temas medio ambientales. ABSTRACT Here on our planet we currently produce 1.3 billion tonnes of urban waste per year. If we were to spread this over a surface of 100m2 (one hectare), it would reach a height of 146km. What is the origin of this waste? Where does our refuse go? How does it affect us? Does it have any uses? We are dealing with an old problem which, in recent times, has taken on a new dimension due to the type of waste and the amount generated. Cities’ first concerns in resolving these problems gave rise to the establishment of areas or specific places for the accumulation of urban waste: landfills. These days, waste is generated more quickly than the available resources can recycle or process it. Urban waste landfills are and will continue to be, in the short and mid-term, valid solutions, given that they constitute a relatively cheap method for waste management, especially in developing countries. Consequently and necessarily, we plan to demonstrate that it is possible to recover and transform these urban waste landfills (areas of deterioration) once they have been abandoned and that they can give rise to new strategic public areas in contemporary cities. They are areas of opportunity, monumental vacancies produced by an architectural reactivation of the landscape, which is achieved using complex processes of environmental engineering. But the solutions applied to urban waste landfills throughout the 20th century have used engineering exclusively in the attempt to resolve the technical aspects. This is a worn-out model which can no longer handle the magnitude which the problem has attained and therefore, there is an inevitable need for the participation of architecture, which can open new lines of research and action. In these first steps into the 21st century, there is a “new” concern, a “new” interest in the paradigms of environmentalism and sustainability. There is also a philosophical interest (which assigns the new value of ‘resource’ to waste) and all is aimed towards the concept of an open landscape, unlike the previous, more static models, and the intention is to recover picturesque ideals as the starting point. Landscape urbanism has been established as a discipline capable of simultaneously responding to the natural and the artificial, replacing the traditional tools of architecture in order to resolve contemporary cities’ problems. It incorporates large scale infrastructures, such as urban waste landfills, and public landscapes which are generated as the true organisational mechanism of modern day urbanism. It is not merely a formal model, it is more important than that: it is a model of processes. This new concern allows us to address the matter of landscape in a broad way, without restrictions, and with a great degree of flexibility in the new proposals which come about as a consequence of these concepts. However, efforts to date seem to have been more directed at aesthetic aspects and we have yet to explore the political, social, economic and energetic consequences derived from waste – nor have we delved into the architectural consequences. The landscape urbanism project is involved with the horizontal surface, the ground plane. Traditionally, the preparation of this plane for the development of any human activity has been a foundational act, a necessary act of all architecture, but now this plane must be considered as a biologically active medium or support. In contemporary terms, the discipline’s interest lies in the continuity and accessibility of the land, diffusing the limits; in long term functionality; in the anticipation of change, via flexibility and the ability to negotiate; and in it being a public space. The recovery of an urban waste landfill offers all of these conditions. A brief look through history reveals the first isolated examples of recovery of these spaces of deterioration. They have gone through various phases based on the quantity and type of waste produced, they have evolved thanks to technology and a new outlook on the landscape, and a real environmental awareness has been developed (the birth of an ideology). Monte Testaccio in Rome (1st to 3rd Century AD) constitutes a paradigmatic and exemplary case of a landfill that was planned a priori not only as a place to deposit waste but also as a place that would be subsequently recovered and given back to the city in the form of a public space. This spoil mound, generated by organised and planned accumulation over three centuries, makes us reflect on the themes of production, consumption and architectural planning. Monte Testaccio reveals a source of inspiration, an archetype of the sustainable management of resources and land. Using our experience of contemporary cases of land recovery and its transformation into public spaces, such as the former Valdemingómez landfill in Madrid or the Garraf in Barcelona, we analysed the techniques and solutions used in order to establish new project tools. These are proposed with an eye on the future, seeing as they reveal the importance of the processes over the form and involve many factors (both natural and artificial), including the life and age of the accumulated living matter. They are places for new opportunities and examples of our new relationship with nature. The reactivation of landfills, via this project, is a proposal for a new topography built within time, using the ground as the support, as the meeting point between nature and the technological systems of the city which make it possible for new ways of life and new activities to come about. Landfills are immense natural topographical areas produced by artificial processes, watchtowers from which to discern a new horizon, a new world, a new future in which it will be possible to reverse our acts of deterioration. But the intention behind these recoveries and transformations does not only hope for landscape reintegration but it also hopes that they will also serve as a sign of the new attitudes that must be adopted by society with regard to environmental matters.

3.3 University of Missouri awarded a law degree to Lloyd Gaines in 2006

In 2006, a law degree was posthumously awarded to Lloyd and accepted by his nephew, George Gaines.

3.4 University of Missouri Doctor of Law Degree to Lloyd Lionel Gaines

On May 13, 2006, University of Missouri awarded Lloyd Gaines Doctor of Law degree.