The valuation of travel time savings in least developed countries:theoretical and empirical challenges and results from a field study

In developed countries travel time savings can account for as much as 80% of the overall benefits arising from transport infrastructure and service improvements. In developing countries they are generally ignored in transport project appraisals, notwithstanding their importance. One of the reasons for ignoring these benefits in the developing countries is that there is insufficient empirical evidence to support the conventional models for valuing travel time where work patterns, particularly of the poor, are diverse and it is difficult to distinguish between work and non-work activities. The exclusion of time saving benefits may lead to a bias against investment decisions that benefit the poor and understate the poverty reduction potential of transport investments in Least Developed Countries (LDCs). This is because the poor undertake most travel and transport by walking and headloading on local roads, tracks and paths and improvements of local infrastructure and services bring large time saving benefits for them through modal shifts. The paper reports on an empirical study to develop a methodology for valuing rural travel time savings in the LDCs. Apart from identifying the theoretical and empirical issues in valuing travel time savings in the LDCs, the paper presents and discusses the results of an analysis of data from Bangladesh. Some of the study findings challenge the conventional wisdom concerning the time saving values. The Bangladesh study suggests that the western concept of dividing travel time savings into working and non-working time savings is broadly valid in the developing country context. The study validates the use of preference methods in valuing non-working time saving values. However, stated preference (SP) method is more appropriate than revealed preference (RP) method.

Articulating wider smartphone emerging security issues in the case of M-government in Turkey

For the last several years, mobile devices and platform security threats, including wireless networking technology, have been top security issues. A departure has occurred from automatic anti-virus software based on traditional PC defense: risk management (authentication and encryption), compliance, and disaster recovery following polymorphic viruses and malware as the primary activities within many organizations and government services alike. This chapter covers research in Turkey as a reflection of the current market – e-government started officially in 2008. This situation in an emerging country presents the current situation and resistances encountered while engaging with mobile and e-government interfaces. The authors contend that research is needed to understand more precisely security threats and most of all potential solutions for sustainable future intention to use m-government services. Finally, beyond m-government initiatives' success or failure, the mechanisms related to public administration mobile technical capacity building and security issues are discussed.

Parental information needs in chronic renal failure and diabetes mellitus

The information needs of parents of children with end stage renal failure (ESRF) or with insulin dependent diabetes mellitus (IDDM) were assessed by questionnaires over a 2-year period. Questionnaires were posted on seven occasions at 4-monthly intervals and were sent to both mothers and fathers. Most information needs were reported to be for detailed test results, for new information about the condition and about the child's future social development. Questions responsible for the three highest scores were concerned with the future: the child's fertility; their social, career and marriage prospects; and the hope for a new improved treatment. For the IDDM mothers, scores were significantly different depending on age of the child (P = 0.02). Change in treatment mode had no significant effect on the information needs of parents of children with ESRF (P = 0.81). Occupation was significantly associated with the mean general information needs scores for parents, with occupations of a lower socioeconomic status associated with higher information needs scores. There were no significant differences between the reported mean general information needs scores of parents of children with ESRF and of parents of children with IDDM (P = 0.69) or between mothers and fathers mean general information needs scores (P = 0.58). CONCLUSION: Multidisciplinary team members need to tailor information to the needs of the individual families and be sensitive to socioeconomic factors and communication issues.

Gene therapy and ocular disease

The objective of this article is to give an overview of the history of the development and problems of gene therapy, while also considering the ethical and moral issues surrounding the application of the technology.

An empirical investigation of the effect of rights issue announcements on share returns and the determinants of abnormal returns on the Kuala Lumpur Stock Exchange

This thesis examines the effect of rights issue announcements on stock prices by companies listed on the Kuala Lumpur Stock Exchange (KLSE) between 1987 to 1996. The emphasis is to report whether the KLSE is semi strongly efficient with respect to the announcement of rights issues and to check whether the implications of corporate finance theories on the effect of an event can be supported in the context of an emerging market. Once the effect is established, potential determinants of abnormal returns identified by previous empirical work and corporate financial theory are analysed. By examining 70 companies making clean rights issue announcements, this thesis will hopefully shed light on some important issues in long term corporate financing. Event study analysis is used to check on the efficiency of the Malaysian stock market; while cross-sectional regression analysis is executed to identify possible explanators of the rights issue announcements' effect. To ensure the results presented are not contaminated, econometric and statistical issues raised in both analyses have been taken into account. Given the small amount of empirical research conducted in this part of the world, the results of this study will hopefully be of use to investors, security analysts, corporate financial managements, regulators and policy makers as well as those who are interested in capital market based research of an emerging market. It is found that the Malaysian stock market is not semi strongly efficient since there exists a persistent non-zero abnormal return. This finding is not consistent with the hypothesis that security returns adjust rapidly to reflect new information. It may be possible that the result is influenced by the sample, consisting mainly of below average size companies which tend to be thinly traded. Nevertheless, these issues have been addressed. Another important issue which has emerged from the study is that there is some evidence to suggest that insider trading activity existed in this market. In addition to these findings, when the rights issue announcements' effect is compared to the implications of corporate finance theories in predicting the sign of abnormal returns, the signalling model, asymmetric information model, perfect substitution hypothesis and Scholes' information hypothesis cannot be supported.

Collaborative alliances and organisational innovation : a study of the innovation process

Despite the voluminous studies written about organisational innovation over the last 30-40 years our understanding of this phenomenon continues to be inconsistent and inconclusive (Wolfe, 1994). An assessment of the theoretical and methodological issues influencing the explanatory utility of many studies has led scholars (e.g. Slappendel, 1996) to re-evaluate the assumptions used to ground studies. Building on these criticisms the current study contributes to the development of an interactive perspective of organisational innovation. This work contributes empirically and theoretically to an improved understanding of the innovation process and the interaction between the realm of action and the mediating effects of pre-existing contingencies i.e. social control, economic exchange and the communicability of knowledge (Scarbrough, 1996). Building on recent advances in institutional theory (see Barley, 1986; 1990; Barley and Tolbert, 1997) and critical theory (Morrow, 1994, Sayer, 1992) the study aims to demonstrate, via longitudinal intensive research, the process through which ideas are translated into reality. This is significant because, despite a growing recognition of the implicit link between the strategic conduct of actors and the institutional realm in organisational analysis, there are few examples that theorise and empirically test these connections. By assessing an under researched example of technology transfer; the government's Teaching Company Scheme (TCS) this project provides a critique of the innovation process that contributes to theory and our appreciation of change in the UK government's premier technology transfer scheme (QR, 1996). Critical moments during the translation of ideas illustrate how elements that are linked to social control, economic exchange and communicability mediate the innovation process. Using analytical categories i.e. contradiction, slippage and dysfunctionality these are assessed in relation to the actions (coping strategies) of programme members over a two-year period. Drawing on Giddens' (1995) notion of the duality of structure this study explores the nature of the relationship between the task environment and institutional environment demonstrating how and why knowledge is both an enabler and barrier to organisational innovation.

The impact of national cultures and interpersonal factors on managerial communication

This study was undertaken for two primary purposes. The first was to discover whether or not two of the four cultural dimensions depicted by Hof-stede (1980), namely Power Distance and Uncertainty Avoidance, could be repeated using samples from seven organizations operating in three distinct cultural settings. The second was to assess the degree to which these dimensions affect superior-subordinate communication across the culturally-different groups. Also, the impact of the three interpersonal factors: Trust in Superior, Upward Influence and Mobility Aspirations was investigated cross-culturally. Participants were 291 managers from seven organizations; four Sudanese, two white British and an organization in Britain run by a group of British citizens of Pakistani extraction. It was hypothesized that the Power Distance and Uncertainty Avoidance of the three groups would replicate Hof-stede's. Specific implications of these dimensions for organizational communication and in particular for superior-subordinate communication were also hypothesized. Multiple regression analyses were performed with items of the two cultural dimensions and the three interpersonal factors (each in turn) forming the independent variables, while the organizational communication aspects formed the dependent variables. T-tests between means were also used to compare and contrast issues such as directionality of information flow across organizations operating in these settings. Work-related values of each of the three cultural groups provided support for Hofstede's model. However, only tentative support was given to the hypothesized relationships between the cultural dimensions and organizational communication. Similarly, weak associations were found between the three interpersonal factors and superior-subordinate communication behaviour. Some practical and theoretical implications are offered. An evaluation of the study and recommendation for further research are also given.

Leadership through intellect:the meaning of leadership in the intellectual history of nineteenth and early twentieth century Germany

This study examines the understanding of leadership in Germany, as it developed throughout the nineteenth and early twentieth century. The investigation is based on the work of contemporary writers and thinkers, as well as on the leadership styles of key political figures. Given the ideological connotations of the term "Führung" in post-war Germany, the aim is to reconsider the meaning of leadership, with particular reference to the alternative notion of spiritual guidance. The rise to power of Napoleon I fundamentally influenced the understanding of leadership in Germany, as is demonstrated through an analysis of the Napoleonic reception in contemporary literature. Despite polarised responses, the formation of the heroic ideal may be identified, the quest for spiritual guidance having become subordinate to the charismatic legitimisation of political authority. As advocated by Thomas Carlyle, the mid to late nineteenth century witnessed the realisation of this ideal through Bismarck. The intellectual response to this development is characterised by the work of Wagner, Burckhardt and Nietzsche. In different ways each figure emphasised the need to redefine greatness and to seek spiritual guidance from alternative sources. The reflection on leadership in the early twentieth century is traced through the work of Harry Graf Kessler and the circles around Stefan George. Hitherto unpublished material is examined, revealing both the influences of nineteenth century thought and reactions to the "persönliches Regiment" of Wilhelm II. The intellectual debate culminates in Max Kommerell's 1928 study Der Dichter als Führer. Read in conjunction with unpublished notes and correspondence, this provides new insights into Kommerell's thought. The concept of poetic leadership constitutes a potential spiritual and intellectual alternative to the ideal of the political "Führer" which dominated the forthcoming era. It therefore remains of contemporary significance and may contribute to a broader discussion of the leadership dilemma in modern Germany.

A systems and cybernetic perspective on complex problem solving

This thesis is concerned with Organisational Problem Solving. The work reflects the complexities of organisational problem situations and the eclectic approach that has been necessary to gain an understanding of the processes involved. The thesis is structured into three main parts. Part I describes the author's understanding of problems and suitable approaches. Chapter 2 identifies the Transcendental Realist (TR) view of science (Harre 1970, Bhaskar 1975) as the best general framework for identifying suitable approaches to complex organisational problems. Chapter 3 discusses the relationship between Checkland's methodology (1972) and TR. The need to generate iconic (explanatory) models of the problem situation is identified and the ability of viable system modelling to supplement the modelling stage of the methodology is explored in Chapter 4. Chapter 5 builds further on the methodology to produce an original iconic model of the methodological process. The model characterises the mechanisms of organisational problem situations as well as desirable procedural steps. The Weltanschauungen (W's) or "world views" of key actors is recognised as central to the mechanisms involved. Part II describes the experience which prompted the theoretical investigation. Chapter 6 describes the first year of the project. The success of this stage is attributed to the predominance of a single W. Chapter 7 describes the changes in the organisation which made the remaining phase of the project difficult. These difficulties are attributed to a failure to recognise the importance of differing W's. Part III revisits the theoretical and organisational issues. Chapter 8 identifies a range of techniques embodying W's which are compatible with .the framework of Part I and which might usefully supplement it. Chapter 9 characterises possible W's in the sponsoring organisation. Throughout the work, an attempt 1s made to reflect the process as well as the product of the author's leaving.

An approach to the development of expert systems within production planning and control

The thesis presents an account of an attempt to utilize expert systems within the domain of production planning and control. The use of expert systems was proposed due to the problematical nature of a particular function within British Steel Strip Products' Operations Department: the function of Order Allocation, allocating customer orders to a production week and site. Approaches to tackling problems within production planning and control are reviewed, as are the general capabilities of expert systems. The conclusions drawn are that the domain of production planning and control contains both `soft' and `hard' problems, and that while expert systems appear to be a useful technology for this domain, this usefulness has by no means yet been demonstrated. Also, it is argued that the main stream methodology for developing expert systems is unsuited for the domain. A problem-driven approach is developed and used to tackle the Order Allocation function. The resulting system, UAAMS, contained two expert components. One of these, the scheduling procedure was not fully implemented due to inadequate software. The second expert component, the product routing procedure, was untroubled by such difficulties, though it was unusable on its own; thus a second system was developed. This system, MICRO-X10, duplicated the function of X10, a complex database query routine used daily by Order Allocation. A prototype version of MICRO-X10 proved too slow to be useful but allowed implementation and maintenance issues to be analysed. In conclusion, the usefulness of the problem-driven approach to expert systems development within production planning and control is demonstrated but restrictions imposed by current expert system software are highlighted in that the abilities of such software to cope with `hard' scheduling constructs and also the slow processing speeds of such software can restrict the current usefulness of expert systems within production planning and control.

Modelling manufacturing planning and control systems:the application of object-oriented principles and discrete-event simulation

Manufacturing planning and control systems are fundamental to the successful operations of a manufacturing organisation. 10 order to improve their business performance, significant investment is made by companies into planning and control systems; however, not all companies realise the benefits sought Many companies continue to suffer from high levels of inventory, shortages, obsolete parts, poor resource utilisation and poor delivery performance. This thesis argues that the fit between the planning and control system and the manufacturing organisation is a crucial element of success. The design of appropriate control systems is, therefore, important. The different approaches to the design of manufacturing planning and control systems are investigated. It is concluded that there is no provision within these design methodologies to properly assess the impact of a proposed design on the manufacturing facility. Consequently, an understanding of how a new (or modified) planning and control system will perform in the context of the complete manufacturing system is unlikely to be gained until after the system has been implemented and is running. There are many modelling techniques available, however discrete-event simulation is unique in its ability to model the complex dynamics inherent in manufacturing systems, of which the planning and control system is an integral component. The existing application of simulation to manufacturing control system issues is limited: although operational issues are addressed, application to the more fundamental design of control systems is rarely, if at all, considered. The lack of a suitable simulation-based modelling tool does not help matters. The requirements of a simulation tool capable of modelling a host of different planning and control systems is presented. It is argued that only through the application of object-oriented principles can these extensive requirements be achieved. This thesis reports on the development of an extensible class library called WBS/Control, which is based on object-oriented principles and discrete-event simulation. The functionality, both current and future, offered by WBS/Control means that different planning and control systems can be modelled: not only the more standard implementations but also hybrid systems and new designs. The flexibility implicit in the development of WBS/Control supports its application to design and operational issues. WBS/Control wholly integrates with an existing manufacturing simulator to provide a more complete modelling environment.

Plant oils as fuels for compression ignition engines: a technical review and life-cycle analysis

As an alternative fuel for compression ignition engines, plant oils are in principle renewable and carbon-neutral. However, their use raises technical, economic and environmental issues. A comprehensive and up-to-date technical review of using both edible and non-edible plant oils (either pure or as blends with fossil diesel) in CI engines, based on comparisons with standard diesel fuel, has been carried out. The properties of several plant oils, and the results of engine tests using them, are reviewed based on the literature. Findings regarding engine performance, exhaust emissions and engine durability are collated. The causes of technical problems arising from the use of various oils are discussed, as are the modifications to oil and engine employed to alleviate these problems. The review shows that a number of plant oils can be used satisfactorily in CI engines, without transesterification, by preheating the oil and/or modifying the engine parameters and the maintenance schedule. As regards life-cycle energy and greenhouse gas emission analyses, these reveal considerable advantages of raw plant oils over fossil diesel and biodiesel. Typical results show that the life-cycle output-to-input energy ratio of raw plant oil is around 6 times higher than fossil diesel. Depending on either primary energy or fossil energy requirements, the life-cycle energy ratio of raw plant oil is in the range of 2–6 times higher than corresponding biodiesel. Moreover, raw plant oil has the highest potential of reducing life-cycle GHG emissions as compared to biodiesel and fossil diesel.

Advances in predicting and manipulating the immunogenicity of biotherapeutics and vaccines

Therapeutic proteins are vital to the future of human health provision and the survival and profitability of the global pharmaceutical industry. Returns from protein therapeutics are experiencing unprecedented growth: both their number and their economic dividend have increased by an order of magnitude in the last 10 years. The potential immunogenicity of protein therapeutics raises many clinical and safety concerns. Many poorly understood factors relating to both product and host affect immune responses. Available laboratory measurement of immunogenicity is of little utility for predicting the clinical properties of biotherapeutics. Coupled with assay variability and standardization issues, this precludes adequate prediction of the biological or clinical responses of therapeutic proteins, arguing for the utilization of informatic strategies in the analysis and prediction of protein immunogenicity. Currently, many unresolved issues must be addressed and thus circumvented before effective prediction can become routine.

Evaluating and developing project-based learning:an empirical approach to evaluating CDIO

As a global profession, engineering is integral to the maintenance and further development of society. Indeed, contemporary social problems requiring engineering solutions are not only a consequence of natural and ‘manmade’ disasters (such as the Japanese earthquake or the oil leakage in the Gulf of Mexico) but also encapsulate 21st Century dilemmas around sustainability, poverty and pollution [2,6,7]. Given the complexity of such problems and the constant need for innovation, the demand for engineering education to provide a ready supply of suitably qualified engineering graduates, able to make innovative decisions has never been higher [3,5]. Bearing this in mind, and taking account problems of attrition in engineering education [1,6,4] innovation in the way in which the curriculum is developed and delivered is crucial. CDIO [Conceive, Design, Implement, Operate] provides a potentially ground-breaking solution to such dilemmas. Aimed at equipping students with practical engineering skills supported by the necessary theoretical background, CDIO could potentially change the way engineering is perceived and experienced within higher education. Aston University introduced CDIO into its Mechanical Engineering and Design programmes in October 2011. From its induction, engineering education researchers have ‘shadowed’ the staff responsible for developing and teaching the programme. Utilising an Action Research Design, and adopting a mixed methodological research design, the researchers have worked closely with the teaching team to critically reflect on the processes involved in introducing CDIO into the curriculum. Concurrently, research has been conducted to capture students’ perspectives of CDIO. In evaluating the introduction of CDIO at Aston, the researchers have developed a distinctive research strategy with which to evaluate CDIO. It is the emergent findings from this research that form the basis of this paper. Although early-on in its development CDIO is making a significant difference to engineering education at the University. The paper draws attention to pedagogical, practical and professional issues – discussing each one in turn and in doing so critically analysing the value of CDIO from academic, student and industrial perspectives. The paper concludes by noting that whilst CDIO represents a forwardthinking approach to engineering education, the need for constant innovation in learning and teaching should not be forgotten. Indeed, engineering education needs to put itself at the forefront of pedagogic practice. Providing all-rounded engineers, ready to take on the challenges of the 21st Century!

A bridge too far? Breaching the research/learning and teaching nexus in a previously research-led university

The relationship between research and learning and teaching represents what has been described as ‘amongst the most intellectually tangled, managerially complex and politically contentious issues in mass higher education’ (Scott, 2005, p 53). Despite this, arguments that in order to achieve high quality scholarly outcomes, university teachers need to adopt an approach to teaching similar to that of research (i.e. founded upon academic rigour and evidence), has long been discussed in the literature (see for example, Elton, 2005 & Healey, 2000). However, the practicalities of promoting an empirical and evidence-based approach to teaching within a research-led institution makes dealing with the research/learning and teaching nexus a somewhat challenging proposition. Drawing upon the findings of a mixed methodological study, this paper critically analyses the pedagogical, organisational and practical issues encountered by academics and support staff working within a newly established Centre for Learning Innovation and Professional Practice. Comprising an eclectic group of staff drawn from across the five Schools in the University, the Centre is dedicated to enhancing student learning through the development of evidence based teaching practice. Based upon the premise that the promotion of research-led teaching will act to bring teaching and research together, and in doing so enhance students learning experiences (Simmons & Elen 2007), the paper critically analyses the challenges encountered by staff responsible for developing and introducing a new learning & teaching focused organisational strategy (by reflecting on the previous 12 months work). In doing so it makes a significant contribution to current academic theory and debate in the areas of pedagogic practice and organisational management. Focusing specifically on the impact of the new policy on various aspects of university life including, pedagogic practice, student support, staff training, and organisational management, the paper critically addresses the cultural and attitudinal challenges of change management (Kotter, 1996) within a ‘grey-brick’ university. It concludes by arguing that the move towards becoming a more learning-focused university has started to develop an awareness of the positive impact the change initiative is having on the student experience and wider institution; whilst also drawing attention to the organisational challenges ahead.