Microneedle Technology

Microneedles (MNs) are minimally invasive devices consisting of numerous micron-sized projections amassed on a baseplate, designed to enhance transdermal drug delivery. When applied to the skin, the needles puncture the outermost layer, the stratum corneum, forming aqueous conduits through which drugs can diffuse to the dermal microcirculation. With an average length of 50-900 μm, MNs are short enough to avoid stimulation of dermal nerves and do not induce bleeding, yet gain access to the skin's rich microcirculation for drug delivery. MNs have been extensively investigated for drug and vaccine delivery, demonstrating their efficacy at increasing the number of compounds amenable to delivery through the skin. This chapter discusses the materials and fabrication methods involved in MN production, alongside the different types of MN arrays and their delivery capabilities. The field has expanded to consider novel applications of MNs including minimally invasive patient monitoring, ocular delivery and enhanced administration of cosmeceuticals. Patient usage and effects on the skin are also considered in terms of safety, efficacy and acceptability. The next steps in MN development are to focus on the scale-up of manufacturing processes, a challenge considering the number of small-scale methods detailed in the literature. Regulatory guidance is awaited to direct this, alongside provision of clearer patient instruction for safe and effective use of MN devices. MNs have tremendous potential to yield real benefits for patients and industry and with continued research in the key areas highlighted, this will begin to be realised over the next number of years.

A Design & Feasibility Study of the Spaced Learning Programme

Objectives There is evidence from neuroscience, cognitive psychology and educational research that the delivery of a stimulus in a spaced format (over time) rather than a massed format (all at once) leads to more effective learning. This project aimed to pilot spaced learning materials using various spacing lengths for GCSE science by exploring the feasibility of introducing spaced leaning into regular classrooms and by evaluating teacher fidelity to the materials. The spaced learning methods will then be compared with traditional science revision techniques and a programme manual will be produced. Design A feasibility study. Methods A pilot study (4 schools) was carried out to examine the feasibility and teacher fidelity to the materials, using pupil workshops and teacher interviews. A subsequent random assignment experimental study (12 schools) will involve pre and post testing of students on a science attainment measure and a post-test implementation questionnaire. Results The literature review found that longer spacing intervals between repetitions of material (>24 hours) may be optimal for long term memory formation than shorter intervals. A logic model was developed to inform the design of various programme variants for the pilot and experimental study. This paper will report qualitative data from the initial pilot study. Conclusions The paper uses this research project as an example to explain the importance of conducting pilot work and small scale experimental studies to explore the feasibility and inform the design of educational interventions, rather than prematurely moving to RCT type studies.

Ecotoxicological evaluation of pesticide mixtures

Neste trabalho o risco da aplicação de moluscicidas (metaldeído e metiocarbe) para o isópode terrestre Porcellionides pruinosus foi avaliado usando como parâmetros a mortalidade e biomarcadores de exposição. O tempo até à morte dos isópodes (após contacto com os moluscicidas) foi muito curto, especialmente no caso da exposição ao metiocarbe. Os vários biomarcadores revelaram-se úteis para a compreensão do modo de acção dos dois moluscicidas neste isópode, particularmente o efeito do carbamato metiocarbe na inibição da enzima acetilcolinesterase (AChE). Os efeitos de combinações binárias de três produtos de protecção das plantas (PPP) dimetoato, glifosato e espirodiclofeno foram avaliados testando o comportamento de evitamento de P. pruinosus, o sucesso reprodutivo do colêmbolo Folsomia candida e o crescimento das plantas Brassica rapa e Triticum aestivum, usando os dois modelos de referência de concentração de adição (CA) e acção independente (IA). O modelo MIXTOX foi usado para avaliar possíveis desvios (devido a interacções entre os pesticidas) dos dois modelos de referência. Os resultados obtidos permitem constatar que estes PPP quando aplicados segundo a dose recomendada não acarretam efeitos perniciosos para os organismos testados. Foi detectado sinergismo na mistura feita com glifosato e espirodiclofeno no isópode P. pruinosus e na mistura com glifosato e dimetoato na planta T. aestivum. Um ecossistema terrestre em pequena escala (“STEM”) foi desenvolvido, contendo um solo agrícola mediterrânico. Nestes STEM, minhocas (Eisenia andrei), P. pruinosus, B. rapa e “bait-lamina” foram incorporados no sentido de avaliar os efeitos da aplicação de dimetoato com espirodiclofeno e glifosato com dimetoato. A dose recomendada de aplicação dos PPP, quer na exposição individual quer nas misturas binárias não teve quaisquer efeitos nas espécies testadas. As minhocas foram sensíveis à aplicação conjunta de dimetoato com espirodiclofeno (10 vezes a dose recomendada) na sua distribuição vertical ao longo da coluna do STEM, e foi detectado sinergismo (i.e. mais minhocas escaparam do que a predição feita pelo modelo IA). Em todas as misturas binárias feitas com glifosato e dimetoato registou-se um decréscimo no consumo de “bait-lamina”, indicando sinergismo (menos “bait-lamina” consumidos que o esperado). Dos quatro biomarcadores (Catalase, AChE, GST e LPO) avaliados nos isópodes, verificaram-se diferenças significativas na actividade da enzima AChE (quando dimetoato foi aplicado no solo) e LPO (aumento da actividade devido à aplicação de glifosato e dimetoato).

Catalisadores ou precursores de espécies activas à base de molibdénio

Atendendo à produção de epóxidos em larga escala e à sua importância como intermediários versáteis, muita atenção tem sido dada à epoxidação de olefinas. Destaca-se a implementação do processo industrial de epoxidação de propileno em fase líquida com tBHP, usando complexos de molibdénio como catalisadores homogéneos (Halcon-ARCO). Neste trabalho foram investigados novos complexos à base de molibdénio como catalisadores (ou precursores) para epoxidação de olefinas em fase líquida. Foi objecto de estudo a identificação das espécies activas e a estabilidade dos catalisadores através da sua separação no final das reacções catalíticas, caracterização e reutilização. Escolheu-se como reacção modelo a epoxidação do ciscicloocteno com tBHP (em decano, tBHPdec), a 55 ºC. Estendeu-se o estudo dos desempenhos catalíticos a diferentes substratos, oxidantes, solventes e métodos de aquecimento. A maior actividade catalítica foi observada para os complexos [MoO2Cl2L2] (L=ligando dialquilamida), mais estáveis e fáceis de manusear que [MoO2Cl2] e complexos análogos com L {THF, MeCN} (Cap. 2). A partir destes complexos podem-se formar in situ espécies activas intermediárias do tipo [(MoO2ClL2)2(μ-O)]. O complexo [MoO2(Lzol)], Lzol= ligando oxazolina quiral (Cap. 3), é um catalisador estável e versátil, activo para a epoxidação de diversas olefinas (selectividades elevadas para epóxidos, mas enantioselectividades baixas), desidrogenação oxidativa de álcoois e sulfoxidação de sulfuretos. O catalisador foi também reciclado eficientemente, usando um líquido iónico (LI). O complexo iónico [MoO2Cl{HC(3,5-Me2pz)3}]BF4 (Cap.4) converteu-se nos complexos activos [{MoO2(HC(3,5-Me2pz)3)}2(μ-O)](BF4)2, [Mo2O3(O2)2(μ-O){HC(3,5-Me2pz)3}] e [MoO3{HC(3,5-Me2pz)3}]; quando dissolvido num LI, o catalisador foi reciclado com sucesso. A presença de água e o meio oxidante influenciaram a formação destas espécies. Os complexos [CpMo(CO)3Me] (Cap.5) e [CpMo(CO)2(η3- C3H5)] (Cap.6) originaram espécies activas similares (baseado nos testes catalíticos e nos espectros FT-IR ATR dos sólidos recuperados). Para [Cp'Mo(CO)2(η3-C3H5)], a influência do Cp' na actividade catalítica sugeriu a formação de espécies activas com este ligando. A partir dos complexos [Mo(CO)4L] formaram-se in situ catalisadores estáveis, que podem ser heterogéneos: para L=2-[3(5)-pirazolil]piridina formou-se [Mo4O12L4]; para L=[3- (2-piridil)-1-pirazolil]acetato de etilo formou-se [Mo8O24L4] (Cap.7). O uso de microondas (MO) como método de aquecimento em vez de um banho de óleo (BO) resultou no aumento da velocidade da reacção catalítica, devido ao aquecimento mais rápido da mistura reaccional (Caps. 5 e 7). A utilização da solução aquosa de tBHP em vez de tBHPdec era preferível, porque excluía o decano do sistema reaccional e mantinham-se elevados os rendimentos em epóxido (Caps. 2 e 6); optimizou-se o desempenho catalítico removendo a água das misturas reaccionais (Caps. 4 e 7). O melhor resultado para a epoxidação de limoneno foi observado para [CpMoCO3Me]: 88% de rendimento em epóxido (2 h, 55 ºC, método de aquecimento MO).

Modeling the Western Iberian margin circulation: present and future

The purpose of this work is to carry out a comprehensive study on the Western Iberian Margin (WIM) circulation my means of numerical modeling, and to postulate what this circulation will be in the future. The adopted approach was the development of a regional ocean model configuration with high resolution, capable of reproducing the largeand small-scale dynamics of the coastal transition zone. Four numerical experiences were carried out according to these objectives: (1) a climatological run, in order to study the system’s seasonal behavior and its mean state; (2) a run forced with real winds and fluxes for period 2001-2011 in order to study the interannual variability of the system; (3) a run forced with mean fields from Global Climate Models (GCMs) for the present, in order to validate GCMs as adequate forcing for regional ocean modeling; (4) a similar run (3) for period 2071-2100, in order to assess possible consequences of a future climate scenario on the hydrography and dynamics of the WIM. Furthermore, two Lagrangian particle studies were carried out: one in order to trace the origin of the upwelled waters along the WIM; the other in order to portrait the patterns of larval dispersal, accumulation and connectivity. The numerical configuration proved to be adequate in the reproduction of the system’s mean state, seasonal characterization and an interannual variability study. There is prevalence of poleward flow at the slope, which coexists with the upwelling jet during summer, although there is evidence of its shifting offshore, and which is associated with the Mediterranean Water flow at deeper levels, suggesting a barotropic character. From the future climate scenario essay, the following conclusions were drawn: there is general warming and freshening of upper level waters; there is still poleward tendency, and despite the upwellingfavorable winds strengthening in summer the respective coastal band becomes more restricted in width and depth. In what concerns larval connectivity and dispersion along the WIM, diel vertical migration was observed to increase recruitment throughout the domain, and while smooth coastlines are better suppliers, there is higher accumulation where the topography is rougher.

Spatial, temporal and spectral scale of POC estimations for the Kuroshio Extension from satellite based observations in the wintertime

Senior thesis written for Oceanography 444

Risk of Exposure to Airborne Ambrosia Pollen from Local and Distant Sources in Europe – an Example from Denmark

Background. Ambrosia artemisiifolia L. is a noxious invasive alien species in Europe. It is an important aeroallergen and millions of people are exposed to its pollen. Objective. The main aim of this study is to show that atmospheric concentrations of Ambrosia pollen recorded in Denmark can be derived from local or more distant sources. Methods. This was achieved by using a combination of pollen measurements, air mass trajectory calculations using the HYPLIT model and mapping all known Ambrosia locations in Denmark and relating them to land cover types. Results. The annual pollen index recorded in Copenhagen during a 15-year period varied from a few pollen grains to more than 100. Since 2005, small quantities of Ambrosia pollen has been observed in the air every year. We have demonstrated, through a combination of Lagrangian back-trajectory calculations and atmospheric pollen measurements, that pollen arrived in Denmark via long-distance transport from centres of Ambrosia infection, such as the Pannonian Plain and Ukraine. Combining observations with results from a local scale dispersion model show that it is possible that Ambrosia pollen could be derived from local sources identified within Denmark. Conclusions. The high allergenic capacity of Ambrosia pollen means that only small amounts of pollen are relevant for allergy sufferers, and just a few plants will be sufficient to produce enough pollen to affect pollen allergy sufferers within a short distance from the source. It is necessary to adopt control measures to restrict Ambrosia numbers. Recommendations for the removal of all Ambrosia plants can effectively reduce the amount of local pollen, as long as the population of Ambrosia plants is small.

A Community Hub Approach to Older People’s Housing

Purpose. This paper explores the potential of housing with care schemes to act as community hubs. The analysis highlights a range of benefits, barriers and facilitators. Design/methodology/approach. Data is presented from the ASSET project (Adult Social Services Environments and Settings) which used a mixed methods approach including a review of the literature, surveys and in-depth case study interviews. Findings. Most housing with care schemes have a restaurant or café, communal lounge, garden, hairdresser, activity room and laundrette, while many also have a library, gym, computer access and a shop. Many of these facilities are open not just to residents but also to the wider community, reflecting a more integrated approach to community health and adult social care, by sharing access to primary health care and social services between people living in the scheme and those living nearby. Potential benefits of this approach include the integration of older people’s housing, reduced isolation and increased cost effectiveness of local services through economies of scale and by maximising preventative approaches to health and wellbeing. Successful implementation of the model depends on a range of criteria including being located within or close to a residential area and having on-site facilities that are accessible to the public. Originality and Value. This paper is part of a very new literature on community hub models of housing with care in the UK. In the light of new requirements under the Care Act to better coordinate community services, it provides insights into how this approach can work and offers an analysis of the benefits and challenges that will be of interest to commissioners and providers as well as planners. This was a small scale research project based on four case studies. Caution should be taken when considering the findings in different settings.

Avaliação económica de sistemas solares fotovoltaicos residenciais

Dissertação para obtenção do grau de Mestre em Engenharia Electrotécnica no Ramo de Energia

Experimental Reinforcement of Wood Beams

Rehabilitation is becoming more and more usual in the construction sector in Portugal. The introduction of newer construction materials and technical know-how of integrating different materials for achieving desired engineering goals is an important step to the development of the sector. Wood industry is also getting more and more adapted to composite technologies with the introduction of the so called “highly engineered wood products” and with the use of modification treatments. This work is an attempt to explain the viability of using stainless steel and glass fibre reinforced polymer (GFRP) as reinforcements in wood beams. This thesis specifically focuses on the flexural behaviour of Portuguese Pine unmodified and modified wood beams. Two types of modification were used: 1,3-dimethylol-4,5- dihydroxyethyleneurea (DMDHEU) resin and amid wax. The behaviour of the material was analysed with a nonlinear model. The latter model simulates the behaviour of the reinforced wood beams under flexural loading. Small-scale beams (1:15) were experimented in flexural bending and the experimental results obtained were compared with the analytical model results. The experiments confirm the viability of the reinforcing schemes and the working procedures. Experimental results showed fair agreement with the nonlinear model. A strength increase between 15% and 80% was achieved. Stiffness increased by 40% to 50% in beams reinforced with steel but no significant increase was achieved with the glass fibre reinforcement.

Desenvolvimento de programação offline e de novos processos robotizados de lixamento

Atualmente a vantagem competitiva de uma empresa passa pela sua rápida adaptação às variações de procura do mercado, sendo necessário garantir elevados níveis de produtividade e, simultaneamente, grande flexibilidade, indispensável ao fabrico de pequenos lotes. A necessidade de ajuste do processo e a diminuição da média de vida do produto levam a paragens cada vez mais frequentes da célula de fabrico para programação e afinação, com consequentes perdas de produtividade. De forma a dar resposta a estes problemas, neste trabalho é testada a viabilidade da utilização da programação e simulação offline de tarefas de lixamento na Grohe Portugal, complementando a solução com o desenvolvimento de um novo método de afinação do programa, permitindo uma adaptação às flutuações do processo produtivo. Para isso foi necessário analisar o estado da arte dos robôs industriais na área de acabamento superficial e respetivos métodos de programação. Em seguida, após um trabalho prévio rigoroso de preparação e modelação da célula de trabalho, é possível fazer a programação offline das várias rotinas e trajetórias complexas que compõem um ciclo de lixamento de um produto, contribuindo para o aumento da qualidade do produto final sem comprometer os níveis de produtividade. Nesta dissertação são descritos e detalhados alguns dos procedimentos fulcrais no sucesso da aplicação deste método de programação. Por último é feita uma nova abordagem ao método de ajuste ponto-a-ponto convencional, desenvolvendo-se para isso um sistema de ajuste automático do programa, dotando o robô da capacidade de se adaptar às variações do processo, assegurando a consistência do mesmo. Foram realizados testes em pequena escala, extrapolando-se os resultados para a aplicação deste novo método no processo produtivo da Grohe Portugal, como forma de complemento ao método convencional de ajuste ponto-a-ponto do programa, reduzindo o tempo de paragem da célula de trabalho.

Production of bacterial biopolymers from industrial fat-containing wastes

Dissertation presented in partial fulfilment of the Requirements for the Degree of Master in Biotechnology

Species distribution models reveal apparent competitive and facilitative effects of a dominant species on the distribution of tundra plants

Abiotic factors are considered strong drivers of species distribution and assemblages. Yet these spatial patterns are also influenced by biotic interactions. Accounting for competitors or facilitators may improve both the fit and the predictive power of species distribution models (SDMs). We investigated the influence of a dominant species, Empetrum nigrum ssp. hermaphroditum, on the distribution of 34 subordinate species in the tundra of northern Norway. We related SDM parameters of those subordinate species to their functional traits and their co-occurrence patterns with E. hermaphroditum across three spatial scales. By combining both approaches, we sought to understand whether these species may be limited by competitive interactions and/or benefit from habitat conditions created by the dominant species. The model fit and predictive power increased for most species when the frequency of occurrence of E. hermaphroditum was included in the SDMs as a predictor. The largest increase was found for species that 1) co-occur most of the time with E. hermaphroditum, both at large (i.e. 750 m) and small spatial scale (i.e. 2 m) or co-occur with E. hermaphroditum at large scale but not at small scale and 2) have particularly low or high leaf dry matter content (LDMC). Species that do not co-occur with E. hermaphroditum at the smallest scale are generally palatable herbaceous species with low LDMC, thus showing a weak ability to tolerate resource depletion that is directly or indirectly induced by E. hermaphroditum. Species with high LDMC, showing a better aptitude to face resource depletion and grazing, are often found in the proximity of E. hermaphroditum. Our results are consistent with previous findings that both competition and facilitation structure plant distribution and assemblages in the Arctic tundra. The functional and co-occurrence approaches used were complementary and provided a deeper understanding of the observed patterns by refinement of the pool of potential direct and indirect ecological effects of E. hermaphroditum on the distribution of subordinate species. Our correlative study would benefit being complemented by experimental approaches.

Multi-scale support vector algorithms for hot spot detection and modelling

The algorithmic approach to data modelling has developed rapidly these last years, in particular methods based on data mining and machine learning have been used in a growing number of applications. These methods follow a data-driven methodology, aiming at providing the best possible generalization and predictive abilities instead of concentrating on the properties of the data model. One of the most successful groups of such methods is known as Support Vector algorithms. Following the fruitful developments in applying Support Vector algorithms to spatial data, this paper introduces a new extension of the traditional support vector regression (SVR) algorithm. This extension allows for the simultaneous modelling of environmental data at several spatial scales. The joint influence of environmental processes presenting different patterns at different scales is here learned automatically from data, providing the optimum mixture of short and large-scale models. The method is adaptive to the spatial scale of the data. With this advantage, it can provide efficient means to model local anomalies that may typically arise in situations at an early phase of an environmental emergency. However, the proposed approach still requires some prior knowledge on the possible existence of such short-scale patterns. This is a possible limitation of the method for its implementation in early warning systems. The purpose of this paper is to present the multi-scale SVR model and to illustrate its use with an application to the mapping of Cs137 activity given the measurements taken in the region of Briansk following the Chernobyl accident.

Comparación de los impactos ambientales y aspectos socioeconómicos de las cadenas de producción de anchoveta

Se presentan los primeros resultados del programa de investigación comparativo sobre las tres flotas pesqueras dedicadas a la extracción de anchoveta en el mar peruano (industrial de acero, industrial de madera y artesanal), así como sus cadenas de suministro hasta el abastecimiento del consumidor. El presente trabajo tiene por objetivo estudiar la sostenibilidad de las actividades involucradas en el suministro de proteínas, considerándose los impactos ambientales y los aspectos socio-económicos. Se realizó un esquema simple de un ecosistema pelágico de afloramiento y de los principales flujos de materia y energía, producto de la explotación humana. El esquema representa la situación peruana y muestra el alto nivel de antropización del sistema, debido al uso de energías fósiles, así como a la explotación y transformación tecnológica de recursos naturales terrestres (minerales, madera, etc.). Por otro lado, se muestra que la explotación del ecosistema marino peruano tiene repercusiones sobre el resto del planeta, debido a la exportación de harina y aceite de pescado destinados principalmente a actividades acuícolas. La flota anchovetera peruana se caracteriza por un amplio rango de tamaño de embarcaciones (de 2 a 600 t de capacidad de bodega); las de tamaño intermedio (30-100 t) son las más numerosas, pero las más grandes (>300 t) son las que acumulan el mayor poder de pesca. Los análisis sobre precios y distribución de la renta entre tripulantes y armadores muestran que, a pesar de que la mayor pesca de anchoveta es realizada por la flota industrial de acero, dedicada a la producción de harina y aceite de pescado y que tiene mayor eficiencia de captura por tripulante, la contribución de la pesca industrial de madera es significativa, pues genera mayor empleo por tonelada capturada y, posiblemente, no ocasiona mayor uso de energía. La pesca artesanal de anchoveta es la menos eficiente energéticamente y por tripulante, pero genera mucho más empleo por tonelada capturada; esta pesca representa menos del 3% de la producción total, del cual sólo una fracción va al consumo humano directo (CHD). Desde el año 2000, los precios de harina y aceite de pescado en los mercados internacionales se han incrementado, debido al aumento de la demanda asiática y al precio del combustible. Se debe estudiar en qué medida este aumento desfavorece el consumo interno de estos productos, así como el uso de anchoveta para CHD. Este análisis deberá ser validado y complementado con información de impacto ambiental; y podrían contribuir a la toma de decisión participativa, para un balance óptimo entre los tres segmentos de la flota y las cadenas de producción asociadas.