968 resultados para paving blocks


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Submarine Landslides: An Introduction 1 By RIo Lee, W.C. Schwab, and J.S. Booth U.S. Atlantic Continental Slope Landslides: Their Distribution, General Anributes, and Implications 14 By J.S. Booth, D.W. O'Leary, Peter Popenoe, and W.W. Danforth Submarine Mass Movement, a Formative Process of Passive Continental Margins: The Munson-Nygren Landslide Complex and the Southeast New England Landslide Complex 23 By D.W. O'Leary The Cape Fear Landslide: Slope Failure Associated with Salt Diapirism and Gas Hydrate Decomposition 40 By Peter Popenoe, E.A. Schmuck, and W.P. Dillon Ancient Crustal Fractures Control the Location and Size of Collapsed Blocks at the Blake Escarpment, East of Florida 54 By W.P. Dillon, J.S. Risch, K.M. Scanlon, P.C. Valentine, and Q.J. Huggett Tectonic and Stratigraphic Control on a Giant Submarine Slope Failure: Puerto Rico Insular Slope 60 By W.C. Schwab, W.W. Danforth, and K.M. Scanlon Slope Failure of Carbonate Sediment on the West Florida Slope 69 By D.C. Twichell, P.C. Valentine, and L.M. Parson Slope Failures in an Area of High Sedimentation Rate: Offshore Mississippi River Delta 79 By J.M. Coleman, D.B. Prior, L.E. Garrison, and H.J. Lee Salt Tectonics and Slope Failure in an Area of Salt Domes in the Northwestern Gulf of Mexico 92 By B.A. McGregor, R.G. Rothwell, N.H. Kenyon, and D.C. Twichell Slope Stability in Regions 01 Sea-Floor Gas Hydrate: Beaufort Sea Continental Slope 97 By R.E. Kayen and H.J. Lee Mass Movement Related to Large Submarine Canyons Along the Beringian Margin, Alaska 104 By P.R. Carlson, H.A. Karl, B.D. Edwards, J.V. Gardner, and R. Hall Comparison of Tectonic and Stratigraphic Control of Submarine Landslides on the Kodiak Upper Continental Slope, Alaska 117 By M.A. Hampton Submarine Landslides That Had a Significant Impact on Man and His Activities: Seward and Valdez, Alaska 123 By M.A. Hampton, R.W. Lemke, and H.W. Coulter Processes Controlling the Style of Mass Movement in Glaciomarine Sediment: Northeastern Gulf of Alaska 135 By W.C. Schwab and H.J. Lee Contents V VI Contents Liquefaction of Continental Shelf Sediment: The Northern California Earthquake of 1980 143 By M.E. Field A Submarine Landslide Associated with Shallow Sea-Floor Gas and Gas Hydrates off Northern California 151 By M.E. Field and J.H. Barber, Jr. Sur Submarine Landslide, a Deep-Water Sediment Slope Failure 158 By C.E. Gutmacher and W.R. Normark Seismically Induced Mudflow in Santa Barbara Basin, California 167 By B.D. Edwards, H.J. Lee, and M.E. Field Submarine Landslides in a Basin and Ridge Setting, Southern California 176 By M.E. Field and B.D. Edwards Giant Volcano-Related Landslides and the Development of the Hawaiian Islands 184 By W.R. Normark, J.G. Moore, and M.E. Torresan Submarine Slope Failures Initiated by Hurricane Iwa, Kahe Point, Oahu, Hawaii 197 By W.R. Normark, Pat Wilde, J.F. Campbell, T.E. Chase, and Bruce Tsutsui (PDF contains 210 pages)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

本文根据面-面接触模型,写出了三维离散元的物理方程及运动方程,对于接触刚度、阻尼系数、时步、计算控制及块体的滑动失稳判据等作了讨论。在NURBM-3D 长方体单元基础上改进了其划分单元的算法,依据岩体中三组真实的节理面划分平行六面体单元,实现了网格的自动剖分,从而可以将单元视为真实的岩块,更客观地体现了节理面对岩体稳定性的影响。运用改进后的三维离散元方法,编制了计算程序,对三峡工程永久船闸高连坡开挖进行了模拟。计算过程包括初始地应力场模拟、岩体开挖过程两个阶段。模拟计算首先给出了为水平、垂直节理面所切割的长方体单元情况下的应力场分析,考证了程序的可行性。将已有的三峡永久船闸实测节理简化为三组节理,完成了初始地应力场的模拟,给出了分四步开挖后的岩体位移场和应力场,计算出岩体开挖过程中产生滑动块体的位置,其结果可以定性地表明:沿节理面的块体滑动是边坡失稳的主要模式。编制的后处理程序提供了计算数据库与绘图软件Origin的接口,可以画出任意剖面或节理面上的应力等值线、位移矢量图及滑动块体分布图,由此可以直观判断岩体不稳定区域和高应力区范围。编制的计算程序在PC机上计算了10万块体单元,用于模拟大型工程,其计算结果与有限元及类似的连续介质模型相比更为合理,为用离散元法进一步研究可变形块体及岩体的蠕变提供了一种切实可行的工具。将离散元法应用于大型工程三维计算是可行的,但在本构模型建立、岩体破坏参数选择等方面均有等于更深入的研究,其结果也有待于更多工程的验证。

Relevância:

10.00% 10.00%

Publicador:

Resumo:

1-42 beta-Amyloid (A beta(1-42)) peptide is a key molecule involved in the development of Alzheimer's disease. Some of its effects are manifested at the neuronal morphological level. These morphological changes involve loss of neurites due to cytoskeleton alterations. However, the mechanism of A beta(1-42) peptide activation of the neurodegenerative program is still poorly understood. Here, A beta(1-42) peptide-induced transduction of cellular death signals through the phosphatidylinositol 3-kinase (PI3K)/phosphoinositol- dependent kinase (PDK)/novel protein kinase C (nPKC)/Rac 1 axis is described. Furthermore, pharmacological inhibition of PDK1 and nPKC activities blocks Rac 1 activation and neuronal cell death. Our results provide insights into an unsuspected connection between PDK1, nPKCs and Rac 1 in the same signal-transduction pathway and points out nPKCs and Rac 1 as potential therapeutic targets to block the toxic effects of A beta(1-42) peptide in neurons.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

302 p. : gráf.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Single and double frozen fillet blocks of Alaska pollack and cod both commercially processed of unknown shelf life were further processed to breaded battered portions. The quality of these fillet portions were compared using sensory (QDA), physical and chemical methods. It was difficult to differentiate between SF and DF fillets by sensory method because of the absence of differences in flavour attributes. While no differences could to be found in the texture of cod fillets, in Alaska pollack fillets some texture attributes were significantly different. These differences could not be verified by instrumental texture measurement. In all cases the lightness was different between SF and DF fillets. Probably, after having fixed L* values for SF fillets of commercially important fish species as limit this could be employed in the future to differentiate between single and double frozen products. Due to the unknown shelf life it is difficult to evaluate the results. Therefore, the investigation of the influence of double freezing on the quality needs a special sample preparation. The use of randomly taken commercially processed samples seems not to be useful.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Carbon nanotubes have unprecedented mechanical properties as defect-free nanoscale building blocks, but their potential has not been fully realized in composite materials due to weakness at the interfaces. Here we demonstrate that through load-transfer-favored three-dimensional architecture and molecular level couplings with polymer chains, true potential of CNTs can be realized in composites as Initially envisioned. Composite fibers with reticulate nanotube architectures show order of magnitude improvement in strength compared to randomly dispersed short CNT reinforced composites reported before. The molecular level couplings between nanotubes and polymer chains results in drastic differences in the properties of thermoset and thermoplastic composite fibers, which indicate that conventional macroscopic composite theory falls to explain the overall hybrid behavior at nanoscale.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

[ES] El objetivo del presente artículo es demostrar y analizar las discrepancias que hubo en el seno de la burguesía guipuzcoana durante los siglos XVIII y XIX en torno a la habilitación de los puertos guipuzcoanos para el comercio directo con América y el traslado de aduanas desde el interior a la costa. Para ello, se acude a la extensa historiografía que se ha ocupado del tema y se hace un análisis crítico de cierto número de representaciones enviadas por el grupo de comerciantes disidentes, con el fin de llevar a cabo un reco- rrido por el debate en torno a ambas cuestiones, que se prolongó desde el advenimiento de la dinastía borbónica hasta los decretos de 1841. A pesar de la visión unívoca que se ha dado del mencionado debate, según la cual parti- ciparon dos bloques perfectamente diferenciados, la documentación muestra una mayor heterogeneidad en las posturas, de manera que en el seno de la burguesía comercial se perciben ciertas divisiones y discrepancias. Si bien es cierto que en un principio los bloques parecen tener un discurso claramente beligerante, aunque también existen todavía puntos de coincidencia, a medi- da que transcurre el tiempo, las posturas se van radicalizando y diversifi- cando, creando una mayor heterogeneidad.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The objective was to study the influence of biological and processing conditions on the evaluation of a conversion factor between fillet length and fish size. This paper presents changes of the length and weight of skinless fillets from various marine fish species in relation to the ice storage time and to the deep freezing / thawing process. The biochemical changes during rigor mortis lead to considerable reduction in length of skinless fillets during ice storage and deep freezing / thawing of fillet blocks. The investigations were undertaken during various cruises of the FFS „Walther Herwig III“.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Swapping sequence elements among related proteins can produce chimeric proteins with novel behaviors and improved properties such as enhanced stability. Although homologous mutations are much more conservative than random mutations, chimeras of distantly-related proteins have a low probability of retaining fold and function. Here, I introduce a new tool for protein recombination that identifies structural blocks that can be swapped among homologous proteins with minimal disruption. This non-contiguous recombination approach enables design of chimeras and libraries of chimeras with less disruption than can be achieved by swapping blocks of sequence. Less disruption means that one can generate libraries with higher fractions of functional enzymes and enables recombination of more distant homologs.

Using this new tool I design and construct many functional chimeric cellulases. I illustrate the structurally conservative nature of this recombination by creating a functional prokaryotic-eukaryotic chimera and solving its structure. I also show how non-contiguous recombination can be used to efficiently identify stabilizing mutations that have been incorporated into homologs in nature.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The cystic fibrosis transmembrane conductance regulator (CFTR) is a chloride channel member of the ATP-binding cassette (ABC) superfamily of membrane proteins. CFTR has two homologous halves, each consisting of six transmembrane spanning domains (TM) followed by a nucleotide binding fold, connected by a regulatory (R) domain. This thesis addresses the question of which domains are responsible for Cl^- selectivity, i.e., which domains line the channel pore.

To address this question, novel blockers of CFTR were characterized. CFTR was heterologously expressed in Xenopus oocytes to study the mechanism of block by two closely related arylaminobenzoates, diphenylamine-2-carboxylic acid (DPC) and flufenamic acid (FFA). Block by both is voltage-dependent, with a binding site ≈ 40% through the electric field of the membrane. DPC and FFA can both reach their binding site from either side of the membrane to produce a flickering block of CFTR single channels. In addition, DPC block is influenced by Cl^- concentration, and DPC blocks with a bimolecular forward binding rate and a unimolecular dissociation rate. Therefore, DPC and FFA are open-channel blockers of CFTR, and a residue of CFTR whose mutation affects their binding must line the pore.

Screening of site-directed mutants for altered DPC binding affinity reveals that TM-6 and TM-12 line the pore. Mutation of residue 5341 in TM-6 abolishes most DPC block, greatly reduces single-channel conductance, and alters the direction of current rectification. Additional residues are found in TM-6 (K335) and TM-12 (T1134) whose mutations weaken or strengthen DPC block; other mutations move the DPC binding site from TM-6 to TM-12. The strengthened block and lower conductance due to mutation T1134F is quantitated at the single-channel level. The geometry of DPC and of the residues mutated suggest α-helical structures for TM-6 and TM-12. Evidence is presented that the effects of the mutations are due to direct side-chain interaction, and not to allosteric effects propagated through the protein. Mutations are also made in TM-11, including mutation S1118F, which gives voltage-dependent current relaxations. The results may guide future studies on permeation through ABC transporters and through other Cl^- channels.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The theories of relativity and quantum mechanics, the two most important physics discoveries of the 20th century, not only revolutionized our understanding of the nature of space-time and the way matter exists and interacts, but also became the building blocks of what we currently know as modern physics. My thesis studies both subjects in great depths --- this intersection takes place in gravitational-wave physics.

Gravitational waves are "ripples of space-time", long predicted by general relativity. Although indirect evidence of gravitational waves has been discovered from observations of binary pulsars, direct detection of these waves is still actively being pursued. An international array of laser interferometer gravitational-wave detectors has been constructed in the past decade, and a first generation of these detectors has taken several years of data without a discovery. At this moment, these detectors are being upgraded into second-generation configurations, which will have ten times better sensitivity. Kilogram-scale test masses of these detectors, highly isolated from the environment, are probed continuously by photons. The sensitivity of such a quantum measurement can often be limited by the Heisenberg Uncertainty Principle, and during such a measurement, the test masses can be viewed as evolving through a sequence of nearly pure quantum states.

The first part of this thesis (Chapter 2) concerns how to minimize the adverse effect of thermal fluctuations on the sensitivity of advanced gravitational detectors, thereby making them closer to being quantum-limited. My colleagues and I present a detailed analysis of coating thermal noise in advanced gravitational-wave detectors, which is the dominant noise source of Advanced LIGO in the middle of the detection frequency band. We identified the two elastic loss angles, clarified the different components of the coating Brownian noise, and obtained their cross spectral densities.

The second part of this thesis (Chapters 3-7) concerns formulating experimental concepts and analyzing experimental results that demonstrate the quantum mechanical behavior of macroscopic objects - as well as developing theoretical tools for analyzing quantum measurement processes. In Chapter 3, we study the open quantum dynamics of optomechanical experiments in which a single photon strongly influences the quantum state of a mechanical object. We also explain how to engineer the mechanical oscillator's quantum state by modifying the single photon's wave function.

In Chapters 4-5, we build theoretical tools for analyzing the so-called "non-Markovian" quantum measurement processes. Chapter 4 establishes a mathematical formalism that describes the evolution of a quantum system (the plant), which is coupled to a non-Markovian bath (i.e., one with a memory) while at the same time being under continuous quantum measurement (by the probe field). This aims at providing a general framework for analyzing a large class of non-Markovian measurement processes. Chapter 5 develops a way of characterizing the non-Markovianity of a bath (i.e.,whether and to what extent the bath remembers information about the plant) by perturbing the plant and watching for changes in the its subsequent evolution. Chapter 6 re-analyzes a recent measurement of a mechanical oscillator's zero-point fluctuations, revealing nontrivial correlation between the measurement device's sensing noise and the quantum rack-action noise.

Chapter 7 describes a model in which gravity is classical and matter motions are quantized, elaborating how the quantum motions of matter are affected by the fact that gravity is classical. It offers an experimentally plausible way to test this model (hence the nature of gravity) by measuring the center-of-mass motion of a macroscopic object.

The most promising gravitational waves for direct detection are those emitted from highly energetic astrophysical processes, sometimes involving black holes - a type of object predicted by general relativity whose properties depend highly on the strong-field regime of the theory. Although black holes have been inferred to exist at centers of galaxies and in certain so-called X-ray binary objects, detecting gravitational waves emitted by systems containing black holes will offer a much more direct way of observing black holes, providing unprecedented details of space-time geometry in the black-holes' strong-field region.

The third part of this thesis (Chapters 8-11) studies black-hole physics in connection with gravitational-wave detection.

Chapter 8 applies black hole perturbation theory to model the dynamics of a light compact object orbiting around a massive central Schwarzschild black hole. In this chapter, we present a Hamiltonian formalism in which the low-mass object and the metric perturbations of the background spacetime are jointly evolved. Chapter 9 uses WKB techniques to analyze oscillation modes (quasi-normal modes or QNMs) of spinning black holes. We obtain analytical approximations to the spectrum of the weakly-damped QNMs, with relative error O(1/L^2), and connect these frequencies to geometrical features of spherical photon orbits in Kerr spacetime. Chapter 11 focuses mainly on near-extremal Kerr black holes, we discuss a bifurcation in their QNM spectra for certain ranges of (l,m) (the angular quantum numbers) as a/M → 1. With tools prepared in Chapter 9 and 10, in Chapter 11 we obtain an analytical approximate for the scalar Green function in Kerr spacetime.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Biological machines are active devices that are comprised of cells and other biological components. These functional devices are best suited for physiological environments that support cellular function and survival. Biological machines have the potential to revolutionize the engineering of biomedical devices intended for implantation, where the human body can provide the required physiological environment. For engineering such cell-based machines, bio-inspired design can serve as a guiding platform as it provides functionally proven designs that are attainable by living cells. In the present work, a systematic approach was used to tissue engineer one such machine by exclusively using biological building blocks and by employing a bio-inspired design. Valveless impedance pumps were constructed based on the working principles of the embryonic vertebrate heart and by using cells and tissue derived from rats. The function of these tissue-engineered muscular pumps was characterized by exploring their spatiotemporal and flow behavior in order to better understand the capabilities and limitations of cells when used as the engines of biological machines.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Signal processing techniques play important roles in the design of digital communication systems. These include information manipulation, transmitter signal processing, channel estimation, channel equalization and receiver signal processing. By interacting with communication theory and system implementing technologies, signal processing specialists develop efficient schemes for various communication problems by wisely exploiting various mathematical tools such as analysis, probability theory, matrix theory, optimization theory, and many others. In recent years, researchers realized that multiple-input multiple-output (MIMO) channel models are applicable to a wide range of different physical communications channels. Using the elegant matrix-vector notations, many MIMO transceiver (including the precoder and equalizer) design problems can be solved by matrix and optimization theory. Furthermore, the researchers showed that the majorization theory and matrix decompositions, such as singular value decomposition (SVD), geometric mean decomposition (GMD) and generalized triangular decomposition (GTD), provide unified frameworks for solving many of the point-to-point MIMO transceiver design problems.

In this thesis, we consider the transceiver design problems for linear time invariant (LTI) flat MIMO channels, linear time-varying narrowband MIMO channels, flat MIMO broadcast channels, and doubly selective scalar channels. Additionally, the channel estimation problem is also considered. The main contributions of this dissertation are the development of new matrix decompositions, and the uses of the matrix decompositions and majorization theory toward the practical transmit-receive scheme designs for transceiver optimization problems. Elegant solutions are obtained, novel transceiver structures are developed, ingenious algorithms are proposed, and performance analyses are derived.

The first part of the thesis focuses on transceiver design with LTI flat MIMO channels. We propose a novel matrix decomposition which decomposes a complex matrix as a product of several sets of semi-unitary matrices and upper triangular matrices in an iterative manner. The complexity of the new decomposition, generalized geometric mean decomposition (GGMD), is always less than or equal to that of geometric mean decomposition (GMD). The optimal GGMD parameters which yield the minimal complexity are derived. Based on the channel state information (CSI) at both the transmitter (CSIT) and receiver (CSIR), GGMD is used to design a butterfly structured decision feedback equalizer (DFE) MIMO transceiver which achieves the minimum average mean square error (MSE) under the total transmit power constraint. A novel iterative receiving detection algorithm for the specific receiver is also proposed. For the application to cyclic prefix (CP) systems in which the SVD of the equivalent channel matrix can be easily computed, the proposed GGMD transceiver has K/log_2(K) times complexity advantage over the GMD transceiver, where K is the number of data symbols per data block and is a power of 2. The performance analysis shows that the GGMD DFE transceiver can convert a MIMO channel into a set of parallel subchannels with the same bias and signal to interference plus noise ratios (SINRs). Hence, the average bit rate error (BER) is automatically minimized without the need for bit allocation. Moreover, the proposed transceiver can achieve the channel capacity simply by applying independent scalar Gaussian codes of the same rate at subchannels.

In the second part of the thesis, we focus on MIMO transceiver design for slowly time-varying MIMO channels with zero-forcing or MMSE criterion. Even though the GGMD/GMD DFE transceivers work for slowly time-varying MIMO channels by exploiting the instantaneous CSI at both ends, their performance is by no means optimal since the temporal diversity of the time-varying channels is not exploited. Based on the GTD, we develop space-time GTD (ST-GTD) for the decomposition of linear time-varying flat MIMO channels. Under the assumption that CSIT, CSIR and channel prediction are available, by using the proposed ST-GTD, we develop space-time geometric mean decomposition (ST-GMD) DFE transceivers under the zero-forcing or MMSE criterion. Under perfect channel prediction, the new system minimizes both the average MSE at the detector in each space-time (ST) block (which consists of several coherence blocks), and the average per ST-block BER in the moderate high SNR region. Moreover, the ST-GMD DFE transceiver designed under an MMSE criterion maximizes Gaussian mutual information over the equivalent channel seen by each ST-block. In general, the newly proposed transceivers perform better than the GGMD-based systems since the super-imposed temporal precoder is able to exploit the temporal diversity of time-varying channels. For practical applications, a novel ST-GTD based system which does not require channel prediction but shares the same asymptotic BER performance with the ST-GMD DFE transceiver is also proposed.

The third part of the thesis considers two quality of service (QoS) transceiver design problems for flat MIMO broadcast channels. The first one is the power minimization problem (min-power) with a total bitrate constraint and per-stream BER constraints. The second problem is the rate maximization problem (max-rate) with a total transmit power constraint and per-stream BER constraints. Exploiting a particular class of joint triangularization (JT), we are able to jointly optimize the bit allocation and the broadcast DFE transceiver for the min-power and max-rate problems. The resulting optimal designs are called the minimum power JT broadcast DFE transceiver (MPJT) and maximum rate JT broadcast DFE transceiver (MRJT), respectively. In addition to the optimal designs, two suboptimal designs based on QR decomposition are proposed. They are realizable for arbitrary number of users.

Finally, we investigate the design of a discrete Fourier transform (DFT) modulated filterbank transceiver (DFT-FBT) with LTV scalar channels. For both cases with known LTV channels and unknown wide sense stationary uncorrelated scattering (WSSUS) statistical channels, we show how to optimize the transmitting and receiving prototypes of a DFT-FBT such that the SINR at the receiver is maximized. Also, a novel pilot-aided subspace channel estimation algorithm is proposed for the orthogonal frequency division multiplexing (OFDM) systems with quasi-stationary multi-path Rayleigh fading channels. Using the concept of a difference co-array, the new technique can construct M^2 co-pilots from M physical pilot tones with alternating pilot placement. Subspace methods, such as MUSIC and ESPRIT, can be used to estimate the multipath delays and the number of identifiable paths is up to O(M^2), theoretically. With the delay information, a MMSE estimator for frequency response is derived. It is shown through simulations that the proposed method outperforms the conventional subspace channel estimator when the number of multipaths is greater than or equal to the number of physical pilots minus one.