937 resultados para passing
Resumo:
The following article has as the main concern and tendency to think and offer some ideas on the Teaching of Philosophy in Brazil and historically conceptions constructed about the philosophy, this constituting itself a challenge to Brazilian education and the formation of people. It is pertinent to the conciliation in the Teaching of Philosophy, from the History of Philosophy, the philosophize and not to join immediately to philosophical systems and their conceptions, but that is structured from the real problems of each situation and experienced in education space and society in general as an macrostructure that requires reflection about your problems. Note that, during the 500 years of education in Brazil, especially in this aspect of Teaching Philosophy characteristics with respect to the concerns and the philosophical problems have been modified, initially, a more obedient to the rules, passing, sometime later, the valorization of polemic and, finally, the systematization of reality and reflection of the real problems faced by a society such as the Brazilian. In this sense, it is proposed to understand and analyze the Teaching of Philosophy in both, the primary and secondary education and, especially, in the university.
Resumo:
Introduction: the improvements on the health area increased the brazilians life expectative. Because of it, more people becomes elder, passing through various common processes of aging, as the balance decrease. Resulting form this the risk of fall increase, and this has a negative impact on the quality of life. As more people become elder the institutionalization tax increase. Objectives: compare the balance and quality of life between institutionalized and non-institutionalized elders; correlate the Berg Balance Scale (BBS) with the Timed Up and Go test (TUG) and with the questionnaire “The Medical Outcome Study 36 – Item Short-Form Health Survey” (SF-36). Methods: were evaluated 20 elders, ten institutionalized (GI) and ten non-institutionalized (GNI). To the balance assessment were used the BBS and the TUG, the quality of life was evaluated using the SF-36. The signifi cance level was set to 5% (p<0,05). The GraphPad Prism 5# was used to analyze the data. To identify the distribution of the data was applied the Shapiro-Wilk test. In the comparison between groups, the normal distributed data were analyzed with the Unpaired Student t test. The non-normal distributed data were analyzed with the Mann-Whitney non-parametric test. The correlations were analyzed with the Pearson (normal data) and Spearman’s (non-normal data) tests. Results: the age average for each group was 72,8±8,36 years (GI) e 67,4±3,53 years (GNI). The GNI had a better performance than the GI in the BBS (*p=0,0017) as in the TUG (*p<0,0002). There wasn’t difference between the quality of life. There was correlation between EEB and TUG (-0,8907 for the GI and -0,7180 for the GNI) and between EEB and the functional capacity domain from the SF-36 (0,7657). Conclusion: the non-institutionalized elders presented best balance. It was found good correlation between TUG and BBS. In the studied sample, to be institutionalized didn’t infl uenced the quality of life.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Horizontal root fractures (HRF) usually affect the anterior teeth as a result of trauma, and generally heal spontaneously, depending on the vitality of the pulp. Diagnosis based on clinical findings, sensitivity tests, and radiographic examination is important to determine the presence of a root fracture and to prevent a root fracture from passing unnoticed. Cone-beam computed tomography (CBCT) has been used successfully for diagnosis and prognosis imaging of root fractures and has proved to be superior to other radiographic methods. This study reports two cases of dental trauma caused by a collision and a sports accident. The patients suffered horizontal root fractures in the maxillary left central incisor and in the mandibular left central incisor. The diagnosis of root fracture was confirmed by cone-beam computed tomography (CBCT) images, which also demonstrated spontaneous healing of the fracture line. The repair occurred by interposition of connective tissue in the former case and by interposition of bone and connective tissue in the latter case. The final diagnoses of both cases were based on CBCT images, indicating the importance of a CBCT examination to reach a firm diagnosis and to follow the healing process of root fracture cases, avoiding unnecessary radical endodontic treatment.
Resumo:
Silicosis, a common type of pneumoconiosis, is an occupational lung disease caused by inhalation of silica dust often with mining activity and thus reaches the miners. The fine and ultrafine silica particles deposited in the alveolar epithelium may lead to the development of progressive massive fibrosis. An increased reactive oxygen species (ROS) production has been proposed to explain the mechanism for induction of pulmonary fibrosis in silicosis. In this situation, alveolar macrophages are activated to phagocytes silica particles deposited in the alveoli. The activated macrophages secrete large amounts of ROS that in turn induce synthesis of fibrotic factors. In addition, the activity of antioxidant enzymes is impaired, which results in increased lipid peroxidation, as well as generating a local inflammatory process. Diffuse pulmonary fibrosis progresses with interstitial collagen deposition. Interstitial collagen overlies small pulmonary arteries and arterioles and thus it is associated with pulmonary hypertension in pulmonary fibrotic diseases. In addition, cytokines and silica particles passing through the respiratory membrane can reach the bloodstream. In this context, the increase in the generation of ROS in the circulation may lead to a reduction in the bioavailability of nitric oxide, an important endothelium-derived relaxing factor. A deficiency in the nitric oxide bioavailability can result in vascular endothelial dysfunction. Moreover, pro-inflammatory cytokines could contribute to the impairment of endothelial function. In the airways, pro-inflammatory cytokines can reduce the smooth muscle responsiveness to β- adrenergic agonists as isoproterenol. Thus, the aim of this study was to evaluate the effect of silica dust instillation in the function of the pulmonary artery, aorta and trachea of rats with acute silicosis. For this purpose, male Wistar rats were anesthetized... (Complete abstract click electronic access below)
Resumo:
The industry produces rolled, starting to and passing through casting forming processes, for example, in the case in question the rolling. A large portion of rolled products are flat, these have specific characteristics during their production and properties after finished that must be analyzed. For this a study of these properties must be made in materials samples, in order to be able to first know the material in question or provide new properties to the material through the process of rolling flat products. In this way is interesting that the students of mechanical engineering have knowledge of rolling trials, and from this can better understand the behavior of rolled. With this purpose the project of a benchtop rolling mill for the rolling of flat is needed, this work is the project of a sizing of one rolling mill non-ferrous materials
Resumo:
Means for milk, not otherwise specified, the product from complete and uninterrupted milking , in a hygienic, healthy cows, well fed and rested. The milk of other animals must be called according to origin of species. One of the main characteristics that defined the milk is the set of their sensory characteristics, and the main flavor. The control of milk quality in Brazil has been an important factor for the consolidation of the entire production chain, passing necessarily by the dairy industry. The production of milk with good quality guarantees, of course, food safety for consumers. The measures to obtain milk begin on the property, in carrying out correct procedures for milking, storage and transportation of the product also in the dairy. Later, in the laboratory evaluation of physicochemical properties, research fraud, and microbiological examinations. Finally, measures of health education are need for producers to become aware of the economic benefits by obtaining a better quality milk. The objective of this review is to emphasize the importance of using diagnostic procedures methods for the control of mastitis and consequently obtain better Milk quality
Resumo:
There are several sources of stress in an individual. The sport, whether practiced as leisure or business, is one of these sources. From this, this review has been made based on the generated stress on everyone involved in a football match. First, presenting what is stress itself, showing that it can be both positive and negative in different individuals, and then what sources of stress specific to that mode, passing from the physical and tactical training, to competition itself , giving special emphasis to the errors caused by refereeing mistakes and they cause in athletes, coaches and team officials
Resumo:
This research aims at the human body as a theme that is explored in different languages by many artists. So here I intend to report the passing of reading and interpretation of the show LIVE BODY: Carousel of Species for sculptural language, so will be examined trajectory of the creative process with a brief overview of the expressive body language through dance / theater exploring ways Created with contributions from studies of Reeducation Method Body Ivaldo Bertazzo, creator, director and choreographer of the piece
Resumo:
This work was done a study to develop a model for definition of hours assembling planes, that were able to meet both the most complete plane, i.e. with the highest number of mounts but also that do not generate an idleness on the line when a plane less complex passing on the Assembly line. The proposed model has great advantages over the current model that the company has been using, as for example: leftover hand-to-hand for assembling airplanes only 10% than the current model raises and an expense to pay the human resource/time of only 6.7% compared with the current model at the company
Resumo:
The gastrointestinal tract is the main route of nutrients absorption and drugs delivery. Is important to know the parameters related to the tract, like gastric emptying and gastrointestinal transit, in order to better understand the behavior of different kind of meals or drugs passing through the GIT. Many techniques are used to study these parameters, such as manometry, scintigraphy, phenol red, activated charcoal and carbon-13 reading. However, these methods use radiation, are invasive and require animal sacrifice. As an alternative proposal, the Alternate Current Biosusceptometry (ACB), a magnetic technique, has proved to be effective for these studies with small animals, in a noninvasive way, low cost, radiation free and avoiding the animal death. Associating the ACB to magnetic micro or nanoparticles used as tracers, it is possible to observe the meal behavior inside of the GIT. Focusing meanly on liquid meals digestion, this paper had the objective to evaluate the efficiency of the ACB technique in gastric emptying and gastrointestinal transit evaluation of liquid meals in rats. To perform the experiments, magnetic nanoparticles (ferrite, MgFe2O4) were used on a 1,5 ml solution introduced by gavage on similar weight and age rats. The sensor made by 2 pairs of coils, capable of generating and detecting magnetic fields, creates a field on the interest place and when this field is in contact with the marked meal, it changes, resulting on a variation of the measured voltage. The voltage variation is analyzed and is obtained a particle concentration on the interest region. The results showed that is possible to apply the ACB technique on the GIT evaluation of liquid particles digestion, gastric emptying and meal cecum arrival time curves were obtained and from that, is possible to observe a pattern of gastrointestinal transit. Both mean process time values were acquired, proving the technique capability of ...
Resumo:
The increasing application of structural composites in the aerospace industry is mainly due to its low specific weight coupled with its excellent mechanical properties when in service. As a result of climatic variations that pass the aircraft is of paramount importance to study the influence of weathering on this type of material when subjected to such changes. The purpose of this work is to evaluate the mechanical behavior of specimens of kevlar fiber /epoxy matrix composites, by dynamic mechanical thermal analysis (DMA) and interlaminar shear strength tests (ILSS), after passing through three environmental conditioning: saline fog, hygrothermal and ultraviolet radiation. From the results, we concluded that the laminate was molded supplied homogeneously, not presenting problems such as porosity, delaminations or cracks inside. After a period of 625 hours of exposure to hygrothermal conditioning, we observed a 1,2% maximum of absorption of moisture. Samples subjected to the conditioning by UV irradiation (600 hours) and salt spray showed a reduction of about 24,30% and 32,30%, respectively, on the shear strength (ILSS). In DMA analysis is not observed significant changes on the glass transition temperature. However, when considering the storage modulus of the samples conditioned by UV radiation (1200 hours), salt spray and hygrothermal conditioning there is an increase of 5,34% , 7,19% and 5,57% respectively
Resumo:
Pós-graduação em Medicina Veterinária - FCAV
Resumo:
Sao Paulo State Research Foundation-FAPESP
Resumo:
In modern days is not practicable to link productivity and profitability without discuss the manufactured products quality. It is of great importance, mainly if the company is looking for a Global Class title, both the product and the process in what it is been fabricated, to attend all the high level quality requirements. This work aims to define the necessary steps for implementing a new project, including the initial viability studies, and then the staff approval, passing through the development of tools and documents necessary to its fabrication, purchasing goods and services to build the installation, and the final stage of implementation, focused on the manufacturing process quality. It will be highlighted a quality tool that helps do decrease the process risks and thereafter increase its reliability after the implementation