Isolation, Culture and Differentiation of Buffaloes Bone Marrow Mesenchymal Stem Cells Obtained from the Coxal Tuberosity

Currently, much attention has been devoted to the renewal of knowledge about Stem Cells and Cell Therapy in domestic species. In this sense, the present work aimed to develop a methodology for collecting, processing and cultivation of mesenchymal stem cells obtained from bone marrow of coxal tuberosity in buffaloes. The collection was performed using a Komiyashiki needle, which was introduced in the coxal tuberosity and the bone marrow aspirated into a heparinized syringe with the aid of negative pressure. Directly after collection samples were processed at the laboratory at FMVZ - UNESP. The samples took approximately 32 days to reach 80% confluence, when the first passage and differentiation was performed. To confirm the mesenchymal origin, cells were induced to differentiate into adipogenic and osteogenic lineages. Samples showed morphological changes during differentiation protocol, but not all presented production of extracellular deposits of calcium or intracellular fat droplets, observed after staining with Alizarin Red and Oil Red respectively. Compared with the material obtained from other species and processed in the same laboratory, the primary culture was longer. Therefore, more studies are needed to standardize the age of animals used and to test other inducers of cell differentiation.

Effects of Dextrose and Lipopolysaccharide on the Corrosion Behavior of a Ti-6Al-4V Alloy with a Smooth Surface or Treated with Double-Acid-Etching

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Inactivation of Matrix-bound Matrix Metalloproteinases by Cross-linking Agents in Acid-etched Dentin

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Plaque control improves the painful symptoms of oral lichen planus gingival lesions. A short-term study

BackgroundLichen planus is a mucocutaneous disease with manifestation in the oral mucosa, the gingiva being one of the most affected regions. In some cases, the lesion may be painful and lead to fragility of the tissues, so that precise diagnosis and adequate treatment are indispensible factors for improving the clinical condition. The aim of this study was to evaluate the effectiveness of plaque control in the improvement of clinical features and painful symptoms of oral lichen planus with gingival involvement.MethodsTwenty patients diagnosed with gingival lichen planus confirmed by histopathological examination were selected. The patients were evaluated by a trained examiner, with regard to the clinical features of the lesions [Index of Escudier etal. (Br J Dermatol, 157, 2007, 765)]; painful symptoms (Visual Analog Scale); and periodontally, as regards the visible plaque and gingival bleeding indices. Periodontal treatment consisted of supragingival scaling and oral hygiene instruction, with professional plaque removal afterward for a period of 4weeks. The entire sample was evaluated at the baseline and at the conclusion of treatment, and the results were analyzed by the Wilcoxon nonparametric test.ResultsThe data demonstrated that the majority of patients were women (90%), with a mean age of 55.9years. Periodontal treatment resulted in statistically significant reduction (P<0.05) in the periodontal indices, with consequent improvement in the clinical features and painful symptoms of the lesions.ConclusionsIt was demonstrated that plaque control was effective in improving the clinical features and painful symptoms of oral lichen planus with gingival involvement.

Effective tooth-bleaching protocols capable of reducing H2O2 diffusion through enamel and dentine

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The influence of photodynamic therapy parameters on the inactivation of Candida spp: in vitro and in vivo studies

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Cultivation of PCV2 in swine testicle cells using the shell vial technique and monitoring of viral replication by qPCR and RT-qPCR

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of Surface Conditioning Modalities on the Repair Bond Strength of Resin Composite to the Zirconia Core / Veneering Ceramic Complex

Purpose: This study evaluated the effect of different surface conditioning protocols on the repair strength of resin composite to the zirconia core / veneering ceramic complex, simulating the clinical chipping phenomenon.Materials and Methods: Forty disk-shaped zirconia core (Lava Zirconia, 3M ESPE) (diameter: 3 mm) specimens were veneered circumferentially with a feldspathic veneering ceramic (VM7, Vita Zahnfabrik) (thickness: 2 mm) using a split metal mold. They were then embedded in autopolymerizing acrylic with the bonding surfaces exposed. Specimens were randomly assigned to one of the following surface conditioning protocols (n = 10 per group): group 1, veneer: 4% hydrofluoric acid (HF) (Porcelain Etch) + core: aluminum trioxide (50-mu m Al2O3) + core + veneer: silane (ESPE-Sil); group 2: core: Al2O3 (50 mu m) + veneer: HF + core + veneer: silane; group 3: veneer: HF + core: 30 mu m aluminum trioxide particles coated with silica (30 mu m SiO2) + core + veneer: silane; group 4: core: 30 mu m SiO2 + veneer: HF + core + veneer: silane. Core and veneer ceramic were conditioned individually but no attempt was made to avoid cross contamination of conditioning, simulating the clinical intraoral repair situation. Adhesive resin (VisioBond) was applied to both the core and the veneer ceramic, and resin composite (Quadrant Posterior) was bonded onto both substrates using polyethylene molds and photopolymerized. After thermocycling (6000 cycles, 5 degrees C-55 degrees C), the specimens were subjected to shear bond testing using a universal testing machine (1 mm/min). Failure modes were identified using an optical microscope, and scanning electron microscope images were obtained. Bond strength data (MPa) were analyzed statistically using the non-parametric Kruskal-Wallis test followed by the Wilcoxon rank-sum test and the Bonferroni Holm correction (alpha = 0.05).Results: Group 3 demonstrated significantly higher values (MPa) (8.6 +/- 2.7) than those of the other groups (3.2 +/- 3.1, 3.2 +/- 3, and 3.1 +/- 3.5 for groups 1, 2, and 4, respectively) (p < 0.001). All groups showed exclusively adhesive failure between the repair resin and the core zirconia. The incidence of cohesive failure in the ceramic was highest in group 3 (8 out of 10) compared to the other groups (0/10, 2/10, and 2/10, in groups 1, 2, and 4, respectively). SEM images showed that air abrasion on the zirconia core only also impinged on the veneering ceramic where the etching pattern was affected.Conclusion: Etching the veneer ceramic with HF gel and silica coating of the zirconia core followed by silanization of both substrates could be advised for the repair of the zirconia core / veneering ceramic complex.

Bonding of Y-TZP to Dentin: Effects of Y-TZP Surface Conditioning, Resin Cement Type, and Aging

Purpose: To evaluate the effects of two surface treatments, aging, and two resin cements on shear bond strength between dentin and yttrium-stabilized tetragonal zirconia polycrystal ceramic (Y-TZP).Materials and Methods: Eighty human molars were embedded in acrylic resin and sectioned 3 mm below the occlusal plane. These teeth and 80 cylindrical Y-TZP specimens (height, 4 mm; diameter, 3.4 mm) were divided into eight groups (n=10) using the following factors: Y-TZP surface treatment (Vi: low-fusing porcelain [vitrification] + hydrofluoric acid etching + silanization or Si: tribochemical silicatization); cementation strategies (PF: Pan avia or CC: Clearfil); and storage (nonaging or aging). Bonding surfaces of 40 Y-TZP specimens received Vi treatment, and the rest received Si treatment. Half of the ceramic-tooth assemblies were cemented with Panavia, the rest with Clearfil. Shear tests were executed using 0.4-mm-thick wire at 0.5 mm/min. Data were analyzed by three-way analysis of variance and Tukey test (alpha=0.05). Fractures were analyzed.Results: Y-TZP surface treatments did not affect bond strength (p=0.762, Vi = Si), while resin cements (p<0.001, Panavia > Clearfil) and aging (p=0.006, nonaging > aging) showed a significant effect. Most failures were in adhesive at dentin-cement interfaces; no failure occurred between zirconia and cement.Conclusion: When Y-TZP ceramic is bonded to dentin, the weakest interface is that between dentin and resin cement. The resin cement/Y-TZP interface was less susceptible to failures, owing to Y-TZP surface treatments.

Benefits of Multimodal Exercise Intervention for Postural Control and Frontal Cognitive Functions in Individuals with Alzheimer's Disease: A Controlled Trial

Objective To verify the effects of a systematized multimodal exercise intervention program on frontal cognitive function, postural control, and functional capacity components of individuals with Alzheimer's disease (AD).DesignNonrandomized controlled trial with pre- and posttraining tests in a training group and a control group.SettingKinesiotherapy program for seniors with AD, SAo Paulo State University.ParticipantsConvenience sample of older adults with AD (n=30) were assigned to a training (n=14; aged 78.67.1) and a control (n=16; aged 77.06.3) group.InterventionThe intervention program was structured with the aim of simultaneously promoting better balance and frontal cognitive capacity. The participants attended a 1-hour session three times a week for 16weeks, whereas the control group did not participate in any activity during the same period.MeasurementsFrontal cognitive function was evaluated using the Montreal Cognitive Assessment, the Clock Drawing Test, the Frontal Assessment Battery, and the Symbol Search Subtest. Postural control (center of pressure area) was analyzed under four dual-task conditions. Functional capacity components were analyzed using the Timed Up and Go Test, the 30-second sit-to-stand test, the sit-and-reach test, and the Berg Functional Balance Scale.ResultsIntervention group participants showed a significant increase in frontal cognitive function (P<.001, partial (2)=0.838), with less body sway (P=.04, partial (2)=0.04) during the dual tasks, and greater functional capacity (P=.001, partial (2)=0.676) after the 16-week period.ConclusionIntervention participants performed better on dual-task activities and had better postural balance and greater functional capacity than controls.

Silicone insulators of power transmission lines with a variable inorganic load concentration: Electrical and physiochemical analyses

Polymeric insulation is an increasing tendency in projects and maintenance of electrical networks for power distribution and transmission. Electrical power devices (e. g., insulators and surge arresters) developed by using polymeric insulation presents many advantages compared to the prior power components using ceramic insulation, such as: a better performance under high pollution environment; high hydrophobicity; high resistance to mechanical, electrical and chemical stresses. The practice with silicone insulators in polluted environments has shown that the ideal performance is directly related to insulator design and polymer formulation. One of the most common misunderstandings in the design of silicone compounds for insulators is the amount of inorganic load used in their formulation. This paper attempts to clarify how the variation of the inorganic load amount affects physicochemical characteristics of different silicone compounds. The physicochemical evaluation is performed from several measurements, such as: density, hardness, elongation, tensile strength. In addition, the evaluation of the physicochemical structure is carried out using infrared test and scanning electronic microscopy (SEM). The electrical analysis is performed from the electric tracking wheel and erosion test, in agreement with the recommendation of the International Electrotechnical Commission (IEC). (C) 2014 Elsevier Ltd. All rights reserved.

Efeito do laser Nd:Yag no pré-tratamento dentinário e selamento marginal, em restaurações de cimento de ionômero de vidro resina modificado

Pós-graduação em Odontologia Restauradora - ICT

The effect of sets and repetitions of the spirometer by flow in cardiorespiratory parameters

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Strength of 3Y-TZP and feldspathic porcelain subjected to different cooling methods

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bonding durability of dental sealants to deciduous and permanent teeth

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)