Parameter optimization of AC rectangular wave outputs for aluminum cold wire GTAW

The objective of this work was to optimize the parameter setup for GTAW of aluminum using an AC rectangular wave output and continuous feeding. A series of welds was carried-out in an industrial joint, with variation of the negative and positive current amplitude, the negative and positive duration time, the travel speed and the feeding speed. Another series was carried out to investigate the isolate effect of the negative duration time and travel speed. Bead geometry aspects were assessed, such as reinforcement, penetration, incomplete fusion and joint wall bridging. The results showed that currents at both polarities are remarkably more significant than the respective duration times. It was also shown that there is a straight relationship between welding speed and feeding speed and this relationship must be followed for obtaining sound beads. A very short positive duration time is enough for arc stability achievement and when the negative duration time is longer than 5 ms its effect on geometry appears. The possibility of optimizing the parameter selection, despite the high inter-correlation amongst them, was demonstrate through a computer program. An approach to reduce the number of variables in this process is also presented.

Open Access - current developments

Presentation at the Nordic Perspectives on Open Access and Open Science seminar, Helsinki, October 15, 2013

Open science, citizen science, crowd science – promises and challenges

Presentation at the Nordic Perspectives on Open Access and Open Science seminar, Helsinki, October 15, 2013

Open Access in Sweden and the programme OpenAccess.se

Presentation at the Nordic Perspectives on Open Access and Open Science seminar, Helsinki, October 15, 2013

Bridge over troubled water - using the CRIS in building Open Access infrastructures

Presentation at the Nordic Perspectives on Open Access and Open Science seminar, Helsinki, October 15, 2013

Open Access at the Nordic Council of Ministers

Presentation at the Nordic Perspectives on Open Access and Open Science seminar, Helsinki, October 15, 2013

Recent and upcoming developments around the Directory of Open Access Journals (DOAJ)

Presentation at the Nordic Perspectives on Open Access and Open Science seminar, Helsinki, October 15, 2013

Do Open Access journals qualify?

Presentation at the Nordic Perspectives on Open Access and Open Science seminar, Helsinki, October 15, 2013

Open repositories of past, present and future

Presentation at the Nordic Perspectives on Open Access and Open Science seminar, Helsinki, October 15, 2013

How is OpenAIRE supporting open access policies and infrastructures in Europe? A Nordic point of view!

Presentation at the Nordic Perspectives on Open Access and Open Science seminar, Helsinki, October 15, 2013

Open knowledge in science and elsewhere

Presentation at the Nordic Perspectives on Open Access and Open Science seminar, Helsinki, October 15, 2013

Analysis of open CNC architecture for machine tools

The evolution of digital circuit technology, leadind to higher speeds and more reliability allowed the development of machine controllers adapted to new production systems (e.g., Flexible Manufacturing Systems - FMS). Most of the controllers are developed in agreement with the CNC technology of the correspondent machine tool manufacturer. Any alterations or adaptation of their components are not easy to be implemented. The machine designers face up hardware and software restrictions such as lack of interaction among system's elements and impossibility of adding new function. This is due to hardware incompatibility and to software not allowing alterations in the source program. The introduction of open architecture philosophy propitiated the evolution of a new generation of numeric controllers. This brought the conventional CNC technology to the standard IBM - PC microcomputer. As a consequence, the characteristics of the CNC (positioning) and the microcomputer (easy of programming, system configuration, network communication etc) are combined. Some researchers have addressed a flexible structure of software and hardware allowing changes in the hardware basic configuration and all control software levels. In this work, the development of open architecture controllers in the OSACA, OMAC, HOAM-CNC and OSEC architectures is described.

Open innovation: university-industry interaction in Russia

Innovation nowadays is one of the key elements of counties’ competitiveness. In the face of continuous world economic changes, open innovation business model implementation allows many companies to improve and accelerate their innovation processes through collaboration. Universities as traditional sources of knowledge might be involved in such kind of collaboration. In developing countries, which are in transition towards innovation-based economy, as Russia, open innovation business model can serve as a tool to speed up this transition. The Master’s Thesis explores the implementation of open innovation model in collaboration between companies and universities in global scale and particularly in Russia. The study is qualitative and it is based on integrative analysis of literature, secondary data and results of the survey, conducted among Russian universities. In the thesis a model for implementation of open innovation into Triple Helix model is elaborated. The study also explores not very common practice of reverse-directional interaction - from industry to university. The findings of this research show a necessity of solving the identified problems in parallel with implementation of open innovation concept in university-industry collaboration.

Open Repositories 2014 Helsingissä

Jyrki Ilvan esitys Kansalliskirjaston kirjastoverkkopalveluiden Asiantuntijaseminaarissa 26.11.2013 Helsingissä.

Ultimate capacity of stainless steel rectangular hollow section X- joints at low temperatures

Growing demand for stainless steel construction materials has increased the popularity of substitutive materials for austenitic stainless steels. The lean duplex grades have taken their place in building of structures exposed to corrosive environments. Since the duplex grades are relatively new materials, the current codes and norms do not fully cover the newest duplex grades. The joints tested in this thesis were designed and studied according to Eurocode 3, even though all the materials are not yet accepted to the standards. The main objective in this thesis was to determine the differences of the used materials in behaviour under loading at low temperatures. Tests in which the deformation and strength properties of the joints were determined were done at the temperature of -46°C, which is the requirement of temperature for structures designed according to Norsok standards. Results show that replacing the austenitic grade with the lean duplex grade is acceptable.