Analyzing the Effects of the New Renewable Energy Policy in Russia on Investments into Wind, Solar and Small Hydro Power

This thesis presents an analysis of recently enacted Russian renewable energy policy based on capacity mechanism. Considering its novelty and poor coverage by academic literature, the aim of the thesis is to analyze capacity mechanism influence on investors’ decision-making process. The current research introduces a number of approaches to investment analysis. Firstly, classical financial model was built with Microsoft Excel® and crisp efficiency indicators such as net present value were determined. Secondly, sensitivity analysis was performed to understand different factors influence on project profitability. Thirdly, Datar-Mathews method was applied that by means of Monte Carlo simulation realized with Matlab Simulink®, disclosed all possible outcomes of investment project and enabled real option thinking. Fourthly, previous analysis was duplicated by fuzzy pay-off method with Microsoft Excel®. Finally, decision-making process under capacity mechanism was illustrated with decision tree. Capacity remuneration paid within 15 years is calculated individually for each RE project as variable annuity that guarantees a particular return on investment adjusted on changes in national interest rates. Analysis results indicate that capacity mechanism creates a real option to invest in renewable energy project by ensuring project profitability regardless of market conditions if project-internal factors are managed properly. The latter includes keeping capital expenditures within set limits, production performance higher than 75% of target indicators, and fulfilling localization requirement, implying producing equipment and services within the country. Occurrence of real option shapes decision-making process in the following way. Initially, investor should define appropriate location for a planned power plant where high production performance can be achieved, and lock in this location in case of competition. After, investor should wait until capital cost limit and localization requirement can be met, after that decision to invest can be made without any risk to project profitability. With respect to technology kind, investment into solar PV power plant is more attractive than into wind or small hydro power, since it has higher weighted net present value and lower standard deviation. However, it does not change decision-making strategy that remains the same for each technology type. Fuzzy pay-method proved its ability to disclose the same patterns of information as Monte Carlo simulation. Being effective in investment analysis under uncertainty and easy in use, it can be recommended as sufficient analytical tool to investors and researchers. Apart from described results, this thesis contributes to the academic literature by detailed description of capacity price calculation for renewable energy that was not available in English before. With respect to methodology novelty, such advanced approaches as Datar-Mathews method and fuzzy pay-off method are applied on the top of investment profitability model that incorporates capacity remuneration calculation as well. Comparison of effects of two different RE supporting schemes, namely Russian capacity mechanism and feed-in premium, contributes to policy comparative studies and exhibits useful inferences for researchers and policymakers. Limitations of this research are simplification of assumptions to country-average level that restricts our ability to analyze renewable energy investment region wise and existing limitation of the studying policy to the wholesale power market that leaves retail markets and remote areas without our attention, taking away medium and small investment into renewable energy from the research focus. Elimination of these limitations would allow creating the full picture of Russian renewable energy investment profile.

Community-based transconjunctival marginal rotation for cicatricial trachoma in Indians from the Upper Rio Negro basin

The objective of the present study was to describe, for the first time in Brazil, the use by a non-ophthalmologist of a community-based marginal rotation procedure by a posterior approach in the indigenous population from the Upper Rio Negro basin. Seventy-three upper eyelids of 46 Indians (11 males and 35 females) with cicatricial upper eyelid entropion and trichiasis were operated in the Indian communities using a marginal rotational procedure by a posterior approach by a non-ophthalmologist physician who had general surgery experience but only an extremely short period (one week) of ophthalmic training. Subjects were reevaluated 6 months after surgery. Results were classified according to the presence and location of residual trichiasis and symptoms were assessed according to a three-level subjective scale (better, worse or no change). Fifty-six eyelids (76.7%) were free from trichiasis, whereas residual trichiasis was observed in 17 eyelids (23.3%) of 10 subjects. In these cases, trichiasis was either lateral or medial to the central portion of the lid. Of these 10 patients, only 4 reported that the surgery did not improve the irritative symptoms. We conclude that marginal rotation by a posterior approach is an effective and simple procedure with few complications, even when performed by non-specialists. Due to its simplicity the posterior approach is an excellent option for community-based upper eyelid entropion surgery.

Enhancing business-to-business relationship through value co-creation in traditional business sector: A case of building services engineering

This study discusses the significance of having service as a business logic, and more specifically, how value co-creation can be seen as an enhancing phenomenon to business-to-business relationships in traditional business sector. The purpose of this study is to investigate how value cocreation can enhance a business-to-business relationship in the heating, ventilation and airconditioning (HVAC) industry of building services engineering, through three sub-objectives: to identify what is value in the industry, how value is co-created in the industry, and what is value in a business-to-business relationship in the industry. The theoretical part this study consists of academic knowledge and literature related to the concepts of value, value co-creation and business-to-business relationships. In order to research value co-creation and business-to-business relationships in HVAC industry of building services engineering both, metaphorical and conceptual thinking of service dominant (S-D) logic and more managerial approach of service logic (SL), contributed to the theoretical part of the study. The empirical research conducted for this study is based on seven semi-structured interviews, which constituted the holistic, qualitative single case study method chosen for the research. The data was collected in September 2014 from CEOs, managers and owners representing six building services engineering firms. The interviews were analysed with the help of transcriptions, role-ordered matrices and thematic networks. The findings of this study indicate that value in HVAC industry consists of client expertise and supplier expertise. The result of applying client expertise and supplier expertise to the business-to- business relationship is characterized as value-in-reputation, when continuity, interaction, learning and rapport of the business relationship are ensured. As a result, value co-creation in the industry consists of mutual and separate elements, which the client and the supplier apply in the process, in addition to proactive interaction. The findings of this study, together with the final framework, enhance the understanding of the connection existing between value co-creation and business-to-business relationship. The findings suggest that value in the HVAC industry is characterized by both value-in-use and value-inreputation. Value-in-reputation enhances the formation of value-in-use, and consequently, value cocreation enhances the business-to-business relationship. This study thus contributes to the existing knowledge on the concepts of value and value co-creation in business-to-business relationships.

Comparison of conventional Papanicolaou cytology samples with liquid-based cervical cytology samples from women in Pernambuco, Brazil

In the present study, we compared the performance of a ThinPrep cytological method with the conventional Papanicolaou test for diagnosis of cytopathological changes, with regard to unsatisfactory results achieved at the Central Public Health Laboratory of the State of Pernambuco. A population-based, cross-sectional study was performed with women aged 18 to 65 years, who spontaneously sought gynecological services in Public Health Units in the State of Pernambuco, Northeast Brazil, between April and November 2011. All patients in the study were given a standardized questionnaire on sociodemographics, sexual characteristics, reproductive practices, and habits. A total of 525 patients were assessed by the two methods (11.05% were under the age of 25 years, 30.86% were single, 4.4% had had more than 5 sexual partners, 44% were not using contraception, 38.85% were users of alcohol, 24.38% were smokers, 3.24% had consumed drugs previously, 42.01% had gynecological complaints, and 12.19% had an early history of sexually transmitted diseases). The two methods showed poor correlation (k=0.19; 95%CI=0.11–0.26; P<0.001). The ThinPrep method reduced the rate of unsatisfactory results from 4.38% to 1.71% (χ2=5.28; P=0.02), and the number of cytopathological changes diagnosed increased from 2.47% to 3.04%. This study confirmed that adopting the ThinPrep method for diagnosis of cervical cytological samples was an improvement over the conventional method. Furthermore, this method may reduce possible losses from cytological resampling and reduce obstacles to patient follow-up, improving the quality of the public health system in the State of Pernambuco, Northeast Brazil.

Load balancing in P2P smartphone based distributed IoT systems

With the new age of Internet of Things (IoT), object of everyday such as mobile smart devices start to be equipped with cheap sensors and low energy wireless communication capability. Nowadays mobile smart devices (phones, tablets) have become an ubiquitous device with everyone having access to at least one device. There is an opportunity to build innovative applications and services by exploiting these devices’ untapped rechargeable energy, sensing and processing capabilities. In this thesis, we propose, develop, implement and evaluate LoadIoT a peer-to-peer load balancing scheme that can distribute tasks among plethora of mobile smart devices in the IoT world. We develop and demonstrate an android-based proof of concept load-balancing application. We also present a model of the system which is used to validate the efficiency of the load balancing approach under varying application scenarios. Load balancing concepts can be apply to IoT scenario linked to smart devices. It is able to reduce the traffic send to the Cloud and the energy consumption of the devices. The data acquired from the experimental outcomes enable us to determine the feasibility and cost-effectiveness of a load balanced P2P smart phone-based applications.

Sensor communication in Smart cities and regions: An efficient IoT-based remote health monitoring system

Recent advances in Information and Communication Technology (ICT), especially those related to the Internet of Things (IoT), are facilitating smart regions. Among many services that a smart region can offer, remote health monitoring is a typical application of IoT paradigm. It offers the ability to continuously monitor and collect health-related data from a person, and transmit the data to a remote entity (for example, a healthcare service provider) for further processing and knowledge extraction. An IoT-based remote health monitoring system can be beneficial in rural areas belonging to the smart region where people have limited access to regular healthcare services. The same system can be beneficial in urban areas where hospitals can be overcrowded and where it may take substantial time to avail healthcare. However, this system may generate a large amount of data. In order to realize an efficient IoT-based remote health monitoring system, it is imperative to study the network communication needs of such a system; in particular the bandwidth requirements and the volume of generated data. The thesis studies a commercial product for remote health monitoring in Skellefteå, Sweden. Based on the results obtained via the commercial product, the thesis identified the key network-related requirements of a typical remote health monitoring system in terms of real-time event update, bandwidth requirements and data generation. Furthermore, the thesis has proposed an architecture called IReHMo - an IoT-based remote health monitoring architecture. This architecture allows users to incorporate several types of IoT devices to extend the sensing capabilities of the system. Using IReHMo, several IoT communication protocols such as HTTP, MQTT and CoAP has been evaluated and compared against each other. Results showed that CoAP is the most efficient protocol to transmit small size healthcare data to the remote servers. The combination of IReHMo and CoAP significantly reduced the required bandwidth as well as the volume of generated data (up to 56 percent) compared to the commercial product. Finally, the thesis conducted a scalability analysis, to determine the feasibility of deploying the combination of IReHMo and CoAP in large numbers in regions in north Sweden.

Generative Part-Based Gabor Object Detector

Object detection is a fundamental task of computer vision that is utilized as a core part in a number of industrial and scientific applications, for example, in robotics, where objects need to be correctly detected and localized prior to being grasped and manipulated. Existing object detectors vary in (i) the amount of supervision they need for training, (ii) the type of a learning method adopted (generative or discriminative) and (iii) the amount of spatial information used in the object model (model-free, using no spatial information in the object model, or model-based, with the explicit spatial model of an object). Although some existing methods report good performance in the detection of certain objects, the results tend to be application specific and no universal method has been found that clearly outperforms all others in all areas. This work proposes a novel generative part-based object detector. The generative learning procedure of the developed method allows learning from positive examples only. The detector is based on finding semantically meaningful parts of the object (i.e. a part detector) that can provide additional information to object location, for example, pose. The object class model, i.e. the appearance of the object parts and their spatial variance, constellation, is explicitly modelled in a fully probabilistic manner. The appearance is based on bio-inspired complex-valued Gabor features that are transformed to part probabilities by an unsupervised Gaussian Mixture Model (GMM). The proposed novel randomized GMM enables learning from only a few training examples. The probabilistic spatial model of the part configurations is constructed with a mixture of 2D Gaussians. The appearance of the parts of the object is learned in an object canonical space that removes geometric variations from the part appearance model. Robustness to pose variations is achieved by object pose quantization, which is more efficient than previously used scale and orientation shifts in the Gabor feature space. Performance of the resulting generative object detector is characterized by high recall with low precision, i.e. the generative detector produces large number of false positive detections. Thus a discriminative classifier is used to prune false positive candidate detections produced by the generative detector improving its precision while keeping high recall. Using only a small number of positive examples, the developed object detector performs comparably to state-of-the-art discriminative methods.

Evaluation of hygienic-sanitary conditions of hospital nutrition and dietary services from the perspectives of internal and external auditors

The objective of this study was to evaluate the hygienic-sanitary conditions of hospital nutrition and dietary services using external and internal auditors. Eleven hospitals were evaluated for their nutrition and dietary services using an evaluation checklist based on food safety requirements in the current legislation. The checklist was applied by an internal auditor (a technical supervisor) and an external auditor (a professional with experience in food services) between August and October 2011. According to the number of items on the evaluation checklist that were considered adequate, the hospital facilities were ranked as excellent, good, regular, bad, or very bad. The results obtained by the auditors were compared. According to these results, it can be said that most of the hospital nutrition and dietary services were rated as good for overall quality by the internal auditor, while the external auditor classified them as Regular. There was a clear difference between the evaluations of the auditors, both in terms of the number of items considered adequate and the overall requirements' average score. It can be concluded that hospital nutrition and dietary services should meet safety requirements in order to provide food. These facilities should have external audits conducted as a way to prevent routine problems from being perpetuated.

Innovation Ecosystem Perspectives on Financial Services Innovation

The context of financial services has been characterised by changes in the regulatory, technological and societal landscape. Consumers are increasingly interested in mobile payments, crowdfunding and microfinance services, either for themselves or because collaborative consumption is viewed as a more sustainable. Retail branches are re-organised to further meet the expectations of customers, start-ups focusing on technology for financial services (i.e. Fintech) are ever growing and financial services companies reinforce their own innovation practices (e.g. creation of innovation labs or venture capital investment funds). The innovation ecosystem around financial services companies represents the many actors with whom they can co-create and co-produce innovative new services for their customers (or for themselves). The innovation process is no longer a closed internal effort but needs to include external actors from the innovation ecosystem. This topic is especially interesting in a small and open economy where the financial centre takes a prominent place in the economy. The research question is therefore “How does the innovation ecosystem influence the innovation process within financial services companies?”. The influence of the innovation ecosystem on the innovation process within financial service companies mainly comes from its social capital and value creation efforts. However learning to work and exchange in an innovation ecosystem is also expected to influence the innovation process in place. Realizing the potential of the innovation ecosystem requires sufficient capabilities to manage new information coming from the innovation ecosystem. The professional associations provide the necessary coordination among actors in the innovation ecosystem to co-create and appropriate value, while fostering co-evolution within the innovation ecosystem.

Industry specific lifecycle services for process critical motors

This Master’s Thesis examines industrial service business and studies how Global Technical Support Center Finland, part of ABB Oy, can develop its lifecycle services based on availability related customer needs. Focus is in three most business critical industry segments OGP (Oil, Gas and Petrochemical), Power and Metals. The research was conducted as a qualitative case study, including literature review and empirical part. The literature review explores industrial service business, product lifecycle services and related customer needs, product effectiveness and maintenance. This study contains also characteristics of constructive research. Primary material was gathered through internal and external interviews. Both theme and semi-structured interviews were performed. This research has shown that customers have different needs depending of the industry segment where they operate. Most remarkable differences are related to maintenance schedules. The main outcomes of the study are the industry specific lifecycle service models that combine company recommendations with customer specific needs. Other development needs were related to proactivity, condition based monitoring, information sharing and lifecycle estimations.

Consumer perceptions on a content-based digital service:the usage and service quality of Masennusinfo.fi

Kuluttajat käyttävät sisältöpohjaisia digitaalisia palveluita jatkuvasti saadakseen lisää tietoa terveydestään. Samalla he arvioivat käyttämiensä palveluiden laatua. Jotta yritykset voisivat suunnitella ja tarjota parhaita mahdollisia digitaalisia palveluita kuluttajille, yritysten tulisi tunnistaa ja analysoida kuluttajien kokemuksia ja käyttötarkoituksia heidän palveluissaan. Tämän tutkimuksen tarkoituksena on kuvailla kuluttajien näkemyksiä Masennusinfo.fi:stä, joka on sisältöpohjainen digitaalinen palvelu, ja joka tarjoaa käyttäjilleen tietoa masennuksesta. Päämääränä on selvittää, kuinka kuluttajat kokevat lääkeyrityksen tarjoaman palvelun laadun ja mihin tarkoituksiin sitä käytetään. Tutkimuksen tarkoitus voidaan jakaa kolmeen osa-ongelmaan: Mihin tarkoituksiin kuluttajat käyttävät sisältöpohjaisia digitaalisia palveluita? Miten kuluttajat kokevat näiden palveluiden laadun? Kuinka käyttötarkoitus ja koettu laatu eroavat eri käyttäjäryhmissä? Tutkimus toteutetaan web-pohjaisella kyselytutkimuksella. Mittarit tehdään teoreettisen viitekehyksen pohjalta, joka perustuu aikaisempaan tutkimukseen. Tutkimuksen empiirinen osuus suoritetaan pop-up tutkimuksella, joka sijoitetaan tutkittavalle sivustolle antaen näin kaikille palvelun käyttäjille mahdollisuuden vastata kyselyyn. Tulokset osoittavat, että palvelua käyttävät suurimmaksi osaksi naiset, suhteellisen nuoret 16−29- vuotiaat, tai yli keski-ikäiset 50−65-vuotiaat henkilöt, jotka ovat joko työssäkäyviä tai opiskelijoita ja korkeasti koulutettuja. Masennusinfo.fi nähdään laadukkaana palveluna kaikissa käyttäjäryhmissä sekä sen käytettävyyden että sisällön perusteella. Käyttötarkoituksetkin ovat jokseenkin samankaltaisia eri käyttäjäryhmissä. Yleensä palvelua käytetään tiedon hakemiseen sairauden alkuvaiheessa. Löydöksien perusteella esitetään, että palvelua muokataan vastaamaan yhä paremmin sen käyttötarkoituksia ja tyypillistä käyttäjäprofiilia. Koska muutamia pieniä eroja käyttäjäryhmien näkemyksissä havaittiin, palveluiden tuottaja päättää, minkä ryhmän mieltymyksiä se noudattaa.

Modularity in Health and Social Services: Perspectives on Organization and Management

Organizations that provide health and social services operate in a complex and constantly changing environment. Changes occur, for example, in ageing, technology and biotechnology, and customers’ expectations, as well as the global economic situation. Organizations typically aim to adapt the changes by introducing new organizational structures and managerial practices, such as process and lean management. Only recently has there been an interest in evaluating whether organizations providing health and social services could apply modularity in order to respond to some of the changes. The concept of modularity originates from manufacturing, but is applied in many other disciplines, such as information technology and logistics. However, thus far, the literature concerning modularity in health and social services is scarce. Therefore the purpose of this thesis is to increase understanding concerning modularity and the possibilities to apply modularity in the health and social services context. In addition, the purpose is to shed light on the viewpoints that are worth taking into account when considering the application of modularity in the health and social services context. The aim of the thesis is to analyze the way in which the modular structures are applied in the health and social services context and to analyze what advantages and possible barriers, as well as managerial concerns, might occur if modularity is applied in the health and social services context. The thesis is conducted by using multiple methods in order to provide a broad aspect to the topic. A systematic literature review provided solid ground for pre-understanding the topic and supported the formulation of the research questions. Theoretical reasoning provided a general overview of the special characteristics of the health and social services context and their effect on application of modularity. Empirical studies concentrated on managerial concerns of modularity particularly from the perspective of health and social services for the elderly. Results of the thesis reveal that structures in products, services, processes, and organizations are rather modular in health and social services. They can be decomposed in small independent units, while the challenges seem to occur especially in the compatibility of the services. It seems that health and social services managers have recognized this problem and they are increasingly paying attention to this challenge in order to enhance the flexible compatibility of services. Advantages and possible barriers of modularity are explored in this thesis, and from the theoretical perspective it could be argued that modularity seems to be beneficial in the context of health and social services. In fact, it has the potential to alleviate several of the challenges that the health and social services context is confronting. For example, modular structures could support organizations in their challenging task to respond to customers’ increasing demand for heterogeneous services. However, special characteristics of the health and social services context create barriers and provide significant challenges in application of modularity. For example, asymmetry of information, negative externalities, uncertainty of demand, and rigid regulation prevent managers from extensively drawing benefits from modularity. Results also reveal that modularity has managerial implications in health and social service. Modularity has the potential to promote and support new service development and outsourcing. Results also provide insights into network management and increases managerial understanding of different network management strategies. Standardization in health and social services is extensive due to legislation and recommendations. Modularity provides alternative paths to take an advantage of standardization while still ensuring the quality of the services. Based on this thesis, it can be concluded, both from a theoretical perspective and from empirical results concerning modularity in health and social services, that modularity might fit well and be beneficial. However, the special characteristics of the health and social services context prevent some of the benefits of modularity and complicate its application. This thesis contributes to the academic literature on the organization and management of health and social services by describing modularity as an alternative way for organizing and managing health and social services. In addition, it contributes to the literature of modularity by exploring the applicability of modularity in the context of health and social services. It also provides practical contribution to health and social services managers by evaluating the pros and cons of modularity when applied to health and social services.

Value Creation of Professional Services

The aim of this qualitative thesis is to research, how professional services create value, and what are the key factors affecting on this process. A model describing value creation process in professional services will be explained, based on the existing literature and three in depth discussions with professional service representatives. Professional services are such services that are tend to base on problem solving and require high skills and knowledge of a professional. These services often have a consultative or an advisory nature, and they often involve both client and a company in service process. As the service is often delivered in somewhat collaboration so is the value created. The results of this thesis revealed that value is created in collaboration or co-operation in professional services. Therefore, value co-creation, as a concept, is exact to describe the value creation process in professional services. This thesis also revealed that value is co- created in continuous communication between a client and a company and no value or only a little value can be created if there is no effective communication during the professional service process.

How Cloud Services may Enable SMEs to Overcome International Growth Challenges: Finnish SMEs in the IT Industry

Digitalization and technology megatrends such as Cloud services have provided SMEs with a suitable atmosphere and conditions to internationalize and seek for further business growth. There is a limited amount of research on Cloud services from the business perspective and the limitations and challenges SMEs encounter when pursuing international business growth. Thus, the main research question of this study was how Cloud services may enable Finnish SMEs to overcome international growth challenges. The research question was further divided into three sub-questions dealing with matters related to features and characteristics of Cloud services, limitations and challenges Finnish SMEs experience when pursuing international growth of business, and benefits and advantages of utilizing Cloud services to mitigate and suppress international growth challenges. First, the theoretical framework of this study was constructed based on the existing literature on Cloud services, SMEs, and international growth challenges. After this, qualitative research approach and methodology were applied for this study. The data was collected through six semi-structured expert interviews in person with representatives of IBM, Exidio, Big Data Solutions, and Comptel. After analyzing the collected data by applying thematic analysis method, the results were compared with the existing theory and the original framework was modified and complemented accordingly. Resource scarcity, customer base expansion and retention, and lack of courage to try new things and take risks turned out to be major international growth challenges of Finnish SMEs. Due to a number of benefits and advantages of utilizing Cloud services including service automation, consumption-based pricing model, lack of capital expenditures (capex) and huge upfront investments, lightened organization structure, cost savings, speed, accessibility, scalability, agility, geographical expansion potential, global reaching and covering, credibility, partners, enhanced CRM, freedom, and flexibility, it can be concluded that Cloud services can help directly and indirectly Finnish SMEs to mitigate and overcome international growth challenges and enable further business growth.

Social media in the purchasing of knowledge-intensive business services

The purpose of this thesis was to understand how industrial buyers utilize social media in the purchasing of knowledge-intensive business services. By combining theories from past research a theoretical framework was formed to visualize the role of the social media at the different stages of the purchasing process. The subject was approached from the industrial buyers’ perspective instead of the knowledge-intensive business firm. The research was conducted using two qualitative research methods: interviews and netnography. The selected interviewees have been involved in the decision-making unit for purchasing knowledge-intensive business services. Additionally all of them are using various social media. Based on the interviews social media is used merely to support decision-making. Some of the interviewees had also shared their own experiences about the service and collaboration with the service provider with other social media users. Based on the interviews two social media were chosen for closer examination. The findings from netnography support the results from the interviews. The outcome of knowledgeintensive business services is dependable of the professionals. Therefore the information is used during decision-making process to confirm the formed image of the service, and the professionals of the service provider. Information obtained from social media complements information provided by the supplier. Even though the interviewees had not themselves used social media to find information about the service during search process, finding from netnography suggest it to exist. Industrial buyers ask other users’ opinions and experience about the services, and receive recommendations to them. Some recommendations are given publicly, but more discreet information is shared in private conversations. Observations in social media show that industrial buyers might be exposed to triggers to promote problem recognition as well. Companies share news and successful customer cases through their social media profiles, which might affect the industrial buyers, but to confirm this requires further research. The industrial buyers’ use of social media during different purchasing processes of knowledgeintensive business services can be conceptualize based on the findings. This helps companies to create right content to their social media pages, and encourage professionals to develop their networks in social media.