Does birth weight predict childhood diet in the Avon longitudinal study of parents and children?

Study objective: Low birth weight predicts cardiovascular disease in adulthood, and one possible explanation is that children with lower birth weight consume more fat than those born heavier. Therefore, the objective of this study was to investigate associations between birth weight and childhood diet, and in particular, to test the hypothesis that birth weight is inversely related to total and saturated fat intake. Design: Prospective cohort study. Setting: South west England. Participants: A subgroup of children enrolled in the Avon longitudinal study of parents and children, with data on birth weight and also diet at ages 8, 18, 43 months, and 7 years ( 1152, 998, 848, and 771 children respectively). Main results: Associations between birth weight and diet increased in strength from age 8 to 43 months, but had diminished by age 7 years. Fat, saturated fat, and protein intakes were inversely, and carbohydrate intake was positively associated with birth weight at 43 months of age, after adjusting for age, sex, and energy intake. After adjustment for other confounders, all associations were weakened, although there was still a suggestion of a relation with saturated fat ( -0.48 (95% CI -0.97, 0.02) g/day per 500 g increase in birth weight. Similar patterns were seen in boys and girls separately, and when the sample was restricted to those with complete data at all ages. Conclusions: A small inverse association was found between birth weight and saturated fat intake in children at 43 months of age but this was not present at 7 years of age. This study therefore provides little evidence that birth weight modifies subsequent childhood diet.

Weight gained in two years by a population of mid-aged women: how much is too much?

Objective: To establish the prevalence of weight change in mid-aged women over a 2-year period, and to assess the relationship between weight change and physical and mental well-being (SF36) in order to begin debate about the need for quantified standards of weight gain. Design: Prospective study of weight change and well-being over a 2-year period among mid-aged women participating in a large national survey. Subjects: Seven thousand two hundred and seventy women without surgical menopause aged between 45 and 50 years (termed mid-aged), enrolled in the Australian Longitudinal Study on Women's Health. Measurements: Weight change (self-reported weight at two time points) and physical and mental well-being (SF-36) explored using linear regression, while adjusting for potential confounders. Results: Only half the women maintained their weight within 2.25 kg, and one-third gained more than this amount in a 2-year period. While weight gain (>= 2.25 kg) was negatively associated with physical well-being, both weight loss and weight gain were associated with poorer mental well-being. Conclusion: This is the first prospective study using a large, population-based cohort to demonstrate that small changes in weight are associated with changes in well-being in mid-aged Australian women. It provides further evidence of the need for public health messages to specify the actual amount that constitutes weight gain, but further research is needed to establish these standards for the entire population.

Light alloy castings for automotive applications: The case of Al vs Mg

The economical and environmental effects of mass reduction through Al and Mg primary alloys substitutions for cast iron and steel in automotive components are discussed using MF. Ashby's penalty functions method The viability of Mg alloy substitutions for existing Al alloy cast components is also considered. The cost analysis shows that direct, equal-volume, Al alloy substitutions for cast iron and steel are the most feasible in terms of the CAFE liability, followed by substitutions involving flat panels of prescribed stiffness. When the creation of CO2 associated to the production of Al and Mg is considered, the potential gasoline savings over the lifespan of the car compensate for the intrinsic environmental burden of Al in all applications, while electrolytic Mg substitutions for cast iron and steel are feasible for equal volume and panels only. Magnesium produced by the Pidgeon thermal process appears to be too primary energy intensive to be competitive in structural applications. Magnesium substitutions for existing Al alloy beams and panels are generally unviable. The current higher recycling efficiency of Al casting alloys confers Al a significant advantage over Mg alloys.

Effect of physical, chemical and light treatments on germination and growth of tissue-cultured coconuts

The acclimatization and ex vitro establishment of tissue cultured coconut plantlets regenerated either from zygotic or somatic embryos could result to serious losses. Although high germination rates can be achieved in vitro, the survival of zygotic embryo derived plantlets in soil is very low (0-30%). Hence, treatments that could promote development of good quality seedlings having well-developed shoot and root is needed to increase seedling survival ex vitro. The effect of physical, chemical and light quality treatments on germination and growth of coconut embryos and tissue-cultured seedlings respectively, was investigated. The germination of coconut embryos was promoted when placed in a liquid Euwens (Y3) medium and incubated using a roller drum. Gibberellic acid (GA3) significantly affected growth of seedlings as it promoted shoot elongation, shoot and root expansion, and fresh and dry weight increase. However, GA3 did not significantly affect germination. In addition, the blue, red and yellow light significantly affected growth of seedlings as it promoted leaf and shoot elongation, fresh and dry weight increase, and root and leaf production. These conditions could be used to improve the growth and survival ex vitro of tissue cultured coconuts.

Effect of anode material and cavity design on the performance of microcavity OLEDs

We report on the effect of the replacement of the conventional ITO anode with the semitransparent metallic material on the performance of microcavity OLEDs. We performed comprehensive simulations of the emission from microcavity OLEDs consisting of widely used organic materials, N,N′-di(naphthalene-1- yl)-N,N′-diphenylbenzidine (NPB) as a hole transport layer and tris (8-hydroxyquinoline) (Alq3) as emitting and electron transporting layer. Silver and LiF/Al were considered as a cathode, while metallic (Au and Ag) anode was used and simulations were performed on devices with both the metallic and conventional ITO anode. The electroluminescence emission spectra, electric field distribution inside the device, carrier density, recombination rate and exciton density were calculated as a function of the position of the emission layer. The results show that the metallic anode enhances light output and that optimum emission from a microcavity OLED is achieved when the position of the recombination region is aligned with the antinode of the standing wave inside the cavity. The microcavity OLED devices with Ag/Ag and Ag/Au mirrors were fabricated and characterized. The experimental results have been compared to the simulations and the influence of the different anode, emission region width and position on the performance of microcavity OLEDs was discussed.

Do many hands make light work? How to overcome social loafing and gain motivation in work teams

Purpose – The purpose of this paper is to challenge the assumption that process losses of individuals working in teams are unavoidable. The paper aims to challenge this assumption on the basis of social identity theory and recent research. Design/methodology/approach – The approach adopted in this paper is to review the mainstream literature providing strong evidence for motivation problems of individuals working in groups. Based on more recent literature, innovative ways to overcome these problems are discussed. Findings – A social identity-based analysis and recent findings summarized in this paper show that social loafing can be overcome and that even motivation gains in group work can be expected when groups are important for the individual group members' self-concepts. Practical implications – The paper provides human resource professionals and front-line managers with suggestions as to how individual motivation and performance might be increased when working in teams. Originality/value – The paper contributes to the literature by challenging the existing approach to reducing social loafing, i.e. individualizing workers as much as possible, and proposes a team-based approach instead to overcome motivation problems.

A community-based approach to supply chain design

The role of beneficiaries in the humanitarian supply chain is highlighted in the imperative to meet their needs but disputed in terms of their actual decision-making and purchasing power. This paper discusses the use of a beneficiary-focused, community-based approach in the case of a post-crisis housing reconstruction programme. In the community-based approach, beneficiaries become active members of the humanitarian supply chain. Implications of this community-based approach are discussed in the light of supply chain design and aid effectiveness. © 2010 Taylor & Francis.

The application of expert systems techniques in the design of durable concrete

This thesis describes work done exploring the application of expert system techniques to the domain of designing durable concrete. The nature of concrete durability design is described and some problems from the domain are discussed. Some related work on expert systems in concrete durability are described. Various implementation languages are considered - PROLOG and OPS5, and rejected in favour of a shell - CRYSTAL3 (later CRYSTAL4). Criteria for useful expert system shells in the domain are discussed. CRYSTAL4 is evaluated in the light of these criteria. Modules in various sub-domains (mix-design, sulphate attack, steel-corrosion and alkali aggregate reaction) are developed and organised under a BLACKBOARD system (called DEX). Extensions to the CRYSTAL4 modules are considered for different knowledge representations. These include LOTUS123 spreadsheets implementing models incorporating some of the mathematical knowledge in the domain. Design databases are used to represent tabular design knowledge. Hypertext representations of the original building standards texts are proposed as a tool for providing a well structured and extensive justification/help facility. A standardised approach to module development is proposed using hypertext development as a structured basis for expert systems development. Some areas of deficient domain knowledge are highlighted particularly in the use of data from mathematical models and in gaps and inconsistencies in the original knowledge source Digests.

Design and function of trilobite exoskeletons

The fossil arthropod Class Trilobita is characterised by the possession of a highly mineralised dorsal exoskeleton with an incurved marginal flange (doublure). This cuticle is usually the only part of the organism to be preserved. Despite the common occurrence of trilobites in Palaeozoic sediments, the original exoskeletal mineralogy has not been determined previously. Petrographic data involving over seventy trilobite species, ranging in age from Cambrian to Devonian, together with atomic absorption and stable isotope analyses, indicate a primary low-magnesian calcite composition. Trilobite cuticles exhibit a variety of preservational textures which are related to the different diagenetic realms through which they have passed. A greater knowledge of post-depositional processes and the specific features they produce, has enabled post-mortem artefacts to be distinguished from primary cuticular microstructures. Alterations of the cuticle can either enhance or destroy primary features, and their effects are best observed in thin-sections, both under transmitted light and cathodoluminescence. Well-preserved trilobites often retain primary microstructures such as laminations, canals, and tubercles. These have been examined in stained thin-sections and by scanning electron microscopy, from as wide a range of trilobites as possible. Construction of sensory field maps has shown that although the basic organisation of the exoskeleton is the same in all trilobites, the types of microstructures found, and their distribution is species-specific. The composition, microstructure, and architecture of the trilobite exoskeleton have also been studied from a biomechanical viewpoint. Total cuticle thickness, and the relative proportions of the different layers, together with the overall architecture all affected the mechanical properties of the exoskeleton.

Design and evaluation for the future of m-interaction

Mobile technology has been one of the major growth areas in computing over recent years (Urbaczewski, Valacich, & Jessup, 2003). Mobile devices are becoming increasingly diverse and are continuing to shrink in size and weight. Although this increases the portability of such devices, their usability tends to suffer. Fuelled almost entirely by lack of usability, users report high levels of frustration regarding interaction with mobile technologies (Venkatesh, Ramesh, & Massey, 2003). This will only worsen if interaction design for mobile technologies does not continue to receive increasing research attention. For the commercial benefit of mobility and mobile commerce (m-commerce) to be fully realized, users’ interaction experiences with mobile technology cannot be negative. To ensure this, it is imperative that we design the right types of mobile interaction (m-interaction); an important prerequisite for this is ensuring that users’ experience meets both their sensory and functional needs (Venkatesh, Ramesh, & Massey, 2003). Given the resource disparity between mobile and desktop technologies, successful electronic commerce (e-commerce) interface design and evaluation does not necessarily equate to successful m-commerce design and evaluation. It is, therefore, imperative that the specific needs of m-commerce are addressed–both in terms of design and evaluation. This chapter begins by exploring the complexities of designing interaction for mobile technology, highlighting the effect of context on the use of such technology. It then goes on to discuss how interaction design for mobile devices might evolve, introducing alternative interaction modalities that are likely to affect that future evolution. It is impossible, within a single chapter, to consider each and every potential mechanism for interacting with mobile technologies; to provide a forward-looking flavor of what might be possible, this chapter focuses on some more novel methods of interaction and does not, therefore, look at the typical keyboard and visual display-based interaction which, in essence, stem from the desktop interaction design paradigm. Finally, this chapter touches on issues associated with effective evaluation of m-interaction and mobile application designs. By highlighting some of the issues and possibilities for novel m-interaction design and evaluation, we hope that future designers will be encouraged to “think out of the box” in terms of their designs and evaluation strategies.

Increased expression of proteasome subunits in skeletal muscle of cancer patients with weight loss

Atrophy of skeletal muscle is common in patients with cancer and results in increased morbidity and mortality. In order to design effective therapy the mechanism by which this occurs needs to be elucidated. Most studies suggest that the ubiquitin-proteasome proteolytic pathway is most important in intracellular proteolysis, although there have been no reports on the activity of this pathway in patients with different extents of weight loss. In this report the expression of the ubiquitin-proteasome pathway in rectus abdominis muscle has been determined in cancer patients with weight loss of 0-34% using a competitive reverse transcriptase polymerase chain reaction to measure expression of mRNA for proteasome subunits C2 and C5, while protein expression has been determined by western blotting. Overall, both C2 and C5 gene expression was increased by about three-fold in skeletal muscle of cachectic cancer patients (average weight loss 14.5 ± 2.5%), compared with that in patients without weight loss, with or without cancer. The level of gene expression was dependent on the amount of weight loss, increasing maximally for both proteasome subunits in patients with weight loss of 12-19%. Further increases in weight loss reduced expression of mRNA for both proteasome subunits, although it was still elevated in comparison with patients with no weight loss. There was no evidence for an increase in expression at weight losses less than 10%. There was a good correlation between expression of proteasome 20Sα subunits, detected by western blotting, and C2 and C5 mRNA, showing that increased gene expression resulted in increased protein synthesis. Expression of the ubiquitin conjugating enzyme, E214k, with weight loss followed a similar pattern to that of proteasome subunits. These results suggest variations in the expression of key components of the ubiquitin-proteasome pathway with weight loss of cancer patients, and suggest that another mechanism of protein degradation must be operative for patients with weight loss less than 10%. © 2004 Elsevier Ltd. All rights reserved.

The effects of coloured light filter overlays on reading rates in age-related macular degeneration

Purpose: To determine the effect of coloured light filter overlays on reading rates for people with age-related macular degeneration (AMD). Method: Using a prospective clinical trial design, we examined the null hypothesis that coloured light filter overlays do not improve reading rates in AMD when compared to a clear filter. Reading rates for 12 subjects with non-exudative AMD, associated with a relative scotoma and central fixation (mean age 81 years, SD 5.07 years) were determined using the Rate of Reading Test® (printed, nonsense, lower case sans serif, stationary text) with 10 different, coloured light filter overlays (Intuitive Overlays®; figures in brackets are percentage transmission values); rose (78%), pink (78%), purple (67%), aqua (81%), blue (74%), lime-green (86%), mint-green (85%), yellow (93%), orange (83%) and grey (71%). A clear overlay (Roscolene # 00) (360 cdm-2) with 100% transmittance was used as a control. Results: ANOVA indicated that there was no statistically significant difference in reading rates with the coloured light filter overlays compared to the clear filter. Furthermore, chi-squared analysis indicated that the rose, purple and blue filters had a significantly poorer overall ranking in terms of reading rates compared to the other coloured and clear light filters. Conclusion: Coloured light filter overlays are unlikely to provide a clinically significant improvement in reading rates for people with non-exudative AMD associated with a relative scotoma and central fixation. Copyright © Acta Ophthalmol Scand 2004.

Elevated serum free light chains predict cardiovascular events in type 2 diabetes

OBJECTIVE: Elevated polyclonal serum immunoglobulin free light chains (FLCs; combined FLCκ+FLCλ [cFLC]) are associated with adverse clinical outcomes and increased mortality; we investigated cFLC and cardiovascular disease (CVD) events in type 2 diabetes. RESEARCH DESIGN AND METHODS: In a cohort study of 352 south Asian patients with type 2 diabetes, serum cFLC, high-sensitivity C-reactive protein (hsCRP), and standard biochemistry were measured. CVD events over 2 years were recorded and assessed usingmultiple logistic regression. RESULTS: cFLC levels were elevated significantly in 29 of 352 (8%) patients with CVD events during 2 years of follow-up (50.7 vs. 42.8mg/L; P = 0.004). Inmultivariate analysis, elevated cFLC (>57.2 mg/L) was associated with CVD outcomes (odds ratio 3.3 [95% CI 1.3-8.2]; P = 0.012) and remained significant after adjusting for age, albumin-to-creatinine ratio, diabetes duration, or treatment. CONCLUSIONS: cFLC elevation is a novel marker for CVD outcomes in type 2 diabetes that warrants further investigation. © 2014 by the American Diabetes Association.

Design of a genetic algorithm for bi-objective flow shop scheduling problems with re-entrant jobs

This paper presents a simulated genetic algorithm (GA) model of scheduling the flow shop problem with re-entrant jobs. The objective of this research is to minimize the weighted tardiness and makespan. The proposed model considers that the jobs with non-identical due dates are processed on the machines in the same order. Furthermore, the re-entrant jobs are stochastic as only some jobs are required to reenter to the flow shop. The tardiness weight is adjusted once the jobs reenter to the shop. The performance of the proposed GA model is verified by a number of numerical experiments where the data come from the case company. The results show the proposed method has a higher order satisfaction rate than the current industrial practices.

The Use of Situation Representation when Searching for Solutions in Computer Aided Design Systems

Projects solutions reuse methodology is offered for software development. The main idea consists in connection of the system objective with the situation using the entities which describe the condition of the system in the process of the objective statement. Every situation is associated with one or several design solutions, which can be used at the development. Based on this connection the situation representing language has been created, it lets to express a problem situation using a natural language describe. The similarity measure has been built to compare situations, it is based on the similarity coefficients with adding the absent part weight.