897 resultados para implementation strategy
Resumo:
This study investigated Saudi high school teachers' implementation of ICT in schools. The study also explored the relationship between the teachers' level of TPACK and their implementation of ICT. In the first phase of the study, more than 250 Saudi teachers from Al-Madinah administrative area filled in a four-part self reported questionnaire while in the second, 12 teachers completed semi-structured interviews. Findings from both phases of the study revealed that Saudi high school teachers demonstrated low level of effectiveness of ICT implementation. Among a number of barriers, Teachers' TPACK knowledge was found as the best predictor of the effectiveness of ICT implementation.
Resumo:
This report describes results and conclusions from the monitoring component of the Douglas Shire Council (DSC) water quality project. The components of this project that this report addresses are: • Site selection and installation of in-stream and off-paddock automatic water quality monitoring equipment in the Douglas Shire. • Design of appropriate sampling strategies for automatic stations. • Estimation of loads of suspended sediment, total nitrogen and total phosphorus in rivers and also estimation of the changes in nutrient loads from sugar cane under different fertilizer application rates. • Development of a community-based water quality sampling program to complement the automatic sampling efforts. • Design of an optimised, long-term water quality monitoring strategy.
Resumo:
Electrochemical aptamer-based (E-AB) sensors represent an emerging class of recently developed sensors. However, numerous of these sensors are limited by a low surface density of electrode-bound redox-oligonucleotides which are used as probe. Here we propose to use the concept of electrochemical current rectification (ECR) for the enhancement of the redox signal of E-AB sensors. Commonly, the probe-DNA performs a change in conformation during target binding and enables a nonrecurring charge transfer between redox-tag and electrode. In our system, the redox-tag of the probe-DNA is continuously replenished by solution-phase redox molecules. A unidirectional electron transfer from electrode via surface-linked redox-tag to the solution-phase redox molecules arises that efficiently amplifies the current response. Using this robust and straight-forward strategy, the developed sensor showed a substantial signal amplification and consequently improved sensitivity with a calculated detection limit of 114 nM for ATP, which was improved by one order of magnitude compared with the amplification-free detection and superior to other previous detection results using enzymes or nanomaterials-based signal amplification. To the best of our knowledge, this is the first demonstration of an aptamer-based electrochemical biosensor involving electrochemical rectification, which can be presumably transferred to other biomedical sensor systems.
Resumo:
The network reconfiguration is an important stage of restoring a power system after a complete blackout or a local outage. Reasonable planning of the network reconfiguration procedure is essential for rapidly restoring the power system concerned. An approach for evaluating the importance of a line is first proposed based on the line contraction concept. Then, the interpretative structural modeling (ISM) is employed to analyze the relationship among the factors having impacts on the network reconfiguration. The security and speediness of restoring generating units are considered with priority, and a method is next proposed to select the generating unit to be restored by maximizing the restoration benefit with both the generation capacity of the restored generating unit and the importance of the line in the restoration path considered. Both the start-up sequence of generating units and the related restoration paths are optimized together in the proposed method, and in this way the shortcomings of separately solving these two issues in the existing methods are avoided. Finally, the New England 10-unit 39-bus power system and the Guangdong power system in South China are employed to demonstrate the basic features of the proposed method.
Review of the ACT Road Ready and Road Ready Plus Novice Driver Road Safety Education Course Material
Resumo:
This report documents research that was commissioned in order to review the materials used in the Road Ready program for relevancy and acceptability to the target audiences as part of the implementation of the ACT Road Safety Strategy Action Plan. Relevant literature on young driver crash risk and best practice principles in driver education was reviewed as a first step (Section 2). The evidence for effectiveness of driver education programs in Australia was summarised (Section 3) and a separate review of the use of incentives in relation to driver education was performed. The brief called for an expert review of the materials and delivery design for both the Road Ready and Road Ready Plus programs. This is reported in Section 5, along with the overall recommendations for program improvement. More specific comments on individual modules in the Road Ready program are listed at the end of Section 5. Lastly, feedback from stakeholders, specifically the facilitators and teachers of the programs, as well as former students who have completed the Road Ready program, was sought. Interviews and surveys were conducted with these groups. Summaries of the methods and findings are contained in Section 6.
Resumo:
Rapid development of plug-in hybrid electric vehicles (PHEVs) brings new challenges and opportunities to the power industry. A large number of idle PHEVs can potentially be employed to form a distributed energy storage system for supporting renewable generation. To reduce the negative effects of unsteady renewable generation outputs, a stochastic optimization-based dispatch model capable of handling uncertain outputs of PHEVs and renewable generation is formulated in this paper. The mathematical expectations, second-order original moments, and variances of wind and photovoltaic (PV) generation outputs are derived analytically. Incorporated all the derived uncertainties, a novel generation shifting objective is proposed. The cross-entropy (CE) method is employed to solve this optimal dispatch model. Multiple patterns of renewable generation depending on seasons and renewable market shares are investigated. The feasibility and efficiency of the developed optimal dispatch model, as well as the CE method, are demonstrated with a 33-node distribution system.
Resumo:
A switching control strategy is proposed for single and dual inductor current-fed push-pull converters. The proposed switching control strategy can be used with both current-fed push-pull converters with an active voltage doubler rectifier, or active rectifier, in the secondary side of the isolation transformer. The proposed switching control strategy makes turn-on and turn-off processes of the primary side power switches zero-voltage-switching and zero-current-switching respectively. The soft-switching operation of the single and dual inductor push-pull converters, with both types of active rectifier, is explained. Simulation and experimental results are provided to validate soft switching operation of the current-fed push-pull converters with the proposed switching control strategy.
Resumo:
Unified Communication (UC) is the integration of two or more real time communication systems into one platform. Integrating core communication systems into one overall enterprise level system delivers more than just cost saving. These real-time interactive communication services and applications over Internet Protocol (IP) have become critical in boosting employee accessibility and efficiency, improving customer support and fostering business agility. However, some small and medium-sized businesses (SMBs) are far from implementing this solution due to the high cost of initial deployment and ongoing support. In this paper, we will discuss and demonstrate an open source UC solution, viz. “Asterisk” for use by SMBs, and report on some performance tests using SIPp. The contribution from this research is the provision of technical advice to SMBs in deploying UC, which is manageable in terms of cost, ease of deployment and support.
Resumo:
It is extremely important to ensure that people with disabilities can access information and cultural works on an equal basis with others. Access is fundamentally important to enable people with disabilities to fully participate in economic, social, and political life. This is both a pressing moral imperative and a legal requirement in international law. Australia should take clear steps to affirmatively redress the fundamental inequalities of access that people with disabilities face. This requires a fundamental shift in the way that we think about copyright and disability rights: the mechanisms for enabling access should not be a limited exception to normal distribution, but should instead be strong positive rights that are able to be routinely and practically exercised.
Resumo:
Peer review of teaching is recognized increasingly as one strategy for academic development even though historically peer review of teaching is often unsupported by policy, action and culture in many Australian universities. Higher education leaders report that academics generally do not engage with peer review of teaching in a systematic or constructive manner, and this paper advances and analyses a conceptual model to highlight conditions and strategies necessary for the implementation of sustainable peer review in higher education institutions. The model highlights leadership, development and implementation, which are critical to the success and formation of a culture of peer review of teaching. The work arises from collaborative research funded by the Office for Learning and Teaching to foster and advance a culture of peer review of teaching across several universities in Australia.
Resumo:
As airports continue to become more ‘customer-centric’ their digital customer-facing technologies are increasingly embedded within the passenger journey. This study takes a customer-centric view of airport digital technology by exploring the ways that digital technologies are being applied within airports to improve passenger perspectives of service quality during their journey. The literature review develops a framework encompassing the themes of airport service quality (function, interaction and diversion) and digital strategy. This framework has been applied to six airports exhibiting high service quality. Currently, the findings suggest that the improvement of customer function involves the use of automated and self-service technologies providing passengers greater efficiency and effectiveness during processing points. Additionally, technology to improve experience during wait times may entail either aesthetic qualities, or provide some form of productivity to passengers. Alternatively, customer interaction is influenced by digital technology through constant passenger engagement during their journey. As the research nears completion, the influence of these themes on the framework will become more apparent.
Resumo:
Cloud Computing, based on early virtual computer concepts and technologies, is now itself a maturing technology in the marketplace and it has revolutionized the IT industry, being the powerful platform that many businesses are choosing to migrate their in-premises IT services onto. Cloud solution has the potential to reduce the capital and operational expenses associated with deploying IT services on their own. In this study, we have implemented our own private cloud solution, infrastructure as a service (IaaS), using the OpenStack platform with high availability and a dynamic resource allocation mechanism. Besides, we have hosted unified communication as a service (UCaaS) in the underlying IaaS and successfully tested voice over IP (VoIP), video conferencing, voice mail and instant messaging (IM) with clients located at the remote site. The proposed solution has been developed in order to give advice to bussinesses that want to build their own cloud environment, IaaS and host cloud services and applicatons in the cloud. This paper also aims at providing an alternate option for proprietary cloud solutions for service providers to consider.
Resumo:
This paper details the initial design and planning of a Field Programmable Gate Array (FPGA) implemented control system that will enable a path planner to interact with a MAVLink based flight computer. The design is aimed at small Unmanned Aircraft Vehicles (UAV) under autonomous operation which are typically subject to constraints arising from limited on-board processing capabilities, power and size. An FPGA implementation for the de- sign is chosen for its potential to address such limitations through low power and high speed in-hardware computation. The MAVLink protocol offers a low bandwidth interface for the FPGA implemented path planner to communicate with an on-board flight computer. A control system plan is presented that is capable of accepting a string of GPS waypoints generated on-board from a previously developed in- hardware Genetic Algorithm (GA) path planner and feeding them to the open source PX4 autopilot, while simultaneously respond- ing with flight status information.
Resumo:
This research showed that online counselling has the potential to increase the help-seeking of secondary school students - especially those who suffer from high levels of psychological distress. An investigation of why school counsellors are currently reluctant to provide an online counselling service identified a number of barriers to implementing such a potentially vital service. Response to focus groups and surveys completed by students and school counsellors indicated that more distressed students prefer to use online counselling and they would use it for sensitive topics. School counsellors remain concerned about effectiveness, ethical, legal and privacy issues as well as potential misuse of the service. Recommendations for implementation are made.
Resumo:
China has 85 million people with disabilities, 30% of whom have a physical disability(1). Up to 2006, overall disability rates increased by 0.5% per year, more for males and in rural areas, and rates of physical disability increased by 11.2% per year(2). With population ageing the proportion of people with disability will increase even faster. In May 2014 the 67th World Health Assembly adopted a resolution endorsing the WHO Global Disability Action Plan 2014–2021. One of its three objectives is “to remove barriers and improve access to health services and programmes”. Access to transport contributes to positive health outcomes both directly and indirectly (e.g. access to economic opportunities, which is associated with better health)(3). However, once people with physical disabilities leave their dwellings they are confronted with physical barriers to their mobility, ranging from the condition/provision of paths to the cost/availability of transport and access to buildings. In addition, their mobility restrictions increase their vulnerability as road users, exposing them to a higher risk of injury through road crashes. QUT's School of Public Health and Social Work (PHSW) and and Centre for Accident Research and Road Safety-Queensland (CARRS-Q) CARRS-Q have been collaborating on development of a combined disability audit and road safety access tool that can identify transport barriers and safety issues along the routes taken by people with disabilities, to enable prioritisation of actions to address these issues. There are also spin-off benefits for other road users from addressing the rising toll of disability through road crashes in China(4). The tool has undergone initial proof-of-concept testing in India and Viet Nam, and is currently being assessed in Cambodia and Laos. Given the rapid development of China, increases in rates of physical disability and the impacts of an ageing population, it is proposed to establish collaborative research through the Australia-China Centre for Public Health to (1) tailor the combined road safety audit and disability access tool for use in China; (2) evaluate its use on a sample of routes; (3) develop plans for changes to the routes in consultation with local authorities; (4) evaluate the effectiveness of implemented changes in terms of access and health. 1. Zheng, Q, et al, 2014. Health and Quality of Life Outcomes, 12:25. 2. Zheng, X, et al, 2011. Bull World Health Org, 89:788–797. 3. Götschi, T & Kahlmeier, S, 2011. Integrated Transport, Health, and Sustainability Assessment (INTHESA): Final Report. Institute of Social and Preventive Medicine, University of Zurich. 4. Lin, T, et al, 2013. J Public Health, 35:541–547.