Formation of nanostructured porous Cu-Au surfaces : the influence of cationic sites on (electro)-catalysis

The fabrication of nanostructured bimetallic materials through electrochemical routes offers the ability to control the composition and shape of the final material that can then be effectively applied as (electro)-catalysts. In this work a clean and transitory hydrogen bubble templating method is employed to generate porous Cu–Au materials with a highly anisotropic nanostructured interior. Significantly, the co-electrodeposition of copper and gold promotes the formation of a mixed bimetallic oxide surface which does not occur at the individually electrodeposited materials. Interestingly, the surface is dominated by Au(I) oxide species incorporated within a Cu2O matrix which is extremely effective for the industrially important (electro)-catalytic reduction of 4-nitrophenol. It is proposed that an aurophilic type of interaction takes place between both oxidized gold and copper species which stabilizes the surface against further oxidation and facilitates the binding of 4-nitrophenol to the surface and increases the rate of reaction. An added benefit is that very low gold loadings are required typically less than 2 wt% for a significant enhancement in performance to be observed. Therefore the ability to create a partially oxidized Cu–Au surface through a facile electrochemical route that uses a clean template consisting of only hydrogen bubbles should be of benefit for many more important reactions.

Electrochemical formation of porous copper 7, 7, 8, 8-tetracyanoquinodimethane and copper 2, 3, 5, 6-tetrafluoro-7, 7, 8, 8-tetracyanoquinodimethane honeycomb surfaces with superhydrophobic properties

The electrochemical formation of highly porous CuTCNQ (TCNQ = 7,7,8,8-tetracyanoquinodimethane) and CuTCNQF4 (TCNQF4 = 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane) materials was undertaken via the spontaneous redox reaction between a porous copper template, created using a hydrogen bubbling template technique, and an acetonitrile solution containing TCNQ or TCNQF4. It was found that activation of the surface via vigorous hydrogen evolution that occurs during porous copper deposition and TCNQ mass transport being hindered through the porous network of the copper template influenced the growth of CuTCNQ and CuTCNQF4. This approach resulted in the fabrication of a honeycomb layered type structure where the internal walls consist of very fine crystalline needles or spikes. This combination of microscopic and nanoscopic roughness was found to be extremely beneficial for anti-wetting properties where superhydrophobic materials with contact angles as high as 177° were created. Given that CuTCNQ and CuTCNQF4 have shown potential as molecular based electronic materials in the area of switching and field emission, the creation of a surface that is moisture resistant may be of applied interest.

Method for the production of porous complex metal oxides using a porogen

A method of producing porous complex oxides includes the steps of providing a mixt. of (a) precursor elements suitable to produce the complex oxide, or (b) one or more precursor elements suitable to produce particles of the complex oxide and one or more metal oxide particles; and (c) a particulate carbon-contg. pore-forming material selected to provide pore sizes in the range of 7-250 nm, and treating the mixt. to (i) form the porous complex oxide in which two or more of the precursor elements from (a) above or one or more of the precursor elements and one or more of the metals in the metal oxide particles from (b) above are incorporated into a phase of the complex metal oxide and the complex metal oxide has grain sizes in the range of 1-150 nm, and (ii) removing the pore-forming material under conditions such that the porous structure and compn. of the complex oxide is substantially preserved. The method may be used to produce nonrefractory metal oxides as well. The mixt. further includes a surfactant, or a polymer. [on SciFinder(R)]

Production of porous metal oxides

Porous complex oxides are produced by reacting metal oxide precursors in the presence of a pore-forming material to provide pore sizes in the range of 7-250 nm, followed by removal of the pore-forming material under conditions preserving the structure and compn. of the formed oxides. The pore-forming material are carbon black particles having a particle size of 10-100 nm. The carbon particles are removed from the formed oxide by heating at 100-300°. A surfactant can be added to the reaction mixt. [on SciFinder(R)]

Give some, get some: investigating the relationship between conspicuous donation behaviour on social media and customer value in a blood donation context

Previous research has questioned the role of altruism in charitable donation and suggests that such behaviour is also motivated by self-interest, such as public recognition or emotional satisfaction. Recognising this, not-for-profit organisations have developed strategies that allow individuals to donate conspicuously, and are at an embryonic stage of turning to social media to provide such recognition. Under investigation in this paper, is the relationship between conspicuous donation behaviour (CDB) on social media and customer value, in blood donation. Online survey results, from a sample of 186 Australian blood donors, support the proposed framework. Significant relationships between self-orientated CDB and emotional value, and other-orientated CDB and social value are demonstrated. The findings provide valuable insights into the use of conspicuous donation strategies on social media as a means to add value to the donation experience, and contribute to our understanding into the under-researched areas of CDB and customer value.

In-side-out : photojournalists from community and mainstream media organisations in Brazil's favelas

New media initiatives in Brazil's capital, Rio de Janeiro, are attempting to change mainstream ideas about favelas (poor districts) and their inhabitants. This thesis focuses on two of these initiatives that are being run by non-government organisations, Viva Favela and Imagens do Povo. This study takes an ethnographic and discursive approach to investigating and comparing two categories of professional photographers to determine how their working practices contribute to empowering the people living in Brazil's favelas. While mainstream photojournalists mainly cover human rights abuses in the favelas, community photographers challenge stereotypes by presenting images of the favelas' everyday life.

Teaching digital media to digital natives

The majority of today's undergraduate students are 'digital natives'; a generation born into a world shaped by digital technologies. It is important to understand the significance of this when considering how to teach Digital Media to digital natives. This paper examines the analogies to literacy that recur in digital native debates. It argues that if the concept of digital literacy is to be useful, educators must attend to the multiple layers and proficiencies that comprise literacy. Rather than completely dispose of old teaching methods, updated pedagogical practices should integrate analysis and critique with exploratory and creative modes of learning.

Weibo, framing, and media practices in China

This study uses frames analysis to investigate online discourses and processes of political deliberation on China’s weibo (microblog) service. It offers a comparative analysis of competing discourses surrounding the case of Wang Yue, a toddler who was ran over by two motor vehicles in Foshan, following which eighteen people passed by and ignored her plight. The study aims to understand how weibo facilitate its users to express their differences and deliberate disagreements with each other. The study found that Internet users are rational in the sense that they do not simply lean towards a dichotomised choice of ‘pro-’ or ‘anti-’ official discourse, but they are able to negotiate their moral choices by considering a wide range of social and political factors in such an emotional and morally controversial incident.

Networked masculinities and social networking sites : a call for the analysis of men and contemporary digital media

It is of course recognised that technology can be gendered and implicated in gender relations. However, it continues to be the case that men’s experiences with technology are underexplored and the situation is even more problematic where digital media is concerned. Over the past 30 years we have witnessed a dramatic rise in the pervasiveness of digital media across many parts of the world and as associated with wide ranging aspects of our lives. This rise has been fuelled over the last decade by the emergence of Web 2.0 and particularly Social Networking Sites (SNS). Given this context, I believe it is necessary for us to undertake more work to understand men’s engagements with digital media, the implications this might have for masculinities and the analysis of gender relations more generally. To begin to unpack this area, I engage theorizations of the properties of digital media networks and integrate this with the masculinity studies field. Using this framework, I suggest we need to consider the rise in what I call networked masculinities – those masculinities (co)produced and reproduced with digitally networked publics. Through this analysis I discuss themes related to digital mediators, relationships, play and leisure, work and commerce, and ethics. I conclude that as masculinities can be, and are being, complicated and given agency by advancing notions and practices of connectivity, mobility, classification and convergence, those engaged with masculinity studies and digital media have much to contribute.

Children and information communication technologies in the media : a study using moral panic theory

This thesis is an investigation of the media's representation of children and ICT. The study draws on moral panic theory and Queensland newspaper media, to identify the impact of newspaper reporting on the public's perceptions of young people and ICT.

Community media 2.0 : a report from the 'Co-Creative Communities' forum

Participatory digital culture presents major challenges to all traditional media outlets, but it presents very direct challenges to the community broadcast sector, which was established from the outset as local, community-driven and participatory. These and other issues were the focus of a recent forum at the Australian Centre for the Moving Image in Melbourne (Co-Creative Communities, 8–9 November 2012). The forum was part of a national research project, which has been exploring how Australian community arts and media organisations are responding to participatory digital culture, social media and user-led innovation. Focusing on the organisations who presented at the symposium, the paper examines how community-interest media is making the most of new and social media platforms. It considers examples of participatory digital media that have emerged from the community broadcast sector, but it also considers local, collaborative, community-interest media projects developed by public broadcasters and organisations involved in arts, social justice and development. Drawing on forum transcripts and follow-up research the essay describes some of the key trends shaping how community-interest media organisations and independent producers are working with participatory digital culture, and with what success.

Correlating flow induced shear stress and chondrocytes activity in micro-porous scaffold using computational fluid dynamics and rapid prototyping

Flow induced shear stress plays an important role in regulating cell growth and distribution in scaffolds. This study sought to correlate wall shear stress and chondrocytes activity for engineering design of micro-porous osteochondral grafts based on the hypothesis that it is possible to capture and discriminate between the transmitted force and cell response at the inner irregularities. Unlike common tissue engineering therapies with perfusion bioreactors in which flow-mediated stress is the controlling parameter, this work assigned the associated stress as a function of porosity to influence in vitro proliferation of chondrocytes. D-optimality criterion was used to accommodate three pore characteristics for appraisal in a mixed level fractional design of experiment (DOE); namely, pore size (4 levels), distribution pattern (2 levels) and density (3 levels). Micro-porous scaffolds (n=12) were fabricated according to the DOE using rapid prototyping of an acrylic-based bio-photopolymer. Computational fluid dynamics (CFD) models were created correspondingly and used on an idealized boundary condition with a Newtonian fluid domain to simulate the dynamic microenvironment inside the pores. In vitro condition was reproduced for the 3D printed constructs seeded by high pellet densities of human chondrocytes and cultured for 72 hours. The results showed that cell proliferation was significantly different in the constructs (p<0.05). Inlet fluid velocity of 3×10-2mms-1 and average shear stress of 5.65×10-2 Pa corresponded with increased cell proliferation for scaffolds with smaller pores in hexagonal pattern and lower densities. Although the analytical solution of a Poiseuille flow inside the pores was found insufficient for the description of the flow profile probably due to the outside flow induced turbulence, it showed that the shear stress would increase with cell growth and decrease with pore size. This correlation demonstrated the basis for determining the relation between the induced stress and chondrocyte activity to optimize microfabrication of engineered cartilaginous constructs.