Road damage due to dynamic tyre forces measured on a public road

This paper describes a series of tests conducted on a UK trunk road, in which the dynamic tyre forces generated by over 1500 heavy goods vehicles (HGVs) were measured using a load measuring mat containing 144 capacitive strip sensors. The data was used to investigate the relative road damaging potential of the various classes of vehicles, and the degree of spatial repeatability of tyre forces present in a typical highway fleet. Approximately half the vehicles tested were found to contribute to a spatially repeatable pattern of pavement loading. On average, air suspended vehicles were found to generate lower dynamic load coefficients than steel suspended vehicles. However, air suspended vehicles also generated higher mean levels of theoretical road damage (aggregate force) than steel suspended vehicles, indicating that the ranking of suspensions depends on the pavement damage criterion used.

Modelling failure of composite specimens with defects under compression loading

Composite structures exhibit many different failure mechanisms, but attempts to model composite failure frequently make a priori assumptions about the mechanism by which failure will occur. Wang et al. [1] conducted compressive tests on four configurations of composite specimen manufactured with out-of-plane waviness created by ply-drop defects. There were significantly different failures for each case. Detailed finite element models of these experiments were developed which include competing failure mechanisms. The model predictions correlate well with experimental results-both qualitatively (location of failure and shape of failed specimen) and quantitatively (failure load). The models are used to identify the progression of failure during the compressive tests, determine the critical failure mechanism for each configuration, and investigate the effect of cohesive parameters upon specimen strength. This modelling approach which includes multiple competing failure mechanisms can be applied to predict failure in situations where the failure mechanism is not known in advance. © 2013 Elsevier Ltd. All rights reserved.

Picosecond laser patterning of PEDOT:PSS thin films

Picosecond pulsed laser (10.4 ps, 1064 nm, 5 and 50 kHz) patterning studies were performed, of PEDOT:PSS thin films of varying thickness deposited by spin coating on glass substrates, by ablating the films or by changing locally by laser irradiation the optical and electrical properties of the polymer. From a detailed observation of the morphology of single pulse ablated holes on the surfaces of the films, in combination with simple calculations, it is concluded that photomechanical ablation is the likely ablation mechanism of the films. The single pulse ablation thresholds were measured equal to 0.13-0.18 J/cm 2 for films with thicknesses in the region of ∼100-600 nm. The implications on ablation line patterning of the films using different fluences, scanning speeds and pulse repetition rates, were investigated systematically. Laser irradiation of the films before ablation induces a metal-insulator transition of the polymer because of the formation of charge localization due to a possible creation of molecular disorder in the polymer and shortening of its conjugation length. © 2010 Elsevier B.V. All rights reserved.

Probabilistic modelling of soil moisture dynamics of irrigated cropland in the North China Plain

A probabilistic soil moisture dynamic model is used to estimate the soil moisture probability distribution and plant water stress of irrigated cropland in the North China Plain. Soil moisture and meteorological data during the period of 1998 to 2003 were obtained from an irrigated cropland ecosystem with winter wheat and maize in the North China Plain to test the probabilistic soil moisture dynamic model. Results showed that the model was able to capture the soil moisture dynamics and estimate long-term water balance reasonably well when little soil water deficit existed. The prediction of mean plant water stress during winter wheat and maize growing season quantified the suitability of the wheat-maize rotation to the soil and climate environmental conditions in North China Plain under the impact of irrigation. Under the impact of precipitation fluctuations, there is no significant bimodality of the average soil moisture probability density function.

Distribution and their pollution assessment of heavy metals in the sediments of the Yalu River Estuary and its adjacent coastal waters

The present paper deals with the distribution patterns of heavy metals and the associated influencing factors in the Yalu River Estuary and its adjacent coastal waters. Based upon the analysis of the surficial and core sediments measurements, the pollution of heavy metal and potential ecological risk were evaluated. The burial flux and contents of heavy metals (except for copper) have been continuously increasing since the 1920s. Therefore, the gross potential ecological risk for the sediments was high or very high, and the study area was endangered by heavy metals contamination. Heavy metals originated mainly from upstream pollutant input, correlation analysis showed that chromium, nickel, zinc, cadmium, lead, arsenic, and mercury in the sediments of the middle and west channels as well as the sea area of the western Yalu River Estuary concentrations were most probably derived from similar sources. In contrast, the metal of copper most probably originated from sources different from the other metals. Preliminary studies indicate that copper contamination was most likely the result of emission from mining activities situated at the upstream of the river. The contents of heavy metals in the sediments of estuarine turbidity maximum zone of Yalu River were larger than those of any other areas in the middle channel. With large portion of fine sediments, weaker hydrodynamics, and richer sources of heavy metals, the sediments of the west channel, were even more enriched with heavy metals than those of the middle channel.

Propagação vegetativa por enxertia em meliáceas.

2008

Avaliação de combinações enxerto/porta-enxerto visando indução de resistência à broca das meliáceas por enxertia.

Este trabalho teve por objetivos avaliar combinações enxerto/porta-enxerto e modalidades de enxertia no sentido de indução de resistência em algumas espécies de meliáceas à broca causada pela Hypsipyla grandella. Foram testadas modalidades de enxertia e combinações intraespecíficas, intra e intergenéricas e interfamílias. A combinação toona/mogno, métodos GFMT e GFCT obtiveram, respectivamente o segundo e o terceiro pegamento médio, diferindo estatisticamente das demais. As combinações mogno/ toona e toona/mogno apresentaram bons resultados de pegamento na enxertia. Entretanto, as plantas definharam e acabaram morrendo, restando vivas as combinações mogno/mogno (testemunha). O melhor pegamento foi obtido na combinação cedro branco/cinamomo, diferindo significativamente das demais. A combinação cedro branco/toona apresentou o segundo melhor pegamento, diferindo significativamente das demais. As combinações MBr/Af ? GFMT, MAf/MBR ? GFMT e MBr/Af ? Borbulhia em T invertido apresentaram o terceiro melhor pegamento. O comportamento das melhores combinações foi avaliado em condições de campo. Os resultados mostraram incompatibilidade enxerto/porta-enxerto na fase de enxertia para todas as combinações testadas, à exceção das combinações mogno/mogno africano, mogno/mogno (testemunha) e cedro branco/cedro australiano. Em condições de campo, a combinação mogno/ mogno africano foi atacada pela H. grandella (apresentou sintomas de danos da broca).

Levantamento de reconhecimento dos solos do Estado do Paraná.

O conhecimento pormenorizado das propriedades morfológicas, físicas, químicas e mineralógicas dos solos, constitui fonte de informação básica para a compreensão e solução dos problemas que afetam a pesquisa agropecuária.

Solos do Estado de Santa Catarina.

2004

An analysis of manufacturing simulation software.

As a management tool Similation Software deserves greater analysis from both an academic and industrial viewpoint. A comparative study of three packages was carried out from a 'first time' use approach. This allowed the ease of use and package features to be assessed using a simple theoretical benchmark manufacturing process. To back the use of these packages an objective survey on simulation use and package features was carried out within the manufacturing industry.This identified the use of simulation software, its' applicability and preception of user requirements thereby proposing an ideal package.

Benchmarking the business and operations strategy link.

This paper reports on the use of benchmarking to improve the links between business and operations strategies. The use of benchmarking as a tool to facilitate improvement in these crucial links is examined. The existing literature on process benchmarking is used to form a structured questionnaire to apply to six case studies of major maunfacturing companies. Four of these case studies are presented drawing upon the critical success factors identified both in the literature and on the case results. Recommendations for further work are outlined.

Analyses of patterns of copper and lead mineralisation in human skeletons excavated from an ancient mining and smelting centre in the Jordanian desert

Grattan, J.P., Al-Saad, Z., Gilbertson, D.D., Karaki, L.O., Pyatt, F.B 2005 Analyses of patterns of copper and lead mineralisation in human skeletons excavated from an ancient mining and smelting centre in the Jordanian desert Mineralogical Magazine. 69(5) 653-666.

'Death...more desirable than life'? The human skeletal record and toxicological implications of ancient copper mining and smelting in Wadi Faynan, southwestern Jordan

Grattan, J., Huxley, S., Karaki, L. A., Toland, H., Gilbertson, D., Pyatt, B., Saad, Z. A. (2002). 'Death . . . more desirable than life'? The human skeletal record and toxicological implications of ancient copper mining and smelting in Wadi Faynan, southwestern Jordan. Toxicology and Industrial Health, 18 (6), 297-307.