Differential fruit consumption of two Melastomataceae by birds in Serra da Mantiqueira, southeastern Brazil

In this study we report on the consumption of two syntopic Melastomataceae species by birds in a lower montane forest in Monte Verde, southeastern Brazil. The species of frugivores were identified and characterized by their methods of capture and consumption of fruits. We also provide information on abundance, phenology of plants and fruit characteristics of the two Melastomataceae species. The 13 observed species of birds formed two statistically distinct frugivorous groups with taxonomic and behavioral differences. Five of seven bird species that fed on L. aff. sublanata fruits belong to the subfamily Thraupinae and most fruits were mashed before swallowed. Four of the eight bird species that visited M. cinerascens belong to the subfamily Turdinae and all fruits were swallowed whole. Only two bird species were common visitors of both Melastomataceae species. Our findings show that fruits of the two Melastomataceae species with similar morphological characteristics were exploited differently by frugivorours birds.

Evaluation of systems for timing of fungicide sprays for control of postbloom fruit drop of citrus in Brazil

Postbloom fruit drop (PFD) of citrus, caused by Colletotrichum acutatum, infects petals of citrus flowers and produces orange-brown lesions that induce the abscission of young fruitlets and the retention of calyces. Proper timing of fungicide applications is essential for good disease control. Different systems for timing of fungicide applications for control of PFD in a major citrus-growing region in southern São Paulo state in Brazil were evaluated from 1999 to 2002. The following programs were compared to an unsprayed control using counts of diseased flowers, persistent calyces, or fruit: (i) a phenology-based program currently recommended in Brazil with one application at early and another at peak bloom; (ii) the Florida PFD model; (iii) the postbloom fruit drop-fungicide application decision system (PFD-FAD), a new computer-assisted decision method; and (iv) grower's choice. In 1999, no disease developed, sprays applied with the phenology-based program had no effect, and the Florida PFD model saved two sprays compared with the phenology-based program. In 2000, PFD was moderate and the phenology-based and growers' choice treatments had a significantly lower number of persistent calyces and higher fruit numbers than the control, but no differences were found between those treatments and the PFD model. In 2001, PFD was severe with considerable yield loss. The PFD model, the phenology-based program, and the grower's choice reduced flower blight and the number of persistent calyces, and improved fruit yields with two to three applications, but the PFD-FAD achieved comparable yields with only one spray. In 2002, the disease was mild, with no yield loss, and the Florida PFD model and the PFD-FAD saved one spray compared with the other systems. The PFD model and the PFD-FAD were equally effective for timing fungicide applications to control PFD in Brazil. Scouting of trees is simpler with PFD-FAD; therefore, this system is recommended and should eliminate unnecessary sprays and reduce costs for growers.

The influence of fruit morphology and habitat structure on ant-seed interactions: A study with artificial fruits

Artificial fruits designed to simulate lipid-rich non-myrecochorous diaspores were used to test for the effect of fruit morphology and habitat structure on ant-seed interactions in an Atlantic Forest site in SE Brazil. The outcome of the interaction (i.e., if the fruit was removed, cleaned by ants on the spot or had no interaction with ants) and the time of ant response were the investigated variables. Models simulating drupes and arilate diaspores were used to test for morphological effects and four habitat attributes (litter depth, number of logs, number of trees, and percentage of bromeliad coverage on the forest floor), likely to be correlated with the ant diversity and abundance in the study site, were measured to test for the effect of habitat structure. The proportion of fruits removed or cleaned did not differ between the two morphological models. Sites in which fruits were cleaned had more trees than those in which no interaction occurred. This may be a result of the foraging behavior of arboreal ants that frequently descend to the forest floor to exploit fleshy diaspores. Sites in which model removal occurred had lower litter depth than both those in which models were cleaned and those in which no interaction occurred. A negative correlation was observed between litter depth and ant response time. Accumulation of leaf litter at a given point may have constrained the movements of large ants in general, and ponerine ants (that are important seed removers) in particular. We conclude that that local pattern in litter depth and tree density influence the frequency and outcome of interactions between ants and non-myrmecochorous, fleshy diaspores.

Thermal properties of passion fruit juice as affected by temperature and water content

The specific heat, thermal conductivity and density of passion fruit juice were experimentally determined from 0.506 to 0.902 (wet basis) water content and temperatures from 0.4 to 68.8C. The experimental results were compared with existing and widely used models for the thermal properties. In addition, based on empiric equations from literature, new simple models were parameterized with a subset of the total experimental data. The specific heat and thermal conductivity showed linear dependency on water content and temperature, while the density was nonlinearly related to water content. The generalized predictive models were considerably good for this product but the empiric, product-specific models developed in the present work yield better predictions. Even though the existing models showed a moderate accuracy, the new simple ones would be preferred, because they constitute an easier and direct way of evaluating the thermal properties of passion fruit juice, requiring no information about the chemical composition of the product, and a reduced time of the estimation procedure, as the new empiric models are described in terms of only two physical parameters, the water content and the temperature. © Copyright 2005, Blackwell Publishing All Rights Reserved.

Influence of natural fruit juices in removing the smear layer from root surfaces - An in vitro study

Certain elements of a patient's diet may be associated with dentin hypersensitivity. The intent of this study was to evaluate the degree of removal of the smear layer from dentin surfaces by various fruit juices. A smear layer was created on extracted human teeth by manual scaling. The roots were reduced and distributed into 8 experimental groups. Distilled water was the negative control. The juices were applied by 2 methods: topical application and topical application with friction. Specimens were photomicrographed and graded according to an index of smear layer removal. With topical application, all but 2 of the tested substances resulted in significantly greater removal of the smear layer and opening of dentinal tubules than was the case with the negative control (p = 0.05); the exceptions were Gala apple and Italian grape juices, which were no different from the control. For the active application (with friction), most substances removed more smear layer than the control (p < 0.05); Gala apple, Italian grape and orange juices were similar to the control. For each of the tested substances, removal of the smear layer did not differ with the method of application (topical vs. friction; p > 0.05). It is concluded that natural fruit juices can remove the smear layer from dentin surfaces, and the efficacy of this removal varies with the type of juice. © J Can Dent Assoc 2004.

Development of a supercritical fluid extraction method for simultaneous determination of organophosphorus, organohalogen, organonitrogen and pyretroids pesticides in fruit and vegetables and its comparison with a conventional method by GC-ECD and GC-MS

The aim of this paper was to apply a multiresidue method using Supercritical Fluid Extraction (SFE) and capillary gas chromatography with electron capture and mass spectrometry detections in the analysis of the levels of pesticide residues in fruits and vegetables. Single laboratory validation of both solid-liquid and supercritical fluid extraction methods was carried out for 32 compounds selected from four pesticide classes (organochlorine, organonitrogen, organophosphorus and pyretroid) in blank and fortified samples of fresh lettuce, potato, apple and tomato. Recoveries for the majority of pesticides from fortified samples at fortification level of 0.04-0.10 mg kg -1 ranged 74-96% for both methods and confirmation of pesticide identity was performed by gas-chromatography-mass spectrometry in a selected-ion monitoring mode. Both methods showed good limits of detection (less 0.01 mg kg-1, depending on the pesticide and matrix) and the SFE method minimized environmental concerns, time, and laboratory work. ©2005 Sociedade Brasileira de Química.

Use of carambola (Averrhoa carambola L. 'Fwang Tung') fruit at two stages of maturity for fresh-cut products

Carambola fruit ('Fwang Tung') were picked at two stages of maturity: mature-green (50% yellow) and mature (100% yellow). Fruit were washed with water, dipped in NaOCl solution (200 mg.L-1 for 5 minutes), and stored over night at 10°C. Fruit were sliced manually in to pieces of approximately 1 cm thickness. Slices were rinsed with NaOCl solution at 20 mg.L-1, drained for 3 minutes, and packaged in polyethylene tereftalate (PET) trays provided with a fit cover (Neoform® N94). Packages were stored at 6.5°C and 85% RH for 9 days, and samples taken every 3 days for physical, chemical and biochemical analysis, respiration, and internal atmosphere composition. Immediately after cutting, slices at both stages of maturity showed a wounding response with a 5-fold increase in respiration rate. Polygalacturonase (PG) and polyphenol oxidase (PPO) activity did not differ between stages of maturity. Despite the less mature stage being less preferred at the sensory evaluation owing to its greenish peel, the best stage of maturity for carambola fresh-cut production was mature-green, due to a higher resistance to cutting, and presenting a better colour and appearance maintenance for up to 9 days.

Initial concentration profile influence on migration measurements from plastic packaging: A simulation study

Migration of components from plastic packaging into foodstuffs or into medicines is a very important issue, concerning public health. Using experimental techniques, like gas chromatography-mass spectrometry, these essays measure total migration and specific migration of components from plastic packaging. This work presents an explanation and applications of a numerical technique tool for this measurement, allowing the comprehension of the diffusion process and the estimate of component migration in difficult or impractical measurements. As an application example, the non-uniform influence of initial concentration profile on the migration is presented, demonstrating the necessity of this profile determination for high quality considerations on involved metrology.

Freezing point and thermal conductivity of tropical fruit pulps: Mango and papaya

The freezing point depression of mango and papaya pulps was measured by using a simple apparatus, consisting of two major sections: a freezing vessel and a data acquisition system. The thermal conductivity of both pulps as a function of frozen water fraction and temperature was also investigated by using a coaxial dual-cylinder apparatus. Thermal conductivity above the initial freezing point was well fitted by polynomial equations. Below the freezing point, the thermal conductivity was strongly affected by both the frozen water fraction and temperature. Simple equations in terms of frozen water fraction and temperature could be fitted to the experimental data of freezing point depression and thermal conductivity.

A unique intraorbital osseous structure in the large fruit-eating bat (Artibeus lituratus)

Objective: To describe the normal bony orbital structure of the large fruit-eating bat (Artibeus lituratus) with emphasis on a unique intraorbital bony structure previously not described in the literature. Procedures: The bony anatomy of the orbital cavity was studied on dissected skulls of large fruit-eating bats. The anatomic description of a unique intraorbital spine was made while studying the bony orbit of macerated skulls. Additional observations were made on dissected formalin-fixed whole heads. Both procedures were performed under a stereo dissecting microscope, using ×2-4-magnification. A histologic analysis of soft tissues surrounding this cylindrical bony structure was performed using cross and longitudinal oblique sections from decalcified whole heads, which had been fixed in formalin. Additionally, biometric measurements and a histomorphometric analysis were performed. Results and conclusions: An intraorbital cylindrical osseous structure measuring 3.96 ± 0.68 mm in length and 155.62 ± 14.03 μm in diameter was observed in the large fruit-eating bat (A. lituratus), creating a unique orbital structural design among mammals. We suggest the name optic spine of the alisphenoid bone. The anatomic, biometric and histologic characterization of this element might contribute to a further understanding of the dynamics of bat vision and the sort of factors that influenced evolution of the visual system of microbats. The authors hope that the documentation of this distinctive anatomic feature will also expand the debate about the phylogenetic analysis of the relationship among bat species in the near future. © 2007 American College of Veterinary Ophthalmologists.

QTL identification for tolerance to fruit set in tomato by FAFLP markers

This study aimed to detect quantitative trait loci (QTL) by fALP (Fluorescent Amplified Fragment Length Polymorphism) markers associated to the trait tomato fruit set at high temperatures. A biparental cross between line Jab-95 (heat-tolerant) and cultivar Caribe (heat-susceptible) was made. A total of 192 plants of the F2 generation were evaluated, generating 172 polymorphic markers through six primer combinations previously identified by the Bulked Segregant Analysis technique. To construct the genetic map, 106 of the 172 markers that segregated in the expected Mendelian segregation proportion (3:1) were used. The map covered 1191.46 cM of the genome. Six trait-linked QTL were identified in the analysis of simple markers and three others by the interval-mapping methodology. These results could be highly useful in improvement programs, since heat-tolerant plants can be selected rapidly, which improves tomato fruit set.

The use of the carbon-13 in the partitioning of photosynthate in vegetative and reproductive twigs of 'Sweet' passion fruit

This study's objective is to evaluate the photosynthates partitioning and source-sink relationships, in vegetative and reproductive twigs of sweet passion fruit, using the carbon-13, stable isotope of carbon. The leaves of vegetative and reproductive twigs were placed in a sealed chamber and 13CO 2 were injected for 30 minutes. After six hours, the different organs of the twig were collected and immersed in liquid nitrogen (-196°C). All plant samples were oven-dried, powdered and combusted in an elemental analyzer. The results showed that the methodology was efficient to evaluate the partitioning of photosynthates. In the vegetative twigs, the new open leaves, the closed leaves and growth meristem were the principal sink for the source leaves enriched with 13CO 2. In the reproductive twigs with only flowers buds, the source-sink relationship was changed and the flowers buds turn to be the principal sink and the growing leaves were secondary sinks. The presence of young fruits changed again the source-sink relationship of the twig, and they were the principal sinks. The apical leaves, with 60% of final leaf area were also a sink for photosynthates.

Leaf spray fertilization of boron and zinc on productivity and fruit quality of Japanese pear tree

The cultivation of fruit plants from temperate climate in tropical or subtropical regions can be a good income alternative for the producer. However, due to the little existent information about cultivation of those fruit plants, the producers use imported techniques of other producing areas, or even an association of practices used for other fruit plants, pointing out the leaf spray fertilization of micronutrients without appropriate scientific base. In this context, the objective of this study was to verify the effect of the leaf spray fertilization of B and Zn on productivity and fruit quality of Japanese pear tree. The experiment was conducted from 2004 to 2005, in Ilha Solteira, in northwestern São Paulo State-Brazil. The climate is, according to the Köpppen Classification, tropical wet and dry (Aw). The 'Okusankichi' cultivar, grafted on Pyrus communis L. rootstock was used as well as doses of 110 g.ha-1 of B and 250 g.ha-1 of Zn in each application. The treatments were: T1. water, T2. boric acid, T3. zinc sulfate, T4. T2 + T3, T5. boric acid + urea + citric acid + EDTA, T6. zinc sulfate + urea + citric acid + EDTA, T7. T5 + T6, T8. boric acid + urea + citric acid + EDTA + sodium molibdate + sulfur + calcium chloride, T9. zinc sulfate + urea + citric acid + EDTA + Fe sulfate + Mn sulfate + Mg sulfate and, T10. T8+T9. A randomized blocks design was used and the averages were compared by Tukey test. In the first crop the mixture of boric acid with quelating agents were efficient to supply B to the plants and zinc sulfate plus quelating agents were efficient to increase Zn leaf content. However, the productivity and the fruit quality were not influenced by the leaf spray of B and Zn. In the second crop the leaf content of B and Zn and the productivity were not influenced by the leaf spray; the boric acid and the zinc sulfate with or without quelating agents increased the contents of total soluble solids and, the boric acid with or without quelating agents increased the contents of total titratable acidity.

Morphological alterations on human radicular dentin after exposure to different fruit juice drinks

Purpose: This in vitro study aimed to evaluate the effect of different fruit juice drinks available in the Brazilian market on smear layer removal and dentinal tubules opening, as well as to verify the effect of toothbrushing subsequently to the juices exposure. Methods: Dentin specimens were prepared and randomly distributed into the control group (distilled water) and twelve types of fruit juice drinks (cashew, orange, mandarin, apple, passion fruit, guava, strawberry, grape, mango, pear, peach, pineapple). The following treatments were applied: immersion or immersion + brushing. After preparation for SEM, photomicrographs were assessed using an index of smear layer removal. Results: No significant differences regarding smear layer removal and dentinal tubules exposure could be observed between the groups after both treatments (Kruskal-Wallis, post-hoc paired comparisons, P>0.05). The control solution and the fruit juice drinks were not able to remove smear layer and to open dentinal tubules. Significant difference between the applied treatments was detected only for the mango juice group (Mann-Whitney, P<0.05). Conclusion: Under the experimental conditions, the different fruit juice drinks did not promote significant alterations on human radicular dentin morphology regardless of the subsequent application of brushing procedures. Copyright: © 2011 Zandim et al.

Development of starch biobased and biodegradable plastics for their use in trays for food-packaging

This research work develops new methods to produce biodegradable starch-based trays for the purpose of replacing expanded polystyrene in the food packaging market. The starch based biopolymers present several drawbacks like poor mechanical properties and very high density. In order to overcome these drawbacks two research lines have been set up: blending thermoplastic starch with biobased reinforcements from agricultural wastes like barley straw and grape wastes, and testing the foamability of these materials with a Microwave-foaming method.