Large scale experiments on gravel and mixed beaches: Experimental procedure, data documentation and initial results

This paper provides information on the experimental set-up, data collection methods and results to date for the project Large scale modelling of coarse grained beaches, undertaken at the Large Wave Channel (GWK) of FZK in Hannover by an international group of researchers in Spring 2002. The main objective of the experiments was to provide full scale measurements of cross-shore processes on gravel and mixed beaches for the verification and further development of cross-shore numerical models of gravel and mixed sediment beaches. Identical random and regular wave tests were undertaken for a gravel beach and a mixed sand/gravel beach set up in the flume. Measurements included profile development, water surface elevation along the flume, internal pressures in the swash zone, piezometric head levels within the beach, run-up, flow velocities in the surf-zone and sediment size distributions. The purpose of the paper is to present to the scientific community the experimental procedure, a summary of the data collected, some initial results, as well as a brief outline of the on-going research being carried out with the data by different research groups. The experimental data is available to all the scientific community following submission of a statement of objectives, specification of data requirements and an agreement to abide with the GWK and EU protocols. (C) 2005 Elsevier B.V. All rights reserved.

Experimental validation of the regulated expression of large numbers of non-coding RNAs from the mouse genome

Recent large-scale analyses of mainly full-length cDNA libraries generated from a variety of mouse tissues indicated that almost half of all representative cloned sequences did flat contain ail apparent protein-coding sequence, and were putatively derived from non-protein-coding RNA (ncRNA) genes. However, many of these clones were singletons and the majority were unspliced, raising the possibility that they may be derived from genomic DNA or unprocessed pre-rnRNA contamination during library construction, or alternatively represent nonspecific transcriptional noise. Here we Show, using reverse transcriptase-dependent PCR, microarray, and Northern blot analyses, that many of these clones were derived from genuine transcripts Of unknown function whose expression appears to be regulated. The ncRNA transcripts have larger exons and fewer introns than protein-coding transcripts. Analysis of the genomic landscape around these sequences indicates that some cDNA clones were produced not from terminal poly(A) tracts but internal priming sites within longer transcripts, only a minority of which is encompassed by known genes. A significant proportion of these transcripts exhibit tissue-specific expression patterns, as well as dynamic changes in their expression in macrophages following lipopolysaccharide Stimulation. Taken together, the data provide strong support for the conclusion that ncRNAs are an important, regulated component of the mammalian transcriptome.

Influence of lattice interactions on the jahn-teller distortion of the [Cu(H2O)(6)](2+) ion: Dependence of the crystal structure of K-2[Cu(H2O)(6)](SO4)(2x)(SeO4)(2-2x) upon the sulfate/selenate ratio

The temperature dependence of the structure of the mixed-anion Tutton salt K-2[Cu(H2O)(6)](SO4)(2x)(SeO4)(2-2x) has been determined for crystals with 0, 17, 25, 68, 78, and 100% sulfate over the temperature range of 85-320 K. In every case, the [Cu(H2O)(6)](2+) ion adopts a tetragonally elongated coordination geometry with an orthorhombic distortion. However, for the compounds with 0, 17, and 25% sulfate, the long and intermediate bonds occur on a different pair of water molecules from those with 68, 78, and 100% sulfate. A thermal equilibrium between the two forms is observed for each crystal, with this developing more readily as the proportions of the two counterions become more similar. Attempts to prepare a crystal with approximately equal amounts of sulfate and selenate were unsuccessful. The temperature dependence of the bond lengths has been analyzed using a model in which the Jahn-Teller potential surface of the [Cu(H2O)(6)](2+) ion is perturbed by a lattice-strain interaction. The magnitude and sign of the orthorhombic component of this strain interaction depends on the proportion of sulfate to selenate. Significant deviations from Boltzmann statistics are observed for those crystals exhibiting a large temperature dependence of the average bond lengths, and this may be explained by cooperative interactions between neighboring complexes.

Significant patterns of population genetic structure and limited gene flow in a threatened macropodid marsupial despite continuous habitat in southeast Queensland, Australia

Many endangered species worldwide are found in remnant populations, often within fragmented landscapes. However, when possible, an understanding of the natural extent of population structure and dispersal behaviour of threatened species would assist in their conservation and management. The brush-tailed rock-wallaby (Petrogale penicillata), a once abundant and widespread rock-wallaby species across southeastern Australia, has become nearly extinct across much of the southern part of its range. However, the northern part of the species' range still sustains many small colonies closely distributed across suitable habitat, providing a rare opportunity to investigate the natural population dynamics of a listed threatened species. We used 12 microsatellite markers to investigate genetic diversity, population structure and gene flow among brush-tailed rock-wallaby colonies within and among two valley regions with continuous habitat in southeast Queensland. We documented high and signifcant levels of population genetic structure between rock-wallaby colonies embedded in continuous escarpment habitat and forest. We found a strong and significant pattern of isolation-by-distance among colonies indicating restricted gene flow over a small geographic scale (< 10 km) and conclude that gene flow is more likely limited by intrinsic factors rather than environmental factors. In addition, we provide evidence that genetic diversity was significantly lower in colonies located in a more isolated valley region compared to colonies located in a valley region surrounded by continuous habitat. These findings shed light on the processes that have resulted in the endangered status of rock-wallaby species in Australia and they have strong implications for the conservation and management of both the remaining 'connected' brush-tailed rock-wallaby colonies in the northern parts of the species' range and the remnant endangered populations in the south.

Simulations of pendant drop formation of a viscoelastic liquid

A modified Volume-of-Fluid (VOF) numerical method is used to predict the dynamics of a liquid drop of a low viscosity dilute polymer solution, forming in air from a circular nozzle. Viscoelastic effects are represented using an Oldroyd-B model. Predicted drop shapes are compared with experimental observations. The main features, including the timing of the shape evolution and the bead-on-a-string effect, are well reproduced by the simulations. The results confirm published conclusions of the third author, that the deformation is effectively Newtonian until near the time of Newtonian pinch-off and that the elastic stress becomes large in the pinch region due to the higher extensional flow there.

Specialization of pyramidal cell structure in the visual areas V1, V2 and V3 of the South American rodent, Dasyprocta primnolopha

Marked phenotypic variation has been reported in pyramidal cells in the primate cerebral cortex. These extent and systematic nature of these specializations suggest that they are important for specialized aspects of cortical processing. However, it remains unknown as to whether regional variations in the pyramidal cell phenotype are unique to primates or if they are widespread amongst mammalian species. In the present study we determined the receptive fields of neurons in striate and extrastriate visual cortex, and quantified pyramidal cell structure in these cortical regions, in the diurnal, large-brained, South American rodent Dasyprocta primnolopha. We found evidence for a first, second and third visual area (V1, V2 and V3, respectively) forming a lateral progression from the occipital pole to the temporal pole. Pyramidal cell structure became increasingly more complex through these areas, suggesting that regional specialization in pyramidal cell phenotype is not restricted to primates. However, cells in V1, V2 and V3 of the agouti were considerably more spinous than their counterparts in primates, suggesting different evolutionary and developmental influences may act on cortical microcircuitry in rodents and primates. (c) 2006 Elsevier B.V. All rights reserved.

A study of large-bowel volvulus in urban Australia

Background: Large-bowel volvulus is a rare cause of bowel obstruction in the industrialized world. We analyzed the presentation and outcome of 49 patients at the Princess Alexandra Hospital, Brisbane, Australia, who received a diagnosis of colonic volvulus from 1991 to 2001. Methods: A retrospective chart study was carried out. Results: Twenty-nine patients had sigmoid volvulus (59%), 19 patients had cecal volvulus (39%) and 1 patient had a transverse colon volvulus (2%). The diagnosis of sigmoid volvulus was made accurately on plain abdominal radiography or contrast enema in 90% of cases (n = 26), compared with only 42% of cases (n = 8) of cecal volvulus. Twenty-two patients with sigmoid volvulus were treated initially with endoscopic decompression. The success rate was 64% (n = 14). There was a high early recurrence rate of sigmoid volvulus for those treated by endoscopic decompression alone (43%) during a mean period of 32 days. Of the 14 patients with cecal volvulus who were treated with right hemicolectomy, 12 had primary anastomosis and 2 had end ileostomy with mucous fistula formation. There was no anastomotic leak following right hemicolectomy with primary anastomosis, even though 6 of these patients had an ischemic cecum. Conclusions: Endoscopic decompression of the sigmoid volvulus was safe and effective as an initial treatment but has a high early recurrence rate. Any patient who is fit enough to undergo operation should have a definitive procedure during the same admission to avoid recurrence. Cecal volvulus is associated with a higher incidence of gangrene and is treated effectively by right hemicolectomy with or without anastomosis. The need for swift operative intervention is emphasized.

Synthesis and structure characterization of chromium oxide prepared by solid thermal decomposition reaction

Mesoporous chromium oxide (Cr2O3) nanocrystals were first synthesized by the thermal decomposition reaction of Cr(NO3)(3)(circle)9H(2)O using citric acid monohydrate (CA) as the mesoporous template agent. The texture and chemistry of chromium oxide nanocrystals were characterized by N-2 adsorption-desorption isotherms, FTIR, X-ray diffraction (XRD), UV-vis, and thermoanalytical methods. It was shown that the hydrate water and CA are the crucial factors in influencing the formation of mesoporous Cr2O3 nanocrystals in the mixture system. The decomposition of CA results in the formation of a mesoporous structure with wormlike pores. The hydrate water of the mixture provides surface hydroxyls that act as binders, making the nanocrystals aggregate. The pore structures and phases of chromium oxide are affected by the ratio of precursor-to-CA, thermal temperature, and time.

Maternal health during pregnancy and perinatal mortality in Bangladesh: evidence form a large-scale community-based clinical trial

Perinatal mortality is very high in Bangladesh. In this setting, few community-level studies have assessed the influence of underlying maternal health factors on perinatal outcomes. We used the data from a community-based clinical controlled trial conducted between 1994 and 1997 in the catchment areas of a large MCH/FP hospital located in Mirpur, a suburban area of Dhaka in Bangladesh, to investigate the levels of perinatal mortality and its associated maternal health factors during pregnancy. A total of 2007 women were followed after recruitment up to delivery, maternal death, or until they dropped out of the study. Of these, 1584 who gave birth formed our study subjects. The stillbirth rate was 39.1 per 1000 births [95% confidence interval (CI) 39.0, 39.3] and the perinatal mortality rate (up to 3 days) was 54.3 per 1000 births [95% CI 54.0, 54.6] among the study population. In the fully adjusted logistic regression model, the risk of perinatal mortality was as high as 2.7 times [95% CI 1.5, 4.9] more likely for women with hypertensive disorders, 5.0 times [95% CI 2.3, 10.8] as high for women who had antepartum haemorrhage and 2.6 times [95% CI 1.2, 5.8] as high for women who had higher haemoglobin levels in pregnancy when compared with their counterparts. The inclusion of potential confounding variables such as poor obstetric history, sociodemographic characteristics and preterm delivery influenced only marginally the net effect of important maternal health factors associated with perinatal mortality. Perinatal mortality in the study setting was significantly associated with poor maternal health conditions during pregnancy. The results of this study point towards the urgent need for monitoring complications in high-risk pregnancies, calling for the specific components of the safe motherhood programme interventions that are designed to manage these complications of pregnancy.

A framework of issues in large process modeling projects

As process management projects have increased in size due to globalised and company-wide initiatives, a corresponding growth in the size of process modeling projects can be observed. Despite advances in languages, tools and methodologies, several aspects of these projects have been largely ignored by the academic community. This paper makes a first contribution to a potential research agenda in this field by defining the characteristics of large-scale process modeling projects and proposing a framework of related issues. These issues are derived from a semi -structured interview and six focus groups conducted in Australia, Germany and the USA with enterprise and modeling software vendors and customers. The focus groups confirm the existence of unresolved problems in business process modeling projects. The outcomes provide a research agenda which directs researchers into further studies in global process management, process model decomposition and the overall governance of process modeling projects. It is expected that this research agenda will provide guidance to researchers and practitioners by focusing on areas of high theoretical and practical relevance.

Asymptotic theory of time varying networks with memory and heterogeneous activation pattern

In this thesis work we develop a new generative model of social networks belonging to the family of Time Varying Networks. The importance of correctly modelling the mechanisms shaping the growth of a network and the dynamics of the edges activation and inactivation are of central importance in network science. Indeed, by means of generative models that mimic the real-world dynamics of contacts in social networks it is possible to forecast the outcome of an epidemic process, optimize the immunization campaign or optimally spread an information among individuals. This task can now be tackled taking advantage of the recent availability of large-scale, high-quality and time-resolved datasets. This wealth of digital data has allowed to deepen our understanding of the structure and properties of many real-world networks. Moreover, the empirical evidence of a temporal dimension in networks prompted the switch of paradigm from a static representation of graphs to a time varying one. In this work we exploit the Activity-Driven paradigm (a modeling tool belonging to the family of Time-Varying-Networks) to develop a general dynamical model that encodes fundamental mechanism shaping the social networks' topology and its temporal structure: social capital allocation and burstiness. The former accounts for the fact that individuals does not randomly invest their time and social interactions but they rather allocate it toward already known nodes of the network. The latter accounts for the heavy-tailed distributions of the inter-event time in social networks. We then empirically measure the properties of these two mechanisms from seven real-world datasets and develop a data-driven model, analytically solving it. We then check the results against numerical simulations and test our predictions with real-world datasets, finding a good agreement between the two. Moreover, we find and characterize a non-trivial interplay between burstiness and social capital allocation in the parameters phase space. Finally, we present a novel approach to the development of a complete generative model of Time-Varying-Networks. This model is inspired by the Kaufman's adjacent possible theory and is based on a generalized version of the Polya's urn. Remarkably, most of the complex and heterogeneous feature of real-world social networks are naturally reproduced by this dynamical model, together with many high-order topological properties (clustering coefficient, community structure etc.).

The growing importance of inter-company collaboration

Guest editorial: This special issue has been drawn from papers that were published as part of the Second European Conference on Management of Technology (EuroMOT) which was held at Aston Business School (Birmingham, UK) 10-12 September 2006. This was the official European conference for the International Association for Management of Technology (IAMOT); the overall theme of the conference was “Technology and global integration.” There were many high-calibre papers submitted to the conference and published in the associated proceedings (Bennett et al., 2006). The streams of interest that emerged from these submissions were the importance of: technology strategy, innovation, process technologies, managing change, national policies and systems, research and development, supply chain technology, service and operational technology, education and training, small company incubation, technology transfer, virtual operations, technology in developing countries, partnership and alliance, and financing and investment. This special issue focuses upon the streams of interest that accentuate the importance of collaboration between different organisations. Such organisations vary greatly in character; for instance, they may be large or small, publicly or privately owned, and operate in manufacturing or service sectors. Despite these varying characteristics they all have something in common; they all stress the importance of inter-organisational collaboration as a critical success factor for their organisation. In today's global economy it is essential that organisations decide what their core competencies are what those of complementing organisations are. Core competences should be developed to become a bases of differentiation, leverage and competitive advantage, whilst those that are less mature should be outsourced to other organisations that can claim to have had more recognition and success in that particular core competence (Porter, 2001). This strategic trend can be observed throughout advanced economies and is growing strongly. If a posteriori reasoning is applied here it follows that organisations could continue to become more specialised in fewer areas whilst simultaneously becoming more dependent upon other organisations for critical parts of their operations. Such actions seem to fly in the face of rational business strategy and so the question must be asked: why are organisations developing this way? The answer could lie in the recent changes in endogenous and exogenous factors of the organisation; the former emphasising resource-based issues in the short-term, and strategic positioning in the long-term whilst the later emphasises transaction costs in the short-term and acquisition of new skills and knowledge in the long-term. For a harmonious balance of these forces to prevail requires organisations to firstly declare a shared meta-strategy, then to put some cross-organisational processes into place which have their routine operations automated as far as possible. A rolling business plan would review, assess and reposition each organisation within this meta-strategy according to how well they have contributed (Binder and Clegg, 2006). The important common issue here is that an increasing number of businesses today are gaining direct benefit from increasing their levels of inter-organisational collaboration. Such collaboration has largely been possible due to recent technological advances which can make organisational structures more agile (e.g. the extended or the virtual enterprise), organisational infra-structure more connected, and the sharing of real-time information an operational reality. This special issue consists of research papers that have explored the above phenomenon in some way. For instance, the role of government intervention, the use of internet-based technologies, the role of research and development organisations, the changing relationships between start-ups and established firms, the importance of cross-company communities of practice, the practice of networking, the front-loading of large-scale projects, innovation and the probabilistic uncertainties that organisations experience are explored in these papers. The cases cited in these papers are limited as they have a Eurocentric focus. However, it is hoped that readers of this special issue will gain a valuable insight into the increasing importance of collaborative practices via these studies.

Damage analysis of bridge structures using vibrational techniques

Much research is currently centred on the detection of damage in structures using vibrational data. The work presented here examined several areas of interest in support of a practical technique for identifying and locating damage within bridge structures using apparent changes in their vibrational response to known excitation. The proposed goals of such a technique included the need for the measurement system to be operated on site by a minimum number of staff and that the procedure should be as non-invasive to the bridge traffic-flow as possible. Initially the research investigated changes in the vibrational bending characteristics of two series of large-scale model bridge-beams in the laboratory and these included ordinary-reinforced and post-tensioned, prestressed designs. Each beam was progressively damaged at predetermined positions and its vibrational response to impact excitation was analysed. For the load-regime utilised the results suggested that the infuced damage manifested itself as a function of the span of a beam rather than a localised area. A power-law relating apparent damage with the applied loading and prestress levels was then proposed, together with a qualitative vibrational measure of structural damage. In parallel with the laboratory experiments a series of tests were undertaken at the sites of a number of highway bridges. The bridges selected had differing types of construction and geometric design including composite-concrete, concrete slab-and-beam, concrete-slab with supporting steel-troughing constructions together with regular-rectangular, skewed and heavily-skewed geometries. Initial investigations were made of the feasibility and reliability of various methods of structure excitation including traffic and impulse methods. It was found that localised impact using a sledge-hammer was ideal for the purposes of this work and that a cartridge `bolt-gun' could be used in some specific cases.