Obtenção de sistemas multiparticulados de isoniazida revestidos com polímero de liberação entérica

Known for thousands of years, tuberculosis (TB) is the leading cause of mortality by a single infectious disease due to lack of patient adherence to available treatment regimens, the rising of multidrug resistant strains of TB (MDR-TB) and co-infection with HIV virus. Isoniazid and rifampicin are the most powerful bactericidal agents against M. tuberculosis. Because of that, this couple of drugs becomes unanimity in anti-TB treatment around the world. However, the rifampicin in acidic conditions in the stomach can be degraded rapidly, especially in the presence of isoniazid, which reduces the amount of available drug for absorption, as well as its bioavailability, contributing to the growing resistance to tuberculostatic drugs. Rifampicin is well absorbed in the stomach because of its high solubility between pH 1 and 2 and the gastric absorption of isoniazid is considered poor, therefore it is mostly intestinal. This work has as objective the development of gastro-resistant multiple-systems (granules and pellets) of isoniazid aiming to prevent the contact with rifampicin, with consequent degradation in acid stomach and modulate the release of isoniazid in the intestine. Granules of isoniazid were obtained by wet method using both alcoholic and aqueous solutions of PVP K-30 as aggregating and binder agent, at proportions of 5, 8 and 10%. The influence of the excipients (starch, cellulose or filler default) on the physical and technological properties of the granules was investigated. The pellets were produced by extrusionesferonization technique using isoniazid and microcrystalline cellulose MC 101 (at the proportion of 85:15) and aqueous solution of 1% Methocel as platelet. The pellets presented advantages over granular, such as: higher apparent density, smaller difference between apparent and compaction densities, smoother surface and, especially, smaller friability, and then were coated with an organic solution of Acrycoat L 100 ® in a fluidized bed. Different percentages of coating (15, 25 and 50%) were applied to the pellets which had their behavior evaluated in vitro by dissolution in acidic and basic medium. Rifampicin dissolution in the presence of uncoated and coated isoniazid pellets was evaluated too. The results indicate that the gastro resistance was only achieved with the greatest amount of coating and isoniazid is released successfully in basic step. The amount of rifampicin in the dissolution medium when the isoniazid pellets were not coated was lower than in the presence of enteric release pellets. Therefore, the polymer Acrycoat L 100 ® was efficient for coating with gastro-resistant function and can solve the problem of low bioavailability of rifampicin and help to reduce its dosage

Influência do tamanho da semente na emergência das plântulas de longan (Dimocarpos longan Lour)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Pré-compostagem de cadáveres de bovinos acometidos pelo botulismo

Foram pré-compostados, em células individuais e isoladas, cinco cadáveres de bovinos acometidos pelo botulismo com a finalidade de monitorar a presença de esporos de Clostridium botulinum e de toxina botulínica antes e após o processo de decomposição em leira estática com fonte de carbono. O diagnóstico da intoxicação nos animais foi baseado nas características clínico-patológicas, epidemiológicas ou laboratoriais. Dos cinco bovinos com evolução clínica crônica de botulismo, cujos cadáveres foram pré-compostados, três foram acometidos pela toxina tipo D, um pelo complexo CD e um dos animais foi negativo na tentativa de detecção da toxina e de esporos da bactéria nas vísceras pelo bioensaio e neutralização em camundongo. O processo de pré-compostagem foi realizado em leira estática, com o uso de material carbonáceo umidificado como substrato e esquartejamento do animal, vedado individualmente com lona plástica e sem aeração por um período de 50 dias. A temperatura das leiras foi monitorada durante o período e oscilou de 40,5-52,4ºC. Após a abertura das leiras, pôde-se constatar a completa decomposição de todo material mole, com redução significativa do seu peso (de 26,5-44,5%), restando apenas os ossos. Não foi detectado esporo ou toxina botulínica no interior dos ossos (n=5 para cada cadáver). Nas 200 amostras examinadas do homogeneizado restante (n=40 para cada cadáver), em apenas duas amostras de uma leira foram detectados esporos de C. botulinum tipo C, enquanto que todas foram negativas para a tentativa de detecção da toxina botulínica pelo bioensaio em camundongo. da forma como foi avaliado o processo de pré-compostagem de bovinos mortos pela intoxicação botulínica não contribuiu para a proliferação de C. botulinum.

Genetic similarity between staphylococcus sp isolated from human and hospital settings, and susceptibility to different antimicrobials

Foram coletadas 143 amostras de mãos de humanos e camas hospitalares, através de swabs no caldo BHI, em um hospital escola da cidade de Ribeirão Preto/SP. As amostras coletadas foram incubadas a 37ºC por 24 horas e após este período as culturas foram semeadas em placas de Petri contendo agar Staphylococcus Médium 110. As colônias típicas do gênero Staphylococcus foram colhidas e estocados a 4ºC até o momento de elaboração das provas de catalase, manitol, hemólise, DNAse e coagulase. As cepas isoladas foram analisadas através da técnica de RAPD-PCR para verificar o grau de similaridade. A sensibilidade das cepas isoladas foi testada frente a 10 diferentes antibióticos. Das 92 cepas de Staphylococcus sp isoladas, 67 (72,8%) foram identificados como Staphylococcus coagulase-negativas e 25 (27,2%) como Staphylococcus coagulase-positivas. A análise de similaridade mostrou uma grande heterogeneidade entre as cepas, entretanto foram isoladas algumas cepas com 100% de similaridade. Resistência a oxacilina foi encontrada em 39 (42%) cepas. Duas cepas de estafilococos coagulase-negativos mostraram-se resistentes a vancomicina. Onze cepas (12%) de estafilococos foram consideradas multirresistentes. Medidas de desinfecção das mãos de pessoal e dos leitos hospitalares e a racionalização do uso indiscriminado de antibióticos podem contribuir para a queda da transmissão de patógenos e diminuição da pressão de seleção, e conseqüentemente diminuindo a freqüência e letalidade das infecções nosocomiais.

Trajetória do hospital dia Dr. Elger nunes: um recorte histórico da psiquiatria e saúde mental no Rio Grande do Norte

In Brazil, the mental health network proposed by the Psychiatric Reform inserts the intermediate and replacement services in the pursuit of alignment or resocialization of patients with mental and behavioral disorder in the community. Was adopted, among other services, the Center for Psychosocial Care, Home Therapy, Sheltered Home, Day Hospital and psychiatric beds in general hospital. In this context, the State of Rio Grande do Norte implanted the Day Hospital Dr. Elger Nunes (HDEN) in Natal / RN in 1996, linked to State Department of Public Health. At HDEN happened a multi and interdisciplinary therapeutic work, besides being the scene of disciplinary practices, and extension projects for graduate courses in Higher Education Institutions in the city. However, with the process of decentralization of local services, the hospital was terminated by an administrative state act in 2006, leaving damage to the activities provided to users, disciplinary practices and extension activities. From this breakdown, the objective was to narrate the trajectory of HDEN through a multidisciplinary team of professionals and teachers who used it as a field of disciplinary practices. It is characterized as a documental and qualitative, backed in the technique of thematic oral history, following the phases: authorization of the interviewee, interview recording, transcription, textualization and transcreation of the material obtained. We used documents, ordinances, general reports of activities, among others, plus interviews to fifteen employees who used this service, being thirteen part of the multidisciplinary team of professionals and two graduation professors of health care area, nursing and medicine. The stories collected were organized according to the technique chosen, respecting its steps. In preparing the body subjected to ALCESTE computer program, priority was given to the vital tone for the formation of categories and classes elected by the program, structured in three thematic areas. In the first axis, called Trajectory of HDEN, were recalled the beginning of its activities, the steps of that time, their activities, and its actors - users, families, professionals, and teaching practices. The second axis has dealt with the process of extinction of HDEN, rescuing the feelings of employees, the main reasons given at the time and immediate postextinction scenario. And the third axis revealed in an articulated form the situation of mental health in Natal / RN, listing to the challenges and prospects for the psychosocial care, starting from the trajectory of HDEN with emphasis on activities. Moreover, the trajectory of HDEN provides recognition of the historical basis outlined in the constitution of the network of substitute services present in the current scenario of psychosocial care in the city of Natal and in RN.

Conquistas e desafios do processo de trabalho de enfermagem: o caso dos CAPS em Natal/RN

The Brazilian Psychiatric Reform proposes creating linkages / interactions of the mentally ill with civil society , through promoting citizenship and assistance to the mentally ill. The deinstitutionalization of mental health advocates from the guidelines decreased supply of hospital beds and consequently the creation of substitute services for psychosocial care, especially with regard to therapeutic practices emancipatory. From this scenario, the present study aims to investigate the relevance and challenges of the process of nursing work in CAPS III in Natal / RN. It is descriptive research with a qualitative and exploratory. The subjects are employees of the nursing team in CAPS III East of Natal / RN. This service has actions for the psychosocial care of the subjects treated with daily multidisciplinary care by behaving the length of treatment and follow-up activities, industrial and cultural activities. Employ the semi-structured interview as a tool for data collection. The data analysis was done by means of thematic analysis proposed by Bardin. Thus, this sought to bring to the discussion of how this process is consolidated in the daily service. Thus, purposed to contribute to the debate on deinstitutionalization in psychosocial care as a guideline in the process of mental health nursing work in a CAPSIII, Natal / RN

Modelagem aplicada à análise de desempenho do provedor de serviços de uma rede de automação hospitalar ieee 802.3/pm-ah de tempo real

The incorporate of industrial automation in the medical are requires mechanisms to safety and efficient establishment of communication between biomedical devices. One solution to this problem is the MP-HA (Multicycles Protocol to Hospital Automation) that down a segmented network by beds coordinated by an element called Service Provider. The goal of this work is to model this Service Provider and to do performance analysis of the activities executed by in establishment and maintenance of hospital networks

Uma implementação da análise de componentes independentes em plataforma de hardware reconfigurável

Blind Source Separation (BSS) refers to the problem of estimate original signals from observed linear mixtures with no knowledge about the sources or the mixing process. Independent Component Analysis (ICA) is a technique mainly applied to BSS problem and from the algorithms that implement this technique, FastICA is a high performance iterative algorithm of low computacional cost that uses nongaussianity measures based on high order statistics to estimate the original sources. The great number of applications where ICA has been found useful reects the need of the implementation of this technique in hardware and the natural paralelism of FastICA favors the implementation of this algorithm on digital hardware. This work proposes the implementation of FastICA on a reconfigurable hardware platform for the viability of it's use in blind source separation problems, more specifically in a hardware prototype embedded in a Field Programmable Gate Array (FPGA) board for the monitoring of beds in hospital environments. The implementations will be carried out by Simulink models and it's synthesizing will be done through the DSP Builder software from Altera Corporation.

Secagem de misturas de polpa de frutas tropicais em leito de jorro

Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C

Concepção de um secador rotatório para secagem do cefalotórax do camarão

The present work has as objective the knowledge of the process of drying of the cephalothorax of shrimp to give support the industry to make possible the use of this byproduct. In this sense, the process conditions in this tray dryer and spouted bed were analyzed. With these results, it was projected and constructs a dryer with specific characteristics for the drying of the cephalothorax. The desorption isotherms were obtained by the dynamic method in the temperatures of 20, 35 and 50º C and in the interval of 10-90% of relative humidity. It was observed that the product in form of powder can be conserved with larger stability for lower relative humidity to 40%. The curves of drying of the dryer of fixed bed were adjusted for the models: single exponential, biparametric exponential and Page. The model biparametric exponential more adequately described all the drying conditions studied. The tests carry out in spouted bed showed high drying rate for the material in the paste form in beds active dynamicly-fluid, provely the necessity of a feeding in shorter intervals of time to increase the thermal efficiency of the process. The projected dryer, be considered the obtained results, it was a rotary dryer with inert bed, feed co-current, discharge in cyclone to take place the separation gas-solid, and feed carry out in intervals of 2 minutes. The optimization of the equipment projected it was accomplished used the complete factorial experimental design 24, this had as independent variables temperature velocity of the air, feed flow rate and encapsulated concentration (albumin), as variables answers the thermal efficiency, the moisture content of obtained powder, total time of test and the efficiency of production of powder in several points of processing. The results showed that the rotary dryer with inert bed can present, also, good results if applied industrially

Análise da adição de resíduo oriundo do tratamento de esgotos em massa cerâmica utilizada para fabricação de telhas

Sludge of Wastewater Treatment Plants (WTPs) disposal is a problem for any municipality, for this reason the amount of sludge production is now a key issue in selecting treatment methods. It is necessary to investigate new applications for this waste type, due to the restrictions imposed by the environmental organs. The raw materials used in the Red Ceramic, are generally very heterogeneous, for this reason, such materials can tolerate the presence of different types of wastes. In Rio Grande do Norte, the roof tiles production corresponds to 60,61% from the total of ceramic units produced. Due to the importance of the ceramic industry of roof tiles for the state, allied to the environmental problem of the sludge disposal, this work had for objective to verify the possibility of the incorporation of sewage sludge in ceramic body used for production of roof tiles. In the research, sludge originating from drying beds of WTP of the Central Campus from UFRN and clays originating from a ceramic industry from Goianinha/RN were used. The raw materials were characterized by techniques of: analysis of particles distribution by diffraction to laser; real density; consistence limits; chemical analysis by X-ray fluorescence; mineralogical analysis by X-ray diffraction; organic matter; and solids content. Five batches of roof tiles were manufactured in the approximate dosages of 2%, 4%, 6%, 8% and 10%. To evaluate the properties of each final product, tests of water absorption, impermeability, bending strength, leachability and solubility were accomplished. The roof tiles manufactured with sludge presented characteristics similar to the roof tiles without sludge in relation to the environmental risk. The results showed that it is possible to use approximately up to 4% of sludge in ceramic bodies for production of roof tiles. However, it is observed that the high amount of organic matter (71%) present in the sludge is shown as factor that limits the sludge incorporation in ceramic bodies, worsening the quality of the roof tiles. It is necessary the use of mixtures of different raw materials under point of view of the granulometry and of the other chemical and mineralogical properties for the obtaining of a satisfactory mass to the production of ceramic roof tiles

Fission-track dating of South American natural glasses: an overview

Although many glass-bearing horizons can be found in South American volcanic complexes or sedimentary series, only a relatively few tephra and obsidian-bearing volcanic fields have been studied using the fission-track (FT) dating method. Among them, the volcanics located in the Sierra de Guamani (east of Quito, Ecuador) were studied by several authors. Based upon their ages, obsidians group into three clusters: (1) very young obsidians, similar to 0.2Ma old, (2) intermediate-age obsidians, similar to 0.4- similar to 0.8 Ma old, and (3) older obsidians, similar to 1.4- similar to 1.6 Ma old. The FT method is also an efficient alternative technique for identification of the sources of prehistoric obsidian artefacts. Provenance studies carried out in South America have shown that the Sierra de Guamani obsidian occurrences were important sources of raw material for toot making during pre-Columbian times. Glasses originated from these sources were identified in sites distributed over relatively wide areas of Ecuador and Colombia.Only a few systematic studies on obsidians in other sectors were carried out. Nevertheless, very singular glasses have been recognised in South America, such as Macusanite (Peru) and obsidian Quiron (Argentina), which are being proposed as additional reference materials for FT dating. Analyses of tephra beds interstratified with sedimentary deposits revealed the performance of FT dating in tephrochronological studies. A remarkable example is the famous deposit outcropping at Farola Monte Hermoso, near Bahia Blanca (Buenos Aires Province), described for the first time by the middle of the 19th century by Charles Darwin.Considering the large number of volcanic glasses that were recognised in volcanic complexes and in sedimentary series, South America is a very promising region for the application of FT dating. The examples given above show that this technique may yield important results in different disciplinary fields. (c) 2005 Elsevier Ltd. All rights reserved.

Monitoramento de fungos anemófilos e de leveduras em unidade hospitalar

OBJETIVO: Monitorar e caracterizar fungos anemófilos e leveduras de fontes bióticas e abióticas de uma unidade hospitalar. MÉTODOS: As coletas foram realizadas mensalmente e em dois períodos, do centro cirúrgico e unidades de terapia intensiva adulto e neonatal em hospital de Araraquara, Estado de São Paulo. Para coleta de fungos anemófilos foi utilizado amostrador tipo Andersen de simples estágio. A pesquisa de leveduras foi feita das mãos e de orofaringe de profissionais de saúde, bem como de superfícies de leitos e de maçanetas das áreas críticas. RESULTADOS: Foram recuperados do centro cirúrgico 32 gêneros de fungos anemófilos e 31 das unidades de terapia intensiva. Os gêneros mais freqüentemente isolados foram Cladophialophora spp., Fusarium spp., Penicillium spp., Chrysosporium spp. e Aspergillus spp. Durante o período de estudo, houve reforma e implantação de uma unidade dentro do hospital, que coincidiu com o aumento na contagem de colônias de Cladophialophora spp., Aspergillus spp. e Fusarium spp. Leveduras foram encontradas em 39,4% dos profissionais de saúde (16,7% das amostras dos espaços interdigitais, 12,1% do leito subungueal e 10,6% da orofaringe) e, em 44% das amostras do mobiliário, com predomínio do gênero Candida (C. albicans, C. guilliermondii, C. parapsilosis e C. lusitaniae) seguido por Trichosporon spp. CONCLUSÕES: Observou-se número relativamente elevado de fungos anemófilos (potencialmente patogênicos) em áreas especiais e níveis expressivos de leveduras em fontes bióticas e abióticas. O monitoramento microbiológico ambiental deve ser realizado, principalmente em salas especiais com pacientes imunocomprometidos, sujeitos à exposição de patógenos do meio ambiente, assim como, advindos de profissionais de saúde.

In vitro drug permeation from chitosan pellets

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Uma avaliação do serviço de atenção domiciliar/programa melhor em casa: o caso do hospital Monsenhor Walfredo Gurgel

This dissertation try to understand how management actions implemented by Monsenhor Walfredo Gurgel Hospital in the city of Natal promote effectively the benefits of Home Care Services / Programa Melhor em Casa . The research is exploratory and descriptive, qualitative approach. Data were collected through document analysis and the interviews with the managers of the Program in Health Department and Hospital beyond the questionnaires with the home care teams and technical management unit of Hospital Jobs. The information were treatment trough categories that analyzed to implemented actions and program objectives. The results show that: the practices carried out by the host teams produce the humanization of care by seeking to ensure access to health services and solving human form; networks of health care are not yet finalized hindering the referral of patients to other units, the networks allow support from other institutions to minimize the problems encountered, the management unit vacancies allows the reduction of costs, mainly by regulating beds and record of health initiatives in home care assists in the monitoring and evaluation process of the Services Home Care / Programa Melhor em Casa primarily the epidemiological profile and patients individual treatment plan. Concludes that most of the actions implemented by the Hospital contribute to the effectiveness of the goals of Programa Melhor em Casa