Feed-related selenium poisoning in swine

The following case report describes a selenium toxicosis in a pig-fattening farm of two finisher groups. The diseased animals partly showed ataxia and paresis or intense lameness in connection with band-like ablation of the epidermis at the coronary band. Some of them suffered from alopecia. Foot-and-mouth disease and swine vesicular disease were excluded by serological tests. Dissection revealed a multifocal bilateral symmetric poliomyelomalacia. Histological changes in the claws ranged from severe cell-decay in the germinative layer to distinctive decay of the stratum corneum. Due to damage of the claw epidermis the corium was partly exposed. Feed analysis revealed 100-fold increased selenium content in the finishing premix from the feed mill and as a result 20- to 60-fold increased selenium values in feed samples from the farm-made finisher mixture. Selenium concentration in the blood of diseased animals was 4- to 10-fold higher than normal values, which confirmed the tentative diagnosis of a selenium toxicosis.

Micromorphology and adhesive performance of Er:YAG laser-treated dentin of primary teeth

This study evaluated (1) the micromorphology by scanning electron microscopy (SEM) and (2) the adhesive performance by microtensile bond strength (μTBS) of diamond bur-treated dentin compared to Er:YAG laser-treated dentin of human primary teeth. (1) For qualitative SEM evaluation, dentin of 18 second primary molars (n = 3/method) was treated with either diamond bur as a control (group 1a: 40 μm diamond bur only (clinical situation); group 1b: grinding + 40 μm diamond bur) or with Er:YAG laser (group 2a (clinical situation, manufacturer's settings): 200 mJ/25 Hz (5 W) + 100 mJ/35 Hz (3.5 W) laser only; group 2b (experimental setting "high"): grinding + 400 mJ/20 Hz (8 W); group 2c (manufacturer's setting "finishing"): grinding + 100 mJ/35 Hz (3.5 W); group 2d (experimental setting "low"): grinding + 50 mJ/35 Hz (1.75 W)). (2) For evaluation of adhesive performance, 64 second primary molars were divided into four groups and treated as described for group 1b and groups 2b/c/d (n = 16/method), and μTBS of Clearfil SE/Clearfil Majesty Esthetic to dentin was measured. The SEM micrographs were qualitatively analyzed. The μTBS values were compared with a Kruskal-Wallis test. The significance level was set at α = 0.05. SEM micrographs showed the typical micromorphologies with a smear layer for the diamond bur groups and open dentin tubules for all laser-treated groups. However, in group 2d, the laser beam had insufficiently irradiated the dentin area, rendering the underlying ground surface partly visible. There were no statistically significant differences between μTBS values of the four groups (p = 0.394). This suggests that Er:YAG laser treatment of dentin of primary molars provides bond strengths similar to those obtained following diamond bur treatment.

Toxoplasma gondii in Switzerland: a serosurvey based on meat juice analysis of slaughtered pigs, wild boar, sheep and cattle

Toxoplasmosis is one of the most important zoonotic diseases worldwide and is caused by the protozoan Toxoplasma gondii. Besides vertical infection during pregnancy, humans can get infected post-natally either by peroral uptake of sporulated Toxoplasma oocysts or by ingestion of tissue cysts upon consumption of raw or undercooked meat. The aim of this study was to approximate the risk of human infection via meat consumption by estimating the seroprevalence of T. gondii in slaughtered animals in Switzerland and to compare data with prevalences assessed 10 years ago. The study included pigs, cattle, sheep and wild boar of different age groups and housing conditions whenever possible and applicable. A P-30-ELISA was used to detect T. gondii-specific antibodies and to determine seroprevalences in meat juice of slaughtered animals. A total of 270 domestic pigs (120 adults, 50 finishing, 100 free-ranging animals), 150 wild boars, 250 sheep (150 adults, 100 lambs) and 406 cattle (47 calves, 129 heifers, 100 bulls, 130 adult cows) were tested. Seropositivity increased with the age of the assessed animals. Independent of the age-group, the overall seroprevalence was lowest in wild boars (6.7%), followed by pigs (23.3%), cattle (45.6%) and sheep (61.6%), respectively. Conventional fattening pigs and free-ranging pigs surprisingly had comparable seroprevalences (14.0% and 13.0%, respectively). Unlike in other European countries, where generally a decrease in the number of seropositive animals had been observed, we found that the prevalence of seropositive animals, when compared with that of 10 years ago, had increased for most species/age groups. Conclusively, the results demonstrated a high seroprevalence of T. gondii in animals slaughtered for meat production and revealed that increasing age of the animals is a more important risk factor than housing conditions in Switzerland.

Prevalence and genotypes of Toxoplasma gondii in feline faeces (oocysts) and meat from sheep, cattle and pigs in Switzerland

The protozoan parasite Toxoplasma gondii infects almost all warm blooded animal species including humans, and is one of the most prevalent zoonotic parasites worldwide. Post-natal infection in humans is acquired through oral uptake of sporulated T. gondii oocysts or by ingestion of parasite tissue cysts upon consumption of raw or undercooked meat. This study was undertaken to determine the prevalence of oocyst-shedding by cats and to assess the level of infection with T. gondii in meat-producing animals in Switzerland via detection of genomic DNA (gDNA) in muscle samples. In total, 252 cats (44 stray cats, 171 pet cats, 37 cats with gastrointestinal disorders) were analysed coproscopically, and subsequently species-specific identification of T. gondii oocysts was achieved by Polymerase Chain Reaction (PCR). Furthermore, diaphragm samples of 270 domestic pigs (120 adults, 50 finishing, and 100 free-range animals), 150 wild boar, 250 sheep (150 adults and 100 lambs) and 406 cattle (47 calves, 129 heifers, 100 bulls, and 130 adult cows) were investigated by T. gondii-specific real-time PCR. For the first time in Switzerland, PCR-positive samples were subsequently genotyped using nine PCR-restriction fragment length polymorphism (PCR-RFLP) loci (SAG2, SAG3, BTUB, GRA6, c22-8, c29-2, L358, PK1 and Apico) for analysis. Only one of the cats shed T. gondii oocysts, corresponding to a T. gondii prevalence of 0.4% (95% CI: 0.0-2.2%). In meat-producing animals, gDNA prevalence was lowest in wild boar (0.7%; 95% CI: 0.0-3.7%), followed by sheep (2.0%; 95% CI: 0.1-4.6%) and pigs (2.2%; 95% CI: 0.8-4.8%). The highest prevalence was found in cattle (4.7%; 95% CI: 2.8-7.2%), mainly due to the high prevalence of 29.8% in young calves. With regard to housing conditions, conventional fattening pigs and free-range pigs surprisingly exhibited the same prevalence (2.0%; 95% CI: 0.2-7.0%). Genotyping of oocysts shed by the cat showed T. gondii with clonal Type II alleles and the Apico I allele. T. gondii with clonal Type II alleles were also predominantly observed in sheep, while T. gondii with mixed or atypical allele combinations were very rare in sheep. In pigs and cattle however, genotyping of T. gondii was often incomplete. These findings suggested that cattle in Switzerland might be infected with Toxoplasma of the clonal Types I or III, atypical T. gondii or more than one clonal Type.

A study to demonstrate freedom of Trichinella spp. in domestic pigs in Switzerland

Trichinellosis is a food-borne zoonotic disease caused by the nematode Trichinella spp. Many omnivorous and carnivorous animal species can act as host for this parasite, including domestic pigs. To protect public health, it should be ensured that pork should not contain infective Trichinella larvae. Surveillance for Trichinella spp. can be done using direct (larval detection) and indirect (antibody detection) diagnostic techniques. The aim of this study was to demonstrate the absence of infection in Swiss domestic pigs. An ELISA was used as the initial screening test, and sera reacting in ELISA were further investigated using both a Western blot for serology and an artificial digestion test with 20 g of diaphragm tissue for larval detection. A total of 7412 adult pigs, 9973 finishing pigs and 2779 free-ranging pigs were tested. Samples from 17 (0.23%) adult pigs, 16 (0.16%) finishing pigs and nine (0.32%) free-ranging pigs were ELISA-positive, but all of these sera were subsequently negative by Western blot and by the artificial digestion method. Based on these findings, an absence of Trichinella infections in adult pigs (target prevalence 0.04%) and finishing pigs (target prevalence 0.03%) can be concluded. The results also demonstrated that the prevalence of Trichinella infections does not exceed 0.11% in free-ranging pigs, the group with the highest risk of exposure.

Antimicrobial resistance in bacteria from Swiss veal calves at slaughter

Bacteria with antimicrobial resistance can be transferred from animals to humans and may compromise antimicrobial treatment in case of infection. To determine the antimicrobial resistance situation in bacteria from Swiss veal calves, faecal samples from 500 randomly selected calves originating from 129 farms were collected at four big slaughterhouses. Samples were cultured for Escherichia coli, Enterococcus sp. and Campylobacter sp. and isolated strains were tested for antimicrobial susceptibility to selected antimicrobial agents by the minimal inhibitory concentration technique using the broth microdilution method. From 100 farms, data on farm management, animal husbandry and antimicrobial treatments of the calves were collected by questionnaire. Risk factors associated with antimicrobial resistance were identified by logistic regression. In total, 467 E. coli, 413 Enterococcus sp. and 202 Campylobacter sp. were isolated. Of those, 68.7%, 98.7% and 67.8%, respectively, were resistant to at least one of the tested antimicrobial agents. Resistance was mainly observed to antimicrobials frequently used in farm animals. Prevalence of resistance to antimicrobials important for human treatment was generally low. However, a rather high number of quinupristin/dalfopristin-resistant Enterococcus faecium and ciprofloxacin-resistant Campylobacter sp. were detected. External calf purchase, large finishing groups, feeding of milk by-products and administration of antimicrobials through feed upon arrival of the animals on the farm significantly increased the risk of antimicrobial resistance at farm level. Participation in a quality assurance programme and injection of a macrolide upon arrival of the animals on the farm had a protective effect. The present study showed that veal calves may serve as a reservoir for resistant bacteria. To ensure food safety, veal calves should be included in the national monitoring programme for antimicrobial resistance in farm animals. By improving farm management and calf husbandry the prevalence of resistance may be reduced.

Influence of beveling and ultrasound application on marginal adaptation of box-only Class II (slot) resin composite restorations

A laboratory study was performed to assess the influence of beveling the margins of cavities and the effects on marginal adaptation of the application of ultrasound during setting and initial light curing. After minimal access cavities had been prepared with an 80 microm diamond bur, 80 box-only Class II cavities were prepared mesially and distally in 40 extracted human molars using four different oscillating diamond coated instruments: (A) a U-shaped PCS insert as the non-beveled control (EMS), (B) Bevelshape (Intensiv), (C) SonicSys (KaVo) and (D) SuperPrep (KaVo). In groups B-D, the time taken for additional bevel finishing was measured. The cavities were filled with a hybrid composite material in three increments. Ultrasound was also applied to one cavity per tooth before and during initial light curing (10 seconds). The specimens were subjected to thermomechanical stress in a computer-controlled masticator device. Marginal quality was assessed by scanning electron microscopy and the results were compared statistically. The additional time required for finishing was B > D > C (p < or = 0.05). In all groups, thermomechanical loading resulted in a decrease in marginal quality. Beveling resulted in higher values for "continuous" margins compared with that of the unbeveled controls. The latter showed better marginal quality at the axial walls when ultrasound was used. Beveling seems essential for good marginal adaptation but requires more preparation time. The use of ultrasonic vibrations may improve the marginal quality of unbeveled fillings and warrants further investigation.

A Geological Report on Several Localities in the Northwestern Tobacco Root Mountains

To better acquaint seniors in Geology and mining with actual field practice, the Montana School of Mines offer a course in Geologic Field Mapping, during the three weeks preceding the opening of the fall semester. The first two weeks are spent in actual field mapping of the geologic formations near Whitehall, Montana, while the third week is spent back on the campus compiling data and finishing maps started in the field.

Surface quality of profile extrusion dies manufactured by Selective Laser Melting

The design of plastics profile extrusion dies becomes increasingly more complex so that conventional manufacture processes reach their limit in the die manufacture. A feasible manufacture of arbitrarily designed dies is only possible by additive manufacturing. An especially promising process is hereby the Selective Laser Melting with which metal parts with series identical mechanical properties can be produced without the need for part specific tooling or downstream sintering processes. Disadvantegeous is, however, the relatively rough surface of additively manufactured parts. Against this background, the manufacturing of an profile extrusion die by Selective Laser Melting and the plastics profile surface quality, that can be achieved with such dies, is investigated. For this purpose, profiles are extruded both with an additively manufactured die and a conventionally milled sample of the same die geometry. In case of the additively manufactured die a concept for the surface finishing of the flow channel is required, which can be applied to arbitrarily shaped geometries. Therefore, two different reworking processes are applied only to the die land of the flow channel. The comparison of the surface roughnesses shows that the additively manufactured die with a polished die land delivers the same surface quality as the conventional die.

Evaluation of Synovex Plus, Synovex S and Revalor S Implants in Feedlot Steers

One hundred forty-four crossbred yearling steers with an average weight of 841 pounds were used in a 116- day experiment. Steers received either 1) no implant, 2) Synovex S¨, 3) Revalor S¨, or 4) Synovex Plus¨. All implanted groups consumed more feed and gained faster and more efficiently than non-implanted steers. There were no significant differences in gain, feed intake or feed efficiency among implanted groups, though steers with the estrogen + trenbolone acetate combination implants were numerically superior to those implanted with Synovex S¨. There were no differences in feedlot performance between the two combination implants. Implants increased carcass weight with no significant effects on fat thickness or carcass quality grades. The combination implants containing trenbolone acetate increased ribeye area and increased masculinity of the carcasses. These results indicate Synovex Plus¨ is an effective implant for finishing steers.

Effects of Initial Body Condition, Frame Size and Concentration of Dietary Energy on Carcass Value of Finished Steers

Yearling steers were sorted into four groups based on hip height and fat cover at the start of the finishing period. Each group of sorted steers was fed diets containing 0.59 or 0.64 Mcal NEg per pound of diet. The value of each carcass was determined by use of the Oklahoma State University Boxed Beef Calculator. Sorting to increase hip height decreased the percentage of Choice carcasses and fat cover, increased ribeye area, and had no effect on carcass weight or yield grades 1 and 2. Sorting to decrease initial fat cover decreased carcass weight, carcass fat cover, and percentage of choice carcasses and increased the proportion of yield grades 1 and 2 carcasses. Concentration of energy in the finishing diet had no effect on carcass measurements. Increasing the percentage of yield grades 1 and 2 carcasses did not result in increased economic value of the carcasses when quality grades were lower and when there was a wide spread between Choice and Select carcasses, as occurred in 1996. With less spread between Choice and Select, as in 1997, sorting the cattle to increase yield grades 1 and 2 resulted in increased value, especially for close-trim boxed beef. The results of this study emphasize the importance of knowing how carcasses will grade before selecting a valuebased market for selling cattle.

Effects of Initial Fat Thickness, Hip Height, and Concentration of Dietary Energy on Growth of Area of the Longissimus dorsi Muscle and Subcutaneous Fat of Yearling Steers

Steers were sorted into four groups based on hip height and fat cover at the start of the finishing period. Each group of sorted steers was fed diets containing 0.59 or 0.64 Mcal NEg per lb. of diet dry matter. Steers with less initial fat cover (0.08 in.) compared with those with more (0.17) had less carcass fat cover 103 days later. The steers with less fat cover accumulated fat at a faster rate, but this was not apparent prior to 80 days. Accretion of fat was best predicted by an exponential growth equation, and was not affected by the two concentrations of energy fed in this study. Steers with greater initial height accumulated fat cover at a slower rate than shorter steers. This difference was interpreted to mean that large-frame steers accumulate subcutaneous fat at a slower rate than medium-frame steers. Increase in area of the ribeye was best described by a linear equation. Initial fat cover, hip height, and concentrations of energy in the diet did not affect rate of growth of this muscle. Predicting carcass fat cover from the initial ultrasound measurement of fat thickness found 46 of the 51 carcasses with less than 0.4 in. of fat cover. Twelve carcasses predicted to have less than 0.4 in. of fat cover had more than 0.4 in. Five carcasses predicted to have more than 0.4 in. actually had less than that. Accurate initial measurements of initial fat thickness with ultrasound might be a useful measurement to sort cattle for specific marketing grids.

Evaluation of Condition Scoring of Feeder Calves as a Tool for Management and Nutrition

Two experiments were conducted to evaluate the effects of body condition scores of beef calves on performance efficiency and carcass characteristics. In Experiment 1, 111 steer calves were stratified by breed and condition score (CS) and randomly allotted to 14 pens. The study was analyzed as a 2 x 3 factorial design, with two breeds (Angus and Simmental) and three initial CS (4.4, 5.1, and 5.6). In Experiment 2, 76 steer calves were allotted to six pens by CS. The resultant pens averaged 3.9, 4.5, 4.7, 5.0, 5.1, and 5.6 in CS. Calves in both studies were fed a corn-based finishing diet formulated to 13.5% crude protein. All calves were implanted with Synovex- SÒ initially and reimplanted with Revalor-SÒ. In Experiment 1, 29-day dry matter intake (lb/day) increased with CS (17.9, 18.1, and 19.1 for 4.4, 5.1, and 5.6, respectively; p < .04). Daily gain (29 days) tended to decrease with increasing CS (4.19, 3.71, and 3.26; p < .13). Days on feed decreased with increasing CS (185, 180, and 178d; p < .07). In Experiment 2, daily gains also increased with decreasing initial CS for the first 114 days (p < .05) and tended to increase overall (p < .20). In Experiment 1, calves with lower initial CS had less external fat at slaughter (.48, .53, and .61 in. for CS 4.4, 5.1, and 5.6, respectively; p < .05). This effect was also noted at slaughter (p < .10), as well as at 57 days (p < .06) and at 148 days (p < .06) as measured by real-time ultrasound. Measurements of intramuscular fat and marbling were not different in either study. These data suggest that CS of feeder calves may be a useful tool for adjusting energy requirements of calves based on body condition. Also, feeder cattle may be sorted into outcome or management groups earlier than currently practiced using body condition and/or real-time ultrasound.

The Effect of Open-Irrigated Radiofrequency Catheter Ablation of Atrial Fibrillation on Left Atrial Pressure and B-Type Natriuretic Peptide

Background Open-irrigated radiofrequency catheter ablation (oiRFA) of atrial fibrillation (AF) imposes a volume load and risk of pulmonary edema. We sought to assess the effect of volume administration during ablation on left atrial (LA) pressure and B-type natriuretic peptide (BNP). Methods LA pressure was measured via transseptal sheath at the beginning and end of 44 LA ablation procedures in 42 patients. BNP plasma levels were measured before and after 10 procedures. Results A median of 3,255 (interquartile range [IQR], 2,014)-mL saline was administered during the procedure. During LA ablation, the median fluid balance was +1,438 (IQR, 1,109) mL and LA pressure increased by median 3.7 (IQR, 5.9) mm Hg (P < 0.001). LA pressure did not change in the 19 procedures with furosemide administration (median ΔP = −0.3 [IQR, 7.1] mm Hg, P = 0.334). The correlation of LA pressure and fluid balance was weak (rs = 0.383, P = 0.021). BNP decreased in all four procedures starting in AF or atrial tachycardia and then converting to sinus rhythm (P = 0.068), and increased in all six procedures starting and finishing in sinus rhythm (P = 0.028). After ablation, symptomatic volume overload responding to diuresis occurred in three patients. Conclusions A substantial intravascular volume load during oiRFA can be absorbed with little change in LA pressure, such that LA pressure is not a reliable indicator of the fluid balance. Subsequent redistribution of the volume load imposes a risk after the procedure. Conversion to sinus rhythm may improve ability to acutely accommodate the volume load.

The effect of ego depletion on sprint start reaction time

In the current study, we consider that optimal sprint start performance requires the self-control of responses. Therefore, start performance should depend on athletes' self-control strength. We assumed that momentary depletion of self-control strength (ego depletion) would either speed up or slow down the initiation of a sprint start, where an initiation that was sped up would carry the increased risk of a false start. Applying a mixed between- (depletion vs. nondepletion) and within- (before vs. after manipulation of depletion) subjects design, we tested the start reaction times of 37 sport students. We found that participants' start reaction times decelerated after finishing a depleting task, whereas it remained constant in the nondepletion condition. These results indicate that sprint start performance can be impaired by unrelated preceding actions that lower momentary self-control strength. We discuss practical implications in terms of optimizing sprint starts and related overall sprint performance.