Extending ASSERT for HW/SW Co-design

Embedded systems are commonly designed by specifying and developing hardware and software systems separately. On the contrary, the hardware/software (HW/SW) co-development exploits the trade-offs between hardware and software in a system through their concurrent design. HW/SW Codevelopment techniques take advantage of the flexibility of system design to create architectures that can meet stringent performance requirements with a shorter design cycle. This paper presents the work done within the scope of ESA HWSWCO (Hardware-Software Co-design) study. The main objective of this study has been to address the HW/SW co-design phase to integrate this engineering task as part of the ASSERT process (refer to [1]) and compatible with the existing ASSERT approach, process and tool, Advances in the automation of the design of HW and SW and the adoption of the Model Driven Architecture (MDA) [9] paradigm make possible the definition of a proper integration substrate and enables the continuous interaction of the HW and SW design paths.

Design of a compact objective for SWIR applications

Lately the short-wave infrared (SWIR) has become very important due to the recent appearance on the market of the small detectors with a large focal plane array. Military applications for SWIR cameras include handheld and airborne systems with long range detection requirements, but where volume and weight restrictions must be considered. In this paper we present three different designs of telephoto objectives that have been designed according to three different methods. Firstly the conventional method where the starting point of the design is an existing design. Secondly we will face design starting from the design of an aplanatic system. And finally the simultaneous multiple surfaces (SMS) method, where the starting point is the input wavefronts that we choose. The designs are compared in terms of optical performance, volume, weight and manufacturability. Because the objectives have been designed for the SWIR waveband, the color correction has important implications in the choice of glass that will be discussed in detail

Solid catadioptric telephoto lens design with SMS method

Two new optical structures are designed using the Simultaneous Multiple Surfaces (SMS) method, comprised of 2 reflecting surfaces and 2 refracting surfaces, 800mm focal length, f/8 (aperture diameter 100 mm) and 1.180 diagonal field of view in the SWIR band. The lens surfaces are rotational symmetric and calculated to have good control of non-paraxial rays. We have achieved designs with excellent performance, and with total system length of less than 60 mm.

A User Centered Design Approach for Patient Interfaces to a Diabetes IT Platform

Improving patient self-management can have a greater impact than improving any clinical treatment (WHO). We propose here a systematic and comprehensive user centered design approach for delivering a technological platform for diabetes disease management. The system was developed under the METABO research project framework, involving patients from 3 different clinical centers in Parma, Modena and Madrid.

Freeform Fresnel RXI-RR Köhler design with spectrum-splitting for photovoltaics

The development of a novel optical design for the high concentration photovoltaics (HPCV) nonimaging concentrator (>500x) that utilizes a built-in spectrum splitting concept is presented. The primary optical element (POE) is a flat Fresnel lens and the secondary optical element (SOE) is a free-form RXI-type concentrator with a band-pass filter embedded in it. The POE and SOE perform Köhler integration to produce light homogenization on the receiver. The system uses a combination of a commercial concentration GaInP/GaInAs/Ge 3J cell and a concentration Back-PointContact (BPC) silicon cell for efficient spectral utilization, and an external confinement technique for recovering the 3J cell’s reflection. A design target of an “equivalent” cell efficiency ~46% is predicted using commercial 39% 3J and 26% Si cells. A projected CPV module efficiency of greater than 38% is achievable at a concentration level greater than 500X with a wide acceptance angle of ±1º. A first proof-of concept receiver prototype has been manufactured using a simpler optical architecture (with a lower concentration, ~100x and lower simulated added efficiency), and experimental measurements have shown up to 39.8% 4J receiver efficiency using a 3J cell with a peak efficiency of 36.9%

Advances in the SMS design method for imaging optics

In this work, two SMS algorithms are presented for an objective design with different selected ray-bundles: three meridian ray-bundles (3M) and one meridian and two skew ray-bundles (1M-2S), the latter from pin hole point of view, provides a better sampling of the phase space. Results obtained with different algorithms will be compared.

Integrated learning of computer applications for production engineering

A high productivity rate in Engineering is related to an efficient management of the flow of the large quantities of information and associated decision making activities that are consubstantial to the Engineering processes both in design and production contexts. Dealing with such problems from an integrated point of view and mimicking real scenarios is not given much attention in Engineering degrees. In the context of Engineering Education, there are a number of courses designed for developing specific competencies, as required by the academic curricula, but not that many in which integration competencies are the main target. In this paper, a course devoted to that aim is discussed. The course is taught in a Marine Engineering degree but the philosophy could be used in any Engineering field. All the lessons are given in a computer room in which every student can use each all the treated software applications. The first part of the course is dedicated to Project Management: the students acquire skills in defining, using Ms-PROJECT, the work breakdown structure (WBS), and the organization breakdown structure (OBS) in Engineering projects, through a series of examples of increasing complexity, ending up with the case of vessel construction. The second part of the course is dedicated to the use of a database manager, Ms-ACCESS, for managing production related information. A series of increasing complexity examples is treated ending up with the management of the pipe database of a real vessel. This database consists of a few thousand of pipes, for which a production timing frame is defined, which connects this part of the course with the first one. Finally, the third part of the course is devoted to the work with FORAN, an Engineering Production package of widespread use in the shipbuilding industry. With this package, the frames and plates where all the outfitting will be carried out are defined through cooperative work by the studens, working simultaneously in the same 3D model. In the paper, specific details about the learning process are given. Surveys have been posed to the students in order to get feed-back from their experience as well as to assess their satisfaction with the learning process. Results from these surveys are discussed in the paper

Progress in the SMS design method for imaging optics

In this work, two SMS algorithms are presented for an objective design with different selected ray-bundles: three meridian ray-bundles (3M) and one meridian and two skew ray-bundles (1M-2S), the latter from pin hole point of view, provides a better sampling of the phase space. Results obtained with different algorithms will be compared

Overview of the SMS design method applied to imaging optics

The Simultaneous Multiple Surfaces (SMS) was developed as a design method in Nonimaging Optics during the 90s. Later, the method was extended for designing Imaging Optics. We present an overview of the method applied to imaging optics in planar (2D) geometry and compare the results with more classical designs based on achieving aplanatism of different orders. These classical designs are also viewed as particular cases of SMS designs. Systems with up to 4 aspheric surfaces are shown. The SMS design strategy is shown to perform always better than the classical design (in terms of image quality). Moreover, the SMS method is a direct method, i.e., it is not based in multi-parametric optimization techniques. This gives the SMS method an additional interest since it can be used for exploring solutions where the multiparameter techniques can get lost because of the multiple local minima

Development of an adequate model for verification of design safety-margins of the HTTR nuclear test facility

This work is based on the prototype High Engineering Test Reactor (HTTR) of the Japan Agency of Energy Atomic (JAEA). Its objective is to describe an adequate deterministic model to be used in the assessment of its design safety margins via damage domains. The concept of damage domain is defined and it is shown its relevance in the ongoing effort to apply dynamic risk assessment methods and tools based on the Theory of Stimulated Dynamics (TSD). To illustrate, we present results of an abnormal control rod (CR) withdrawal during subcritical condition and its comparison with results obtained by JAEA. No attempt is made yet to actually assess the detailed scenarios, rather to show how the approach may handle events of its kind

Structural behaviour and design criteria of under-deck cable-stayed bridges subjected to seismic action

Under-deck cable-stayed bridges are very effective structural systems for which the strong contribution of the stay cables under live loading allows for the design of very slender decks for persistent and transient loading scenarios. Their behaviour when subjected to seismic excitation is investigated herein and a set of design criteria are presented that relate to the type and arrangement of bearings, the number and configuration of struts, and the transverse distribution of stay cables. The nonlinear behaviour of these bridges when subject to both near-field and far-field accelerograms has been thoroughly investigated through the use of incremental dynamic analyses. An intensity measure that reflects the pertinent contributions to response when several vibration modes are activated was proposed and is shown to be effective for the analysis of this structural type. The under-deck cable-stay system contributes in a very positive manner to reducing the response when the bridges are subject to very strong seismic excitation. For such scenarios, the reduction in the stiffness of the deck because of crack formation, when prestressed concrete decks are used, mobilises the cable system and enhances the overall performance of the system. Sets of natural accelerograms that are compliant with the prescriptions of Eurocode 8 were also applied to propose a set of design criteria for this bridge type in areas prone to earthquakes. Particular attention is given to outlining the optimal strategies for the deployment of bearings

Neutronics design and radiological aspects of HiPER facilities

En este trabajo se han cubierto diferentes asuntos del diseño neutrónico de los aspectos radiológicos de las dos instalaciones del proyecto HiPER. El proyecto HiPER es un proyecto europeo concebido en el marco del programa ESFRI (European Scientific Facilities Research Infrastructure). Está destinado al desarrollo de la energía de fusión nuclear inercial mediante el uso de láseres y el esquema iluminación directa. Consecuentemente, se trata de una instalación con fines exclusivamente civiles. Se divide en dos fases, correspondientes con dos instalaciones: HiPER Engineering y HiPER Reactor. La instalación HiPER Engineering desarrollará las tecnologías implicadas en la ignición de alta repetición de cápsulas de DT por iluminación directa. El HiPER Reactor será una planta demostradora que produzca electricidad haciendo uso de las tecnologías desarrolladas durante la fase HiPER Engineering. El HiPER Engineering se centrará en las tecnologías relevantes para las igniciones a alta repetición de cápsulas de DT usando la iluminación directa. El principal esfuerzo de desarrollo tecnológico se hará en todos los asuntos directamente relacionados con la ignición: láseres, óptica, inyector, y fabricación masiva de cápsulas entre otros. Se espera una producción de entre 5200 MJ/año y 120000 MJ/año dependiendo del éxito de la instalación. Comparado con la energía esperada en NIF, 1200 MJ/año, se trata de un reto y un paso más allá en la protección radiológica. En este trabajo se ha concebido una instalación preliminar. Se ha evaluado desde el punto de vista de la protección radiológica, siendo las personas y la óptica el objeto de protección de este estudio. Se ha establecido una zonificación durante la operación y durante el mantenimiento de la instalación. Además, se ha llevado a cabo una evaluación de la selección de materiales para la cámara de reacción desde el punto de vista de gestión de residuos radiactivos. El acero T91 se ha seleccionado por, siendo un acero comercial, presentar el mismo comportamiento que el acero de baja activación EUROFER97 al evaluarse como residuo con el nivel de irradiación de HiPER Engineering. Teniendo en cuenta los resultados obtenidos para la instalación preliminar y las modificaciones de la instalación motivadas en otros campos, se ha propuesto una instalación avanzada también en este trabajo. Un análisis más profundo de los aspectos radiológicos, así como una evaluación completa de la gestión de todos los residuos radiactivos generados en la instalación se ha llevado a cabo. La protección radiológica se ha incrementado respecto de la instalación preliminar, y todos los residuos pueden gestionarse en un plazo de 30 sin recurrir al enterramiento de residuos. El HiPER Reactor sera una planta demostradora que produzca electricidad basada en las tecnologías de ignición desarrolladas durante la fase HiPER Engineering. El esfuerzo de desarrollo tecnológico se llevará a cabo en los sistemas relacionados con la generación de electricidad en condiciones económicas: manto reproductor de tritio, ciclos de potencia, vida y mantenimiento de componentes, o sistemas de recuperación de tritio entre otros. En este trabajo la principal contribución a HiPER Reactor está relacionada con el diseño de la cámara de reacción y sus extensiones en la planta. La cámara de reacción es la isla nuclear más importante de la planta, donde la mayoría de las reacciones nucleares tienen lugar. Alberga la primera pared, el manto reproductor de tritio y la vasija de vacío. Todo el trabajo realizado aquí ha pivotado en torno al manto reproductor de tritio y sus interacciones con el resto de componentes de la planta. Tras una revisión profunda de la bibliografía de los diseños recientes de cámaras de reacción con características similares a HiPER Reactor, se ha propuesto y justificado un esquema tecnológico innovador para el manto reproductor de tritio. El material fértil selecconado es el eutéctico 15.7 at.% Litio – 84.3 at.% Plomo, LiPb, evitando el uso de berilio como multiplicador neutrónico mientras se garantiza el ajuste online de la tasa de reproducción de tritio mediante el ajuste en el enriquecimiento en 6Li. Aunque se podría haber elegido Litio purom el LiPb evita problemas relacionados con la reactividad química. El precio a pagar es un reto materializado como inventario radiactivo de Z alto en el lazo de LiPb que debe controlarse. El material estructural seleccionado es el acero de baja activación EUROFER97, que estará en contacto directo con le LiPb fluyendo a alta velocidad. En este esquema tecnológico, el LiPb asegurará la autosuficiente de tritio de la planta mientras el propio LiPb extrae del manto el calor sobre él depositado por los neutrones. Este esquema recibe el nombre de manto de Litio-Plomo auto-refrigerado (SCLL por sus siglas en inglés). Respecto de los conceptos SCLL previos, es destacable que nos e requieren componentes del SiC, puesto que no hay campos magnéticos en la cámara de reacción. Consecuentemente, el manto SCLL propuesto para HiPER presenta riesgo tecnológicos moderados, similares a otros dispositivos de fusión magnética, como el HCLL, e incluso inferiores a los del DCLL, puesto que no se require SiC. Los retos que se deben afrontar son el control del inventario de Z alto así como las tasas de corrosión derivadas de la interacción del LiPb con el EUROFE97. En este trabajo se abordan ambos aspectos, y se presentan los respectivos análisis, junto con otros aspectos neutrónicos y de activación, tales como la protección de la vasija de vacío por parte del material fértil para garantizar la resoldabilidad de por vida en la cara externa de la vasija. También se propone y se estudio un ciclo de potencia de Brayton de Helio para dos configuraciones diferentes de refrigeración del sistema primera pared-manto reproductor. Las principales conclusiones de estos estudios son: i) el inventario de Z alto puede controlarse y es comparable al que se encuentra en dispositivos de fusión similares, ii)la vasija de vacío requiere una mayor protección frente a la radiación neutrónica y iii) las tasas de corrosión son demasiado altas y la temperatura media de salida del LiPb es demasiado baja. Tiendo en cuenta estos resultados juntos con otras consideraciones relacionadas con el mantenimiento de componentes y la viabilidad constructiva, se ha propuesto una evolución de la cámara de reacción. Las evoluciones más destacables son la introducción de un reflector neutrónico de grafito, la modificación de la configuración de la óptica final, la forma y el tamaño de la cámara de vacío y una nueva subdivisión modular del manto. Se ha evaluado desde el punto de vista neutrónico, y su análisis y posterior evolución queda fuera del objeto de este trabajo. Los códigos utilizados en este trabajo son: CATIA para la generación de geometrías 3D complejas MCAM para la traducción de archivos de CATIA a formato de input de MCNP MCNP para el transporte de la radiación (neutrones y gammas) y sus respuestas asociadas ACAB para la evolución del inventario isotópico y sus respuestas asociadas MC2ACAB para acoplar MCNP y ACAB para el cómputo de dosis en parada usando la metodología R2S basada en celda. Moritz para visualizar los reultados de MCNP FLUENT para llevar a cabo cálculos de fluido-dinámica Para llevar a cabo este trabajo, han sido necesarias unas destrezas computacionales. Las más relevantes utilizadas son: generación de geometrás 3D complejas y transmisión a MCNP, diferentes tñecnica de reducción de varianza como importancia por celdas y weight windows basado en malla, metodología Rigorous-two-Steps basada en celdas para el cálculo de dosis en parada y la modificación del código ACAB para el cálculos con múltiples espectros en la misma simulación. Como resumen, la contribución de este trabajo al proyecto HiPER son dos diseños conceptuales de instalación: una para HiPER Engineering y otra para HiPER Reactor. La primera se ha estudio en profundidad desde el punto de vista de protección radiológica y gestión de residuos, mientras que la segunda se ha estudiado desde el punto de vista de operación: seguridad, comportamiento, vida y mantenimiento de componentes y eficiencia del ciclo de potencia.

Analysis and design of multiagent systems using MAS-CommonKADS

This article proposes an agent-oriented methodology called MAS-CommonKADS and develops a case study. This methodology extends the knowledge engineering methodology CommonKADSwith techniquesfrom objectoriented and protocol engineering methodologies. The methodology consists of the development of seven models: Agent Model, that describes the characteristics of each agent; Task Model, that describes the tasks that the agents carry out; Expertise Model, that describes the knowledge needed by the agents to achieve their goals; Organisation Model, that describes the structural relationships between agents (software agents and/or human agents); Coordination Model, that describes the dynamic relationships between software agents; Communication Model, that describes the dynamic relationships between human agents and their respective personal assistant software agents; and Design Model, that refines the previous models and determines the most suitable agent architecture for each agent, and the requirements of the agent network.

Engineering Agent Systems for Decision Support

This paper discusses how agent technology can be applied to the design of advanced Information Systems for Decision Support. In particular, it describes the different steps and models that are necessary to engineer Decision Support Systems based on a multiagent architecture. The approach is illustrated by a case study in the traffic management domain.

Final year project: students and instructors perceptions as a competence-strengthening tool for engineering students

This work indicates the importance of the Final Year Project (FYP) in the strengthening of competences of engineering students. The study also shows which personal competences of students are reinforced most during the FYP process,including the preparation, elaboration, presentation and defence stages. In order to gather information on this subject, a survey was conducted at two different Spanish technical universities—one public and one private—and a comparative analysis was performed of the questionnaires collected. The competence model considered is that used by the Accreditation Board for Engineering and Technology (ABET), since the official title of the public university has been accredited by this model. The results indicate which personal and professional competences of students are reinforced well by undertaking the FYP. Any significant differences in response by university are explained in the study. For validation purposes, the results were contrasted with the instructor’s perspective using the triangulation methodology. Finally, the conclusions drawn will permit the design of new study plans to cope more effectively with the challenges of the FYP in the new Bologna framework.