Diversity of the ichthyofauna in the Serra do Mar State Park- Núcleo Santa Virgínia, Sáo Paulo State, Brazil

The aim of this work was to assess and compare the diversity of the ichthyofauna in three headwater rivers of Paraíba-do-Sul basin in the Serra do Mar State Park, Núcleo Santa Virgínia. A total of 1,774 specimens of 16 species of fishes belonging to 6 families were caught. Characiforms were the most abundant fish at all three sites, followed by Cyprinodontiformes, Siluriformes, and Perciformes. The Shannon index (H′), evenness (E), and the Jaccard and Morisita-Horn similarity indexes were low, indicating both low diversity and low similarity of species among the three streams. The values of these indexes should be evaluated according to the biotic and abiotic conditions in each environment. It is clear that in mountain streams of the Atlantic Forest, these low values occur because of the presence of a few abundant and many rare species.

Effects of atrazine on female Wistar rats: Morphological alterations in ovarian follicles and immunocytochemical labeling of 90 kDa heat shock protein

Fertility in female mammals may be affected by a variety of endocrine disrupters present in the environment. Herbicide atrazine is an example of endocrine disrupter employed in agriculture, which disrupts estrous cyclicity in rats. Aiming to characterize morphologically the effect of low and sublethal doses of atrazine on the ovaries of Wistar rats, in an effort to determine the possible intrafollicular target site through which this herbicide acts adult females were submitted to both subacute and subchronic treatments. Additionally, immunocytochemical labeling of 90 kDa heat shock protein (HSP90) was performed in order to evaluate the role played by this protein in the ovary, under stressed conditions induced by herbicide exposure. The results indicated that atrazine induced impaired folliculogenesis, increased follicular atresia and HSP90 depletion in female rats submitted to subacute treatment, while the subchronic treatment with low dose of atrazine could compromise the reproductive capacity reflected by the presence of multioocytic follicle and stress-inducible HSP90. © 2007 Elsevier Ltd. All rights reserved.

Effects of the biodegradation on biodegradable polymer blends and polypropylene

The large use of plastics in the world generates a large amount of waste which persists around 200 years in the environment. To minimize this effect is important to search some new polymer materials: the blends of biodegradable polymers with synthetic polymers. It is a large area that needs an Intensive research to investigate the blends properties and its behavior face to the different treatments to aim at the blodegradation. The blends used In this work are: some blodegradable polymers such as: poly(hydroxybutyrate) (PHB) and poly(s-polycaprolactone) (PCL) with a synthetic polymer, polypropylene (PP), in lower concentration. These blends were prepared using an internal mixer (Torque Rheometer), and pressed. These films were submitted to fungus biotreatment. The films analyses will be carried out by Fourier Transform Infrared (FTIR), UV-Vis absorption (UV-Vis), Scanning Electronic Microscopy (SEM), DSC and TGA. © 2008 American Institute of Physics.

Transmission network expansion planning considering uncertainty in generation and demand

This paper presents a mathematical model and a methodology to solve a transmission network expansion planning problem considering uncertainty in demand and generation. The methodology used to solve the problem, finds the optimal transmission network expansion plan that allows the power system to operate adequately in an environment with uncertainty. The model presented results in an optimization problem that is solved using a specialized genetic algorithm. The results obtained for known systems from the literature show that cheaper plans can be found satisfying the uncertainty in demand and generation. ©2008 IEEE.

Importance of xenarthrans in the eco-epidemiology of Paracoccidioides brasiliensis

Background. Several pathogens that cause important zoonotic diseases have been frequently associated with armadillos and other xenarthrans. This mammal group typically has evolved on the South American continent and many of its extant species are seriously threatened with extinction. Natural infection of armadillos with Paracoccidioides brasiliensis in hyperendemic areas has provided a valuable opportunity for understanding the role of this mammal in the eco-epidemiology of Paracoccidioidomycosis (PCM), one of the most important systemic mycoses in Latin America. Findings. This study aimed to detect P. brasiliensis in different xenarthran species (Dasypus novemcinctus, Cabassous spp., Euphractus sexcinctus, Tamandua tetradactyla and Myrmecophaga tridactyla), by molecular and mycological approaches, in samples obtained by one of the following strategies: i) from road-killed animals (n = 6); ii) from naturally dead animals (n = 8); iii) from animals that died in captivity (n = 9); and iv) from living animals captured from the wild (n = 2). Specific P. brasiliensis DNA was detected in several organs among 7/20 nine-banded armadillos (D. novemcinctus) and in 2/2 anteaters (M. tridactyla). The fungus was also cultured in tissue samples from one of two armadillos captured from the wild. Conclusion. Members of the Xenarthra Order, especially armadillos, have some characteristics, including a weak cellular immune response and low body temperature, which make them suitable models for studying host-pathogen interaction. P. brasiliensis infection in wild animals, from PCM endemic areas, may be more common than initially postulated and reinforces the use of these animals as sentinels for the pathogen in the environment. © 2009 Bagagli et al; licensee BioMed Central Ltd.

Algebraic approach to optimal clone selection applied in metagenomic projects

Due to the wide diversity of unknown organisms in the environment, 99% of them cannot be grown in traditional culture medium in laboratories. Therefore, metagenomics projects are proposed to study microbial communities present in the environment, from molecular techniques, especially the sequencing. Thereby, for the coming years it is expected an accumulation of sequences produced by these projects. Thus, the sequences produced by genomics and metagenomics projects present several challenges for the treatment, storing and analysis such as: the search for clones containing genes of interest. This work presents the OCI Metagenomics, which allows defines and manages dynamically the rules of clone selection in metagenomic libraries, thought an algebraic approach based on process algebra. Furthermore, a web interface was developed to allow researchers to easily create and execute their own rules to select clones in genomic sequence database. This software has been tested in metagenomic cosmid library and it was able to select clones containing genes of interest. Copyright 2010 ACM.

Serological survey of Toxoplasma gondii in captive Neotropical felids from Southern Brazil

Toxoplasma gondii is the causative intracellular protozoan of toxoplasmosis in human being and animals. Members of the Felidae family are considered the single definitive host for the infection; both wild and domestic cats are able to excrete oocysts in the environment. Wild cats maintained in captivity may serve as source of infection for other clinically susceptible animals in the same environment. The aim of this study was to determine the frequency of T. gondii IgG antibodies in 57 neotropical felids (1 Leopardus geoffroyi; 3 Puma yagouaroundi; 17 Leopardus wiedii; 22 Leopardus tigrinus; and 14 Leopardus pardalis) kept at the Bela Vista Biological Sanctuary, Itaipu Binacional, Southern Brazil, by the modified agglutination test (MAT) using titer 16 as cut-off point. Seropositivity was observed in 38/57 (66.67%; 95% CI 53.66-77.51%) samples, with higher frequency in ocelots (71.43%). Wild-caught felids were three times more likely to be infected when compared to zoo-born animals (P≤ 0.05) and age of wild-caught animals (P= 0.6892; 95% CI. = 0.7528-1.66) was not significant as a risk factor for the infection, the same occurring with zoo-born animals (P= 0.05; 95% CI. = 0.6267-24.052). These results suggest that, despite efforts to control T. gondii infection in zoo facilities, such as individual pens, hygiene monitoring, veterinary care and pre-frozen meat offered as food, non-domestic felids kept in captivity, particularly the wild-caught specimens, may be invariably exposed to infection due to other environmental sources. © 2010 Elsevier B.V.

Effect of nozzle angle and air-jet parameters in air-assisted sprayer on biological effect of soybean asian rust chemical protection

Aiming at improving the efficiency control of Phakopsora pachyrhizi, this research evaluated different application techniques, using spray deposits and yield parameters of soybean crop. Two experiments were carried out in the experimental area of FCA/UNESP - Botucatu, SP, Brazil, in the soybean crop, Conquista variety, in the 2006/2007 season. The first experiment was arranged in random blocks with eight treatments and four replications. The treatments were conducted in factorial arrangement 4×2 (four air levels 0, 9, 11 and 29 km/h combined at two nozzle angles 0 and 30°) using AXI 110015 nozzles. Ten plants on each plot were selected for sampling spray deposits. Artificial targets were fixed on plants, two in the top and another two in the bottom part of plants (abaxial and adaxial leaf surface each one). For deposit evaluations, a cupric tracer was used and the amount of deposits was determined by a spectrophotometer. The second experiment was carried out in the same place and the treatments were of the same arrangement as the previous experiment, including control treatment (untreated plants). The spraying with triazole fungicide was realized in R2 and R5.2 growth stages of soybean with 142 l/ha spray volume. The nozzle angled of 30° combined with maximum air speed promoted the highest spray deposits on the soybean crop and influenced positively the control of the soybean Asian rust as well in the productivity of this crop.

Reproductive technology in domestic carnivorous

Background: The delay in development of artificial reproduction techniques on carnivorous could be due to countless reasons, but the lack of commercial interest is probably the most important one. The majority of canines are small structures, canidae are extremely fertile and a great number of species are adapted to domestication or captivity. Finally, the canine gamete physiology presents a difficult adaptation of technology knowledge obtained from other species. Furthermore, domestic felines are animals of company and there is no interest in reproducing them in a large scale, as it has been observed in other domestic animals, however, besides of being a valuable model for the development of in vitro techniques, the domestic cat is also used as an embryo receptor for different species of small wild felines due to physiological similarities among them, in vitro embrionary development, Review: It was reviewed the main insights about the reproductive physiology in female dogs, in vitro oocytary maturation (IVM), pregnancy and conception rate with dogs' frozen/unfrozen semen and PIV in domestic cats. The majority of mammal oocytes restart meiosis spontaneously after ovulation and reaches MII in artificial environment; in an in vitro maturation system in bovines, around 90% of oocytes complete their maturation, although its development capacity can be reduced subsequently. The success of IVM in canidae have been limited, with maturation rate varying from 0 to 58%, usually around 20%. The greatest difficulties include oocyte quality, hormonal environment, protein supplementation, cumulus / oocyte cell interaction, donor breed and age, culture systems, oxygen tension, amino acids, growth factor and sequential means. The freezing process reduces the quality of the semen, firstly because it reduces the number of living sperms and secondly because freezing produces cell modifications that could alter the sperm motility, longevity, integrity of membranes and its fertilizing capacity. Conclusion: Nowadays, several researches are being performed with the aim of increasing viability after dogs' and cats' semen is unfrozen, using extenders, cryoprotectors, freezing and unfreezing curves, addition of antioxidant substances. The aim of this text is to inform about the improvements obtained on the artificial reproduction techniques, emphasizing the oocytary maturation in female dogs, semen cryopreservation and artificial insemination in domestic dogs and cats.

Tax reforms and fiscal stabilization in Latin American countries

Includes bibliography

Employment, growth and reforms in Jamaica

Includes bibliography

Mutual occlusion between real and virtual elements in Augmented Reality based on fiducial markers

Augmented Reality (AR) systems which use optical tracking with fiducial marker for registration have had an important role in popularizing this technology, since only a personal computer with a conventional webcam is required. However, in most these applications, the virtual elements are shown only in the foreground a real element does not occlude a virtual one. The method presented enables AR environments based on fiducial markers to support mutual occlusion between a real element and many virtual ones, according to the elements position (depth) in the environment. © 2012 IEEE.

Development of an instrumentation system embedded on FPGA for real time measurement of mechanical vibrations in rotating machinery

The real-time monitoring of events in an industrial plant is vital, to monitor the actual conditions of operation of the machinery responsible for the manufacturing process. A predictive maintenance program includes condition monitoring of the rotating machinery, to anticipate possible conditions of failure. To increase the operational reliability it is thus necessary an efficient tool to analyze and monitor the equipments, in real-time, and enabling the detection of e.g. incipient faults in bearings. To fulfill these requirements some innovations have become frequent, namely the inclusion of vibration sensors or stator current sensors. These innovations enable the development of new design methodologies that take into account the ease of future modifications, upgrades, and replacement of the monitored machine, as well as expansion of the monitoring system. This paper presents the development, implementation and testing of an instrument for vibration monitoring, as a possible solution to embed in industrial environment. The digital control system is based on an FPGA, and its configuration with an open hardware design tool is described. Special focus is given to the area of fault detection in rolling bearings. © 2012 IEEE.

Improvement and evaluation of the MS2SV for mixed systems design described in abstraction high level

This paper presents an important improvement of the MS2SV tool. The MS2SV performs the translation of mixed systems developed in MATLAB / Simulink for a structural or behavioral description in VHDL-AMS. Previously, the MS2SV translated only models of the LIB MS2SV library. This improvement allows designer to create your own library to translation. As case study was used a rudder controller employed in an unmanned aerial vehicle. For comparison with the original model the VHDL-AMS code obtained by the translation was simulated in SystemVision environment. The results proved the efficiency of the tool using the translation improvement proposed in this paper.

Efficiency analysis of an isolated high voltage gain converter operating in resonant and non-resonant mode

This paper presents an efficiency investigation of an isolated high step-up ratio dc-dc converter aimed to be used for energy processing from low-voltage high-current energy sources, like batteries, photovoltaic modules or fuel-cells. The considered converter consists of an interleaved active clamp flyback topology combined with a voltage multiplier at the transformer secondary side capable of two different operating modes, i.e. resonant and non-resonant according to the design of the output capacitors. The main goal of this paper is to compare these two operating modes from the component losses point of view with the aim of maximize the overall converter efficiency. The approach is based on losses prediction using steady-state theoretical models (designed in Mathcad environment), taking into account both conduction and switching losses. The models are compared with steady-state simulations and experimental results considering different operating modes to validate the approach. © 2012 IEEE.