Distribution of small Rho GTPases in the developing rat submandibular gland

During the rat submandibular gland (SMG) development, organogenesis and cytodifferentiation depend on the actin cytoskeleton, which is regulated by small Rho GTPases. These proteins link cell surface receptors to pathways that regulate cell motility, polarity, gene expression, vesicular trafficking, proliferation and apoptosis. The aim of this study was to evaluate, by immunohistochemistry, the distribution pattern of RhoA, RhoB, RhoC, Rac1 and Cdc42 during cytodifferentiation of the rat SMG and in male adults. All GTPases were found in epithelial and mesenchymal tissues throughout gland development. Rac1 appeared to be important for parenchyma expansion at the beginning of cytodifferentiation, while RhoC, Cdc42 and the inactive phosphorylated form of Rac1 seemed associated with lumen formation and cell polarization in terminal tubules. RhoA and RhoB labeling was evident throughout development. All GTPases were differentially expressed in the adult gland, suggesting that they play specific roles during differentiation and function of the rat SMG.

Tissue distribution of quiescin Q6/sulfhydryl oxidase (QSOX) in developing mouse

Quiescin Q6/sulfhydryl oxidases (QSOX) are revisited thiol oxidases considered to be involved in the oxidative protein folding, cell cycle control and extracellular matrix remodeling. They contain thioredoxin domains and introduce disulfide bonds into proteins and peptides, with the concomitant hydrogen peroxide formation, likely altering the redox environment. Since it is known that several developmental processes are regulated by the redox state, here we assessed if QSOX could have a role during mouse fetal development. For this purpose, an anti-recombinant mouse QSOX antibody was produced and characterized. In E-13.5, E-16.5 fetal tissues, QSOX immunostaining was confined to mesoderm- and ectoderm-derived tissues, while in P1 neonatal tissues it was slightly extended to some endoderm-derived tissues. QSOX expression, particularly by epithelial tissues, seemed to be developmentally-regulated, increasing with tissue maturation. QSOX was observed in loose connective tissues in all stages analyzed, intra and possibly extracellularly, in agreement with its putative role in oxidative folding and extracellular matrix remodeling. In conclusion, QSOX is expressed in several tissues during mouse development, but preferentially in those derived from mesoderm and ectoderm, suggesting it could be of relevance during developmental processes.

Notch signaling controls the balance of ciliated and secretory cell fates in developing airways

Although there is accumulated evidence of a role for Notch in the developing lung, it is still unclear how disruption of Notch signaling affects lung progenitor cell fate and differentiation events in the airway epithelium. To address this issue, we inactivated Notch signaling conditionally in the endoderm using a Shh-Cre deleter mouse line and mice carrying floxed alleles of the Pofut1 gene, which encodes an O-fucosyltransferase essential for Notch-ligand binding. We also took the same conditional approach to inactivate expression of Rbpjk, which encodes the transcriptional effector of canonical Notch signaling. Strikingly, these mutants showed an almost identical lung phenotype characterized by an absence of secretory Clara cells without evidence of cell death, and showed airways populated essentially by ciliated cells, with an increase in neuroendocrine cells. This phenotype could be further replicated in cultured wild-type lungs by disrupting Notch signaling with a gamma-secretase inhibitor. Our data suggest that Notch acts when commitment to a ciliated or non-ciliated cell fate occurs in proximal progenitors, silencing the ciliated program in the cells that will continue to expand and differentiate into secretory cells. This mechanism may be crucial to define the balance of differentiated cell profiles in different generations of the developing airways. It might also be relevant to mediate the metaplastic changes in the respiratory epithelium that occur in pathological conditions, such as asthma and chronic obstructive pulmonary disease.

Developing a fluorimetric sequential injection methodology to study adsorption/desorption of glyphosate on soil and sediment samples

This paper describes the development of a sequential injection method to automate the fluorimetric determination of glyphosate based on a first step of oxidation to glycine by hypochlorite at 48 degrees C, followed by reaction with the fluorogenic reagent o-phthaldialdehyde in presence of 2-mercaptoethanol in borate buffer (pH > 9) to produce a fluorescent 1-(2`-hydroxyethylthio)-2-N-alkylisoindole. The proposed method has a linear response for glyphosate concentrations between 0.25 and 25.0 mu mol L(-1), with limits of detection and quantification of 0.08 and 0.25 mu mol L(-1), respectively. The sampling rate of the method is 18 samples per hour, consuming only a fraction of reagents consumed by the chromatographic method based on the same chemistry. The method was applied to study adsorption/desorption properties in a soil and in a sediment sample. Adsorption and desorption isotherms were properly fitted by Freundlich and Langmuir equations, leading to adsorption capacities of 1384 +/- 26 and 295 +/- 30 mg kg(-1) for the soil and sediment samples, respectively. These values are consistent with the literature, with the larger adsorption capacity of the soil being explained by its larger content of clay minerals, while the sediment was predominantly sandy. (C) 2011 Elsevier B.V. All rights reserved.

Simple telemedicine for developing regions: Camera phones and paper-based microfluidic devices for real-time, off-site diagnosis

This article describes a prototype system for quantifying bioassays and for exchanging the results of the assays digitally with physicians located off-site. The system uses paper-based microfluidic devices for running multiple assays simultaneously, camera phones or portable scanners for digitizing the intensity of color associated with each colorimetric assay, and established communications infrastructure for transferring the digital information from the assay site to an off-site laboratory for analysis by a trained medical professional; the diagnosis then can be returned directly to the healthcare provider in the field. The microfluidic devices were fabricated in paper using photolithography and were functionalized with reagents for colorimetric assays. The results of the assays were quantified by comparing the intensities of the color developed in each assay with those of calibration curves. An example of this system quantified clinically relevant concentrations of glucose and protein in artificial urine. The combination of patterned paper, a portable method for obtaining digital images, and a method for exchanging results of the assays with off-site diagnosticians offers new opportunities for inexpensive monitoring of health, especially in situations that require physicians to travel to patients (e.g., in the developing world, in emergency management, and during field operations by the military) to obtain diagnostic information that might be obtained more effectively by less valuable personnel.

Diagnostics for the Developing World: Microfluidic Paper-Based Analytical Devices

Microfluidic paper-based analytical devices (mu PADs) are a new class of point-of-care diagnostic devices that are inexpensive, easy to use, and designed specifically for use in developing countries. (To listen to a podcast about this feature, please go to the Analytical Chemistry multimedia page at pubs.acs.org/page/ancham/audio/index.html.)

Can't Get No Satisfaction: Lessons Learned while Developing an Assessment of Faculty Awareness and Attitudes towards Library Services

The presentation was offered as part of the CUNY Library Assessment Conference, Reinventing Libraries: Reinventing Assessment, held at the City University of New York in June 2014.

Developing and Facilitating a Successful Hybrid Statistics Course

This presentation will outline an effective model for a Hybrid Statistics course. The course continues to be very successful, incorporating on-line instruction, testing, blogs, and above all, a data analysis project driven trajectory motivating students to engage more aggressively in the class and rise up to the challenge of writing an original research paper. Obstacles, benefits and successes of this endeavor will be addressed.

The Relationship between Transport Infrastructure and EconomicGrowth: An Empirical Analysis Comparing Developing and DevelopedCountries

Gross domestic product (GDP) is generally considered as the most important index and comprehensive measure of the size of economy. This paper investigates empirically the relationship between transport infrastructure (focus on highways) and GDP growth based on a production function approach. The physical stocks of transport infrastructure were used instead of monetary data to measure public capital together with several other variables (labor and private capital) that were hypothesized to affect economic growth. Then we explore a number of subsequent studies that use panel data covering the period between 1992 and 2004. An investigation was done to compare developed countries and developing countries. Results indicate that physical units are positively and significantly related to economic growth. Furthermore there was an interesting finding that the output elasticity with respect to physical units for developed countries is higher than developing countries.

Developing a Communication link between Agents and cross Platform IDE

The main objective of this thesis work is to develop communication link between Runrev Revolution (IDE) and JADE (Multi-Agent System) through Socket programming using TCP/IP layer. These two independent platforms are connected using socket programming technique. Socket programming is considered to be newly emerging technology among these two platforms, the work done in this thesis work is considered to be a prototype.A Graphical simulation model is developed by salixphere (Company in Hedemora) to simulate logistic problems using Runrev Revolution (IDE). The simulation software/program is called “BIOSIM”. The logistic problems are complex, and conventional optimization techniques are unlikely very successful. “BIOSIM” can demonstrate the graphical representation of logistic problems depending upon the problem domains. As this simulation model is developed in revolution programming language (Transcript) which is dynamically typed and English-like language, it is quite slow compared to other high level programming languages. The object of this thesis work is to add intelligent behaviour in graphical objects and develop communication link between Runrev revolution (IDE) and JADE (Multi-Agent System) using TCP/IP layers.The test shows the intelligent behaviour in the graphical objects and successful communication between Runrev Revolution (IDE) and JADE (Multi-Agent System).

Developing Optical Character Recoginition for Ethiopic Scripts

The Amharic language is the Official language of over 70 million people mainly in Ethiopia. An extensive literature survey and the government report reveal no single Amharic character recognition is found in the country. The Amharic script has 33 basic characters each with seven orders giving 310 distinct characters, including numbers and punctuation symbols. The characters are visually similar; there is a typeface, but no capitalization. Beside this there is no any standard font to use the language in the computer but they use different fonts developed by different stakeholders without keeping a standard on their own way and interest and this create a problem of incompatibility between different fonts and documents.This project is to investigate the reason why Amharic optical character recognition is not addressed by local and international researchers and developers and finally to develop Amharic optical character recognition uses the features and facilities of Microsoft windows Vista or 7 using Unicode standard.

Developing Box-Pushing Behaviours Using Evolutionary Robotics

The context of this report and the IRIDIA laboratory are described in the preface. Evolutionary Robotics and the box-pushing task are presented in the introduction.The building of a test system supporting Evolutionary Robotics experiments is then detailed. This system is made of a robot simulator and a Genetic Algorithm. It is used to explore the possibility of evolving box-pushing behaviours. The bootstrapping problem is explained, and a novel approach for dealing with it is proposed, with results presented.Finally, ideas for extending this approach are presented in the conclusion.