990 resultados para crescimento radicular
Resumo:
Foi utilizada uma análise de segregação com o uso da inferência Bayesiana para estimar componentes de variância e verificar a presença de genes de efeito principal (GEP) influenciando duas características de carcaça: gordura intramuscular (GIM), em %, e espessura de toucinho (ET), em mm; e uma de crescimento, ganho de peso (g/dia) dos 25 aos 90 kg de peso vivo (GP). Para este estudo, foram utilizadas informações de 1.257 animais provenientes de um delineamento de F2, obtidos do cruzamento de suínos machos Meishan e fêmeas Large White e Landrace. No melhoramento genético animal, os modelos poligênicos finitos (MPF) podem ser uma alternativa aos modelos poligênicos infinitesimais (MPI) para avaliação genética de características quantitativas usando pedigrees complexos. MPI, MPF e MPI combinado com MPF foram empiricamente testados para se estimar componentes de variâncias e número de genes no MPF. Para a estimação de médias marginais a posteriori de componentes de variância e de parâmetros, foi utilizada uma metodologia Bayesiana, por meio do uso da Cadeia de Markov, algoritmos de Monte Carlo (MCMC), via Amostrador de Gibbs e Reversible Jump Sampler (Metropolis-Hastings). em função dos resultados obtidos, pode-se evidenciar quatro GEP, sendo dois para GIM e dois para ET. Para ET, o GEP explicou a maior parte da variação genética, enquanto, para GIM, o GEP reduziu significativamente a variação poligênica. Para a variação do GP, não foi possível determinar a influência do GEP. As herdabilidades estimadas ajustando-se MPI para GIM, ET e GP foram de 0,37; 0,24 e 0,37, respectivamente. Estudos futuros com base neste experimento que usem marcadores moleculares para mapear os genes de efeito principal que afetem, principalmente GIM e ET, poderão lograr êxito.
Resumo:
O conhecimento do genoma pode auxiliar na identificação de regiões cromossômicas e, eventualmente, de genes que controlam características quantitativas (QTLs) de importância econômica. em um experimento com 1.129 suínos resultantes do cruzamento entre machos da raça Meishan e fêmeas Large White e Landrace, foram analisadas as características gordura intramuscular (GIM), em %, e ganho dos 25 aos 90 kg de peso vivo (GP), em g/dia, em 298 animais F1 e 831 F2, e espessura de toucinho (ET), em mm, em 324 F1 e 805 F2. Os animais das gerações F1 e F2 foram tipificados com 29 marcadores microsatélites. Estudou-se a ligação entre os cromossomos 4, 6 e 7 com GIM, ET e GP. Análises de QTL utilizando-se metodologia Bayesiana foram aplicadas mediante três modelos genéticos: modelo poligênico infinitesimal (MPI); modelo poligênico finito (MPF), considerando-se três locos; e MPF combinado com MPI. O número de QTLs, suas respectivas posições nos três cromossomos e o efeito fenotípico foram estimados simultaneamente. Os sumários dos parâmetros estimados foram baseados nas distribuições marginais a posteriori, obtidas por meio do uso da Cadeia de Markov, algoritmos de Monte Carlo (MCMC). Foi possível evidenciar dois QTLs relacionados a GIM nos cromossomos 4 e 6 e dois a ET nos cromossomos 4 e 7. Somente quando se ajustou o MPI, foram observados QTLs no cromossomo 4 para ET e GIM. Não foi possível detectar QTLs para a característica GP com a aplicação dessa metodologia, o que pode ter resultado do uso de marcadores não informativos ou da ausência de QTLs segregando nos cromossomos 4, 6 e 7 desta população. Foi evidenciada a vantagem de se analisar dados experimentais ajustando diferentes modelos genéticos; essas análises ilustram a utilidade e ampla aplicabilidade do método Bayesiano.
Resumo:
Este estudo foi conduzido para avaliar os efeitos dos níveis de lisina digestível da ração e da temperatura ambiente sobre o desempenho e as características de carcaça de frangos de corte dos 22 a 42 dias de idade. Foram utilizados 672 frangos Ross®, machos, com peso médio de 726 g, em delineamento inteiramente casualizado segundo arranjo fatorial 4 × 4, com seis repetições de sete aves. Os frangos foram mantidos nas temperaturas de 18,5; 21,1; 24,5 e 27,0ºC e foram alimentados com rações com diferentes níveis de lisina digestível (0,934; 1,009; 1,084 e 1,159%). Não houve interação temperatura ambiente × níveis de lisina da ração para as variáveis estudadas. O consumo de ração (CR) e o ganho de peso (GP) não foram influenciados pelos níveis de lisina. O consumo de ração reduziu linearmente com a temperatura ambiente e o ganho de peso aumentou até a temperatura estimada de 21,5ºC. A conversão alimentar melhorou até o nível estimado de 1,085% de lisina digestível. Os pesos de carcaça (PC), peito com osso (PPO), coxa (PCX) e sobrecoxa (PSCX) aumentaram até as temperaturas estimadas de 21,9; 21,0; 22,7 e 23,7ºC, respectivamente. Os rendimentos de carcaça (RC), coxa (RCX) e sobrecoxa (RSCX) aumentaram, enquanto o peso do peito sem osso (PPSO) e os rendimentos de peito com osso (RPO) e sem osso (RPSO) reduziram linearmente com a temperatura ambiente. O PCX e o RCX aumentaram, mas o RSCX reduziu linearmente com os níveis de lisina da ração. O PC, PPO, PSCX, RC, RPO e o RPSO não foram influenciados pelos níveis de lisina. A temperatura ambiente no intervalo de 18,5 e 27,0ºC não influenciou as exigências de lisina das aves. A condição para melhor conversão alimentar no período de 22 a 42 dias foi obtida com o nível de 1,085% de lisina digestível na ração e com a temperatura ambiente estimada de 23,3ºC.
Resumo:
O músculo estriado esquelético é formado pela associação de fibras musculares com a matriz extracelular. Esse tecido possui alta plasticidade e o conhecimento das características morfológicas, da miogênese, e da dinâmica do crescimento é importante para o entendimento da morfofisiologia bem como para a seleção de animais visando a melhoria na produção de carne. A maioria dos músculos estriados originam-se de células precursoras do mesoderma a partir dos somitos do embrião e o controle da diferenciação ocorre pela ação de fatores indutores ou inibidores. Um grupo de fatores transcricionais, pertencentes à família MyoD tem um papel central na diferenciação muscular. Coletivamente chamados de Fatores de Regulação Miogênica (MRFs), são conhecidos quatro tipos: MyoD, myf-5, miogenina e MRF4. Esses fatores ligam-se à seqüências de DNA conhecidas como Ebox (CANNTG) na região promotora de vários genes músculo-específicos, levando à expressão dos mesmos. As células embrionárias com potencial para diferenciação em células musculares (células precursoras miogênicas) expressam MyoD e Myf-5 e são denominadas de mioblastos. Essas células proliferam, saem do ciclo celular, expressam miogenina e MRF4, que regulam a fusão e a diferenciação da fibra muscular. Uma população de mioblastos que se diferencia mais tardiamente, as células miossatélites, são responsáveis pelo crescimento muscular no período pós natal, que pode ocorrer por hiperplasia e hipertrofia das fibras. As células satélites quiescentes não expressam os MRFs, porém, sob a ação de estímulos como fatores de crescimento ou citocinas, ocorre a ativação desse tipo celular que prolifera e expressa os MRFs de maneira similar ao que ocorre com as células precursoras miogênicas durante a miogênese. Os mecanismos de crescimento muscular são regulados pela expressão temporal dos (MRFs), que controlam a expressão dos genes relacionados com o crescimento muscular.
Resumo:
The experiment was carried out at Sao Manuel Experimental Farm, Agronomy College, São Paulo State University, Brazil, in a Dark-Red Latosol (loamy sand) to verify oat (Avena strigosa Schreber) rooting patterns under different plant populations (1,5 x 10(6) and 2.5 x 106 plants/ha) and row spacings (0.20 and 0.30 m.). Soil and roots were sampled 81 days after planting, at bloom stage. Cylindrical cores with 2.6 cm diameter were taken from soil depths of 0-10, 10-20, 20-40 and 40-60 cm. At the same time, plant canopies where also sampled to determine the dry weight. Soil analysis showed P to be concentrated in the upper 10 cm whereas the bases were uniform in the profile. There was a high root concentration in the 0-10 cm layer (9.9 to 13.0 cm/cm3 under the row and 10.0 to 11.5 cm/cm2 in the inter-row), which was not related to chemical characteristics of the soil. There was no effect of plant population or row spacing on oat root distribution or growth in the soil profile.
Resumo:
Skeletal muscle fibers areas, the weight of body, carcass and muscle, the gastric content and the length of intestines and caecum of Norfolk rabbit from neonate to 26th week were measured. Types of fibers and areas were studied in -70-degrees-C frozen blocks of flexor carpo radialis muscle. Some sections were stained with Haematoxylin and Eosin and others were submitted to SDH, NADH-TR and m-ATPase, followed by acid and alkali preincubations. All parameters revealed a high degree of correlation. Carcass weight/body weight ratio reached 55,1% at 10th week. From neonate to 26th week, the areas of SO, FOG and FG muscle fibers increased of x9.1, x12.4 and x22.2. While SO and FOG fibers tend to stabilize their growth at 10th week, FG fibers were active at this age. Due to early stabilization of SO and FOG fibers growth, the additional increase in muscle tissue in attributed mainly to hypertrophy of FG fibers.
Resumo:
Wheat (Triticum aestivum L.), Anahuac cultivar, were treated with six triadimenol (0,0; 12,5; 25,0; 37,5; 50,0 and 62,5 g of a.i./100 kg of seeds) and tebuconazole (0,0; 7,5; 15,0; 22,5 30,0 and 37,5 g of a.i./100 kg of seeds) dosis to reduce the subcrown internode length and then to deep the point of emission of adventitious roots. Seeds were seeded in pots with soil, with 5 cm of depth and after two weeks the seedlings number was counted and the subcrown internode length (CM) was evaluated. The CM may be represented by the equations: a) CM = 4,49 - 0,1779 x + 0,002161 x2 (r2 = 0,9247); b) CM = 4,62 - 0,29948 y + 0,006480 y3 - 0,00004622 y3 (r2 = 0,9551), where ''x'' and ''y'' represent tebuconazole and triadimenol dosis, respectively. The CM showed minimum values for triadimenol dosis equal to or higher than 37,5 g a.i./100 kg of seeds and for tebuconazole decreased continuously with the increase of the product dosis, showing values near to 1 cm for the maximum dosis. The triadimenol allowed, at suitable dosis, almost total inhibition of the wheat seedlings subcrown internode with no effects on seedling emergence and initial growth.
Resumo:
The follicular growth and oocyte maturation knowledge are very important to the development and improvement of new biotechnologies such as in vitro fertilization and somatic cell nuclear transfer. In order to the necessity of clarify the basic mechanisms related to canine oocyte maturation, this investigation focuses on the evaluation of the effect of insulin-like growth factor-i (IGF-I), added to synthetic oviductal fluid medium (SOF) on the in vitro maturation of domestic dog oocytes. Thirty-seven bitches undergoing ovariohysterectomy for castration or due to pathological conditions of the uterus were selected as oocytes' donors (n=875). The oocytes were allocated in the following groups: MO (stained in the collection's time), Control (72h in SOF) and Experimental (72h in SOF plus 100 ng IGF-I). After 72 hours of maturation the oocytes' nuclear status were assessed by Hoechst 33342 dye. The best results in terms of oocyte harvest were observed in those juvenile donors,, females in estrus, nuliparous and pure breeds. No significant differences were observed between treatments control (SOF) or experimental (IGF-I).
Resumo:
Intrauterine growth of Norfolk rabbits was studied from the 20th day of gestation until the parturition (31st day). A theoretical equation was adjusted for fetuses body weight. The exponential model was tested by stepwise regression technique after linearization. Both stage of gestation (t) and number of fetuses (n) had significant effects on the growth rate. The following equation was proposed to describe the weight of the pups: W = exp. (-12,9772).n.exp. {(0,991263-0,014007.5-0,00039.n)t} (with R2 = 0,9932). The biological coherence and the interpretation of the coefficients permitted us to conclude that similar models could be used for other multiparous species. This model can also be used with or without the presence of different factors related to fetal growth.
Resumo:
In recent work (Kroll, 1990) on dairy cattle growth using its monthly weights, a Gompertz function, first considering the autocorrelated error structure, and second, the independent error structure, was fitted. The last explained 25% more of the total variance than the former. In this work, a Gompertz function was fitted with autocorrelated error structure adding seasonality to the model. This was suggested taking into account the time series autocorrelation function. In order to estimate the six parameters, an iterative procedure was used, employing a matrix X = [G\S], where G is the usual matrix for fitting the Gompertz function, and S is a 0s, 1s, -1s matrix necessary to take into account seasonality. With this model, the adjustment was better in terms of the coefficient determination.
Resumo:
The objective of this study was to estimate genetic parameters for body weights at weaning (PD), 12 months old (P12) and adult age (PAD), culling age (TPR, days in herd), number (ND10) and kilograms (QD10) of calves weaned up to ten years of age, total number (NDT) and total kilograms (QDT) of calves weaned during herd life, and kilograms of calves weaned per year in herd (QTPR) of Canchim (5/8 Charolais + 3/8 Zebu) females from one herd. Data consisted of 3,249, 3.111, 1,138, 1,340, 1,362, 1,362, 1,340, 1,340 and 1,340 records of PD, P12, PAD, TPR, ND10, QD10, NDT, QDT and QTPR. respectively. Variance and covariance components were estimated by bivariate analyses between PD, P12 and PAD and other production traits using Bayesian inference. The models included the additive direct, permanent environmental and residual random effects and the fixed effects year and month of birth or calving, calving age and age of the animal, depending on the trait. QD10, QDT and QTPR of each female were obtained by adjusting the weaning weights of calves for year and month of birth, sex and age of cow. Average of heritability estimates were 0.38 (PD), 0.40 (P12), 0.54 (PAD), 0.22 (TPR), 0.22 (ND10), 0.24 (QD10), 0.23 (NDT), 0.23 (QDT) and 0.32 (QTPR), indicating genetic variability to obtain response by selection. Genetic correlations between TPR (-0.02, 0.26 and -0.12), ND10 (0.04, 0.10 and -0.29), QD10 (0.37, 0.39 and -0.13), NDT (-0.03, 0.14 and -0.25), QDT (0.20, 0.33 and -0.16), QTPR (0.21, 0.28 and -0.19) and body weights (PD, P12 and PAD) suggest that selection of females based on weaning and 12-month body weights will not affect productivity. However, it may be decreased by increasing female adult body weight.
Resumo:
This study aimed to: a) to compare the covariance components obtained by Restricted Maximum Likelihood (REML) and by bayesian inference (BI): b) to run genetic evaluations for weights of Canchim cattle measured at weaning (W240) and at eighteen months of age (W550), adjusted or not to 240 and 550 days of age, respectively, using the mixed model methodology with covariance components obtained by REML or by BI; and c) to compare selection decisions from genetic evaluations using observed or adjusted weights and by REML or BI. Covariance components, heritabilities and genetic correlation for W240 and W550 were estimated and the predicted breeding values were used to select 10% and 50% of the best bulls and cows, respectively. The covariance components obtained by REML were smaller than the a posteriori means obtained by Bl. Selected animals from both procedures were not the same, probably because the covariance components and genetic parameters were different. The inclusion of age of animal at weighing as a covariate in the statistical model fitted by BI did not change the selected bulls and cows.
Resumo:
Aim To evaluate, using an experimental immature tooth model, the fracture resistance of bovine incisors submitted to different reinforcement treatments with mineral trioxide aggregate (MTA).Methodology An immature tooth model was created by sectioning the coronal and apical portions of 40 bovine incisors 8 mm above and 12 mm below the cementoenamel junction. The root canals were irrigated with 1.0% sodium hypochlorite. They were enlarged both coronally and apically using number 703 carbide burs (ISO: 500-104-168-007-021) and their internal diameter was standardized to 2.1 mm. The specimens were assigned to four groups (n = 10): GI-control (without filling); GII-apical MTA plug + filling with gutta-percha and endodontic sealer; GIII-filling with MTA; GIV-apical MTA plug + filling with MTA + metallic post (Reforpost I). A polyether impression material was used to simulate the periodontal ligament. The specimens were submitted to a compressive load at a crosshead speed of 0.5 mm min(-1) in a servo-hydraulic universal testing machine (MTS 810) applied at 45 degrees to the long axis of the tooth until failure. Data were submitted to statistical analysis by the Kruskal-Wallis test at 5% significance level.Results GIV presented the highest fracture resistance (32.7N) and differed significantly from the other groups (P < 0.05). No statistically difference was found between GII (16.6N) and GIII (23.4N) (P > 0.05). GIII had a significantly higher fracture resistance than GI (P < 0.05).Conclusions the use of MTA + metallic post as an intra-radicular reinforcement treatment increased the resistance to fracture of weakened bovine teeth in an experimental immature tooth model.
Resumo:
The objective of this study was to estimate heritabilities of and genetic correlations among male body weight (BW12) and scrotal circumference (SC12) at 12 months of age, and female body weights at first (BWFC) and second (BWSC) calvings, age at first (AFC) and second (ASC) calvings, adult weight (AW), and mature weight (A) and maturation rate (k) obtained by the use of the Von Bertalanffy model. The restricted maximum likelihood method with an animal model that included the fixed effects of contemporary group and the random effects of animals, was used to estimate the variance and covariance components. The heritability estimates were equal to: 0.37 (BW12),0.30 (SC12),0.38 (A), 0.35 (k), 0.12 (AFC), 0.33 (BWFC), 0.04 (ASC), 0.39 (BWSC), and 0.38 (AW). The genetic correlations among BW12 and the female traits were: 0.19 (parameter A), 0.62 (parameter k), -0.58 (AFC), 0.69 (BWFC), -0.56 (ASC), 0.61 (BWSC), and 0.60 (AW). The genetic correlations among SC12 and the female traits were: -0.24 (A), 0.27 (k), -0.47 (AFC), 0.09 (BWFC), -0.67 (ASC), 0.07 (BWSC), and -0.17 (AW). These results indicate that male body weight and scrotal circumference and female weights (BWFC, BWSC and AW) and growth curve parameters A and k have enough additive genetic variation to respond to mass selection. Selection to increase male body weight at 12 months of age should result on favorable correlated changes in AFC, ASC and parameter k of females, but with increases in female body weights (BWFC, BWSC and AW). Selection to increase SC12 should result on desirable correlated responses in AFC, ASC and k, without any considerable change in female adult body weights.