Production of chitin-glucan complex by Pichia pastoris

Dissertation for the Degree of Master in Biotechnology

Monitoring antibiotics in the environment. Study of Quinoxaline derivatives bioactivity

Dissertação para obtenção do Grau de Doutor em Química Sustentável

Porous structures for the purification of biopharmaceuticals

This work aimed at the development of a (bio)polymeric monolithic support for biopharmaceuticals purification and/or capture. For that, it was assured that functional groups on its surface were ready to be involved in a plethora of chemical reactions for incorporation of the desired and most suitable ligand. Using cryogelation as preparation method a screening on multiple combinations of materials was performed in order to create a potentially efficient support with the minimal footprint, i.e. a monolithic support with reasonable mechanical properties, highly permeable, biocompatible, ready to use, with gravitational performance and minimal unspecific interactions towards the target molecules, but also biodegradable and produced from renewable materials. For the pre-selection all monoliths were characterized physico-chemically and morphologically; one agarose-based and two chitosan-based monoliths were then subjected to further characterizations before and after their modification with magnetic nanoparticles. These three specimens were finally tested towards adenovirus and the recovery reached 84% for the chitosan-GMA plain monolith prepared at -80°C. Monoliths based on chitosan and PVA were prepared in the presence and absence of magnetic particles, and tested for the isolation of GFP directly from crude cellular extracts. The affinity ligand A4C7 previously selected for GFP purification was synthesized on the monolith. The results indicated that the solid-phase synthesis of the ligand directly onto the monolith might require optimization and that the large pores of the monoliths are unsuitable for the purification of small proteins, such as GFP.

Smart macroporous structures for the purification of viral particles

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Prevalence and incidence of Mycobacterium tuberculosis infection in nursing students in Vitória, Espírito Santo

This prospective study evaluated the incidence of Mycobacterium tuberculosis infection among nursing students at the Federal University of Espírito Santo, using the purified protein derivative test. In parallel, we evaluated whether knowledge on tuberculosis transmission mechanisms had any impact on nursing students' attitudes in relation to the risk of tuberculosis infection. The incidence of tuberculin conversion was 10.5% per year (p=0.035, 95% CI = 3.63-17.43), whereas the expected conversion rate in the overall population in Brazil is 0.5% per year. These results indicate nursing students as a group at risk for TB infection. Among the risk factors studied only the use of NIOSH95 masks was associated with protection against infection (RR=0.2). Furthermore there was no statistical difference among students that PPD converted and those who remained negative regarding disease knowledge and the existence of adequate facilities for patient hospitalization. Our data reinforces the need for implementing special biosafety programs targeting this professional group.

The secretory immunoglobulin A response to Mycobacterium tuberculosis in a childhood population

We report on the measurement of saliva anti-Purified Protein Derivative sIgA and 38kDa antibodies from 127 children, of whom 31 were strong tuberculosis suspects and 96 were healthy contact children. The results concerning the percentage of children with antibody reactivity to PPD and 38kDa antigens showed that, of these 2 antigens, 38kDa induced higher reactivity in patients positive and negative for the Tuberculin Skin Test (28% and 16.6%, respectively) in comparison to controls positive and negative for the TST (11.7% and 7.1%, respectively). There was a statistically significant difference between patients positive and controls negative for the TST. In relation to the Purified Protein Derivative antigen, while 14.2% of patients positive for the TST showed antibody reactivity to the PPD antigen, no patients negative for the TST had reactivity to this antigen. The findings suggest that these two antigens seem be associated with a different development of the mucosal defence mechanisms mediated by sIgA against Mycobacterium tuberculosis.

Nosocomial Mycobacterium tuberculosis transmission among healthcare students in a high incidence region, in Vitória, State of Espírito Santo

This open comparative study for evaluating hypersensitivity to tuberculin among medical students (n=441), nursing students (n=178) and economics students (n=230) in Vitória, State of Espírito Santo, had the aim of assessing whether the prevalence of positive tuberculin tests among healthcare students could be used as a sentinel event for nosocomial transmission in localities with high endemicity. There was a significant change in the frequency of purified protein derivative reactivity in the nursing students (20. 3%) and medical students (18. 4%), in comparison with the economics students (6%) (p <0. 001). As expected, the medical and nursing students had more knowledge about tuberculosis than did the economics students (p <0. 001). Our data suggest that the incidence of Mycobacterium tuberculosis infection among nursing and medical students in our region, which has high endemicity of tuberculosis, does not differ from what is found in low-incidence countries. These data reinforce the need for implementing biosafety programs for this target population.

Studies towards modified chitooligosaccharides: a new approach to NAG-NAM moiety

Dissertação para obtenção do Grau de Mestre em Bioorgânica

Soft biomaterials as a substitute for the Nucleus Pulposus

One of the largest health problems faced worldwide, when evaluated by direct (clinical) as well indirect cost (absenteeism), is the degeneration of the intervertebral disc (IVD) that leads to back pain and, potentially disability and individual´s quality of life decreasing. The intervertebral disc is a mechanical and biological complex structure, formed by a tough outer layer of fibrocartilage called Annulus Fibrosus (AF),which surrounds a soft, elastic and gelatinous core called Nucleus Pulposus (NP). These two structures are completed by two upper and lower encasing layer called Vertebral Endplates (VEP). The degeneration of the IVD is marked by the dehydration of the Nucleus Pulposus, reducing the hydrostatic pressure inside the nucleus, resulting in a loss of capability to support compressive forces, during the active period, and to regain height during the resting period. This situation will compromise the role of shock absorber by the NP and transfers these forces to the AF. This transfer will result in cracks on the AF, deteriorating the IVD, allowing the ingrowth of vessels and nerves. This project was based on the developing a protocol to test suitable NP replacements, in hope to future assessment of discrete mechanical values and characteristics for an NP replacement. For this, Nucleus pulposus samples from goat, encapsulated Hydromed gel denominated “Raviolis” and Chitosan gels, produced via wet route using an ammonium environment, were confined compressed. Chitosan was rheologically tested and swelling capability of all the three type of materials was assessed. Results showed that the Nucleus Pulposus and “Raviolis” have similar mechanical behavior, being able to swell and “build up” hydrostatic pressure after a compression stage, while the Chitosan gel did not showed that ability. Therefore, “Raviolis” are a more suitable candidate to replace the NP than Chitosan gels. It was also observed that confined compression is the key test to perform on any possible candidate to replace the NP.

Abnormal spontaneous interleukin 8 receptor expression: a brief report of two cases

Interleukin 8 (CXCL8) is an autocrine chemokine specific for the chemoattraction and activation of granulocytes, NKT cells and T lymphocytes. Patients with tuberculosis and latent Mycobacterium tuberculosis infection were assessed for the spontaneous expression of CXCR1 (CD128) and CXCR2 on lymphocytes and monocytes. Compared with ex vivo profiles, increased spontaneous CXCR2 expression and normal CXCR1 expression were found on lymphocytes in two out of 59 individuals. Monocytes showed normal ex vivo profiles for both receptors. After stimulation with purified protein derivative, the in vitro levels of CXCL8 were below the median levels of all patients with prior tuberculosis. Spontaneous CXCR2 modulation did not cause notable variation in the in vitro levels of CXCL8.

Novel antibiotic-loaded orthopaedic bone cements: insights on drug release profiles and biocompatibility

Acrylic bone cement (BC) is widely used as an anchor of artificial joints. Bacterial infection due to biofilm formation and inflammation are common and difficult to treat problems associated with commercial available BC formulations. Research on novel BC compositions is urgently needed. The main objective of this thesis was to develop a new biocompatible antibiotic-loaded BC with improved release profile. To achieve that aim several additives were incorporated, as an antibiotic (levofloxacin) to combat bacterial growth, an anti-inflammatory drug (diclofenac) to decrease the inflammatory process and two well-known and broadly used biopolymers, alginate and chitosan in order to increase matrix porosity, and in this way to intensify the amount of released drug. Novel BC formulations were tested in order to find the most suitable one that had potential to proceed to clinical application. Numerous tests were conducted as: a) evaluation of drug release profiles in different biomimetic media, b) mechanical and surface studies, c) microbiological activity testing against Staphylococcus aureus and d) in vitro biocompatibility assays (fibroblasts and osteoblasts). In general, the addition of biopolymers increased drug release, didn’t compromised BC mechanical properties and increased BC hydrophilicity. Microbiological testing revealed that Lev[BC]Chi was the only matrix that reduced significantly biofilm formation. On the contrary, alginate and diclofenac loading into BC seemed to increase biofilm growth. Biocompatibility studies showed some decrease in cell viability, in particularly on osteoblasts, mainly due to the high amounts of released drugs. In conclusion, the present work has shown that the matrix with more potential to proceed in further investigations was Lev[BC]Chi. Other conditions (namely additives and drugs concentrations) should be evaluated with the other tested BC matrices before being discharged.

Production and characterization of electrospun composite fibers: confinement of thermosensitive microgels

Materials engineering focuses on the assembly of materials´ properties to design new products with the best performance. By using sub-micrometer size materials in the production of composites, it is possible to obtain objects with properties that none of their compounds show individually. Once three-dimensional materials can be easily customized to obtain desired properties, much interest has been paid to nanostructured poly-mers in order to build biocompatible devices. Over the past years, the thermosensitive microgels have become more common in the framework of bio-materials with potential applicability in therapy and/or diagnostics. In addition, high aspect ratio biopolymers fibers have been produced using the cost-effective method called electrospinning. Taking advantage of both microgels and electrospun fibers, surfaces with enhanced functionalities can be obtained and, therefore employed in a wide range of applications. This dissertation reports on the confinement of stimuli-responsive microgels through the colloidal electro-spinning process. The process mainly depends on the composition, properties and patterning of the precur-sor materials within the polymer jet. Microgels as well as the electrospun non-woven mats were investigated to correlate the starting materials with the final morphology of the composite fibers. PNIPAAm and PNIPAAm/Chitosan thermosensitive microgels with different compositions were obtained via surfactant free emulsion polymerization (SFEP) and characterized in terms of chemical structure, morphology, thermal sta-bility, swelling properties and thermosensitivity. Finally, the colloidal electrospinning method was carried out from spinning solutions composed of the stable microgel dispersions (up to a concentration of about 35 wt. % microgels) and a polymer solution of PEO/water/ethanol mixture acting as fiber template solution. The confinement of microgels was confirmed by Scanning Electron Microscopy (SEM). The electrospinning process was statistically analysed providing the optimum set of parameters aimed to minimize the fiber diameter, which give rise to electrospun nanofibers of PNIPAAm microgels/PEO with a mean fiber diameter of 63 ± 25 nm.

Improving silicon probe performance through layer-by-layer coating

Fully comprehending brain function, as the scale of neural networks, will only be possi-ble with the development of tools by micro and nanofabrication. Regarding specifically silicon microelectrodes arrays, a significant improvement in long-term performance of these implants is essential. This project aims to create a silicon microelectrode coating that provides high-quality electrical recordings, while limiting the inflammatory response of chronic implants. To this purpose, a combined chitosan and gold nanoparticles coating was produced allied with electrodes modification by electrodeposition with PEDOT/PSS in order to reduce the im-pedance at 1kHz. Using a dip-coating mechanism, the silicon probe was coated and then charac-terized both morphologically and electrochemically, with focus on the stability of post-surgery performance in anesthetized rodents. Since not only the inflammatory response analysis is vital, the electrodes recording degradation over time was also studied. The produced film presented a thickness of approximately 50 μm that led to an increase of impedance of less than 20 kΩ in average. On a 3 week chronic implant, the impedance in-crease on the coated probe was of 641 kΩ, compared with 2.4 MΩ obtained for the uncoated probe. The inflammatory response was also significantly reduced due to the biocompatible film as proved by histological tests.

Synthesis and characterization of C3-symmetric 1,3,5 - Benzenetricarboxamide derived supramolecular systems

The aim of this work was to study the self-assembly process of C3-symmetric molecules. To accomplish this objective 1,3,5 – benzentricarboxamides (BTA) derivatives were obtained. Five C3-symmetric molecules were synthesized in moderate to good yields (39-72%) using azo-benzene, aniline, benzylamine, tryptophan and tyrosine. The aggregation behavior of the BTA derivatives was probed with 1H-NMR spectroscopy, 1H-1H 2D Nuclear Overhauser Effect Spectroscopy (NOESY) and Diffusion Ordered Spectroscopy (DOSY). These experiments allowed to study the influence of H-bonding groups, aromatic rings, unsaturated bonds and the overall geometry in the molecular self-assembly associated with the different structural patterns present on these molecules. The stacking and large molecule behavior where observed in BTA 1, aniline derivative, BTA 4, tyrosine derivative or BTA 5, tryptophan derivative, with several of those discussed functional groups such as unsaturated bonds and H-bonding groups. BTA 5 was used in a few preliminary interaction studies with glucose and ammonium chloride showing interaction with the ammonium ion.

A negociação no mercado a prazo do MIBEL

This master thesis has been developed during the internship in the Supervision Department of Supervision of the Intermediation and Market Structures of CMVM. My collaboration in such department was mainly focused on the derivatives market of the Iberian Electricity Market (MIBEL). MIBEL embodies two organized markets – the derivatives market in Portugal and the spot market in Spain The trading activity in the derivatives market of MIBEL is processed through the trading platform of the regulated market managed by OMIP, however, much of the negotiation is over-the-counter. The aim of this work is to describe the market from a legal and economic perspective and to analyse the evolution of the negotiation, namely the impact of OTC in the regulated market trading. To achieve this, I propose to analyse also MiFID and EMIR rules over derivative contracts and the role of central counterparties, as they both are important to the discussion. In parallel, we found that OTC transactions are considerably higher than those traded in the regulated market managed by OMIP, those findings can be justified by the contractual relationships based on trust already established between the partiesarties. Nevertheless, since 2011 this trend changed by an increase of the registered OTC. Thereafter, although the parties continued to trade bilaterally, these transactions were registered in a central counterparty in order to eliminate the inherent risks related to the OTC derivatives transactions. This change in the negotiation pattern may also be influenced by the mandatory reporting of transactions imposed by EMIR, that requires for some classes of derivatives the centralized clearing and for all other requires the implementation of risk mitigation techniques.