1000 resultados para caracterização física e química
Resumo:
Foi estudado o comportamento do As (dopante tipo n) em dois tipos diferentes de substratos de Si: bulk e SIMOX (Separation by IMplanted OXygen). Ambos os substratos receberam uma implantação de 5x1014 cm-2 de As+ com energia de 20 keV. Após as implantações, as amostras foram recozidas por um dos dois processos a seguir: recozimento rápido (RTA, Rapid Thermal Annealing) ou convencional (FA, Furnace Annealing). A caracterização física e elétrica foi feita através do uso de diversas técnicas: SIMS (Secondary Ion Mass Spectrometry), RBS (Rutherford Backscattering Spectrometry), MEIS (Medium Energy Ion Scattering), medidas de resistência de folha, medidas Hall e medidas de perfil de portadores por oxidação anódica. Na comparação entre os substratos SIMOX e Si bulk, os resultados indicaram que o SIMOX se mostrou superior ao Si bulk em todos os aspectos, ou seja, menor concentração de defeitos e menor perda de dopantes para a atmosfera após os recozimentos, maior concentração de portadores e menor resistência de folha. A substitucionalidade do As foi maior no SIMOX após RTA, mas semelhante nos dois substratos após FA. Na comparação entre RTA e FA, o primeiro método se mostrou mais eficiente em todos os aspectos mencionados acima. As explicações para o comportamento observado foram atribuídas à presença de maior concentração de vacâncias no SIMOX do que no Si bulk e à interação destas vacâncias com os dopantes.
Resumo:
O material trata-se da elaboração de videoaulas. Nele, o professor Adail R. L. Gonçalves enfatiza elementos audiovisuais para gravação, como a caracterização física .
Resumo:
O plasma não térmico nos cuidados de saúde é um campo emergente que tem as suas raízes na ciência de plasmas. Este tipo de investigação tem crescido rapidamente e é agora objeto de um amplo esforço de pesquisa interdisciplinar envolvendo a medicina, a biologia, a física, a química e a engenharia. Têm sido feitos vários trabalhos de modo a elucidar quais as interações das espécies produzidas pelo plasma com os sistemas vivos. É evidente que o mecanismo da interação do plasma com os sistemas vivos é complexo, em parte devido à complexidade do plasma mas principalmente devido à enorme complexidade da biologia. O principal objetivo desta dissertação foi observar os efeitos do plasma não térmico à pressão atmosférica (PNTPAs) no desenvolvimento larval e anomalias morfológicas de Drosophila melanogaster. Para o efeito, foram expostas e analisadas fenotipicamente 2.566 larvas após exposição, dos diferentes estádios (1.º, 2.º e 3.º) de desenvolvimento. Os testes foram realizados com aplicações de plasma com e sem ultra violeta, em duas linhas diferentes de Drosophila; uma linha selvagem preparada por nós e uma linha laboratorial. A análise fenotípica revelou que após exposição as larvas apresentavam alterações no fenótipo e no comportamento que não foram observadas no controlo, nomeadamente anomalias nas mudas, traqueias partidas, formação de massas melanóticas que podiam persistir até à fase adulta, excesso de gotículas lipídicas, atraso no desenvolvimento, comportamento de não alimentação e formação de pupa imatura que levava à formação de pupa precoce e morte pupal. Na fase pupal, as anomalias mais comuns estavam relacionadas com a forma do pupário (causadas pela pipação prematura), apresentando um desenvolvimento aberrante. Entre os vários fenótipos observados, o mais significativo foi o criptocefálico (alterações na eversão dos discos imaginais) levando à morte pupal. Nos adultos, as principais anomalias morfológicas foram registadas na formação e segmentação das patas, na forma e padrão das nervuras das asas e na formação do tórax. A similaridade destes resultados com trabalhos publicados relacionados com a hormona esteróide ecdisona indicam que provavelmente o PNTPA poderá ter influenciado a biossíntese e/ou a regulação da ecdisona, a principal hormona que regula o desenvolvimento e a metamorfose em Drosophila.
Resumo:
The power industry generates as waste ceramic bodies of electrical fuses that are discarded after use. The formulation of ceramic bodies for porcelain electrical insulators using waste from the bodies fuse allocation promotes environmentally appropriate, through the reuse of the material. This work evaluated the technical feasibility of using waste for use in electrical porcelains with formulations containing the residue, feldspar and kaolinite. The raw materials were processed through grinding and sieving to 200 mesh. The ceramic material obtained from the proposed formulations with 25%, 30%, 34% and 40% of the residue went through a vibratory mill for grinding and homogenization, and then were sieved at 325 mesh. The samples were shaped in a uniaxial press, with the application of 25 MPa and sintered at 1100° C, 1150°C, 1200°C, 1225°C and 1250°C, at levels of 20 and 45 minutes. Were also developed bodies of evidence with reference formulations obtained without residue, to establish a comparison on physical, mechanical and electrical. The tests were conducted and technology: linear shrinkage, porosity, water absorption, resistance to bending to three points, measuring insulation resistance electrical resistivity of the material, X-ray diffraction and X-ray fluorescence Waste characterizations pointed to the existence of two phases: mullite and quartz phases are of great importance in the microstructure of the ceramic and this fact reveals a possibility for reuse in electrical porcelains. The mullite is an important constituent because it is a phase that makes it possible to increase the mechanical strength in addition to the body allows the use at high temperatures. The use of ceramic bodies residue fuses, proved feasible for application in electrical porcelain and the most significant results were obtained by the formulations with 25% waste and sintering at 1200°C
Resumo:
The objectives of this clinical study was to evaluate the use of the toothpaste with fluoride and without fluoride and the daily tooth brushing are effective in the reversion of the dental enamel conditioned by acid. Another objective of this clinical study was to evaluate if the positioning of orthodontic accessories with glass ionomer cement helps in the reversion of the dental enamel conditioned by acid, when compared to composed resin. One hundred and twenty teeth were selected with indication of extraction by orthodontic reasons. The 30 volunteers were divided, randomly, in two groups. A group used toothpaste without fluoride and the other with it. The teeth of the sample were shuffled, in each volunteer. The teeth were conditioned by the 37% orthophosphoric acid. One of the conditioned teeth stayed in the mouth and suffered action of the abrasion for the tooth brushing, in another teeth a stainless steel mesh protection was positioned with glass ionomer cement, in another tooth the screen was glued with composed resin, in a fourth tooth (the control) was only conditioned after the extractions, 60 days later. All the teeth were appraised through DIAGNOdent, MEVA and EDS. In the obtained data it was possible to observe that there were not statistic significant differences in any comparison, even in the group that did not have access to the fluoride in the toothpaste as in the other that had. According with the used methodology, it was possible to observe too that there was not statistic significant differences in any comparison, even in the group that had the stainless steel mesh positioned with glass ionomer cement as in the group that the stainless steel mesh was positioned with composed resin. However, it was observed that there was an improvement in the topography of the enamel in all the teeth. The accomplishment of this study was facilitated due to the participation of the researchers' of the health area (dentistry), materials engineer, physics and chemistry. The researchers were originating from the Federal University of Rio Grande do Norte and of the University of Queensland, in Australia. This interdisciplinary group was decisive in the accomplishment of the study. It can be concluded that the enamel tends to return to its initial aspect, even if the patient does not have access to fluoride. That is probably due the action of the abrasion for the tooth brushing and mastication. In spite of it not being significant, it is suggested that the conditioned enamel was more resistant to the abrasion in the group that had access to fluoride. It was also possible to conclude that the fluoride liberated by the glass ionomer was not enough to provide a significant difference in the enamel conditioned by the acid, when compared with the composed resin, even in the group that did not use fluoride in the toothpaste as in the group that used
Resumo:
The quarrel on the urban intensific use of determined areas of the city is carried through in some levels of the society, which had to the fact to bring direct influences the population that inhabits it. The question to become an area to intensific use, implies in determining that the local infrastructure has the capacity to take care of to a bigger amount of people, inhabitants or passers-by. In the quarter of Ponta Negra, in Natal city (state of RN), its condition of area to intensific use to the municipal Law 27/2000 happened due that it starts to allow a bigger level of occupation of part of the quarter. This law has a direct relation with the installation of a complementary infrastructure in the quarter, to put does not send to its complementation and maintenance, what it takes the consequences that are felt by the population. This work has as main objective the identification of the decurrent significant consequences of the creation of Ponta Negra s Intensific Use Zone, according to vision of the population of the quarter. The way followed for this involves the compatible bibliography research with the subject, analysis of documents that treat on the quarter, mappings of the area in search of a physical characterization and mainly, an application of questionnaire next to local population. In this questionnaire it is the main point of the necessary collection of data to the work, indicating the point of view of the population not only on the negative points, but also on the positive points that had happened since the creation of Intensific Use Zone. The answers indicate problems of natures social, infrastructure and enviromental, compatible with the problems of other areas that had passed the same for process, as point the studied bibliography, indicating imperfections in the planning process and maintenance of Ponta Negra s Intensific Use Zone
Resumo:
Nesta pesquisa procurou-se verificar as características físicas e químicas de bebidas lácteas preparadas com três concentrações de soro de queijo Minas Frescal (30, 40 e 50%), empregando-se dois tipos de culturas lácticas: uma tradicional para iogurte (YC-180) contendo cepas mistas de Streptococcus salivarus subsp. thermophilus, Lactobacillus delbrueckii subsp. lactis e Lactobacillus delbrueckii subsp. bulgaricus e outra (ABY-1) contendo cepas mistas de Lactobacillus delbrueckii subsp. bulgaricus, Lactobacillus acidophillus, Bifidobacteria e Streptococcus salivarius subsp. thermophilus. Constatou-se que as bebidas lácteas apresentaram diferença estatística no tempo zero para os teores de gordura e de extrato seco. À medida em que se elevou a proporção de soro em relação ao leite, os teores de gordura e de extrato seco diminuíram. O teor de proteína também diminuiu à medida em que se aumentou o teor de soro nas bebidas lácteas, embora a diferença não tenha sido tão acentuada quanto as observadas para os teores de gordura e de extrato seco. em relação à lactose, não se constatou diferença entre os tratamentos. Os teores de soro não influenciaram o índice de proteólise das bebidas lácteas. Verificou-se todavia que as bebidas elaboradas com a cultura probiótica ABY-1 apresentaram valores superiores para proteólise quando comparadas às bebidas elaboradas com as culturas YC-180. As bebidas lácteas elaboradas com 30% de soro apresentaram maiores valores para viscosidade. As bebidas elaboradas com a cultura YC-180 apresentaram valores superiores para viscosidade durante o período de armazenamento.
Resumo:
The adhesive mortars are a mixture of cement, sand, and additives to polymers that retain the mixing water and promotes adherence, being used in setting on various ceramic substrates. The sand used in the production of these mortars is from the riverbeds, and with the increasing restriction of these sands extraction by environmental agencies, and often having to be transported over long distances to the consumer center. This work aims to design and physical and mechanical characterization of ecological adhesive mortar with total replacement of natural sand by sand from the crushing of limestone, and the addition of mineral ash biomass of cane sugar in partial replacement cement used in the production of adhesive mortar , aiming compositions that meet the regulatory specifications for use adhesive mortar. Standardized tests to determine the tensile bond strength (NBR 14081-4), determination of open time (NBR 14081-3) and determination of slip (NBR 14081-5) were performed. Were also conducted trials squeeze flow in different formulation, the mortar with addition of 15 % gray biomass of cane sugar for cement mortars as well as the total replacement of natural sand by sand limestone crushing, got the best performance among the mortars studied, it was found that the addition of biomass to replace cement is perfectly feasible due to its pozzolanic activity, which contributed to this reduction in the cement matrix formation of adhesive mortar
Resumo:
The municipal district of Equador-RN is located in an area of great amounts of ores, being your main economical activity the extraction and the kaolin improvement. The main originating from environmental problem that activity is the amount of generated residue, about 70% of the extracted kaolin. The residues are simply piled up in lands of the improvement companies, occupying like this a large area and causing impact in the existent flora. When dry, the residues transform powdered and for the action of the wind, they disperse, polluting the air. Being like this, the present work has as objective evaluates the incorporation of the great residue, originating from of the kaolin improvement, in partial substitution of all the employed aggregates in a conventional mixture of asphalt concrete, which was used in the paving of BR101/RN061 - passage between Ponta Negra and Ares. That evaluation was accomplished in three stages. The first refers to the evaluation of the physical, thermal and mineralogical characteristics of the residue with the intention of to classify it and to define your application as aggregate (small and great). The second refers to the physical characterization of the aggregates and of the asphalt material used in the conventional mixture. And the third, to the evaluation of the mixtures containing residue, which were elaborated starting from the conventional mixture with the gradual incorporation of the residue, from 5 to 40%, in substitution to the part of the conventional aggregates, in way to obtain similar particle size curves the one of the conventional mixture. That evaluation was accomplished through the comparison between the volumetric composition, the mechanical behavior and the susceptibility to the humidity of the mixtures containing residue with the one of the conventional mixture, and with the one of the DNIT specifications. The results show that the great residue originating from of the kaolin improvement has grains of the most varied size, being like this, it can substitute part of all the conventional aggregates and of the filler in an asphalt mixture. Besides, your mineralogical composition presented the same present minerals in the composition of conventional aggregates used in paving. The results evaluation of the volumetric composition of the mixtures containing residue indicates that it can use up to 30% of residue in substitution to the conventional aggregates. The evaluation of the mechanical behavior of those mixtures indicates that the residue increment in the studied mixtures caused an increase of the stability and a reduction of the resistance to the traction. The values obtained in the resistance to the traction meet below the minimum value specified by DNIT, but close to the value obtained in the conventional mixture. When taking in consideration the susceptibility of the same ones to the humidity, the results indicate that she can use up to 25% of residue
Resumo:
Through out the course of a steady increase in search and recovery of space in the coastal zone, there is also an expanding concern about the erosion processes of this area. The main problem in coastal areas is that urbanization occurs in a disorderly fashion and unsustainable, further aggravating the problems of coastal dynamics. The study area of this work is located on the southern coast of Pirangi do Norte beach to about 20km south of Natal, capital of Rio Grande do Norte in the Parnamirim City. This area has the length of approximately 1km, divided into three sections (Western, Central and Eastern) with a morphology consisting of a tableland at the top, sea cliffs in the West and Central parts and sand dunes in the Eastern section, both vegetated, and a coastal plain on the inferior part associated with the presence of beach rocks. This study aimed to analyze the erosion processes operating in the excerpt of Pirangi do Norte beach and assess the feasibility of their monitoring making use of DGPS (Global Positioning System Differential mode). During the work it was carried out a physical description of the area through photo-interpretation and site survey after measurement of the shoreline in the period between November 2004 and November 2009 and beach profiles between August 2005 and July 2006. The analysis of the results of the annual surveys showed the occurrence of variations of the shoreline along the stretch traveled. Sites are identified in advancement coast from the sea and it was verified in loco the presence of erosion with deposition of materials on the lower part of the coastal bluff, the former position of the shoreline, showing a false notion of advancing it. This leads to the conclusion that the data collected in a survey of the shoreline should always be accompanied by photographic records of the local area and with the highest rate of erosion, thus avoiding the mistake of treating the deposit materials as evidence of progress coast. At the end of the study, after a review of various works to mitigate the erosion in the coastal zone, it is recommended to the area of study the adoption of an artificial feeding of the beach, aiming the minimization of the erosive effects of the tides. Moreover, it is suggested that even the continuity of monitoring, maintenance of existing vegetation and control of the occupation on the edge of sea cliffs
Resumo:
O objetivo deste trabalho foi avaliar as alterações nas propriedades físicas de substratos em função de sua reutilização para o cultivo do tomateiro do grupo cereja, cultivar Sindy. O delineamento experimental adotado foi em parcelas subdivididas com os sete substratos (nas parcelas) e três épocas de caracterização física dos substratos (nas subparcelas). As parcelas foram agrupadas em blocos casualizados, com quatro repetições. Os sete substratos resultaram da combinação de diferentes proporções volumétricas de três componentes: areia, bagaço de cana-de-açúcar e casca de amendoim. As propriedades físicas dos substratos avaliadas foram submetidas à análise de variância, sendo as médias comparadas pelo teste de Tukey a 5% de probabilidade. A reutilização do substrato composto por partes iguais dos três componentes promoveu aumento da densidade seca e do volume de água facilmente disponível, e redução da porosidade total, do espaço de aeração e do volume de água remanescente.
Resumo:
Pós-graduação em Biologia Animal - IBILCE
Resumo:
Pós-graduação em Ciências Biológicas (Biologia Vegetal) - IBRC
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Agronomia (Energia na Agricultura) - FCA