Intermediate pyrolysis and product identification by TGA and Py-GC/MS of green microalgae and their extracted protein and lipid components

The thermo-chemical conversion of green microalgae Chlamydomonas reinhardtii wild type (CCAP 11/32C), its cell wall deficient mutant C. reinhardtii CW15 (CCAP 11/32CW15) and Chlorella vulgaris (CCAP 211/11B) as well as their proteins and lipids was studied under conditions of intermediate pyrolysis. The microalgae were characterised for ultimate and gross chemical composition, lipid composition and extracted products were analysed by Thermogravimetric analysis (TG/DTG) and Pyrolysis-gaschromatography/mass-spectrometry (Py-GC/MS). Proteins accounted for almost 50% and lipids 16-22 % of dry weight of cells with little difference in the lipid compositions between the C. reinhardtii wild type and the cell wall mutant. During TGA analysis, each biomass exhibited three stages of decomposition, namely dehydration, devolatilization and decomposition of carbonaceous solids. Py-GC/MS analysis revealed significant protein derived compounds from all algae including toluene, phenol, 4-methylphenol, 1H-indole, 1H-indole-3methyl. Lipid pyrolysis products derived from C. reinhardtii wild type and C. reinhardtii CW15 were almost identical and reflected the close similarity of the fatty acid profiles of both strains. Major products identified were phytol and phytol derivatives formed from the terpenoid chain of chlorophyll, benzoic acid alkyl ester derivative, benzenedicarboxylic acid alkyl ester derivative and squalene. In addition, octadecanoic acid octyl ester, hexadecanoic acid methyl ester and hydrocarbons including heptadecane, 1-nonadecene and heneicosane were detected from C. vulgaris pyrolysed lipids. These results contrast sharply with the types of pyrolytic products obtained from terrestrial lignocellulosic feedstocks and reveal that intermediate pyrolysis of algal biomass generates a range of useful products with wide ranging applications including bio fuels.

Increase of energy recovery from sewage sludge

The use of the pyrolysis process to obtain valuable products from biomass is amongst the technologies being investigated as a source for renewable energy. The pyrolysis process yields products such as biochar, bio-oil and non condensable gases. The main objective of this project is to increase energy recovery from sewage sludge by utilising the intermediate pyrolysis process. The intermediate pyrolysis has a residence time ranging from 5 to 10 minutes. The main product yields from sewage sludge pyrolysis are 50 wt% biochar, 40 wt% bio-oil and 10 wt% non condensable gases. The project was carried out on a pilot plant scale reactor with a load capacity of 20 kg/h. This enabled a high yield of biochar and bio-oil. The characterisation of the products indicated that the organic phase of the bio-oil had good fuel properties such as having high energy content of 39 MJ/kg, low acid number of 21.5, high flash point of 150 and viscosity of 35 cSt. An increase in pyrolysis experiments enabled large quantities of pyrolysis oil production. Co-pyrolysis of sewage sludge was carried out on laboratory scale with mixed wood, rapeseed and straw. It found that there was an increase in bio-oil quantity with rapeseed while co-pyrolysis with wood helped to mask the smell of the sludge pyrolysis oil. Engine test were successfully carried out in an old Lister engine with pyrolysis oil fractions of 30% and 50% blended with biodiesel. This indicates that these pyrolysis oil fractions can be used in similar engine types without any problems however long term effects in ordinary engines are unknown. An economic evaluation was carried out about the implementation of the intermediate pyrolysis process for electricity production in a CHP using the pyrolysis oil. The prices of electricity per kWh were found to be very high.

Recovery of glass fibre and carbon fibres from reinforced thermosets by batch pyrolysis and investigation of fibre re-using as reinforcement in LDPE matrix

A semi-batch pyrolysis process was used to recover samples carbon fibre and glass fibre from their respective wastes. The mechanical properties of the recovered fibres were tested and compared to those of virgin fibres, showing good retention of the fibre properties. The recovered fibres were then used to prepare new LDPE composite materials with commercial and laboratory-synthesized compatibilizers. Mild oxidation of the post-pyrolysis recovered fibres and the use of different compatibilizers gave significant improvements in the mechanical properties of the LDPE composites; however some of the manufactured composites made from recovered fibres had properties similar to those made from virgin fibres.

The potential of solid phase microextraction (SPME) for the recovery of explosives followed by gas and liquid chromatographic analysis

The potential of solid phase microextraction (SPME) in the analysis of explosives is demonstrated. A sensitive, rapid, solventless and inexpensive method for the analysis of explosives and explosive odors from solid and liquid samples has been optimized using SPME followed by HPLC and GC/ECD. SPME involves the extraction of the organic components in debris samples into sorbent-coated silica fibers, which can be transferred directly to the injector of a gas chromatograph. SPME/HPLC requires a special desorption apparatus to elute the extracted analyte onto the column at high pressure. Results for use of GC/ECD is presented and compared to the results gathered by using HPLC analysis. The relative effects of controllable variables including fiber chemistry, adsorption and desorption temperature, extraction time, and desorption time have been optimized for various high explosives. ^

The potential of solid phase microextraction (spme) for the recovery of explosives followed by gas and liquid chromatographic analysis

The potential of solid phase microextraction (SPME) in the analysis of explosives is demonstrated. A sensitive, rapid, solventless and inexpensive method for the analysis of explosives and explosive odors from solid and liquid samples has been optimized using SPME followed by HPLC and GC/ECD. SPME involves the extraction of the organic components in debris samples into sorbent-coated silica fibers, which can be transferred directly to the injector of a gas chromatograph. SPME/HPLC requires a special desorption apparatus to elute the extracted analyte onto the column at high pressure. Re suits for use of GC[ECD is presented and compared to the results gathered by using HPLC analysis. The relative effects of controllable variables including fiber chemistry, adsorption and desorption temperature, extraction time, and desorption time have been optimized for various high explosives.

Mothers’ perception of recovery and satisfaction with patent medicine dealers’ treatment of childhood febrile conditions in rural communities

Background Infant mortality in rural areas of Nigeria can be minimized if childhood febrile conditions are treated by trained health personnel, deployed to primary healthcare centres (PHCs) rather than the observed preference of mothers for patent medicine dealers (PMDs). However, health service utilization/patronage is driven by consumer satisfaction and perception of services/product value. The objective of this study was to determine ‘mothers’ perception of recovery’ and ‘mothers’ satisfaction’ after PMD treatment of childhood febrile conditions, as likely drivers of mothers’ health-seeking behaviour, which must be targeted to reverse the trend. Methods Ugwuogo-Nike, in Enugu, Nigeria, has many PMDs/PHCs, and was selected based on high prevalence of childhood febrile conditions. In total, 385 consenting mothers (aged 15–45 years) were consecutively recruited at PMD shops, after purchasing drugs for childhood febrile conditions, in a cross-sectional observational study using a pre-tested instrument; 33 of them (aged 21–47 years) participated in focus group discussions (FGDs). Qualitative data were thematically analysed while a quantitative study was analysed with Z score and Chi square statistics, at p < 0.05. Results Most participants in FGDs perceived that their child had delayed recovery, but were satisfied with PMDs’ treatment of childhood febrile conditions, for reasons that included politeness, caring attitude, drug availability, easy accessibility, flexibility in pricing, shorter waiting time, their God-fearing nature, and disposition as good listeners. Mothers’ satisfaction with PMDs’ treatment is significantly (p < 0.05) associated with mothers’ perception of recovery of their child (χ2 = 192.94, df = 4; p < 0.0001; Cramer’s V = 0.7079). However, predicting mothers’ satisfaction with PMDs’ treatment from a knowledge of mothers’ perception of recovery shows a high accord (lambda[A from B] = 0.8727), unlike when predicting mothers’ perception of recovery based on knowledge of mothers’ satisfaction with PMDs’ treatment (lambda[A from B] = 0.4727). Conclusions Mothers’ satisfaction could be the key ‘driver’ of mothers’ health-seeking behaviour and is less likely to be influenced by mothers’ perception of recovery of their child. Therefore, mothers’ negative perception of their child’s recovery may not induce proportionate decline in mothers’ health-seeking behaviour (patronage of PMDs), which might be influenced mainly by mothers’ satisfaction with the positive attributes of PMDs’ personality/practice and sets an important agenda for PHC reforms.

Recovery of palladium from a spent automobile catalyst leaching solution by a thiodiglycolamide derivative

In the sequence of previous research on the development of novel liquid-liquid amidetype compounds to efficiently and selectively extract platinum-group metals (PGMs) from concentrated hydrochloric acid media, a specific thiodiglycolamide derivative – N,N’-dimethyl-N,N’-dicyclohexylthiodiglycolamide (DMDCHTDGA) – has been applied for the recovery of palladium(II) from a spent automobile catalyst leaching solution, containing palladium(II) and rhodium(III) as PGMs. The results obtained are rather promising, since the DMDCHTDGA behavior towards the two PGMs is similar to that observed for hydrochloric acid aqueous media studied before, simulating the real leaching phases. Within eleven metal elements co-existing in solution, the majority in high fold-excesses, only aluminum(III) and cerium(III) interfere in the palladium(II) liquid-liquid extraction process, requiring further optimization.

Understanding immobilised enzymes by NMR spectroscopy

Enzyme immobilisation is the conversion of a soluble enzyme molecule into a solid particle form. This allows the recovery of the enzyme catalyst for its re-use and avoids protein contamination of the product streams. A better understanding of immobilised enzymes is necessary for their rational development. A more rational design can help enormously in the applicability of these systems in different areas, from biosensors to chemical industry. Immobilised enzymes are challenging systems to study and very little information is given by conventional biochemical analysis such as catalytic activity and amount of protein. Here, solid-state NMR has been applied as the main technique to study these systems and evaluate them more precisely. Various approaches are presented for a better understanding of immobilised enzymes, which is the aim of this thesis. Firstly, the requirements of a model system of study will be discussed. The selected systems will be comprehensibly characterised by a variety of techniques but mainly by solid-state NMR. The chosen system will essentially be the enzyme α-chymotrypsin covalently immobilised on two functionalised inorganic supports – epoxide silica and epoxide alumina – and an organic support – Eupergit®. The study of interactions of immobilised enzymes with other species is vital for understanding the macromolecular function and for predicting and engineering protein behaviour. The study of water, ions and inhibitors interacting with various immobilised enzyme systems is covered here. The interactions of water and sodium ions were studied by 17O and 23Na multiple-quantum techniques, respectively. Various pore sizes of the supports were studied for the immobilised enzyme in the presence of labelled water and sodium cations. Finally, interactions between two fluorinated inhibitors and the active site of the enzyme will be explored using 19F NMR, offering a unique approach to evaluate catalytic behaviour. These interactions will be explored by solution-state NMR firstly, then by solid-state NMR. NMR has the potential to give information about the state of the protein in the solid support, but the precise molecular interpretation is a difficult task.

An explanation of consumer trust recovery in a food retailer

An organization trusted by consumers enjoys a number of benefits. Unfortunately, instances of trust-damaging events involving organizations happen often. Damaged consumer trust in an organization has numerous negative consequences for the organization and for consumers. Currently, there is a paucity of theory about consumer trust recovery. So, understanding why and how consumer trust recovery occurs is timely, and theoretically and practically relevant. However, the findings from this study suggest that we need to distinguish between two kinds of consumer trust recovery. The first (I call it unconscious consumer trust recovery) refers to trust recovery that occurs without the consumer being fully conscious of it. In other words, a consumer is aware of their damaged trust during the scandal, but is not aware that their trust in the organization has improved. The consumer does not think about his or her recovered trust, just as they did not think about their level of trust before the scandal. The consumer trust is habitual. The second (I call it conscious consumer trust recovery) refers to an improvement in damaged trust where the consumer is fully conscious of their trust recovery. In other words, in conscious trust recovery the consumer is aware that the scandal damaged their trust in the organization. Also, after the scandal, in contrast to unconscious trust recovery, in conscious trust recovery the consumer is also fully aware that he trusts the organization as much or more than during the scandal. My aim is to inductively develop a theory explaining each type of consumer trust recovery. To do so, I use Charmazian grounded theory methodology, because this methodology is developed for theory-building from data and is aligned with the philosophical underpinnings of this study. The empirical context for this study is the meat adulteration scandal (“the horse meat scandal”) in 2013 in the UK. I collect and analyse empirical data about both types of trust recovery in an organization from 31 consumers that experienced both types. My analysis shows that when consumers perceive the scandal as less important, they experience unconscious trust recovery. This happens because the reduced importance of the scandal leads to a shift in consumers’ attention, which in turn leads to their inattentiveness to the scandal. Consumer inattentiveness is an immediate antecedent of unconscious trust recovery. Conscious consumer trust recovery occurs because consumers see cues indicating to them that the food retailer has improved product control systems, which in turn leads to consumer perceptions of the organization’s renewed ability. Consumer perception of renewed ability is an immediate antecedent of their conscious trust recovery. My findings lead me to make three main theoretical contributions to the theory of trust recovery in general and to consumer trust recovery in particular. The first contribution lies in showing that there are two types of consumer trust recovery in an organization, not one, as previously conceptualised, and that the same consumers can experience both types. The second contribution is a theory of unconscious consumer trust recovery in an organization that involves three concepts: consumers’ perceived importance of the scandal, consumers’ shift of attention, and consumer inattentiveness. The third contribution is the finding that conscious recovery of consumer trust occurs even when existing theory of trust recovery would predict that it would not. This study can help managers aiming to repair consumer trust in an organization by identifying a set of antecedents and underlying mechanisms that can guide such trust repair.

Natural recovery of the benthic nematode assemblages associated to Zostera noltii seagrass beds after physical disturbance caused by digging harvest activity

Seagrass beds are productive ecosystems that maintain high levels of biodiversity, making them susceptible to anthropogenic pressures such as bivalve harvesting. Nematodes are considered great ecological indicators as changes in their density, diversity and structure may represent changes in the environment. This experimental fieldwork aimed to assess the impact of the bivalve harvesting on the nematodes assemblage of a seagrass bed in the Mira estuary by simulating the digging activity. Two plots were subjected to the digging (D1 and D19) and two plots were control (C11 and C18). The sampling took place in five occasions: T0 – before digging; T1 – 14 days; T2 – 45 days; T3 – 75 days; and T4 – 165 days after digging. The results showed no significant difference in the nematode assemblages’ density, diversity and trophic composition between treatments and sampling times, evidencing their high tolerance for naturally stressed environments and to the level of digging they were exposed; Recuperação natural das comunidades de nematodes bentónicos associados aos povoamentos de Zostera noltii após atividade de marisqueio Resumo: As pradarias marinhas são ecossistemas produtivos que suportam elevados níveis de biodiversidade, pelo que estão sujeitos a pressões antropogénicas. Os nematodes são bons indicadores ecológicos pois respondem rapidamente a qualquer perturbação por alterações na densidade, diversidade e estrutura. Este trabalho experimental teve como finalidade o estudo da recuperação natural das comunidades de nematodes associados aos povoamentos de Zostera noltii pela simulação da atividade de marisqueio. Dois plots foram sujeitos a revolvimento (D1 e D19) e dois plots serviram como controlo (C11 e C18) e foram efetuadas amostragens em cinco ocasiões: T0 – antes do revolvimento; T1 – 14 dias; T2 – 45 dias; T3 – 75 dias; e T4 – 165 dias após revolvimento. Os resultados obtidos não mostraram diferenças significativas na diversidade, densidade e composição trófica das comunidades de nematodes entre tratamentos e tempos de amostragem, evidenciando a sua elevada tolerância a ambientes naturalmente dinâmicos e ao nível de revolvimento a que foram expostas.

Recovery of gold(0) nanoparticles from aqueous solutions using effluents from a bioremediation process

The use of biological processes with the aim of the recovery of gold from low-concentration solutions derived from leaching of secondary sources is gaining increasing importance owing to the scarcity of the primary resources and the economic and environmental advantages usually presented by these methods. Thus, the addition in batch and continuous processes of different solutions containing biogenic sulphide, which was generated by the activity of sulphate-reducing bacteria (SRB), to gold(III) solutions was investigated for that purpose. In the batch experiments, AuS nanoparticles with sizes of between 6 and 14 nm were obtained (corresponding to 100% removal of Au(III) from solution) if the biogenic sulphide was generated in a typical nutrient medium for SRB, whereas Au(0) nanoparticles with sizes of below 8 nm were obtained (corresponding to 62% removal of Au(III)) if effluent from a SRB bioremediation process for treating acid mine drainage (AMD) was used instead. These results stimulated the development of a continuous process of addition, in which two sulphide-rich effluents, which resulted from a SRB bioremediation process for treating two types of AMD (from a uranium mine and a polysulphide mine), were tested. In both cases, Au(0) nanoparticles with sizes of between 6 and 15 nm were mainly obtained, and the percentage removal of Au(III) from solution ranged from 76% to 100%. The processes described allow the simultaneous treatment of AMD and recovery of metallic gold nanoparticles, which are a product with a wide range of applications (e.g., in medicine, optical devices and catalysis) and high economic value. The synthesis process described in this work can be considered as novel, because it is the first time, to our knowledge, that the use of effluent from a SRB bioremediation process has been reported for the recovery of gold(III) as gold(0) nanoparticles.

Recovery of degraded areas due to nickel mining by using native species of Brazilian Savannah, Barro Alto, GO.

2016