Digital predistorter design using B-Spline neural network and inverse of De Boor algorithm

This contribution introduces a new digital predistorter to compensate serious distortions caused by memory high power amplifiers (HPAs) which exhibit output saturation characteristics. The proposed design is based on direct learning using a data-driven B-spline Wiener system modeling approach. The nonlinear HPA with memory is first identified based on the B-spline neural network model using the Gauss-Newton algorithm, which incorporates the efficient De Boor algorithm with both B-spline curve and first derivative recursions. The estimated Wiener HPA model is then used to design the Hammerstein predistorter. In particular, the inverse of the amplitude distortion of the HPA's static nonlinearity can be calculated effectively using the Newton-Raphson formula based on the inverse of De Boor algorithm. A major advantage of this approach is that both the Wiener HPA identification and the Hammerstein predistorter inverse can be achieved very efficiently and accurately. Simulation results obtained are presented to demonstrate the effectiveness of this novel digital predistorter design.

Smart-phone based electrocardiogram wavelet decomposition and neural network classification

This paper discusses ECG classification after parametrizing the ECG waveforms in the wavelet domain. The aim of the work is to develop an accurate classification algorithm that can be used to diagnose cardiac beat abnormalities detected using a mobile platform such as smart-phones. Continuous time recurrent neural network classifiers are considered for this task. Records from the European ST-T Database are decomposed in the wavelet domain using discrete wavelet transform (DWT) filter banks and the resulting DWT coefficients are filtered and used as inputs for training the neural network classifier. Advantages of the proposed methodology are the reduced memory requirement for the signals which is of relevance to mobile applications as well as an improvement in the ability of the neural network in its generalization ability due to the more parsimonious representation of the signal to its inputs.

B-spline neural network based single-carrier frequency domain equalisation for Hammerstein channels

A practical single-carrier (SC) block transmission with frequency domain equalisation (FDE) system can generally be modelled by the Hammerstein system that includes the nonlinear distortion effects of the high power amplifier (HPA) at transmitter. For such Hammerstein channels, the standard SC-FDE scheme no longer works. We propose a novel Bspline neural network based nonlinear SC-FDE scheme for Hammerstein channels. In particular, we model the nonlinear HPA, which represents the complex-valued static nonlinearity of the Hammerstein channel, by two real-valued B-spline neural networks, one for modelling the nonlinear amplitude response of the HPA and the other for the nonlinear phase response of the HPA. We then develop an efficient alternating least squares algorithm for estimating the parameters of the Hammerstein channel, including the channel impulse response coefficients and the parameters of the two B-spline models. Moreover, we also use another real-valued B-spline neural network to model the inversion of the HPA’s nonlinear amplitude response, and the parameters of this inverting B-spline model can be estimated using the standard least squares algorithm based on the pseudo training data obtained as a byproduct of the Hammerstein channel identification. Equalisation of the SC Hammerstein channel can then be accomplished by the usual one-tap linear equalisation in frequency domain as well as the inverse Bspline neural network model obtained in time domain. The effectiveness of our nonlinear SC-FDE scheme for Hammerstein channels is demonstrated in a simulation study.

Adaptive B-spline neural network based nonlinear equalization for high-order QAM systems with nonlinear transmit high power amplifier

High bandwidth-efficiency quadrature amplitude modulation (QAM) signaling widely adopted in high-rate communication systems suffers from a drawback of high peak-toaverage power ratio, which may cause the nonlinear saturation of the high power amplifier (HPA) at transmitter. Thus, practical high-throughput QAM communication systems exhibit nonlinear and dispersive channel characteristics that must be modeled as a Hammerstein channel. Standard linear equalization becomes inadequate for such Hammerstein communication systems. In this paper, we advocate an adaptive B-Spline neural network based nonlinear equalizer. Specifically, during the training phase, an efficient alternating least squares (LS) scheme is employed to estimate the parameters of the Hammerstein channel, including both the channel impulse response (CIR) coefficients and the parameters of the B-spline neural network that models the HPA’s nonlinearity. In addition, another B-spline neural network is used to model the inversion of the nonlinear HPA, and the parameters of this inverting B-spline model can easily be estimated using the standard LS algorithm based on the pseudo training data obtained as a natural byproduct of the Hammerstein channel identification. Nonlinear equalisation of the Hammerstein channel is then accomplished by the linear equalization based on the estimated CIR as well as the inverse B-spline neural network model. Furthermore, during the data communication phase, the decision-directed LS channel estimation is adopted to track the time-varying CIR. Extensive simulation results demonstrate the effectiveness of our proposed B-Spline neural network based nonlinear equalization scheme.

Image indexing and retrieval using an ART-2A neural network architecture

Traditional content-based image retrieval (CBIR) systems use low-level features such as colors, shapes, and textures of images. Although, users make queries based on semantics, which are not easily related to such low-level characteristics. Recent works on CBIR confirm that researchers have been trying to map visual low-level characteristics and high-level semantics. The relation between low-level characteristics and image textual information has motivated this article which proposes a model for automatic classification and categorization of words associated to images. This proposal considers a self-organizing neural network architecture, which classifies textual information without previous learning. Experimental results compare the performance results of the text-based approach to an image retrieval system based on low-level features. (c) 2008 Wiley Periodicals, Inc.

The influence of ARIMA-GARCH parameters in feed forward neural networks prediction

The objective of this article is to find out the influence of the parameters of the ARIMA-GARCH models in the prediction of artificial neural networks (ANN) of the feed forward type, trained with the Levenberg-Marquardt algorithm, through Monte Carlo simulations. The paper presents a study of the relationship between ANN performance and ARIMA-GARCH model parameters, i.e. the fact that depending on the stationarity and other parameters of the time series, the ANN structure should be selected differently. Neural networks have been widely used to predict time series and their capacity for dealing with non-linearities is a normally outstanding advantage. However, the values of the parameters of the models of generalized autoregressive conditional heteroscedasticity have an influence on ANN prediction performance. The combination of the values of the GARCH parameters with the ARIMA autoregressive terms also implies in ANN performance variation. Combining the parameters of the ARIMA-GARCH models and changing the ANN`s topologies, we used the Theil inequality coefficient to measure the prediction of the feed forward ANN.

Cold rolling mill thickness control using the cascade-correlation neural network

The improvements in thickness accuracy of a steel strip produced by a tandem cold-roIling mill are of substantial interest to the steel industry. In this paper, we designed a direct model-reference adaptive control (MRAC)  scheme that exploits the natural level of excitation existing in the closed-loop with a dynamically constructed cascade-correlation neural network (CCNN) as a controller for cold roIling mill thickness control. Simulation results show that the combination of a such a direct MRAC scheme and the dynamically constructed CCNN significantly improves the thickness accuracy in the presence of disturbances and noise in comparison with to the conventional PID controllers.

Predicting the pilling tendency of wool knits

This work investigates the application of artificial neural network modeling (ANN) to model the relationships between fiber, yarn, and fabric properties and the pilling propensity of single jersey and rib pure wool knitted fabrics based on the ICI Pilling Box method. Validation of the model on an independent validation data set suggests that the accurate prediction of pilling propensity is possible with the best performing model achieving a correlation with the subjectively rated pilling grades of approximately 85%. Importantly, it is also illustrated that a larger training set can lead to a marked improvement in the accuracy of predictions.

Uncontrolled face recognition by individual stable neural network

There usually exist diverse variations in face images taken under uncontrolled conditions. Most previous work on face recognition focuses on particular variations and usually assume the absence of others. Such work is called controlled face recognition. Instead of the ‘divide and conquer’ strategy adopted by controlled face recognition, this paper presents one of the first attempts directly aiming at uncontrolled face recognition. The solution is based on Individual Stable Neural Network (ISNN) proposed in this paper. ISNN can map a face image into the so-called Individual Stable Space (ISS), the feature space that only expresses personal characteristics, which is the only useful information for recognition. There are no restrictions for the face images fed into ISNN. Moreover, unlike many other robust face recognition methods, ISNN does not require any extra information (such as view angle) other than the personal identities during training. These advantages of ISNN make it a very practical approach for uncontrolled face recognition. In the experiments, ISNN is tested on two large face databases with vast variations and achieves the best performance compared with several popular face recognition techniques.

Fault detection in a cold forging process through feature extraction with a neural network

This paper investigates the application of neural networks to the recognition of lubrication defects typical to an industrial cold forging process employed by fastener manufacturers. The accurate recognition of lubrication errors, such as coating not being applied properly or damaged during material handling, is very important to the quality of the final product in fastener manufacture. Lubrication errors lead to increased forging loads and premature tool failure, as well as to increased defect sorting and the re-processing of the coated rod. The lubrication coating provides a barrier between the work material and the die during the drawing operation; moreover it needs be sufficiently robust to remain on the wire during the transfer to the cold forging operation. In the cold forging operation the wire undergoes multi-stage deformation without the application of any additional lubrication. Four types of lubrication errors, typical to production of fasteners, were introduced to a set of sample rods, which were subsequently drawn under laboratory conditions. The drawing force was measured, from which a limited set of features was extracted. The neural network based model learned from these features is able to recognize all types of lubrication errors to a high accuracy. The overall accuracy of the neural network model is around 98% with almost uniform distribution of errors between all four errors and the normal condition.

Improving an inverse model of sheet metal forming by neural network based regression

An inverse model for a sheet meta l forming process aims to determine the initial parameter levels required to form the final formed shape. This is a difficult problem that is usually approached by traditional methods such as finite element analysis. Formulating the problem as a classification problem makes it possible to use well established classification algorithms, such as decision trees. Classification is, however, generally based on a winner-takes-all approach when associating the output value with the corresponding class. On the other hand, when formulating the problem as a regression task, all the output values are combined to produce the corresponding class value. For a multi-class problem, this may result in very different associations compared with classification between the output of the model and the corresponding class. Such formulation makes it possible to use well known regression algorithms, such as neural networks. In this paper, we develop a neural network based inverse model of a sheet forming process, and compare its performance with that of a linear model. Both models are used in two modes, classification mode and a function estimation mode, to investigate the advantage of re-formulating the problem as a function estimation. This results in large improvements in the recognition rate of set-up parameters of a sheet metal forming process for both models, with a neural network model achieving much more accurate parameter recognition than a linear model.

Global optimisation of neural networks using a deterministic hybrid approach

Selection of the topology of a neural network and correct parameters for the learning algorithm is a tedious task for designing an optimal artificial neural network, which is smaller, faster and with a better generalization performance. In this paper we introduce a recently developed cutting angle method (a deterministic technique) for global optimization of connection weights. Neural networks are initially trained using the cutting angle method and later the learning is fine-tuned (meta-learning) using conventional gradient descent or other optimization techniques. Experiments were carried out on three time series benchmarks and a comparison was done using evolutionary neural networks. Our preliminary experimentation results show that the proposed deterministic approach could provide near optimal results much faster than the evolutionary approach.