Socioeconomic causes of loss of animal genetic diversity: analysis and assessment

The proximate causes and processes involved in loss of breeds are outlined. The path-dependent effect and Swanson's dominance-effect are discussed in relation to lock-in of breed selection. These effects help to explain genetic erosion. It is shown that the extension of markets and economic globalisation have contributed significantly to the loss of breeds. The decoupling of animal husbandry from surrounding natural environmental conditions is further eroding the stock of genetic resources. Recent trends in animal husbandry raise serious sustainability issues, apart from animal welfare concerns. The extension of markets and economic globalisation have contributed significantly to the rapid loss of domestic breeds, especially livestock. (C) 2003 Elsevier Science B.V. All rights reserved.

Sulfadoxine resistance in Plasmodium vivax is associated with a specific amino acid in dihydropteroate synthase at the putative sulfadoxine-binding site

Sulfadoxine is predominantly used in combination with pyrimethamine, commonly known as Fansidar, for the treatment of Plasmodium falciparum. This combination is usually less effective against Plasmodium vivax, probably due to the innate refractoriness of parasites to the sulfadoxine component. To investigate this mechanism of resistance by P. vivax to sulfadoxine, we cloned and sequenced the P. vivax dhps (pvdhps) gene. The protein sequence was determined, and three-dimensional homology models of dihydropteroate synthase (DHPS) from P. vivax as well as P. falciparum were created. The docking of sulfadoxine to the two DHPS models allowed us to compare contact residues in the putative sulfadoxine-binding site in both species. The predicted sulfadoxine-binding sites between the species differ by one residue, V585 in P. vivax, equivalent to A613 in P. falciparum. V585 in P. vivax is predicted by energy minimization to cause a reduction in binding of sulfadoxine to DHPS in P. vivax compared to P. falciparum. Sequencing dhps genes from a limited set of geographically different P. vivax isolates revealed that V585 was present in all of the samples, suggesting that V585 may be responsible for innate resistance of P. vivax to sulfadoxine. Additionally, amino acid mutations were observed in some P. vivax isolates in positions known to cause resistance in P. falciparum, suggesting that, as in P. falciparum, these mutations are responsible for acquired increases in resistance of P. vivax to sulfadoxine.

The impact of prolonged fasting during aestivation on the structure of the small intestine in the green-striped burrowing frog, Cyclorana alboguttata

The effects of short-term fasting and prolonged fasting during aestivation on the morphology of the proximal small intestine and associated organs were investigated in the green-striped burrowing frog, Cyclorana alboguttata (Anura: Hylidae). Animals were fasted for 1 week while active or for 3-9 months during aestivation. Short-duration fasting (1 week) had little effect on the morphology of the small intestine, whilst prolonged fasting during aestivation induced marked enteropathy including reductions in intestinal mass, length and diameter, longitudinal fold height and tunica muscularis thickness. Enterocyte morphology was also affected markedly by prolonged fasting: enterocyte cross-sectional area and microvillous height were reduced during aestivation, intercellular spaces were visibly reduced and the prevalence of lymphocytes amongst enterocytes was increased. Mitochondria and nuclei were also affected by 9 months of aestivation with major disruptions to mitochondrial cristae and increased clumping of nuclear material and increased infolding of the nuclear envelope. The present study demonstrates that the intestine of an aestivating frog responds to prolonged food deprivation during aestivation by reducing in size, presumably to reduce the energy expenditure of the organ.

Rev-erb beta regulates the expression of genes involved in lipid absorption in skeletal muscle cells - Evidence for cross-talk between orphan nuclear receptors and myokines

Rev-erbbeta is an orphan nuclear receptor that selectively blocks trans-activation mediated by the retinoic acid-related orphan receptor-alpha (RORalpha). RORalpha has been implicated in the regulation of high density lipoprotein cholesterol, lipid homeostasis, and inflammation. Rev-erbbeta and RORalpha are expressed in similar tissues, including skeletal muscle; however, the pathophysiological function of Rev-erbbeta has remained obscure. We hypothesize from the similar expression patterns, target genes, and overlapping cognate sequences of these nuclear receptors that Rev-erbbeta regulates lipid metabolism in skeletal muscle. This lean tissue accounts for > 30% of total body weight and 50% of energy expenditure. Moreover, this metabolically demanding tissue is a primary site of glucose disposal, fatty acid oxidation, and cholesterol efflux. Consequently, muscle has a significant role in insulin sensitivity, obesity, and the blood-lipid profile. We utilize ectopic expression in skeletal muscle cells to understand the regulatory role of Rev-erbbeta in this major mass peripheral tissue. Exogenous expression of a dominant negative version of mouse Rev-erbbeta decreases the expression of many genes involved in fatty acid/lipid absorption (including Cd36, and Fabp-3 and -4). Interestingly, we observed a robust induction (> 15-fold) in mRNA expression of interleukin-6, an exercise-induced myokine that regulates energy expenditure and inflammation. Furthermore, we observed the dramatic repression (> 20- fold) of myostatin mRNA, another myokine that is a negative regulator of muscle hypertrophy and hyperplasia that impacts on body fat accumulation. This study implicates Rev-erbbeta in the control of lipid and energy homoeostasis in skeletal muscle. In conclusion, we speculate that selective modulators of Rev-erbbeta may have therapeutic utility in the treatment of dyslipidemia and regulation of muscle growth.

Public opinion of a proposed wind farm situated close to a populated area in New Zealand: Results from a cross-sectional study

In accordance with New Zealand���s Resource Management Act 1991, in 2003, electricity generating company Genesis Energy made public its intention to apply for consent to build the Awhitu wind farm. Several community groups claiming to represent the majority opposed this application and in September 2004 consent was declined. The aim was to investigate the attitudes of local community members to the proposed wind farm. A survey was mailed to 500 Franklin residents, systematically selected from the local 2004/2005 telephone directory. Forty questionnaires were returned undelivered. Of the remaining 460, completed questionnaires were returned from 46% (211). Most, 70% (145), residents supported a wind farm being built in their area, with 17% (35) neutral, and only 13% (28) against the farm. There was no statistical difference in respondents��� attitudes between sex, age, or residential proximity to the farm. Respondents listed renewable resource (83%), suitability (78%), and environmental friendliness (76%) as main advantages. Visual unsightliness (24%) and noise pollution (21%) were listed as main perceived disadvantages. Contrary to the assertions of several lobby groups, the majority of local residents support the construction of the Awhitu wind farm. Scientifically robust methods are essential to measure appropriately community attitudes, particularly on contentious issues.

Anodizing treatments for magnesium alloys and their effecton corrosion resistance in various environments

This paper reviews various aspects of anodizing of magnesium alloys, such as the basics, processes, properties and applications. It systematically summarises the existing fundamental studies and technical developments of anodizing of magnesium alloys, and concludes that new anodizing processes based on electrolytic plasma anodizing that convert the surface of a magnesium alloy into a hard ceramic coating in an electrolytic bath using high energy electric discharges can offer improved wear and corrosion resistance. These new anodized coatings are often claimed to perform better than the traditional ones obtained through older anodizing processes, such as DOW17 or HAE. The new anodizing techniques are chromate free and hence environment friendly. It is expected that more cost-effective, environment-friendly and non-toxic anodizing techniques will be developed and applied to magnesium alloy components in the future.

Pain relief for neonates in Australian hospitals: A need to improve evidence-based practice

Objective: To ascertain the extent to which neonatal analgesia was used in Australia for minor invasive procedures as an indicator of evidence-based practice in neonatology. Methods: A cross-sectional telephone survey of hospitals in all Australian states and territories with more than 200 deliveries per year was carried out. Questions were asked regarding awareness of the benefits and the use of analgesia for minor invasive procedures in term and near term neonates. Analysis was undertaken according to state and territory, annual birth numbers and the level of neonatal nursery care available. Results: Data were available from 212 of 214 eligible hospitals. Of the total respondents, 51% and 70% respectively were aware of the benefits of sucrose and breast-feeding for neonatal analgesia. Eleven per cent of units administered sucrose before venepuncture and 25% of units used breast-feeding. Ten per cent of units used sucrose before heel prick with 49% utilizing breast-feeding. Expressed breast milk was used in 10% of units. Analgesia was given less frequently before intravenous cannulation compared to venepuncture and heel prick. Awareness and implementation of neonatal analgesia varied widely in the states and territories. There was a trend for hospitals providing a higher level of neonatal care to have a greater awareness of sucrose as an analgesic (P < 0.0001) and the use of sucrose for venepuncture (P = 0.029), heel prick (P = 0.025) and intravenous catheter insertion (P = 0.013). Similar trends were found on analysis according to birth number of the maternity units. Smaller units had a greater usage of breast-feeding as an analgesic for heel prick (P = 0.017). Conclusion: Despite good evidence for the administration of sucrose and breast milk in providing effective analgesia for newborn infants, it is not widely used in Australia. It is imperative that the gap between research findings and clinical practice with regard to neonatal analgesia be addressed.

Swash-aquifer interaction in the vicinity of the water table exit point on a sandy beach

The coupling of sandy beach aquifers with the swash zone in the vicinity of the water table exit point is investigated through simultaneous measurements of the instantaneous shoreline (swash front) location, pore pressures and the water table exit point. The field observations reveal new insights into swash-aquifer coupling not previously gleaned from measurements of pore pressure only. In particular, for the case where the exit point is seaward of the observation point, the pore pressure response is correlated with the distance between the exit point and the shoreline in that when the distance is large the rate of pressure drop is fast and when the distance is small the rate decreases. The observations expose limitations in a simple model describing exit point dynamics which is based only on the force balance on a particle of water at the sand surface and neglects subsurface pressures. A new modified form of the model is shown to significantly improve the model-data comparison through a parameterization of the effects of capillarity into the aquifer storage coefficient. The model enables sufficiently accurate predictions of the exit point to determine when the swash uprush propagates over a saturated or a partially saturated sand surface, potentially an important factor in the morphological evolution of the beach face. Observations of the shoreward propagation of the swash-induced pore pressure waves ahead of the runup limit shows that the magnitude of the pressure fluctuation decays exponentially and that there is a linear increase in time lags, behavior similar to that of tidally induced water table waves. The location of the exit point and the intermittency of wave runup events is also shown to be significant in terms of the shore-normal energy distribution. Seaward of the mean exit point location, peak energies are small because of the saturated sand surface within the seepage face acting as a "rigid lid'' and limiting pressure fluctuations. Landward of the mean exit point the peak energies grow before decreasing landward of the maximum shoreline position.

Caratterizzazione delle Prestazioni di Protezione al Fuoco di Vernici Intumescenti

Le pitture intumescenti sono utilizzate come protettivi passivi antincendio nel settore delle costruzioni. In particolare sono utilizzate per aumentare la resistenza al fuoco di elementi in acciaio. Le propriet�� termiche di questi rivestimenti sono spesso sconosciute o difficili da stimare per via del fatto che variano notevolmente durante il processo di espansione che subisce l���intumescente quando esposto al calore di un incendio. Per questa ragione la validazione della resistenza al fuoco di un rivestimento presente in commercio si basa su metodi costosi economicamente e come tempi di esecuzione nel quale ciascuna trave e colonna rivestita di protettivo deve essere testata una alla volta attraverso il test di resistenza al fuoco della curva cellulosica. In questo lavoro di tesi adottando invece un approccio basato sulla modellazione termica del rivestimento intumescente si ottiene un aiuto nella semplificazione della procedura di test ed un supporto nella progettazione della resistenza al fuoco delle strutture. Il tratto di unione nei vari passaggi della presente tesi �� stata la metodologia di stima del comportamento termico sconosciuto, tale metodologia di stima �� la ���Inverse Parameter Estimation���. Nella prima fase vi �� stata la caratterizzazione chimico fisica della vernice per mezzo di differenti apparecchiature come la DSC, la TGA e l���FT-IR che ci hanno permesso di ottenere la composizione qualitativa e le temperature a cui avvengono i principali processi chimici e fisici che subisce la pittura come anche le entalpie legate a questi eventi. Nella seconda fase si �� proceduto alla caratterizzazione termica delle pitture al fine di ottenerne il valore di conduttivit�� termica equivalente. A tale scopo si sono prima utilizzate le temperature dell���acciaio di prove termiche alla fornace con riscaldamento secondo lo standard ISO-834 e successivamente per meglio definire le condizioni al contorno si �� presa come fonte di calore un cono calorimetrico in cui la misura della temperatura avveniva direttamente nello spessore del���intumescente. I valori di conduttivit�� ottenuti sono risultati congruenti con la letteratura scientifica e hanno mostrato la dipendenza della stessa dalla temperatura, mentre si �� mostrata poco variante rispetto allo spessore di vernice deposto ed alla geometria di campione utilizzato.

Knowledge management in the energy sector:review and future directions

Purpose ��� The purpose of this paper is to examine the state of knowledge management (KM) in the energy sector and more broadly, and consider future directions for research and practice. Design/methodology/approach ��� The paper reviews the literature on KM and the practice of KM as relevant to the energy sector. Findings ��� There are many examples of good practice in KM in the sector, and some organisations, especially in the oil industry, are seen as leaders in KM practice. However, other organisations have yet to embark on explicit KM initiatives or projects at all. In addition, some parts of the energy sector discuss KM without any reference to the more general KM literature. Originality/value ��� Although some parts of the energy sector have justifiably earned a good reputation for KM, other parts are completely unaware of the field, as is apparent from the literature. This review helps to raise awareness and guide future work.

Creation of relational assets through the 'library of equipment' model:an industrial modernization approach of Japan's local technology centres

SMEs with a weak internal R&D capacity show the tendency to shy away from using external sources of technical expertise. The tendency deters providers of industrial modernization services from supporting such structurally weak SMEs. This paper examines how Japan's local technology centres - kosetsushi - remove the bottleneck and reach out to a significant proportion of SMEs with a weak R&D capacity in their localities. Kosetsushi centres sustain habitual interactions with client firms through 'low information gap' services solving immediate needs and lead the clients to a riskier and longer path toward innovation capacity building. This gives kosetsushi centres a position distinct from universities and consultancies in the regional innovation system. While long-term relationships between kosetsushi centres and their client firms can increase switching costs and produce lock-in effects, a case study of two kosetsushi centres illustrates the importance of 'low-information gap' services and relational assets created thereby to the modernization of SMEs with a weak internal R&D capacity. The paper calls for long-term commitment by the public sector if it addresses the issue through modernization services.

Antidiabetic properties of zinc-alpha2-glycoprotein in ob/ob mice

Zinc-alpha(2)-glycoprotein (ZAG) is an adipokine associated with fat loss in cancer cachexia. The purpose of this study was to evaluate the ability of recombinant human ZAG to attenuate type 2 diabetes in the ob/ob mouse model. ZAG (50 microg daily, iv) induced a progressive loss of body weight (3.5 g in 5 d), without an effect on food or water intake but with a 0.4 C rise in body temperature, suggesting an increased energy expenditure. Despite an increased plasma glycerol, indicative of increased lipolysis, levels of glucose, triglycerides, and nonesterified fatty acids were decreased by 17, 25, and 62%, respectively, due to an increased use of both glucose and lipids by muscle and brown adipose tissue. The weight of the latter increased 2-fold, and there was increased expression of uncoupling proteins-1 and -3. Plasma insulin levels were reduced by 36%, whereas pancreatic insulin was increased 4-fold, and there was a 53% decrease in the total area under the glucose curve in the glucose tolerance test and reduced insulin requirement. There was an increase in skeletal muscle mass due to an increase in protein synthesis and a decrease in protein degradation. These results suggest that ZAG may potentially be effective in the treatment of type 2 diabetes.

A study in the application of domestic solar assisted heat pumps for heating and cooling

In the present work, the more important parameters of the heat pump system and of solar assisted heat pump systems were analysed in a quantitative way. Ideal and real Rankine cycles applied to the heat pump, with and without subcooling and superheating were studied using practical recommended values for their thermodynamics parameters. Comparative characteristics of refrigerants here analysed looking for their applicability in heat pumps for domestic heating and their effect in the performance of the system. Curves for the variation of the coefficient of performance as a function of condensing and evaporating temperatures were prepared for R12. Air, water and earth as low-grade heat sources and basic heat pump design factors for integrated heat pumps and thermal stores and for solar assisted heat pump-series, parallel and dual-systems were studied. The analysis of the relative performance of these systems demonstrated that the dual system presents advantages in domestic applications. An account of energy requirements for space and hater heating in the domestic sector in the O.K. is presented. The expected primary energy savings by using heat pumps to provide for the heating demand of the domestic sector was found to be of the order of 7%. The availability of solar energy in the U.K. climatic conditions and the characteristics of the solar radiation here studied. Tables and graphical representations in order to calculate the incident solar radiation over a tilted roof were prepared and are given in this study in section IV. In order to analyse and calculate the heating load for the system, new mathematical and graphical relations were developed in section V. A domestic space and water heating system is described and studied. It comprises three main components: a solar radiation absorber, the normal roof of a house, a split heat pump and a thermal store. A mathematical study of the heat exchange characteristics in the roof structure was done. This permits to evaluate the energy collected by the roof acting as a radiation absorber and its efficiency. An indication of the relative contributions from the three low-grade sources: ambient air, solar boost and heat loss from the house to the roof space during operation is given in section VI, together with the average seasonal performance and the energy saving for a prototype system tested at the University of Aston. The seasonal performance as found to be 2.6 and the energy savings by using the system studied 61%. A new store configuration to reduce wasted heat losses is also discussed in section VI.

Continuous-wave ultraviolet light induced fiber Bragg gratings in few- and single-mode microstructured polymer optical fibers

Reported are observations and measurements of the inscription of fibre Bragg gratings in two different types of microstructured polymer optical fibre: few-moded and endlessly single mode. Contrary to FBG inscription in silica microstructured fibre, where high energy laser pulses are a prerequisite, we have successfully used a low power CW laser source operating at 325nm to produce 1-cm long gratings with a reflection peak at 1570 nm. Peak reflectivities of more than 10% have been observed.

Investigation of the effects of low energy high dose ion bombardment in metals and compound semiconductors

The effect of low energy nitrogen molecular ion beam bombardment on metals and compound semiconductors has been studied, with the aim to investigate at the effects of ion and target properties. For this purpose, nitrogen ion implantation in aluminium, iron, copper, gold, GaAs and AIGaAs is studied using XPS and Angle Resolve XPS. A series of experimental studies on N+2 bombardment induced compositional changes, especially the amount of nitrogen retained in the target, were accomplished. Both monoenergetic implantation and non-monoenergetic ion implantation were investigated, using the VG Scientific ESCALAB 200D system and a d. c. plasma cell, respectively. When the samples, with the exception of gold, are exposed to air, native oxide layers are formed on the surfaces. In the case of monoenergetic implantation, the surfaces were cleaned using Ar+ beam bombardment prior to implantation. The materials were then bombarded with N2+ beam and eight sets of successful experiments were performed on each sample, using a rastered N2+ ion beam of energy of 2, 3, 4 and 5 keV with current densities of 1 ��A/cm2 and 5 ��A/cm22 for each energy. The bombarded samples were examined by ARXPS. After each complete implantation, XPS depth profiles were created using Ar+ beam at energy 2 ke V and current density 2 ��A/cm2 . As the current density was chosen as one of the parameters, accurate determination of current density was very important. In the case of glow discharge, two sets of successful experiments were performed in each case, by exposing the samples to nitrogen plasma for the two conditions: at low pressure and high voltage and high pressure and low voltage. These samples were then examined by ARXPS. On the theoretical side, the major problem was prediction of the number of ions of an element that can be implanted in a given matrix. Although the programme is essentially on experimental study, but an attempt is being made to understand the current theoretical models, such as SATVAL, SUSPRE and TRIM. The experimental results were compared with theoretical predictions, in order to gain a better understanding of the mechanisms responsible. From the experimental results, considering possible experimental uncertainties, there is no evidence of significant variation in nitrogen saturation concentration with ion energy or ion current density in the range of 2-5 ke V, however, the retention characteristics of implantant seem to strongly depend on the chemical reactivity between ion species and target material. The experimental data suggests the presence of at least one thermal process. The discrepancy between the theoretical and experimental results could be the inability of the codes to account for molecular ion impact and thermal processes.