SGLT inhibitors in management of diabetes

The two main sodium-glucose cotransporters (SGLTs), SGLT1 and SGLT2, provide new therapeutic targets to reduce hyperglycaemia in patients with diabetes. SGLT1 enables the small intestine to absorb glucose and contributes to the reabsorption of glucose filtered by the kidney. SGLT2 is responsible for reabsorption of most of the glucose filtered by the kidney. Inhibitors with varying specificities for these transporters (eg, dapagliflozin, canagliflozin, and empagliflozin) can slow the rate of intestinal glucose absorption and increase the renal elimination of glucose into the urine. Results of randomised clinical trials have shown the blood glucose-lowering efficacy of SGLT inhibitors in type 2 diabetes when administered as monotherapy or in addition to other glucose-lowering therapies including insulin. Increased renal glucose elimination also assists weight loss and could help to reduce blood pressure. Effective SGLT2 inhibition needs adequate glomerular filtration and might increase risk of urinary tract and genital infection, and excessive inhibition of SGLT1 can cause gastro-intestinal symptoms. However, the insulin-independent mechanism of action of SGLT inhibitors seems to offer durable glucose-lowering efficacy with low risk of clinically significant hypoglycaemia at any stage in the natural history of type 2 diabetes. SGLT inhibition might also be considered in conjunction with insulin therapy in type 1 diabetes. © 2013 Elsevier Ltd.

Cortical dynamics and synchronization related to multiple target consolidation under rapid-serial-visual-presentation conditions

The present report reviews behavioural, electroencephalographic, and especially magnetoencephalographic findings on the cortical mechanisms underlying attentional processes that separate targets from distractors and that ensure durable target representations for goal-directed action. A common way of investigation is to observe the system’s overt and covert behaviour when capacity limitations are reached. Here we focus on the aspect of temporally enhanced processing load, namely on performance deficits occurring under rapid-serial-visual-presentation (RSVP) conditions. The most prominent of these deficits is the so-called “attentional blink” (AB) effect. We first report MEG findings with respect to the time course of activation that shows modulations around 300 ms after target onset which reflect demands and success of target consolidation. Then, findings regarding long-range inter-area phase synchronization are reported that are hypothesized to mediate communication within the attentional network. Changes in synchronization reflect changes in the attentional demands of the task and are directly related to behavioural performance. Furthermore, enhanced vigilance of the system elicits systematically increased synchronization indices. A hypothetical framework is sketched out that aims at explaining limitations in multiple target consolidation under RSVP conditions.

The icephobic performance of alkyl-grafted aluminum surfaces

This work analyzes the anti-icing performance of flat aluminum surfaces coated with widely used alkyl-group based layers of octadecyltrimethoxysilane, fluorinated alkylsilane and stearic acid as they are subjected to repeated icing/deicing cycles. The wetting properties of the samples upon long-term immersion in water are also evaluated. The results demonstrate that smooth aluminum surfaces grafted with alkyl groups are prone to gradual degradation of their hydrophobic and icephobic properties, which is caused by interactions and reactions with both ice and liquid water. This implies that alkyl-group based monolayers on aluminum surfaces are not likely to be durable icephobic coatings unless their durability in contact with ice and/or water is significantly improved.

A szovjetológiától az új intézményi közgazdaságtanig - töprengések két évtized távlatából = From Sovietology to the new institutional economics - meditations from a distance of two decades

A következőkben arra teszünk kísérletet, hogy összegezzük a közép- és a kelet-európai rendszerváltozások és az ezt tanulmányozók fordulatos történetét az elmúlt két évtizedben. Bemutatjuk, hogy a közgazdaságtan egy kevéssé fejlett ága miképp szembesült a tudományág egésze szempontjából is talán legnehezebb értelmezési és alkalmazási kérdéseket fölvető történelmi folyamattal. Megpróbáljuk feloldani azt a rejtvényt, hogy a főáramú megközelítés megismerése és alkalmazása miért nem hozott átütő eredményt sem a térség gazdaságainak, sem magának a tudományszaknak. Megvizsgáljuk a fokozatosság és a reformok kritikus tömege viszonyát. Végül kísérletet teszünk arra, hogy e sajátos szakterület elemzéséből adódó, tartósnak bizonyuló tételeket beépítsük a fenntartható fejlődés szélesebben értelmezett, immár főáramú megközelítéseibe. ___________ The article attempts to give an account of the changes of system in Central and Eastern Europe and of those who studied them in the last two decades. It shows how a less devel-oped branch of economics faced a historical process that posed possibly the most difficult questions of interpretation and application for the whole discipline. An attempt is made to discover why recognition and application of the mainstream approach failed to bring resounding success for the economies of the region or for economics itself. The author examines the relation between continuity and the critical weight of reforms. Finally, an attempt is made to advance durable propositions based on analysis of this specific field through now mainstream approaches in terms of sustainable development.

Negotiating identities, striving for state recognition: Blacks in Córdoba, Argentina 1776–1853

Race in Argentina played a significant role as a highly durable construct by identifying and advancing subjects (1776–1810) and citizens (1811–1853). My dissertation explores the intricacies of power relations by focusing on the ways in which race informed the legal process during the transition from a colonial to national State. It argues that the State’s development in both the colonial and national periods depended upon defining and classifying African descendants. In response, people of African descendent used the State’s assigned definitions and classifications to advance their legal identities. It employs race and culture as operative concepts, and law as a representation of the sometimes, tense relationship between social practices and the State’s concern for social peace. This dissertation examines the dynamic nature of the court. It utilizes the theoretical concepts multicentric legal orders that are analyzed through weak and strong legal pluralisms, and jurisdictional politics, from the late eighteenth to early nineteenth centuries. This dissertation juxtaposes various levels of jurisdiction (canon/state law and colonial/national law) to illuminate how people of color used the legal system to ameliorate their social condition. In each chapter the primary source materials are state generated documents which include criminal, ecclesiastical, civil, and marriage dissent court cases along with notarial and census records. Though it would appear that these documents would provide a superficial understanding of people of color, my analysis provides both a top-down and bottom-up approach that reflects a continuous negotiation for African descendants’ goal for State recognition. These approaches allow for implicit or explicit negotiation of a legal identity that transformed slaves and free African descendants into active agents of their own destinies.

Enhanced anchorage of tissue-engineered cartilage using an osteoinductive approach

Articular cartilage injuries occur frequently in the knee joint. Several methods have been implemented clinically, to treat osteochondral defects but none have been able to produce a long term, durable solution. Photopolymerizable cartilage tissue engineering approaches appear promising; however, fundamentally, forming a stable interface between the tissue engineered cartilage and native tissue, mainly subchondral bone and native cartilage, remains a major challenge. The overall objective of this research is to find a solution for the current problem of dislodgment of tissue engineered cartilage at the defect site for the treatment of degraded cartilage that has been caused due to knee injuries or because of mild to moderate level of osteoarthritis. For this, an in-vitro model was created to analyze the integration of tissue engineered cartilage with the bone, healthy and diseased cartilage over time. We investigated the utility of hydroxyapatite (HA) nanoparticles to promote controlled bone-growth across the bone-cartilage interface in an in vitro engineered tissue model system using bone marrow derived stem cells. We also investigated the application of HA nanoparticles to promote enhance integration between tissue engineered cartilage and native cartilage both in healthy and diseased states. Samples incorporated with HA demonstrated significantly higher interfacial shear strength (at the junction between engineered cartilage and engineered bone and also with diseased cartilage) compared to the constructs without HA (p < 0.05), after 28 days of culture. These findings indicate that the incorporation of HA nanoparticles permits more stable anchorage of the injectable hydrogel-based engineered cartilage construct via augmented integration between bone and cartilage.^

Biocompatibility assessment of biosorbable polymer coated nitinol alloys

Owing to an increased risk of aging population and a higher incidence of coronary artery disease (CAD), there is a need for more reliable and safer treatments. Numerous varieties of durable polymer-coated drug eluting stents (DES) are available in the market in order to mitigate in-stent restenosis. However, there are certain issues regarding their usage such as delayed arterial healing, thrombosis, inflammation, toxic corrosion by-products, mechanical stability and degradation. As a result, significant amount of research has to be devoted to the improvement of biodegradable polymer-coated implant materials in an effort to enhance their bioactive response. ^ In this investigation, magneto-electropolished (MEP) and a novel biodegradable polymer coated ternary Nitinol alloys, NiTiTa and NiTiCr were prepared to study their bio and hemocompatibility properties. The initial interaction of a biomaterial with its surroundings is dependent on its surface characteristics such as, composition, corrosion resistance, work of adhesion and morphology. In-vitro corrosion tests such as potentiodynamic polarization and electrochemical impedance spectroscopic (EIS) studies were conducted to determine the coating stability and longevity. In-vitro hemocompatibility studies and HUVEC cell growth was performed to determine their thrombogenic and biocompatibility properties. Critical delamination load of the polymer coated Nitinol alloys was determined using Nano-scratch analysis. Sulforhodamine B (SRB) assays were performed to elucidate the effect of metal ions leached from Nitinol alloys on the viability of HUVEC cells. Scanning Electron Microscopy (SEM), X-ray Photoelectron Spectroscopy (XPS), contact angle meter and X-ray diffraction (XRD) were used to characterize the surface of the alloys. ^ MEP treated and polymer coated (PC) Nitinol alloys displayed a corrosion resistant polymer coating as compared to uncoated alloys. MEP and PC has resulted in reduced Ni and Cr ion leaching from NiTi5Cr and subsequently low cytotoxicity. Thrombogenicity tests revealed significantly less platelet adhesion and confluent endothelial cell growth on polymer coated and uncoated ternary MEP Nitinol alloys. Finally, this research addresses the bio and hemocompatibility of MEP + PC ternary Nitinol alloys that could be used to manufacture blood contacting devices such as stents and vascular implants which can lead to lower U.S. healthcare spending.^

A Cross-Generational Analysis of Spanish-to-English Lexico-Semantic Phenomena in Emerging Miami English

Sociolinguists have documented the substrate influence of various languages on the formation of dialects in numerous ethnic-regional setting throughout the United States. This literature shows that while phonological and grammatical influences from other languages may be instantiated as durable dialect features, lexical phenomena often fade over time as ethnolinguistic communities assimilate with contiguous dialect groups. In preliminary investigations of emerging Miami Latino English, we have observed that lexical forms based on Spanish lexical forms are not only ubiquitous among the speech of the first generation Cuban Americans but also of the second. Examples, observed in field work, casual observation, and studied formally in an experimental context include the following: “get down from the car,” which derives from the Spanish equivalent, bajar del carro instead of “get out of the car”. The translation task administered to thirty-one participants showed a variety lexical phenomena are still maintained at equal or higher frequencies.

Race Relations & Politics in Venezuela during Punto Fijo (1958 – 1998)

In 1998, Hugo Chávez Frías’ presidential candidacy brought race to national discussion in Venezuela for first time since 1945. For long, the country’s politics had abided by the myth of racial harmony and racial democracy. This approach pointed to institutional separation in the United States and Africa as examples of true racism. Latin America was largely void of such atrocities. Nonetheless, Chávez claimed the present political parties (Acción Democrática, Copei and Unión Republicana Democrática) disenfranchised the common, colored Venezuelan. He continued to assert the opposition’s racism during his presidency. And his political fanbase agrees. A variety of scholars have studied the break from Punto Fijo politics to the Bolivarian Revolution. Yet, few have linked the obvious class struggle to race. Here, I seek to explain how racial identity has shaped class identity in Venezuela by closely examining the Punto Fijo era (1958-1998). The essay begins with an overview of historical race relations, moving to the period in focus. Then, I examine systematic and institutional exclusion under Punto Fijo politics. The object is to understand the merit of Chávez’s racial claims since 1998. Hence, the study also sees democracy in action and the consequences of racial exclusion. The study will be accomplished through secondary research, considering the limitations brought by working abroad. In the end, this study serves as first step in analyzing the fall of what was once considered Latin America’s most durable democracy.

Race Relations & Politics in Venezuela during Punto Fijo (1958 – 1998)

In 1998, Hugo Chávez Frías’ presidential candidacy brought race to national discussion in Venezuela for first time since 1945. For long, the country’s politics had abided by the myth of racial harmony and racial democracy. This approach pointed to institutional separation in the United States and Africa as examples of true racism. Latin America was largely void of such atrocities. Nonetheless, Chávez claimed the present political parties (Acción Democrática, Copei and Unión Republicana Democrática) disenfranchised the common, colored Venezuelan. He continued to assert the opposition’s racism during his presidency. And his political fanbase agrees. A variety of scholars have studied the break from Punto Fijo politics to the Bolivarian Revolution. Yet, few have linked the obvious class struggle to race. Here, I seek to explain how racial identity has shaped class identity in Venezuela by closely examining the Punto Fijo era (1958-1998). The essay begins with an overview of historical race relations, moving to the period in focus. Then, I examine systematic and institutional exclusion under Punto Fijo politics. The object is to understand the merit of Chávez’s racial claims since 1998. Hence, the study also sees democracy in action and the consequences of racial exclusion. The study will be accomplished through secondary research, considering the limitations brought by working abroad. In the end, this study serves as first step in analyzing the fall of what was once considered Latin America’s most durable democracy.

Efeito da moagem de alta energia na densificação e microestrutura do compósito AI2O3-Cu

The Cu-Al2O3 composite ceramic combines the phase of alumina, which is extremely hard and durable, yet very brittle, to metallic copper phase high ductility and high fracture toughness. These characteristics make this material a strong candidate for use as a cutting tool. Al2O3-Cu composite powders nanocrystalline and high homogeneity can be produced by high energy milling, as well as dense and better mechanical structures can be obtained by liquid phase sintering. This work investigates the effect of high-energy milling the dispersion phase Al2O3, Cu, and the influence of the content of Cu in the formation of Cu-Al2O3 composite particles. A planetary mill Pulverisatte 7 high energy was used to perform the experiments grinding. Al2O3 powder and Cu in the proportion of 5, 10 and 15% by weight of Cu were placed in a container for grinding with balls of hard metal and ethyl alcohol. A mass ratio of balls to powder of 1:5 was used. All powders were milled to 100 hours, and powder samples were collected after 2, 10, 20, 50 and 70 hours of grinding. Composite powders with compact cylindrical shape of 8 mm diameter were pressed and sintered in uniaxial matrix resistive furnace to 1200, 1300 to 1350 °C for 60 minutes under an atmosphere of argon and hydrogen. The heating rate used was 10°C/min. The powders and structures of the sintered bodies were characterized by XRD, SEM and EDS. Analysis TG, DSC and particle size were also used to characterize the milled powders, as well as dilatometry was used to observe the contraction of the sintered bodies. The density of the green and sintered bodies was measured using the geometric method (mass / volume). Vickers microhardness with a load of 500 g for 10 s were performed on sintered structures. The Cu-Al2O3 composite with 5% copper density reached 61% of theoretical density and a hardness of 129 HV when sintered at 1300 ° C for 1h. In contrast, lower densities (59 and 51% of the theoretical density) and hardness (110 HV and 105) were achieved when the copper content increases to 10 and 15%.

The importance of realistic dispersal models in planning for conservation : application of a novel modelling platform to evaluate management scenarios in an Afrotropical biodiversity hotspot

Funded by European Union's Horizon 2020 Marie Sklodowska-Curie. Grant Number: 661211 Research Foundation Flanders (FWO). Grant Numbers: G.0055.08, G.0149.09, G.0308.13 FWO Research Network on Eco-Evolutionary dynamics French Ministère de l'Energie de l'Ecologie du Développement Durable et de la Mer through the EU FP6 BiodivERsA Eranet NERC. Grant Number: NE/J008001/1

Sens et réalités de l'espace public urbain : le degré de conscience des enjeux normatifs

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Exploration des modes d'habiter tels que révélés par une catastrophe

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Étude descriptive de l'environnement des écoliers à l'heure des leçons et des devoirs à la maison

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.