Carbonate content in lower Cretaceous sediments of ODP Hole 123-765C

Sediments recovered during Ocean Drilling Program (ODP) Leg 123 from the Argo Abyssal Plain (AAP) consist largely of turbidites derived from the adjacent Australian continental margin. The oldest abundant turbidites are Valanginian-Aptian in age and have a mixed (smarl) composition; they contain subequal amounts of calcareous and siliceous biogenic components, as well as clay and lesser quartz. Most are thin-bedded, fine sand- to mud-sized, and best described by Stow and Piper's model (1984) for fine-grained biogenic turbidites. Thicker (to 3 m), coarser-grained (medium-to-coarse sand-sized) turbidites fit Bouma's model (1962) for sandy turbidites; these generally are base-cut-out (BCDE, BDE) sequences, with B-division parallel lamination as the dominant structure. Parallel laminae most commonly concentrate quartz and/or calcispheres vs. lithic clasts or clay, but distinctive millimeter- to centimeter-thick, radiolarian-rich laminae occur in both fine- and coarse-grained Valanginian-Hauterivian turbidites. AAP turbidites were derived from relatively deep parts of the continental margin (outer shelf, slope, or rise) that lay below the photic zone, but above the calcite compensation depth (CCD). Biogenic components are largely pelagic (calcispheres, foraminifers, radiolarians, nannofossils); lesser benthic foraminifers are characteristic of deep-water (abyssal to bathyal) environments. Abundant nonbiogenic components are mostly clay and clay clasts; smectite is the dominant clay species, and indicates a volcanogenic provenance, most likely the Triassic-Jurassic volcanic suite exposed along the northern Exmouth Plateau. Lower Cretaceous smarl turbidites were generated during eustatic lowstands and may have reached the abyssal plain via Swan Canyon, a submarine canyon thought to have formed during the Late Jurassic. In contrast to younger AAP turbidites, however, Lower Cretaceous turbidites are relatively fine-grained and do not contain notably older reworked fossils. Early in its history, the northwest Australian margin provided mainly contemporaneous slope sediment to the AAP; marginal basins adjacent to the continent trapped most terrigenous detritus, and pronounced canyon incisement did not occur until Late Cretaceous and, especially, Cenozoic time.

Organic matter preservation in sediments of the Peru and Oman continental margin

Detailed petrographical and bulk geochemical investigations of organic matter (OM) have been performed on sediments deposited below or close to upwelling areas offshore Peru (ODP-Leg 112; Sites 679, 681, 688) and Oman (ODP-Leg 117; Sites 720, 723, 724) in order to obtain a quantitative understanding of its accumulation and degradation. Microscopical as well as nanoscopical investigations reveal that the OM in sediments affected by upwelling mechanisms mainly (up to 98%) consists of unstructured (amorphous) organic aggregates without any apparent biological structures. In sediments which are not or to a lesser extent affected by upwelling (Site 720) terrestrial OM predominates. Organic carbon (TOC) contents are highly variable and range between 9.8% in sediments deposited below upwelling cells and 0.2% in sediments outside the upwelling zone. The TOC/sulphur ratios of the sediments scatter widely. The samples from the deep-water locations (Sites 688 and 720), show C/S-ratios of "normal" marine sediments, whereas at the other locations no correlation or even a negative correlation between sulphur and TOC concentration exists. In most of the upwelling-influenced sediments OM contains a significant amount of sulphur. The incorporation of sulphur into the OM followed microbial sulphate reduction and occurred in the upper meters of the sedimentary column. Below, OM is still present in vast amounts and relatively hydrogen-rich, but is nevertheless non-metabolizable and becomes the limiting factor for bacterial sulphate reduction. According to mass balance calculations 90-99% of the OM produced in the photic zone was remineralized and 1-3% was consumed by microbial sulphate reduction. The aerobic and anaerobic processes have greatly affected degradation and conservation of OM.

Strontium isotopic ages from IODP Exp307

Sr isotope stratigraphy provides a new age model for the first complete section drilled through a deep-water coral mound. The 155-m-long section from Challenger Mound in the Porcupine Sea-bight, southwest of Ireland, is on Miocene siliciclastics and consists entirely of sediments bearing well-preserved cold-water coral Lophelia pertusa. The 87Sr/86Sr values of 28 coral specimens from the mound show an upward-increasing trend, correspond to ages from 2.6 to 0.5 Ma, and identify a significant hiatus from ca. 1.7 to 1.0 Ma at 23.6 m below seafloor. The age of the basal mound sediments coincides with the intensification of Northern Hemisphere glaciations that set up the modern stratification of the northeast Atlantic and enabled coral growth. Mound growth persisted throughout glacial-interglacial fluctuations, reached a maximum rate (24 cm/k.y.) ca. 2.0 Ma, and ceased at 1.7 Ma. Unlike other buried mounds in Porcupine Seabight, Challenger Mound was only partly covered during its growth interruption, and growth restarted ca. 1.0 Ma.

(Table 1) Sulfur isotopes, total sulfur, and degree of oxidation of basalt samples from DSDP Hole 69-504B and 70-504B

About 150 basalt samples from Hole 504B, near the Costa Rica Rift were analyzed for sulfur content and sulfur-isotope composition. The basement in Hole 504B can be divided into an upper part, which has oxidative alteration (274.5-550 m below sea floor), and a lower part, which has nonoxidative alteration (550-835 m below sea floor) (the interval from 540 to 585 meters actually is transitional). This division is reflected in both the sulfur content and the sulfurisotope composition. Oxidative alteration of basalts by sea water at low temperatures has resulted in a depletion in sulfur in the upper part of the hole (mostly less than 600 ppm S) as compared to fresh sulfur-saturated oceanic tholeiites (900-1200 ppm S). High amounts of sulfur in the lower part of the hole are a result of precipitation of secondary pyrite under non-oxidative or weakly oxidative conditions from solutions which dissolved igneous sulfides. The average sulfur-isotope composition of the primary igneous sulfides is d34S = -0.01 per mil, which is close to the assumed mantle sulfur composition (d34S = 0 per mil. Pyrite and sulfate sulfur extracted together in a separate preparation step (as "pyrite-sulfate" sulfur) indicate addition of sea-water sulfate to the upper part of the basalts. The d34S of secondary pyrite isolated by hand-picking varies between -8.0 and +5.8 per mil; the "pyrite-sulfate" sulfur (d34S = -4.8 to +10.5 per mil), as well as that of the isolated pyrite, may have originated in the precipitation of pyrite from solutions containing sulfur from the dissolution of igneous sulfides, but addition of sulfur transported by hydrothermal solutions cannot be excluded.

Calcareous nannofossils in sediments of the Japan Sea

Preliminary results of the biostratigraphic analysis of calcareous nannofossils recovered from Ocean Drilling Program Leg 128, Sites 798 and 799, provide clues to the Quaternary oceanography of the Japan Sea. The distribution of calcareous nannofossils from the Quaternary sediments at Site 798 (903 m water depth) may record the position of an Oceanographic frontal boundary between warm water derived from a branch of the Kuroshio Current as it entered the Japan Sea through the Tsushima Straits to the south, and colder water introduced into the western portion of the Japan Sea derived from the winter chilling of northern Japan Sea surface waters. This Oceanographic front probably oscillated north-south over Site 798 in response to glacial/interglacial cycles, or perhaps to some other climatic event or combination of events unique to the Japan Sea. During the last 1.5 m.y., six major intervals are recognized when the Oceanographic front may have been north of Site 798 separated by five major intervals when the frontal boundary may have been south of the site. These migrations were centered around approximately 0.125, 0.29, 0.56, 0.62, 0.85, 0.91, 0.98, 1.0, 1.11, and 1.5 Ma, which correspond to the boundaries separating nannofossil-rich sediments from barren or nearly barren, low-carbonate intervals. Nannofossil-rich intervals may represent times when the frontal boundary was north of Site 798, and the site was above the CCD. Barren or nearly barren intervals represent times when the frontal boundary may have been south of Site 798 and the CCD was probably higher. The distribution of calcareous nannofossils at Site 799 (2073 m water depth) appears to be controlled more by the depth of the CCD than by any climatic effects. The FOD (first occurrence datum) of Emiliania huxleyi, the LOD (last occurrence datum) of Psuedoemiliania lacunosa, Helicosphaera sellii, Calcidiscus macintyrei (10 ?m), and the FOD and LOD of Reticulofenestra asanoi are recognized from Site 798 cores. The LOD of P. lacunosa is observed in sediments from Site 799. Only in the sediments younger than 1.5 Ma are the nannofossils from Sites 798 and 799 preserved well enough and sufficiently numerous for age dating and paleoceanographic conjecture. In-situ dissolution in older sediments at both sites precludes any dating or paleoenvironmental interpretations.

Carbon and Nitrogen concentrations and isotopic composition of ODP Site 170-1040 and Leg 205 sites

We determined the C and N concentrations and isotopic compositions of sediments in the prism sampled during Ocean Drilling Program Legs 170 and 205 offshore Costa Rica, with the goals of evaluating sediment sources and extents of diagenesis and identifying any effects of infiltrating fluids on the sedimentary C and N. The sediments from Leg 170 Site 1040 contain 0.85-1.96 wt% total organic carbon (TOC) with Vienna Peedee belemnite (VPDB) d13CVPDB from -26.3 per mil to -22.5 per mil, and 832-2221 ppm total nitrogen (TN) with d15Nair from +3.5 per mil to +6.6 per mil. Sediment TN concentrations and d15N values show dramatic downhole increases within the uppermost 130 m of the section and more gradual downhole decreases from 130 meters below seafloor (mbsf) to the base of the décollement at ~370 mbsf. Concentrations and isotopic compositions of TOC are relatively uniform within the entire section, showing some minor perturbation within the décollement zone. In the uppermost 100 m, upsection increases in TN concentrations at constant TOC concentrations produce significant increases in atomic TOC/TN ratios from ~8 to ~18. Carbonate (calcite) contents in the wedge sediments are generally low (<4 wt%), but the d13C and Vienna standard mean ocean water (VSMOW) d18OVSMOW values vary significantly from -26.1 per mil to +4.1 per mil and from +30.0 per mil to +35.3 per mil, respectively. Concentrations and isotopic compositions of TOC and TN for sediments from Leg 205 Sites 1254 and 1255 overlap well with C-N data for sediments from the same depth intervals obtained during Leg 170 at Site 1040.

Geochemistry of pore water and sediments from ODP Leg 136 sites

During Leg 136 drilling was conducted at two sites in pelagic sediments of the north central Pacific Ocean. In this report, pore-water analyses for major seawater constituents, alkalinity, ammonia, nitrate, phosphate, silica, Ba, Fe, Li, Mn, and Sr are presented. Although concentration gradients are generally weak, resulting from slow sedimentation and concomitant diffusive communication with overlying water, there is evidence of sediment/pore-water interactions, associated sediment diagenesis, and formation of authigenic minerals. Bulk major and trace element compositions of the sediments are consistent with reactions inferred to occur within the sediments and with the lithology and mineralogy. Elemental compositions of the sediments are not strongly affected by diagenesis and are primarily related to the dominant mineralogy. Sediments are typical of deep ocean pelagic settings with a significant contribution from the alteration of volcanic ash and the formation of zeolites. Sedimentary rare earth element patterns also provide evidence of active scavenging processes by Mn and Fe oxide phases in the deeper sediments at Site 842.

Accumulation rates for western Dronning Maud Land from firn cores and snow pits

As a result of intensive field activities carried out by several nations over the past 15 years, a set of accumulation measurements for western Dronning Maud Land, Antarctica, was collected, based on firn-core drilling and snow-pit sampling. This new information was supplemented by earlier data taken from the literature, resulting in 111 accumulation values. Using Geographical Information Systems software, a first region-wide mean annual snow-accumulation field was derived. In order to define suitable interpolation criteria, the accumulation records were analyzed with respect to their spatial autocorrelation and statistical properties. The resulting accumulation pattern resembles well known characteristics such as a relatively wet coastal area with a sharp transition to the dry interior, but also reveals complex topographic effects. Furthermore, this work identifies new high-return shallow drilling sites by uncovering areas of insufficient sampling density.

Concentrations of suspended matter and heavy metals in melted ice- and snow water from the Barents Sea

In September-October 1998, during Cruise 14 of R/V Akademik Fedorov to the Barents Sea, in the region of 82° N between the Spitsbergen and Novaya Zemlya archipelagos samples of snow and ice were collected within four polygons. By means of atomic absorption with an electothermal atomizer (onboard the ship) in filtered (dissolved form) and unfiltered (sum of dissolved and particulate forms) samples of snow melt and ice melt concentrations of Fe, Mn, Cu, Cr, Ni, Co, Pb, and Cd were determined in order to estimate level of potential contamination of snow and ice with these metals. Excluding data on Ni, Cd (and probably Cu) in ice that were regarded to be unsatisfactory because of probable contamination of the ice samples during drilling concentrations of all the elements in snow and ice of the northern part of the Barents Sea appeared to be close to their background values or below. An attempt to identify the main sources of metal supply to snow from the atmosphere by comparison of ratios of metal particulate form to total content in snow of the Barents Sea and the same ratios in snow samples from clean regions of Finland and from contaminated areas of the Kola Peninsula showed that aerosols in the area of the expedition were supplied into the Barents Sea atmosphere from different sources, both natural and anthropogenic.

Chemical element contents and accumulation rates in metalliferous sediments from DSDP Hole 34-319, Bauer Deep, Southeast Pacific

Marked variations in the chemical and mineralogical composition of sediments at Site 319 have occurred during the 15 My history of sedimentation at this site. The change in composition through time parallels the variability observed in surface sediments from various parts of the Nazca Plate and can be related to variations in the proportion of hydrothermal, hydrogenous, detrital and biogenous phases reaching this site at different times. Metal accumulation rates at Site 319 reach a maximum near the basement for most elements, suggesting a strong hydrothermal contribution during the early history of this site. The hydrothermal contribution decreased rapidly as Site 319 moved away from the spreading center, although a subtle increase in this source is detectable about the time spreading began on the East Pacific Rise. The most recent sedimentation exhibits a strong detritalhydrogenous influence. Post-depositional diagenesis of amorphous phases has converted them to ironrich smectite and well-crystallized goethite without significantly altering the bulk composition of the sediment.

Planktonic foraminifera of Oligocene sediments from DSDP Hole 77-538A in the Gulf of Mexico

A relatively extended Oligocene pelagic sequence with good to medium recovery, drilled during DSDP Leg 77 in the Gulf of Mexico, yielded rich and well diversified planktonic foraminiferal faunas. Planktonic foraminifera recorded in Hole 538A span the interval from Zone P19 through P22. Evolutionary lineages were observed among the globoquadrinids, the globigerinitids, and the "Globigerina" ciperoensis and Globigerinoides primordius groups. Quantitative analysis of planktonic foraminiferal assemblages shows that faunas fluctuate in abundance and species diversity throughout the sequence. A few of these fluctuations that could be related to selective dissolution are mainly confined to the early-mid Oligocene. A climatic curve was constructed using as warmer indicators, Turborotalia pseudoampliapertura, Globoquadrina tripartita, Dentoglobigerina globularis, Dentoglobigerina baroemoenensis,. "Globigerina" ciperoensis and Globigerinoides groups, and Cassigerinella chipolensis; and as coller indicators, Catapsydrax spp., Globorotaloides spp., Subbotina angiporoides group, Globigerina s. str., and the tenuitellides. Three major intervals are identifiable in the climatic curve: Interval 1 (lower) up to Zone P20 predominantly cooler: Interval 2 (intermediate) up to the upper part of Zone P21a with warm and cool fluctuations: and lnterval 3 (upper), warmer, with a large positive peak, due to abundant "G." angulisuturalis, at the beginning of Zone P21b with recooling midway in Zone P22. In Intervals 1 and 2 planktonic foraminiferal faunas are dominated by temperate forms. Interpretation of planktonic foraminiferal data suggests that cooler water conditions characterize the early-mid Oligocene: during the mid Oligocene (most of Zone P21a) water masses exhibit peculiar characteristics transitional to the warmer waters prevailing during the late Oligocene. Warmer conditions were not definitely settled in Zone P22, however, as indicated by the cooler episode following the warmest peak. These climatic trends are inconsistent with those inferred from oxygen isotopes except at small scale. In fact, oxygen isotope values for Oligocene Atlantic Ocean are too heavy (thus too cool) in comparison with the high abundance and diversity of warm taxa, expecially in Zone P22. When values are lighter (warmer), as in Zone P19 abundance and diversity of warm indices are too low. To explain such a cool isotope values in presence of highly diversified and abundant warm planktonic foraminifera, we suggest (1) that the oxygen isotope ratio used for estimating Oligocene paleotemperatures might be 1? heavier than Eocene values and further increased for the late Oligocene. This hypothesis implies the presence of a relatively extended ice cap in Antarctica in the early and mid Oligocene, and probably an increase in ice volume during the late Oligocenc: (2) heavier isotope values might be related to an increase in salinity, or (3) by a combination of both ice cap and increase in salinity.

The C37 alkenone record of sea water of time series station DYNAPROC

The concentrations of suspended particulate pigments, C37-C38 alkenones, total organic carbon and nitrogen in the Ligurian Sea (northwestern Mediterranean) have been studied at 5 and 30 m depth during well defined thermocline conditions. An accurate description of the short term changes of these compounds has been achieved by means of four 36-h sampling cycles each encompassing consecutive filtration periods of 4 h. During sampling the thermocline changes were followed closely by simultaneous measurements of water column temperature, salinity and other physical parameters. The analysis of the collected samples indicates that the Haptophyte pigments and alkenones are essentially synthesized at the levels of highest primary production and therefore the C37 alkenone record reflects the seawater temperature at this depth level. The study also shows that part of these alkenones are distributed throughout the water column in association to the suspended particles. This process results in C37 alkenone distributions that, due to their high resistance to chemical and microbial degradation, record the temperature of the highest primary productivity layers even at shallow (e.g., 5 m depth) or deep (e.g., 1100 m depth) waters.