The "caring experience": testing the psychometric properties of the Caring Efficacy Scale

The purpose of the study was to undertake rigorous psychometric testing of the Caring Efficacy Scale in a sample of Registered Nurses. A cross-sectional survey of 2000 registered nurses was undertaken. The Caring Efficacy Scale was utilised to inform the psychometric properties of the selected items of the Caring Efficacy Scale. Cronbach’s Alpha identified reliability of the data. Exploratory Factor Analysis and Confirmatory Factor Analysis were undertaken to validate the factors. Confirmatory factor analysis confirmed the development of two factors; Confidence to Care and Doubts and Concerns. The Caring Efficacy Scale has undergone rigorous psychometric testing, affording evidence of internal consistency and goodness-of-fit indices within satisfactory ranges. The Caring Efficacy Scale is valid for use in an Australian population of registered nurses. The scale can be used as a subscale or total score reflective of self-efficacy in nursing. This scale may assist nursing educators to predict levels of caring efficacy.

Planning for sustainability of non motorised public transport in a developing city

Most large cities around the world are undergoing rapid transport sector development to cater for increased urbanization. Subsequently the issues of mobility, access equity, congestion, operational safety and above all environmental sustainability are becoming increasingly crucial in transport planning and policy making. The popular response in addressing these issues has been demand management, through improvement of motorised public transport (MPT) modes (bus, train, tram) and non-motorized transport (NMT) modes (walk, bicycle); improved fuel technology. Relatively little attention has however been given to another readily available and highly sustainable component of the urban transport system, non-motorized public transport (NMPT) such as the pedicab that operates on a commercial basis and serves as an NMT taxi; and has long standing history in many Asian cities; relatively stable in existence in Latin America; and reemerging and expanding in Europe, North America and Australia. Consensus at policy level on the apparent benefits, costs and management approach for NMPT integration has often been a major transport planning problem. Within this context, this research attempts to provide a more complete analysis of the current existence rationale and possible future, or otherwise, of NMPT as a regular public transport system. The analytical process is divided into three major stages. Stage 1 reviews the status and role condition of NMPT as regular public transport on a global scale- in developing cities and developed cities. The review establishes the strong ongoing and future potential role of NMPT in major developing cities. Stage 2 narrows down the status review to a case study city of a developing country in order to facilitate deeper role review and status analysis of the mode. Dhaka, capital city of Bangladesh, has been chosen due to its magnitude of NMPT presence. The review and analysis reveals the multisectoral and dominant role of NMPT in catering for the travel need of Dhaka transport users. The review also indicates ad-hoc, disintegrated policy planning in management of NMPT and the need for a planning framework to facilitate balanced integration between NMPT and MT in future. Stage 3 develops an integrated, multimodal planning framework (IMPF), based on a four-step planning process. This includes defining the purpose and scope of the planning exercise, determining current deficiencies and preferred characteristics for the proposed IMPF, selection of suitable techniques to address the deficiencies and needs of the transport network while laying out the IMPF and finally, development of a delivery plan for the IMPF based on a selected layout technique and integration approach. The output of the exercise is a planning instrument (decision tool) that can be used to assign a road hierarchy in order to allocate appropriate traffic to appropriate network type, particularly to facilitate the operational balance between MT and NMT. The instrument is based on a partial restriction approach of motorised transport (MT) and NMT, structured on the notion of functional hierarchy approach, and distributes/prioritises MT and NMT such that functional needs of the network category is best complemented. The planning instrument based on these processes and principles offers a six-level road hierarchy with a different composition of network-governing attributes and modal priority, for the current Dhaka transport network, in order to facilitate efficient integration of NMT with MT. A case study application of the instrument on a small transport network of Dhaka also demonstrates the utility, flexibility and adoptability of the instrument in logically allocating corridors with particular positions in the road hierarchy paradigm. Although the tool is useful in enabling balanced distribution of NMPT with MT at different network levels, further investigation is required with reference to detailed modal variations, scales and locations of a network to further generalise the framework application.

Saliva-derived DNA performs well in large-scale, high-density single-nucleotide polymorphism microarray studies

As of June 2009, 361 genome-wide association studies (GWAS) had been referenced by the HuGE database. GWAS require DNA from many thousands of individuals, relying on suitable DNA collections. We recently performed a multiple sclerosis (MS) GWAS where a substantial component of the cases (24%) had DNA derived from saliva. Genotyping was done on the Illumina genotyping platform using the Infinium Hap370CNV DUO microarray. Additionally, we genotyped 10 individuals in duplicate using both saliva- and blood-derived DNA. The performance of blood- versus saliva-derived DNA was compared using genotyping call rate, which reflects both the quantity and quality of genotyping per sample and the “GCScore,” an Illumina genotyping quality score, which is a measure of DNA quality. We also compared genotype calls and GCScores for the 10 sample pairs. Call rates were assessed for each sample individually. For the GWAS samples, we compared data according to source of DNA and center of origin. We observed high concordance in genotyping quality and quantity between the paired samples and minimal loss of quality and quantity of DNA in the saliva samples in the large GWAS sample, with the blood samples showing greater variation between centers of origin. This large data set highlights the usefulness of saliva DNA for genotyping, especially in high-density single-nucleotide polymorphism microarray studies such as GWAS.

Convergent media policy : the Australian case

This chapter considers the implications of convergence for media policy from three perspectives. First, it discusses what have been the traditional concerns of media policy, and the challenges it faces, from the perspectives of public interest theories, economic capture theories, and capitalist state theories. Second, it looks at what media convergence involves, and some of the dilemmas arising from convergent media policy including: (1) determining who is a media company; (2) regulatory parity between ‘old’ and ‘new’ media; (3) treatment of similar media content across different platforms; (4) distinguishing ‘big media’ from user-created content, and: (5) maintaining a distinction between media regulation and censorship of personal communication. Finally, it discusses attempts to reform media policy in light of these changes, including Australian media policy reports from 2011-12 including the Convergence Review, the Finkelstein Review of News Media, and the Australian Law Reform Commission’s National Classification Scheme Review. It concludes by arguing that ‘public interest’ approaches to media policy continue to have validity, even as they grapple with the complex question of how to understand the concept of influence in a convergent media environment.

A large scale quantitative study of pedestrian railway level crossing behaviour : deliberate violations, errors and deterrence

Every year a number of pedestrians are struck by trains resulting in death and serious injury. While much research has been conducted on train-vehicle collisions, very little is currently known about the aetiology of train-pedestrian collisions. To date, scant research has been undertaken to investigate the demographics of rule breakers, the frequency of deliberate violation versus error making and the influence of the classic deterrence approach on subsequent behaviours. Aim This study aimed to to identify pedestrians’ self-reported reasons for engaging in violations at crossing, the frequency and nature of rule breaking and whether the threat of sanctions influence such events. Method A questionnaire was administered to 511 participants of all ages. Results Analysis revealed that pedestrians (particularly younger groups) were more likely to commit deliberate violations rather than make crossing errors e.g., mistakes. The most frequent reasons given for deliberate violations were participants were running late and did not want to miss their train or participants believed that the gate was taking too long to open so may be malfunctioning. In regards to classical deterrence, an examination of the perceived threat of being apprehended and fined for a crossing violation revealed participants reported the highest mean scores for swiftness of punishment, which suggests they were generally aware that they would receive an “on the spot” fine. However, the overall mean scores for certainty and severity of sanctions (for violating the rules) indicate that the participants did not perceive the certainty and severity of sanctions as very high. This paper will further discuss the research findings in regards to the development of interventions designed to improve pedestrian crossing safety.

Searching for value : the influence of policy and reform on nurses’ sense of value in long-term aged care in Australia.

Contemporary literature on long-term aged care focuses heavily on issues associated with the recruitment and retention of nursing staff, such as job satisfaction and attitudes towards caring for older people. This paper aims to highlight one aspect of a larger study of registered nurses' experiences in long-term aged care in Australia and the influence that government policy and reform has in shaping that experience. This insight into aspects of nurses' everyday experience also contributes to a broader understanding of job satisfaction in long-term care. Findings from this study suggest that registered nurses experience tension in their search for value in their practice, which incorporates professional, political and social mediators of value and worth. These issues are discussed in relation to the impact of policy and reform on nurses' sense of value in long-term aged care and highlight the need for sensitive policy initiatives that support issues of value in nursing practice.

Industry policy, finance and the AIDC : Australia from the 1950s to the 1970s

This thesis, conceived within a Marxist framework, addresses key conceptual issues in the writing and theorising on industry policy in post second world- war Australia. Broadly, the thesis challenges the way that industry policy on the left of politics (reflected in the social democratic and Keynesian positions) has been constructed as a practical, progressive policy agenda. Specifically, the thesis poses a direct challenge to the primacy of the ‘national’ in interpreting the history of industry policy. The challenge is to the proposition that conflicts between national industry and international finance arose only from the mid 1980s. On the contrary, as will be seen, this is a 1960s issue and any interpretation of the debates and the agendas surrounding industry policy in the 1980s must be predicated on an understanding of how the issue was played out two decades earlier. As was the case in the 1960s, industry policy in the 1980s has been isolated from two key areas of interrogation: the role of the nation state in regulating accumulation and the role of finance in industry policy. In the 1950s and more so in the 1960s and early 1970s there was a reconfiguration of financing internationally but it is one that did not enter into industry policy analysis. The central concern therefore is to simultaneously sketch the historical political economy on industry policy from the 1950s through to the early 1970s in Australia and to analytically and empirically insert the role of finance into that history. In so doing the thesis addresses the economic and social factors that shaped the approach to industry finance in Australia during this critical period. The analysis is supported by a detailed examination of political and industry debates surrounding the proposal for, and institution of, a key national intervention in the form of the Australian Industry Development Corporation (AIDC).

Enabling open access to and re-use of publicly funded research data in Malaysian public universities : a legal and policy analysis

Numerous statements and declarations have been made over recent decades in support of open access to research data. The growing recognition of the importance of open access to research data has been accompanied by calls on public research funding agencies and universities to facilitate better access to publicly funded research data so that it can be re-used and redistributed as public goods. International and inter-governmental bodies such as the ICSU/CODATA, the OECD and the European Union are strong supporters of open access to and re-use of publicly funded research data. This thesis focuses on the research data created by university researchers in Malaysian public universities whose research activities are funded by the Federal Government of Malaysia. Malaysia, like many countries, has not yet formulated a policy on open access to and re-use of publicly funded research data. Therefore, the aim of this thesis is to develop a policy to support the objective of enabling open access to and re-use of publicly funded research data in Malaysian public universities. Policy development is very important if the objective of enabling open access to and re-use of publicly funded research data is to be successfully achieved. In developing the policy, this thesis identifies a myriad of legal impediments arising from intellectual property rights, confidentiality, privacy and national security laws, novelty requirements in patent law and lack of a legal duty to ensure data quality. Legal impediments such as these have the effect of restricting, obstructing, hindering or slowing down the objective of enabling open access to and re-use of publicly funded research data. A key focus in the formulation of the policy was the need to resolve the various legal impediments that have been identified. This thesis analyses the existing policies and guidelines of Malaysian public universities to ascertain to what extent the legal impediments have been resolved. An international perspective is adopted by making a comparative analysis of the policies of public research funding agencies and universities in the United Kingdom, the United States and Australia to understand how they have dealt with the identified legal impediments. These countries have led the way in introducing policies which support open access to and re-use of publicly funded research data. As well as proposing a policy supporting open access to and re-use of publicly funded research data in Malaysian public universities, this thesis provides procedures for the implementation of the policy and guidelines for addressing the legal impediments to open access and re-use.

Fluid-structure interaction analysis of full scale vehicle-barrier impact using coupled SPH-FEA

Portable water-filled barriers (PWFB) are roadside structures used to separate moving traffic from work-zones. Numerical PWFB modelling is preferred in the design stages prior to actual testing. This paper aims to study the fluid-structure interaction of PWFB under vehicular impact using several methods. The strategy to treat water as non-structural mass was proposed and the errors were investigated. It was found that water can be treated with the FEA-NSM model for velocities higher than 80kmh-1. However, full SPH/FEA model is still the best treatment for water and necessary for lower impact velocities. The findings in this paper can be used as guidelines for modelling and designing PWFB.

Road crashes and long term disabilities : Implications for policy and its implementation in Cambodia

The number of road crashes leading to disabilities is increasing alarmingly and constitutes a significant public health problem in many countries. So far, very few studies have been conducted to explore the impacts on persons with disabilities due to road crashes, and their families. This gap in the literature is especially large for low income countries such as Cambodia. This review explored relevant publications to provide background on persons in Cambodia with disabilities due to road crashes and their families. The review adds to the limited knowledge base in this area and has the potential to provide information on contextual issues relevant to the experience of disability in other developing countries, such as poverty, stigma and lack of resources. The findings of this review form the first part of a PhD study that will contribute to the development of informed policy change leading towards a safer system for all road users, including persons with disabilities.

A nanometre-scale non-periodic structural variation in high temperature superconducting ceramics and the implications for properties

Non-periodic structural variation has been found in the high Tc cuprates, YBa2Cu3O7-x and Hg0.67Pb0.33Ba2Ca2Cu 3O8+δ, by image analysis of high resolution transmission electron microscope (HRTEM) images. We use two methods for analysis of the HRTEM images. The first method is a means for measuring the bending of lattice fringes at twin planes. The second method is a low-pass filter technique which enhances information contained by diffuse-scattered electrons and reveals what appears to be an interference effect between domains of differing lattice parameter in the top and bottom of the thin foil. We believe that these methods of image analysis could be usefully applied to the many thousands of HRTEM images that have been collected by other workers in the high temperature superconductor field. This work provides direct structural evidence for phase separation in high Tc cuprates, and gives support to recent stripes models that have been proposed to explain various angle resolved photoelectron spectroscopy and nuclear magnetic resonance data. We believe that the structural variation is a response to an opening of an electronic solubility gap where holes are not uniformly distributed in the material but are confined to metallic stripes. Optimum doping may occur as a consequence of the diffuse boundaries between stripes which arise from spinodal decomposition. Theoretical ideas about the high Tc cuprates which treat the cuprates as homogeneous may need to be modified in order to take account of this type of structural variation.

Cyclone intensity categories

The weather forecast centers in Australia and many other countries use a scale of cyclone intensity categories (categories 1-5) in their cyclone advisories, which are considered to be indicative of the cyclone damage potential. However, this scale is mainly based on maximum gust wind speeds. In a recent research project involving computer modeling of cyclonic wind forces on roof claddings and fatigue damage to claddings, it was found that cyclone damage not only depends on the maximum gust wind speed, but also on two other cyclone parameters, namely, the forward speed and radius to maximum winds. This paper describes the computer model used in predicting the cyclone damage to claddings and investigates the damage potential of a cyclone as a function of all the relevant cyclone parameters, based on which it attempts to refine the current scale of cyclone intensity categories.

Large-scale testing of steel frame structures comprising non-compact sections

Application of 'advanced analysis' methods suitable for non-linear analysis and design of steel frame structures permits direct and accurate determination of ultimate system strengths, without resort to simplified elastic methods of analysis and semi-empirical specification equations. However, the application of advanced analysis methods has previously been restricted to steel frames comprising only compact sections that are not influenced by the effects of local buckling. A research project has been conducted with the aim of developing concentrated plasticity methods suitable for practical advanced analysis of steel frame structures comprising non-compact sections. A series of large-scale tests were performed in order to provide experimental results for verification of the new analytical models. Each of the test frames comprised non-compact sections, and exhibited significant local buckling behaviour prior to failure. This paper presents details of the test program including the test specimens, set-up and instrumentation, procedure, and results.

Public policy, disaster risk management and climate change adaptation

Public policymakers are caught in a dilemma : there is a growing list of urgent issues to address, at the same time that public expenditure is being cut. Adding to this dilemma is a system of government designed in the 19th century and competing theories of policymaking dating back to the 1950s. The interlinked problems of disaster risk management and climate change adaptation are cases in point. As the climate changes, there will be more frequent, intense and/or prolonged disasters such as floods and bushfires. Clearly a well integrated whole of government response is needed, but how might this be achieved? Further, how could academic research contribute to resolving this dilemma in a way that would produce something of theoretical interest as well as practical outcomes for policymakers? These are the questions addressed by our research via a comparative analysis of the 2009 Victorian bushfires, the 2011 Perth Hills bushfires, and the 2011 Brisbane floods. Our findings suggest that there is a need to: improve community engagement and communication; refocus attention on resilience; improve interagency communication and collaboration; and, develop institutional arrangements that support continual improvement and policy learning. These findings have implications for all areas of public policy theory and practice.