Topographic and thermal mapping of volcanic terrain using AVTIS ground-based 94-GHz dual-mode radar/radiometric imager

The All-Weather Volcano Topography Imaging Sensor remote sensing instrument is a custom-built millimeter-wave (MMW) sensor that has been developed as a practical field tool for remote sensing of volcanic terrain at active lava domes. The portable instrument combines active and passive MMW measurements to record topographic and thermal data in almost all weather conditions from ground-based survey points. We describe how the instrument is deployed in the field, the quality of the primary ranging and radiometric measurements, and the postprocessing techniques used to derive the geophysical products of the target terrain, surface temperature, and reflectivity. By comparison of changing topography, we estimate the volume change and the lava extrusion rate. Validation of the MMW radiometry is also presented by quantitative comparison with coincident infrared thermal imagery.

Computer simulations of pyroclastic flows from dome collapse

We present a method of simulating both the avalanche and surge components of pyroclastic flows generated by lava collapsing from a growing Pelean dome. This is used to successfully model the pyroclastic flows generated on 12 May 1996 by the Soufriere Hills volcano, Montserrat. In simulating the avalanche component we use a simple 3-fold parameterisation of flow acceleration for which we choose values using an inverse method. The surge component is simulated by a 1D hydraulic balance of sedimentation of clasts and entrainment of air away from the avalanche source. We show how multiple simulations based on uncertainty of the starting conditions and parameters, specifically location and size (mass flux), could be used to map hazard zones.

Sensitivity of OMI SO2 measurements to variable eruptive behaviour at Soufrière Hills Volcano, Montserrat

Since 2004, the satellite-borne Ozone Mapping Instrument (OMI) has observed sulphur dioxide (SO2) plumes during both quiescence and effusive eruptive activity at Soufrière Hills Volcano, Montserrat. On average, OMI detected a SO2 plume 4-6 times more frequently during effusive periods than during quiescence in the 2008-2010 period. The increased ability of OMI to detect SO2 during eruptive periods is mainly due to an increase in plume altitude rather than a higher SO2 emission rate. Three styles of eruptive activity cause thermal lofting of gases (Vulcanian explosions; pyroclastic flows; a hot lava dome) and the resultant plume altitudes are estimated from observations and models. Most lofting plumes from Soufrière Hills are derived from hot domes and pyroclastic flows. Although Vulcanian explosions produced the largest plumes, some produced only negligible SO2 signals detected by OMI. OMI is most valuable for monitoring purposes at this volcano during periods of lava dome growth and during explosive activity.

Different strategies for improving summer thermal comfort in heavyweight traditional buildings

In order to exploit the passive energy potential of the building envelope, it is important to provide a right combination of insulation thickness, heat capacity and night-time ventilation. In this paper, this issue will be tackled with reference to an historic building in Catania (Southern Italy). The building was built at the end of the XIX century, and its opaque envelope is entirely made with lava stones, which is typical of traditional architecture in this area. Starting from the current configuration of the building, many hypotheses for refurbishment are considered, combined with different strategies for passive cooling, such as night-time ventilation, use of shading devices and adoption of highly-reflective coatings. The effectiveness of each solution in terms of summer thermal comfort is evaluated through dynamic thermal simulations carried out with EnergyPlus. The results show the synergic effect of these strategies, as well as their individual impact, and allow to draw some general conclusions about the behaviour of heavyweight buildings under moderately hot weather conditions.

Selective environmental stress caused by magmatic sulfur emissions from continental flood basalt eruptions

Several biotic crises during the past 300 million years have been linked to episodes of continental flood basalt volcanism, and in particular to the release of massive quantities of magmatic sulphur gas species. Flood basalt provinces were typically formed by numerous individual eruptions, each lasting years to decades. However, the environmental impact of these eruptions may have been limited by the occurrence of quiescent periods that lasted hundreds to thousands of years. Here we use a global aerosol model to quantify the sulphur-induced environmental effects of individual, decade-long flood basalt eruptions representative of the Columbia River Basalt Group, 16.5–14.5 million years ago, and the Deccan Traps, 65 million years ago. For a decade-long eruption of Deccan scale, we calculate a decadal-mean reduction in global surface temperature of 4.5 K, which would recover within 50 years after an eruption ceased unless climate feedbacks were very different in deep-time climates. Acid mists and fogs could have caused immediate damage to vegetation in some regions, but acid-sensitive land and marine ecosystems were well-buffered against volcanic sulphur deposition effects even during century-long eruptions. We conclude that magmatic sulphur from flood basalt eruptions would have caused a biotic crisis only if eruption frequencies and lava discharge rates had been high and sustained for several centuries at a time.

The extreme physical properties of the CoRoT-7b super-Earth

The search for rocky exoplanets plays an important role in our quest for extra-terrestrial life. Here, we discuss the extreme physical properties possible for the first characterised rocky super-Earth, CoRoT-7b (R(pl) = 1.58 +/- 0.10 R(Earth), M(pl) = 6.9 +/- 1.2 M(Earth)). It is extremely close to its star (a = 0.0171 AU = 4.48 R(st)), with its spin and orbital rotation likely synchronised. The comparison of its location in the (M(pl), R(pl)) plane with the predictions of planetary models for different compositions points to an Earth-like composition, even if the error bars of the measured quantities and the partial degeneracy of the models prevent a definitive conclusion. The proximity to its star provides an additional constraint on the model. It implies a high extreme-UV flux and particle wind, and the corresponding efficient erosion of the planetary atmosphere especially for volatile species including water. Consequently, we make the working hypothesis that the planet is rocky with no volatiles in its atmosphere, and derive the physical properties that result. As a consequence, the atmosphere is made of rocky vapours with a very low pressure (P <= 1.5 Pa), no cloud can be sustained, and no thermalisation of the planet is expected. The dayside is very hot (2474 +/- 71 K at the sub-stellar point) while the nightside is very cold (50-75 K). The sub-stellar point is as hot as the tungsten filament of an incandescent bulb, resulting in the melting and distillation of silicate rocks and the formation of a lava ocean. These possible features of CoRoT-7b could be common to many small and hot planets, including the recently discovered Kepler-10b. They define a new class of objects that we propose to name ""Lava-ocean planets"". (C) 2011 Elsevier Inc. All rights reserved.

The onset of flood basalt volcanism, Northern Parana Basin, Brazil: A precise U-Pb baddeleyite/zircon age for a Chapeco-type dacite

We report the first U-Pb baddeleyite/zircon date for a felsic volcanic rock from the Parana Large Igneous Province in south Brazil. The new date of 134.3 +/- 0.8 Ma for a hypocrystalline Chapeco-type dacite from Ourinhos (northern Parana basin) is an important regional time marker for the onset of flood basalt volcanism in the northern and western portion of the province. The dated dacite was erupted onto basement rocks and is overlain by a high-Ti basalt sequence, interpreted to be correlative with Pitanga basalts elsewhere. This new U-Pb date for the Ourinhos dacite is consistent with the local stratigraphy being slightly older than the few reliable step-heating (40)Ar/(39)Ar dates currently available for overlying high-Ti basalts (133.6-131.5 Ma). This indicates an similar to 3 Ma time span for the building of the voluminous high-Ti lava sequence of the Parana basin. On the other hand, it overlaps the (40)Ar/(39)Ar dates (134.8-134.1 Ma) available for the stratigraphically older low-Ti basalt (Gramado + Esmeralda types) and dacite-rhyolite (Palmas type) sequences from South Brazil, which is consistent with the short-lived character of this volcanism and its rapid succession by the high-Ti sequence. (C) 2010 Elsevier B.V. All rights reserved.

Fluoride in the groundwater of the Tubarao and Crystaline aquifers, Salto-Indaiatuba region (SP)

Anomalous concentrations of fluoride in groundwater were identified in 19 drilling wells in the Salto-Indaiatuba region, Sao Paulo State, with an average concentration of 3.03 mg dm(-3) and a maximum of 6.95 mg dm(-3), which constitute a restriction for the water`s usage in terms of human consumption. The wells exploit water from the Tubarao Aquifer (sedimentary, granular) and Crystalline Aquifer (granitic, fractured), used for sanitary or industrial purposes. These groundwaters are typically HCO(3) and HCO(3)-SO(4) types, with high concentrations of HCO(3) -and Na(+) and high pH-values between 7.5 and 10.0. The highest concentrations of F-are associated to the Tubarao and Tubarao/Crystalline aquifer drilling wells. The presence of F-in groundwater is controlled by these high pH-values, alkalinity, and fluorine availability. The source of fluoride in the Tubarao and Crystalline Aquifers can be related to the percolation of hydrothermal fluids associated with Mesozoic lava flow, emplaced due to the opening of Atlantic Ocean and/or hydrolysis of fluorine-rich minerals and clay minerals.

Well-preserved Late Paleoproterozoic volcanic centers in the Sao Felix do Xingu region, Amazonian Craton, Brazil

The Amazonian craton in the Sao Felix do Xingu city, southeast region of the Para state, north of Brazil, hosts exceptionally well-preserved Paleoproterozoic bimodal magmatic units grouped in the Sobreiro and Santa Rosa formations. These formations are correlated to the Uatuma magmatic event, which is largely distributed in the Amazonian craton occupying more than 1,500,000 km(2). Geological mapping and petrographical observations reveal distinct spectra of volcanic facies in both formations. The basal calc-alkaline Sobreiro Formation is composed mainly of andesitic and dacitic lava flows and associated volcaniclastic facies of autoclastic origin, with subordinate pyroclastic flow deposits. This formation shows inferred eruption style that is similar to those in Flood Basalt Provinces, with rare scutulum-type lava shields. The upper A-type Santa Rosa Formation was generated by multicyclic explosive and effusive episodes predominantly associated with large fissures and is materialized by voluminous ignimbrites with subordinated ash-fall tuff, crystal tuff, lapilli-tuff, co-ignimbritic breccias, rhyolitic dikes and domes, and associated granitic porphyries and equigranular granitic intrusions. Ignimbrite and rhyolite dikes reveal conspicuous vertical flow pattern pointing to a fissure-controlled eruption, similar to Sierra Madre Occidental ignimbrite province. The proposed evolutionary model for the Sao Felix do Xingu units differs from those of other occurrences related to the Uatuma magmatic event in the Amazonian craton, characterized by predominance of A-type volcanism and contemporaneous granites. (C) 2010 Elsevier B.V. All rights reserved.

Gestão da inovação para a sustentabilidade ambiental: estudos de caso do desenvolvimento e difusão de produtos de consumo industrializados com materiais de fontes renováveis

O objetivo desta tese é identificar como ocorre a gestão da inovação de produto ambientalmente sustentável. Pelo método de estudo de caso e sob a perspectiva de três vertentes da teoria organizacional (estrutura do setor de negócios, visão baseada em recursos e visão relacional) foi realizada uma análise abrangente de como os condicionantes externos do ambiente competitivo, os condicionantes internos empresariais e os relacionamentos organizacionais impactaram no projeto de desenvolvimento e difusão de duas inovações de produto com atributos favoráveis à sustentabilidade ambiental: uma esponja de banho com fibras amazônicas e PET reciclado e um lava-louças líquido para o pronto-uso de fontes renováveis. Os dois casos apresentam marcantes diferenças em relação ao porte das empresas, às estruturas, competências e culturas organizacionais, à maturidade das respectivas plataformas tecnológicas de fontes renováveis e às abordagens utilizadas na gestão dos projetos de desenvolvimento de novo produto. Além disso, os dois casos são distintos na competitividade dos atributos de produto ambientais e funcionais em relação ao preço ante os produtos concorrentes. Apesar destas diferenças, construtos da visão relacional foram utilizados para identificar similaridades entre os dois estudos de caso na gestão da inovação. Redes informais internas realizaram uma inovação organizacional ao criarem um departamento de sustentabilidade, o qual realizou diagnósticos e recomendações para minimizar os riscos sócio-ambientais e regulatórios decorrentes do suprimento da fibra amazônica para a esponja de banho. E um relacionamento colaborativo complementou a inovação de produto e realizou inovações de marketing que proporcionaram o melhor desempenho na difusão do lava-louças pronto-uso de fontes renováveis no varejo. Portanto, apesar das diferenças nos condicionantes internos e externos, a gestão da inovação nos dois casos se utilizou de relacionamentos colaborativos a fim de gerar inovações empresariais que solucionaram as restrições ao processo de inovação de produto ambientalmente sustentável.

Geologia e geoquimica do complexo cambaizinho, sao gabriel - RS

Mapeamentos geológicos feitos pelo autor na região do Arroio Cambaizinho - são Gabriel/RS, resultaram na definição do Complexo Cambaizinho, representado pelas seqüências meta-sedimentar e máfica-ultramáfica, intimamente associadas ao longo de toda a extensão da associação supracrustal. A seqüência meta-se dimentar é constitu1da por gnaisses quartzo-feldspáticos dominan tes, anfibolitos bandados e quartzitos subordinados, derivados de sedimentos areno-pelítico-carbonatados estruturados, de forma ritmica em ambiente subaquoso. Niveis composicionais de ocorrência restrita contendo estaurolita, definem o grau metamórfico (médio) para esta região. Intercalações de serpentinitos, xistos magnesianos variados e anfibolitos a granulação fina, na forma de camadas e/ou lentes interestratificadas nos meta-sedimentos indicam suas derivações a partir de derrames e/ou intrusões , ígneas de pequena profundidade de composição básica-ultrabásica. Este juntamente com níveis de sedimentos qu1micos intercalados e corpos de gabros, constituem a seqüência máfica-ultramáfica. O complexo, representa o segmento norte de um cintu rão supracrustal polideformado de forma geométrica aproximadamente linear, com orientação NNE, que se extende desde a localidade de Passo do Ivo, situado mais a sul, até a região objeto deste trabalho. Quatro fases de deformação dúcteis foram das para a área, estando as duas primeiras (Dl e D2) identifica associadas xx aos eventos metamórficos regionais Ml e M2. O metamorfismo mais antigo (Ml), assinalado por paragêneses diagnósticas em metapelitos alcançou o fácies anfibolito (zona da estaurolita), estando representado em outras litologias pela ocorrência de olivina metamórfica em paragênese com tremolita e/ou talco (meta-serpentinitos) e hornblenda mais oligoclásio/andesina em meta-básicas. O M2, mais jovem, atingiu o fácies xistos verdes, cujas assembléias mineralógicas se associam à foliação S2, de distribuição ir regular ao longo do cinturão. As condições fisicas de Ml foram de média P/T, similares às do metamorfismo Dalradiano. Intrusões graniticas na forma de lâminas (corpos ta bulares) durante a segunda fase de deformação D2, datados pelo mé todo Rb/Sr em 661 :: 29 Ma e agrupados sob a denominação de Granatóides Sanga do Jobim, fornecem idades mínimas para o complexo. Os vários grupos composiciconais da seqüência máfic~ -ultramáfica, individualizados com base em critérios petrográf~ cos e conteúdo de elementos maiores correspondem a: serpentinitos e olivina-talco ultramafitos (cumulados komatilticos); xis tos magnesianos à talco e clorita e anfibólio xistos (komatiitos); clorita-hornblenda xistos (basaltos komatiiticos), litos e metagabros (basaltos e gabros tolelticos). anfibo Estes vários tipos litológicos foram originados através de diferentes graus de fusão parcial do manto como indicado pelo hiato composicional de MgO (11 à 17%) e os diferentes padrões de ETR existentes entre os anfibolitos/metagabros (toleitos) e os serpentinitos/xistos magnesianos (komatiltos).As variações composicionais no interior de cada grupo, foram controladas pelo fracionamento (acumulação ou extração) de olivina e pouco ortopiroxênio (serpentinitos e olivina-talco ultramafitos)clinopiroxênios (clorita e anfibólios xistos, clorita hornblenda xistos), clinopiroxênio e plagioclásio (anfibolitos e metagabros). As abundâncias e os padrões de ERTL (elementos terras raras leves) enriquecidos, juntamente com os baixos valores das razões A1203/Ti02 e CaO/Ti02 das amostras de xistos magnesiinos das camadas A e B sugerem derivações deste material a partir de baixas percentagens de fusão de um manto enriquecido em mentos incompatíveis. As anomalias negativas de Ce e Eu na ele maio ria das rochas da seqüência máfica-ultramáfica indicam que protólitos ígneossofreram alterações em ambiente submarino.

Indicação de Fachin revela guerra de menções nas redes

A análise de rede realizada pela FGV DAPP revela que o cenário de polarização entre setores pró-governo e setores críticos (na oposição e também na própria base aliada) vem politizando os temas relacionados ao Supremo Tribunal Federal. Entre os dias 10 de abril e 10 de maio, os principais temas ligados ao STF geraram debates politizados, opondo setores pró e contra o governo. Lava Jato, financiamento de campanha, PEC da Bengala e agora a indicação do jurista Luiz Edson Fachin reproduziram a disputa entre os dois campos.

Reflexão sobre a contabilização da marca: perspectiva do investidor e do administrador

Este estudo procurou levantar o porquê das diferenças dos valores do Ativo Intangível - marca apontada nos relatórios financeiros das empresas, em particular da Empresa Petróleo Brasileiro S/A – Petrobras e os valores apontados pelas empresas de avaliações de marca. Traçando uma linha de análise dos diversos fatores que explicam estas diferenças. Como as orientações dos órgãos reguladores contábeis se posicionam e definem quais as melhores práticas, que conforme apresentaremos, conduzem as diferenças entre os valores contábeis e o econômico das marcas, traduzindo num dos itens mais importantes dos Intangíveis das empresas. Este estudo considerou o período encerrado em 2014, porém ainda sem a influência dos desdobramentos da Operação Lava Jato da Policia Federal, que atingiu a Petróleo Brasileiro S/A e consequentemente o valor da Marca.

Análise de desempenho de sistemas distribuídos de grande porte na plataforma Java

The lava Platform is increasing1y being adopted in the development of distributed sys¬tems with higb user demando This kind of application is more complex because it needs beyond attending the functional requirements, to fulfil1 the pre-established performance parameters. This work makes a study on the Java Vutual Machine (JVM), approaching its intemal aspects and exploring the garbage collection strategies existing in the literature and used by the NM. It also presents a set of tools that helps in the job of optimizing applications and others that help in the monitoring of applications in the production envi¬ronment. Doe to the great amount of technologies that aim to solve problems which are common to the application layer, it becomes difficult to choose the one with best time response and less memory usage. This work presents a brief introduction to each one of tbe possible technologies and realize comparative tests through a statistical analysis of the response time and garbage collection activity random variables. The obtained results supply engineers and managers with a subside to decide which technologies to use in large applications through the knowledge of how they behave in their environments and the amount of resources that they consume. The relation between the productivity of the technology and its performance is also considered ao important factor in this choice

Optical Impression Systems for CAD-CAM Restorations

Computer-aided design/computer-aided manufacturing images can be taken through either direct or indirect imaging. For the indirect systems, the digitalization is obtained from the impression material or cast, and for the direct ones the image is taken directly from the mouth using intraoral scanners.The direct acquisition systems have been constantly improved because these are less invasive, quicker, and more precise than the conventional method. Besides, the digital images can be easily stored for a long time. Therefore, the aim of this paper was to describe and discuss based on the literature the main direct image acquisition systems available on the market: CEREC Bluecam (Sirona), Lava C.O.S. System (3M ESPE), iTero System (Cadent/Straumann), and E4D System (D4D Technologies).