Healing outcomes at implants installed in grafted sites: an experimental study in dogs

Aim: To evaluate the integration of implants installed using a surgical guide in augmented sites with autologous bone or deproteinized bovine bone mineral (DBBM) blocks, concomitantly with a collagen membrane.Material and methods: Mandibular molars were extracted bilaterally in six Labrador dogs, the buccal bony wall was removed, and a box-shaped defect was created. After 3 months, flaps were elevated, a bony graft was harvested from the ascending ramus, and secured to the lateral wall of the defect by means of screws. In the left mandibular side, a DBBM block was fixed into the defect. A resorbable membrane was applied at both sides, and the flaps were sutured. After 3 months, flaps were elevated, and a customized device was used as surgical guide to prepare the recipient sites in the interface between grafts and parent bone. One implant was installed in each side of the mandible. After 3 months, biopsies were harvested, and ground sections were prepared for histologic evaluation.Results: One autologous bone block graft was lost before implant installation. The width of the alveolar crest at the test sites (DBBM) was 5.4 +/- 1.2 mm before, 9.4 +/- 1.2 mm immediately after grafting, and 9.3 +/- 1 mm at implant installation. At the control sites (autologous bone), the corresponding values were: 5.2 +/- 1, 9 +/- 1.2, and 8.7 +/- 0.9 mm, respectively. All implants installed were available for histologic evaluation (n = 5). The autologous bone grafts, rich in vessels and cells, were integrated in the parent bone, and only little non-vital bone was found. The BIC% was 56.7 +/- 15.6% and 54.2 +/- 13.2% at the buccal and lingual aspects, respectively. At the test sites, the DBBM appeared to be embedded into connective tissue, and very little newly formed bone was encountered within the grafts. The BIC% was 5.8 +/- 12.3% and 51.3 +/- 14.2% at the buccal and lingual aspects, respectively.Conclusions: Autologous bone blocks used to augment the alveolar bony crest horizontally allowed the complete osseointegration of implants installed after 3 months of healing. However, similar blocks of DBBM did not promote osseointegration, although the installed implants were stable owing to the osseointegration in the sites of the parent bone.

Anthelmintic effects of condensed tannins on Trichostrongylus colubriformis in experimentally infected sheep

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Solucao de sistemas lineares com matrizes e vetores esparsos em computadores vetoriais

This paper presents a methodology for solving a set of linear sparse equations on vector computers. The new methodology is able to exploit the matrix and vector sparsities. The implementation was made on a CRAY Y-MP 2E/232 computer and the results were taken from electric power systems with 118, 320, 725 and 1729 buses. The proposed methodology was compared with three previous methods and the results show the superior performance of the new one.

MnO2 influence on the electrical properties of SnO2-based ceramic systems

Tin dioxide is an n-type semiconductor that when doped with other metallic oxides exhibits non-linear electric behavior with high non-linear coefficient values typical of a varistor. In this work, electrical properties of the SnO2.CoO.Ta2O5 and SnO2.CoO.MnO2.Ta2O5 ceramics systems were studied with the objective of analyzing the influence of MnO2 on sintering behavior and electrical properties of these systems. The compacts were prepared by powder mixture process and sintered at 1300°C for 1 hour, in air, using a constant heating rate of 10°C/min. The morphological and structural properties were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The densities of the sintered ceramics were measured using the Archimedes method. The SnO2.CoO.Ta2O5 and SnO2.CoO.MnO2.Ta2O5 systems presented breakdown fields (Eb) about 3100 V.cm-1 and 3800 V.cm-1, respectively, and non-linear coefficient (α) about 10 and 20, respectively.

Sol-Gel Erbium-Doped Silica-Hafnia Planar and Channel Waveguides

Erbium activated SiO2 -HfO2 planar waveguides, doped with Er3+ concentrations ranging from 0.01 to 4 mol%, were prepared by sol-gel method. The films were deposited on v-SiO2 and silica-on-silicon substrates using dip-coating technique. The waveguides show high densification degree, effective intermingling of the two film components, and uniform surface morphology. The waveguide deposited on silica-on-silicon substrates shows one single propagation mode at 1.5μm, with a confinement coefficient of 0.81 and an attenuation coefficient of 0.8 dB/cm at 632.8nm. Emission in the C-telecommunication band was observed at room temperature for all the samples upon continuouswave excitation at 980 nm or 514.5 nm. The shape of the emission band corresponding to the 4I13/2 → 4I15/2 transition is found to be almost independent both on erbium content and excitation wavelength, with a FWHM between 44 and 48 nm. The 4I13/2 level decay curves presented a single-exponential profile, with a lifetime ranging between 1.1 - 6.6 ms, depending on the erbium concentration. Infrared to visible upconversion luminescence upon continuous-wave excitation at 980 nm was observed for all the samples. Channel waveguide in rib configuration was obtained by etching the active film in order to have a well confined mode at 1.5 μm.

Resistance of Santa Inês and Ile de France suckling lambs to gastrointestinal nematode infections.

A trial was carried out to determine the resistance to natural infection by gastrointestinal nematodes in 12 Santa Inês and nine Ile de France lambs before weaning. Faecal samples were obtained for faecal nematode egg counts (FEC). Blood samples were collected to determine packed cell volume (PCV), total plasma protein levels and peripheral eosinophil counts. Most Ile de France lambs (77.8%) were treated with an anthelmintic at 43 days of age, while 50% off Santa Inês lambs were treated at weaning, 57 days of age. The mean PCV values were normal in Santa Inês lambs, while in Ile de France lambs showed lower values reaching 22.3% at 43 days of age. The lowest mean plasma protein values were observed in Ile de France lambs (4.13 g/dl) at 43 days of age and in Santa Inês lambs (5.0 g/dl) at 57 days of age. Before weaning, Santa Inês lambs were susceptible to natural infections by gastrointestinal nematodes but with a greater capacity to stand the adverse effects of parasitism compared to Ile de France lambs.

Effect of fortification of drinking water with iron plus ascorbic acid or with ascorbic acid alone on hemoglobin values and anthropometric indicators in preschool children in day-care centers in Southeast Brazil

Background. Iron-deficiency anemia currently is the most frequently occurring nutritional disorder worldwide. Previous Brazilian studies have demonstrated that drinking water fortified with iron and ascorbic acid is an adequate vehicle for improving the iron supply for children frequenting day-care centers. Objective. The objective of this study was to clarify the role of ascorbic acid as a vehicle for improving iron intake in children in day-care centers in Brazil. Methods. A six-month study was conducted on 150 children frequenting six day-care centers divided into two groups of three day-care centers by drawing lots: the iron-C group (3 day-care centers, n = 74), which used water fortified with 10 mg elemental iron and 100 mg ascorbic acid per liter, and the comparison group (3 day-care centers, n = 76), which used water containing only 100 mg ascorbic acid per liter. Anthropometric measurements and determinations of capillary hemoglobin were performed at the beginning of the study and after six months of intervention. The food offered at the day-care centers was also analyzed. Results. The fo od offered at the day-care center was found to be deficient in ascorbic acid, poor in heme iron, and adequate in non-heme iron. Supplementation with fortified drinking water resulted in a decrease in the prevalence of anemia and an increase in mean hemoglobin levels associated with height gain in both groups. Conclusions. Fortification of drinking water with iron has previously demonstrated effectiveness in increasing iron supplies. This simple strategy was confirmed in the present study. The present study also demonstrated that for populations receiving an abundant supply of non-heme iron, it is possible to control anemia in a simple, safe, and inexpensive manner by adding ascorbic acid to drinking water. © 2005, The United Nations University.

Comparação entre técnicas coproparasitológicas no diagnóstico de ovos de helmintos e oocistos de protozoários em cães.

In this study we evaluated the frequency of enteroparasites in pet dogs and their association with age, sex and breed, as well as the efficiency of the Willis-Mollay, Faust, Sedimentation and Direct exam methods. By these methods we processed 401 fecal samples. The samples were positive in the following percentages: Ancylostoma spp. (53.1%), Toxocara canis (20.7%), Cystoisospora ohioensis (15.7%), Trichuris vulpis (3.7%), Dipylidium caninum (2.5%) and Taenia spp. (1.0%). Toxocara canis (67.3%) and C. ohioensis (47.3%) showed higher positivity in the puppies. The Willis-Mollay technique was more efficient in the diagnosis of Ancylostoma spp. and T. canis eggs. The Direct method was the least efficient. It was found that the majority of the cases of D. caninum were diagnosed by the Sedimentation method (8=2.0%), while for T. vulpis Willis-Mollay (12=3.0%) and Sedimentation (13=3.2%) were more efficient. In view of these results, we can recommend the association of Willis-Mollay and Sedimentation methods for the diagnosis of gastrointestinal helminths. Due to the elevated occurrence of Ancylostoma spp. and T. canis, which are involved in zoonotic diseases, it becomes necessary to apply more efficient prophylaxis of canine intestinal parasitosis at the City of Araçatuba, state of São Paulo.

Efficacy of homeopathic treatment against natural infection of sheep by gastrointestinal nematodes.

The efficacy of the homeopathic treatment with the Fator Vermes, administered according to the manufacturer's recommendations, was evaluated against gastrointestinal nematodes infections in sheep. The experiment was divided into two phases: in the first phase (January/06/2004 to April/30/2004), the animals of the treated (n=10) and control (n=10) groups were treated individually with conventional anthelmintics to avoid deaths. In the second phase (April/30/2004 to July/06/2004), the sheep from the group that received the Fator Vermes were treated as they had been in the previous phase, while the control group animals were treated with conventional anthelmintics at 14 day intervals. In the first phase of the experiment, there was no significant difference (P>0.05) between group means regarding egg counts in feces (EPG), weight gain, or packed cell volume (PCV). Meanwhile, in the second phase, the control group sheep had a significantly higher weight gain, higher PCV values, and lower EPG counts. Infective larvae of Haemonchus spp., Trichostrongylus spp., Cooperia spp., and Oesophagostomum spp. were identified in the fecal cultures. After six months of daily treatment with the Fator Vermes, it was not possible to substantiate the product's benefits in both sheep health and productivity or in the prophylaxis of gastrointestinal nematode infections.

Recurrent neural network for induction motor speed estimation in industry applications

Many electronic drivers for the induction motor control are based on sensorless technologies. The proposal of this work Is to present an alternative approach of speed estimation, from transient to steady state, using artificial neural networks. The inputs of the network are the RMS voltage, current and speed estimated of the induction motor feedback to the input with a delay of n samples. Simulation results are also presented to validate the proposed approach. © 2006 IEEE.

Avaliação do kit TF-Test para o diagnóstico das infecções por parasitas gastrintestinais em ovinos

This study was performed to standardize parasite egg counting in feces of sheep by TF-Test, in addition to compare this test to the Gordon & Whitlock technique (G&W). Twenty-four lambs were artificially infected with Haemonchus contortus throughout 12 weeks. At the end of this time, faecal samples were taken and animals were slaughtered for worm identification and counting. G&W and TF-Test methods were carried out on each fecal sample. Both tests showed Haemonchus eggs in 95.8% of the samples (P>0.05). The correlation coefficients (r) between fecal egg counts (FEC) using G&W × Total Worm Count (TWC) were r=0.52 (not transformed data) and r=0.85 (transformed data); between FEC by TF-Test × TWC were r=0.51 (not transformed data) and r=0.87 (transformed data). Other 100 fecal samples were taken from naturally infected sheep. In these animals, the G&W and TF-Test methods showed 85% and 86% of fecal samples positive for Strongylidea eggs, respectively (P>0.05). Also in those animals, Eimeria oocysts were found in 33% of fecal samples by TF-Test, whereas in the G&W only 12% were positive (P<0.001). For Strongyloides spp., TF-Test showed 15% of positive fecal samples, whereas G&W showed 5% (P<0.05). In conclusion, both methods were efficient to diagnose gastrointestinal nematodes and TF-Test was superior to diagnose oocysts of Eimeria spp. and eggs of Strongyloides spp; conversely, Strongylidea eggs counting using TF-Test was underestimated.

Efeito da adição de probiótico e/ou prebiótico em dietas de leitões desmamados sobre o desempenho, incidência de diarréia e contagem de coliformes totais

In the Experiment 1, 50 pigs weaned at the 21 days were fed with either of five diets: T1 - basal diet; T2 - basal diet + antibiotic; T3 - basal diet + probiotic; T4 - basal diet + prebiotic; T5 - basal diet + simbiotic. The variables studied were body weight, feed intake and feed conversion in the Phase 1 (21 to 43 days), Phase 2 (44 to 57 days), Phase 3 (58 to 70 days) and Total Phase (21 to 70 days). During the performance experiment, a fecal survey score was conducted to verify diarrhea incidence. In the Experiment 2, 44 pigs weaned at 21 days were fed with the same diets of Experiment 1. Pigs were slaughtered at three differents ages (at weaning, at seven and 14 days after weaning). A segment of the small intestine was collected for analisys of total coliformes. The results showed that the best performance was obtained with the utilization of prebiotic and simbiotic. There were not differences in relation to diarrhea incidence among the treatments studied. The addition of probiotic and/or prebiotic in the diet prevented increase of colonization by pathogenic bacterias from seven to 14 days after weaning.

Uso de probiótico em dietas de suínos: Incidência de diarréia, desempenho zootécnico e digestibilidade de rações

Two trials were conducted aiming to of evaluate the effect of probiotic supplementation in pig's diet: Trial 1: diarrhea incidence and performance; Trial 2: feed intake and digestibility. In the Trial 1, forty weaning barrow piglets were distributed in four treatments: T0-basal diet; T100-basal diet +100ppm of probiotic; T200-basal diet +200ppm e T300-basal diet +300ppm. The trial 2 was a digestibility trial, where eight barrow pigs were used, distributed in two treatments: T1-basal diet and T2-basal diet + 200 ppm of same probiotic used in the Experiment 1. In the Period 1 the animals of T0 and T100 groups showed higher diarrhea incidence (P<0.05) than the T200 and T300 groups. The performance of animals of T100 group were lower than other treatment groups (P<0.05). In the Period 2 the T200 and T300 animals, showed better FG ratio than the animals of T0 (P<0.05). In the total period it was not observed significative difference concerning performance, except for DFI. In the trial 2, the animals of treatment T2, showed an increase of feed intake when compared with animals of T1. Digestibility coefficients showed no significative differences among treatments. It was concluded that the addition of 200 and 300 ppm of probiotic in the Period 1 reduces incidences of diarrhea. But, in the total period of trial 1, the performance was similar among treatments. In the trial 2 it was observed better adaptation of animals receiving probiotics which was represented by higher feed intake.

Effects of taper on swimming force and swimmer performance after an experimental ten-week training program

Papoti, M., L.E.B. Martins, S.A. Cunha, A.M. Zagatto, and C.A. Gobatto. Effects of taper on swimming force and swimmer performance after an experimental ten-week training program. J. Strength Cond. Res. 21(2):538-542. 2007.- The purpose of this research was to examine how an 11-day taper after an 8.5-week experimental training cycle affected lactate levels during maximal exercise, mean force, and performance in training swimmers, independent of shaving, psychological changes, and postcompetition effects. Fourteen competition swimmers with shaved legs and torsos were recruited from the São Paulo Aquatic Federation. The training cycle consisted of a basic training period (endurance and quality phases) of 8.5 weeks, with 5,800 m·d -1 mean training volume and 6 d·wk -1 frequency; and a taper period (TP) of 1.5 weeks' duration that incorporated a 48% reduction in weekly volume without altering intensity. Attained swimming force (SF) and maximal performance over 200m maximal swim (Pmax) before and after taper were measured. After taper, SF and Pmax improved 3.6 and 1.6%, respectively (p < 0.05). There were positive correlations (p < 0.05) between SF and Pmax before (r = 0.86) and after (r = 0.83) the taper phase. Peak lactate concentrations after SF were unaltered before (6.79 ± 1.2 mM) and after (7.15 ± 1.8 mM) TP. Results showed that TP improved mean swimming velocity, but not in the same proportion as force after taper, suggesting that there are other factors influencing performance in faster swimming. © 2007 National Strength & Conditioning Association.

Influence of the tool edge geometry on specific cutting energy at high-speed cutting

This paper presents specific cutting energy measurements as a function of the cutting speed and tool cutting edge geometry. The experimental work was carried out on a vertical CNC machining center with 7,500 rpm spindle rotation and 7.5 kW power. Hardened steels ASTM H13 (50 HRC) were machined at conventional cutting speed and high-speed cutting (HSC). TiN coated carbides with seven different geometries of chip breaker were applied on dry tests. A special milling tool holder with only one cutting edge was developed and the machining forces needed to calculate the specific cutting energy were recorded using a piezoelectric 4-component dynamometer. Workpiece roughness and chip formation process were also evaluated. The results showed that the specific cutting energy decreased 15.5% when cutting speed was increased up to 700%. An increase of 1 °in tool chip breaker chamfer angle lead to a reduction in the specific cutting energy about 13.7% and 28.6% when machining at HSC and conventional cutting speed respectively. Furthermore the workpiece roughness values evaluated in all test conditions were very low, closer to those of typical grinding operations (∼0.20 μm). Probable adiabatic shear occurred on chip segmentation at HSC Copyright © 2007 by ABCM.