Generation of two isomers of C5H from the corresponding anions. A theoretically motivated mass spectrometric study

Molecular orbital calculations have predicted the stability of a range of connectivities for the radical C5H potential surface. The most energetically favorable of these include the linear C4CH geometry and two ring-chain structures HC2C3 and C2C3H The corresponding anions are also shown to be theoretically stable, and furthermore, a fourth isomer, C2CHC2, is predicted to be the most stable anion connectivity. These results have motivated experimental efforts. Methodologies for the generation of the non-ring-containing isomeric anions C4CH and C2CHC2 have been developed utilizing negative ion mass spectrometry. The absolute connectivities of the anions have been established using deuterium labeling, charge reversal, and neutralization reionization techniques. The success of the latter experiment confirms theoretical predictions of stability of the corresponding neutral species. This is the first reported observation of the neutral C2CHC2 species that calculations predict to be substantially less stable than the C4CH connectivity but still bound relative to isomerization processes.

Reactive species in Ar+H2 plasma-aided nanofabrication : two-dimensional discharge modelling

Understanding the generation of reactive species in a plasma is an important step towards creating reliable and robust plasma-aided nanofabrication processes. A two-dimensional fluid simulation of the number densities of surface preparation species in a low-temperature, low-pressure, non-equilibrium Ar+H2 plasma is conducted. The operating pressure and H2 partial pressure have been varied between 70-200 mTorr and 0.1-50%, respectively. An emphasis is placed on the application of these results to nanofabrication. A reasonable balance between operating pressures and H 2 partial pressures that would optimize the number densities of the two working units largely responsible for activation and passivation of surface dangling bonds (Ar+ and H respectively) in order to achieve acceptable rates of surface activation and passivation is obtained. It is found that higher operating pressures (150-200 mTorr) and lower H2 partial pressures (∼5%) are required in order to ensure high number densities of Ar+ and H species. This paper contributes to the improvement of the controllability and predictability of plasma-based nanoassembly processes.

Two-dimensional simulation of nanoassembly precursor species in Ar+H2+C2H2 reactive plasmas

The results of two-dimensional fluid simulation of number densities and fluxes of the main building blocks and surface preparation species involved in nanoassembly of carbon-based nanopatterns in Ar+H2+C2H2 reactive plasmas are reported. It is shown that the process parameters and non-uniformity of surface fluxes of each particular species may affect the targeted nanopattern quality. The results can be used to improve predictability of plasma-aided nanofabrication processes and optimize the parameters of plasma nanotools.KGaA, Weinheim.

Analysis of two authorization protocols using Colored Petri Nets

To prevent unauthorized access to protected trusted platform module (TPM) objects, authorization protocols, such as the object-specific authorization protocol (OSAP), have been introduced by the trusted computing group (TCG). By using OSAP, processes trying to gain access to the protected TPM objects need to prove their knowledge of relevant authorization data before access to the objects can be granted. Chen and Ryan’s 2009 analysis has demonstrated OSAP’s authentication vulnerability in sessions with shared authorization data. They also proposed the Session Key Authorization Protocol (SKAP) with fewer stages as an alternative to OSAP. Chen and Ryan’s analysis of SKAP using ProVerif proves the authentication property. The purpose of this paper was to examine the usefulness of Colored Petri Nets (CPN) and CPN Tools for security analysis. Using OSAP and SKAP as case studies, we construct intruder and authentication property models in CPN. CPN Tools is used to verify the authentication property using a Dolev–Yao-based model. Verification of the authentication property in both models using the state space tool produces results consistent with those of Chen and Ryan.

Chroma Key Theatre : an examination of similarities and divergences in the use of Green Screen in two experimental theatre works

This paper examines the frame as it contributes to the debate on contemporary intermedial theatre and performance practices in light of increasing astriction between filmic and theatrical discourses. Informed by Auslander (1999), Lehmann (2006), and Giesekam (2007), and through an extrapolation of the tenets Eckersall, Gretchen and Scheer identify in the theory of New Media Dramaturgy, it will analyse two recent works of experimental theatre-making. RUFF (2013), a New York produced solo performance by one of the world’s leading female performers, explores her experiences of having a stroke. Total Dik! (2013), produced in Brisbane, Australia, is an interdisciplinary collaborative performance that examines aspects of dictatorship. They are clearly very different works yet there are a number of significant theatrical similarities in their use of Chroma Key technology and live compositing as material scenic devices. These works overtly and evocatively draw on the cinematic technique and technology of Chroma Key to augment and reveal the tensions and overlaps in their production processes.

Teaching peer review reflective processes in accounting

A well designed peer review process in higher education subjects can lead to more confident and reflective learners who become skilled at making independent judgements of their own and others’ work; essential requirements for successful lifelong learning. The challenge for educators is to ensure their students gain these important graduate attributes within the constraints of a range of internal and external tensions currently facing higher education systems, including, respectively, the realities of large undergraduate Accounting subjects, culturally diverse and time-poor academics and students, and increased calls for public accountability of the Higher Education sector by groups such as the OECD. Innovative curriculum and assessment design and collaborative technologies have the capacity to simultaneously provide some measure of relief from these internal and external tensions and to position students as responsible partners in their own learning. This chapter reports on a two phase implementation of an online peer review process as part of the assessment in a large, under-graduate, International Accounting class. Phase One did not include explicit reflective strategies within the process, and anonymous and voluntary student views served to clearly highlight that students were ‘confused’ and ‘hesitant’ about moving away from their own ideas; often mistrusting the conflicting advice received from multiple peer reviewers. A significant number of students also felt that they did not have the skills to constructively review the work of their peers. Phase Two consequently utilised the combined power of e-Technology, peer review feedback and carefully scaffolded and supported reflective practices from Ryan and Ryan’s Teaching and Assessing Reflective Learning (TARL) model (see Chap. 2). Students found the reflective skills support workshop introduced in Phase Two to be highly useful in maximising the benefits of the peer review process, with 83 % reporting it supported them in writing peer reviews, while 90 % of the respondents reporting the workshop supported them in utilising peer and staff feedback.

Can’t we all just get along? A qualitative investigation of the cognitive processes motivating driver aggression.

Although driver aggression has been identified as contributing to crashes, current understanding of the fundamental causes of the behaviour is poor. Two key reasons for this are evident. Firstly, existing research has been largely atheoretical, with no unifying conceptual framework guiding investigation. Secondly, emphasis on observable behaviours has resulted in limited knowledge of the underlying thought processes that motivate behaviour. Since driving is fundamentally a social situation, requiring drivers to interpret on-road events, insight regarding these perception and appraisal processes is paramount in advancing understanding of the underlying causes. Thus, the current study aimed to explore the cognitive appraisal processes involved in driver aggression, using a conceptual model founded on the General Aggression Model (Anderson & Bushman, 2002). The present results reflect the first of several studies testing this model. Participants completed 3 structured driving diaries to explore perceptions and cognitions. Thematic analysis of diaries identified several cognitive themes. The first, ‘driving etiquette’ concerned an implied code of awareness and consideration for other motorists, breaches of which were strongly associated with reports of anger and frustration. Such breaches were considered intentional; attributed to dispositional traits of another driver, and precipitated the second theme, ‘justified retaliation’. This theme showed that drivers view their aggressive behaviour as warranted, to convey criticism towards another motorist’s etiquette violation. However, the third theme, ‘superiority’ suggested that those refraining from an aggressive response were motivated by a desire to perceive themselves as ‘better’ than the offending motorists. Collectively, the themes indicate deep-seated and complex thought patterns underlying driver aggression, and suggest the behaviour will be challenging to modify. Implications of these themes in relation to the proposed model will be discussed, and continued research will explore these cognitive processes further, to examine their interaction with person-related factors.

Importance of knowledge management processes in a project-based organization : a case study of research enterprise

Knowledge Management (KM) is vital factor to successfully undertake projects. The temporary nature of projects necessitates employing useful KM practices for tackling issues such as knowledge leakiness and rework. The Project Management Office (PMO) is a unit within organizations to facilitate and oversee organizational projects. Project Management Maturity Models (PMMM) shows the development of PMOs from immature to mature levels. The existing PMMMs have focused on discussing Project Management (PM) practices, however, the management of project knowledge is yet to be addressed, at various levels of maturity. This research project was undertaken to investigate the mentioned gap for addressing KM practices at the existing PMMMs. Due to the exploratory and inductive nature of this research, qualitative methods were chosen as the research methodology. In total, three cases selected from different industries: research; mining and government organizations, to provide broad categories for research and research questions were examined using the developed framework. This paper presents the partial findings of undertaken investigation of the research organisation with the lowest level of maturity. The result shows that knowledge creation and capturing are the most important processes, while knowledge transferring and reusing are not as important as the other two processes. In addition, it was revealed that provision of “knowledge about client” and “project management knowledge” are the most important types of knowledge that are required at this level of maturity. In conclusion, the outcomes of this paper shall provide powerful guidance to PMOs at lowest level of maturity from KM point of view.

Hydrochemical evolution and groundwater flow processes in the Galilee and Eromanga basins, Great Artesian Basin, Australia: A multivariate statistical approach

The Galilee and Eromanga basins are sub-basins of the Great Artesian Basin (GAB). In this study, a multivariate statistical approach (hierarchical cluster analysis, principal component analysis and factor analysis) is carried out to identify hydrochemical patterns and assess the processes that control hydrochemical evolution within key aquifers of the GAB in these basins. The results of the hydrochemical assessment are integrated into a 3D geological model (previously developed) to support the analysis of spatial patterns of hydrochemistry, and to identify the hydrochemical and hydrological processes that control hydrochemical variability. In this area of the GAB, the hydrochemical evolution of groundwater is dominated by evapotranspiration near the recharge area resulting in a dominance of the Na–Cl water types. This is shown conceptually using two selected cross-sections which represent discrete groundwater flow paths from the recharge areas to the deeper parts of the basins. With increasing distance from the recharge area, a shift towards a dominance of carbonate (e.g. Na–HCO3 water type) has been observed. The assessment of hydrochemical changes along groundwater flow paths highlights how aquifers are separated in some areas, and how mixing between groundwater from different aquifers occurs elsewhere controlled by geological structures, including between GAB aquifers and coal bearing strata of the Galilee Basin. The results of this study suggest that distinct hydrochemical differences can be observed within the previously defined Early Cretaceous–Jurassic aquifer sequence of the GAB. A revision of the two previously recognised hydrochemical sequences is being proposed, resulting in three hydrochemical sequences based on systematic differences in hydrochemistry, salinity and dominant hydrochemical processes. The integrated approach presented in this study which combines different complementary multivariate statistical techniques with a detailed assessment of the geological framework of these sedimentary basins, can be adopted in other complex multi-aquifer systems to assess hydrochemical evolution and its geological controls.

No child’s play: Recognising the agency of former child soldiers in peace building processes

Engaging with the emerging discourse on children that recognises childhood as culturally specific and that children actively engage with their environment, this paper questions the dominant discourse’s view of children as passive recipients of socialisation. This paper argues that the discourse on children’s agency is a more useful framework for understanding the experiences of former child soldiers and that engaging meaningfully with this discourse will both improve life outcomes and reduce the risk of ongoing instability. This argument is made by an examination of the two discourses; examining their development and arguing for the usefulness of the agency discourse. This provides for an examination of children’s agency in education and skills training programs and of their political involvement (or marginalisation) in three conflicts: Colombia, Sierra Leone and Uganda. Recognising children as agents and engaging with how they navigate their lived experiences after involvement in conflict testifies to children’s resilience and their desire for change. Challenging the dominant discourse through the agency discourse allows for the acknowledgement of former child soldiers as both social and political agents in their own right and of their potential for contributing to stable and lasting peace.

Change visualisation: Analysing the resource and timing differences between two event logs

With organisations facing significant challenges to remain competitive, Business Process Improvement (BPI) initiatives are often conducted to improve the efficiency and effectiveness of their business processes, focussing on time, cost, and quality improvements. Event logs which contain a detailed record of business operations over a certain time period, recorded by an organisation's information systems, are the first step towards initiating evidence-based BPI activities. Given an (original) event log as a starting point, an approach to explore better ways to execute a business process was developed, resulting in an improved (perturbed) event log. Identifying the differences between the original event log and the perturbed event log can provide valuable insights, helping organisations to improve their processes. However, there is a lack of automated techniques to detect the differences between two event logs. Therefore, this research aims to develop visualisation techniques to provide targeted analysis of resource reallocation and activity rescheduling. The differences between two event logs are first identified. The changes between the two event logs are conceptualised and realised with a number of visualisations. With the proposed visualisations, analysts will then be able to identify the changes related to resource and time, resulting in a more efficient business process. Ultimately, analysts can make use of this comparative information to initiate evidence-based BPI activities.

A longitudinal investigation of coping processes during a merger: Implications for job satisfaction and organizational identification

This study tested the utility of a stress and coping model of employee adjustment to a merger. Two hundred and twenty employees completed both questionnaires (Time 1: 3 months after merger implementation; Time 2: 2 years later). Structural equation modeling analyses revealed that positive event characteristics predicted greater appraisals of self-efficacy and less stress at Time 1. Self-efficacy, in turn, predicted greater use of problem-focused coping at Time 2, whereas stress predicted a greater use of problem-focused and avoidance coping. Finally, problem-focused coping predicted higher levels of job satisfaction and identification with the merged organization (Time 2), whereas avoidance coping predicted lower identification.

Seasonal and spatial variations in rare earth elements to identify inter-aquifer linkages and recharge processes in an Australian catchment

With the aim of elucidating the seasonal behaviour of rare earth elements (REEs), surface and groundwaters were collected under dry and wet conditions in different hydrological units of the Teviot Brook catchment (Southeast Queensland, Australia). Sampled waters showed a large degree of variability in both REE abundance and normalised patterns. Overall REE abundance ranged over nearly three orders of magnitude, and was consistently lower in the sedimentary bedrock aquifer (18ppt<∑REE<477ppt) than in the other hydrological systems studied. Abundance was greater in springs draining rhyolitic rocks (∑REE=300 and 2054ppt) than in springs draining basalt ranges (∑REE=25 and 83ppt), yet was highly variable in the shallow alluvial groundwater (16ppt<∑REE<5294ppt) and, to a lesser extent, in streamwater (85ppt<∑REE<2198ppt). Generally, waters that interacted with different rock types had different REE patterns. In order to obtain an unbiased characterisation of REE patterns, the ratios between light and middle REEs (R(M/L)) and the ratios between middle and heavy REEs (R(H/M)) were calculated for each sample. The sedimentary bedrock aquifer waters had highly evolved patterns depleted in light REEs and enriched in middle and heavy REEs (0.17processes and inter-aquifer mixing. They also underline the importance of conducting seasonal sampling campaigns to capture possible short-term variations in REE patterns and abundance, which is essential to enable a better understanding of hydrological and hydrochemical processes in complex geological settings

Characterization of alluvial formation by stochastic modelling of paleo-fluvial processes: The concept and method

Modelling fluvial processes is an effective way to reproduce basin evolution and to recreate riverbed morphology. However, due to the complexity of alluvial environments, deterministic modelling of fluvial processes is often impossible. To address the related uncertainties, we derive a stochastic fluvial process model on the basis of the convective Exner equation that uses the statistics (mean and variance) of river velocity as input parameters. These statistics allow for quantifying the uncertainty in riverbed topography, river discharge and position of the river channel. In order to couple the velocity statistics and the fluvial process model, the perturbation method is employed with a non-stationary spectral approach to develop the Exner equation as two separate equations: the first one is the mean equation, which yields the mean sediment thickness, and the second one is the perturbation equation, which yields the variance of sediment thickness. The resulting solutions offer an effective tool to characterize alluvial aquifers resulting from fluvial processes, which allows incorporating the stochasticity of the paleoflow velocity.

Complex Symbolic Sequence Encodings for Predictive Monitoring of Business Processes

This paper addresses the problem of predicting the outcome of an ongoing case of a business process based on event logs. In this setting, the outcome of a case may refer for example to the achievement of a performance objective or the fulfillment of a compliance rule upon completion of the case. Given a log consisting of traces of completed cases, given a trace of an ongoing case, and given two or more possible out- comes (e.g., a positive and a negative outcome), the paper addresses the problem of determining the most likely outcome for the case in question. Previous approaches to this problem are largely based on simple symbolic sequence classification, meaning that they extract features from traces seen as sequences of event labels, and use these features to construct a classifier for runtime prediction. In doing so, these approaches ignore the data payload associated to each event. This paper approaches the problem from a different angle by treating traces as complex symbolic sequences, that is, sequences of events each carrying a data payload. In this context, the paper outlines different feature encodings of complex symbolic sequences and compares their predictive accuracy on real-life business process event logs.